Analysis And Innovation On Rdf Dryer Machine. Abstract: The function of vibration is to smooth the flow of hot air into the Refuse Derived Fuel (RDF) which is put on the drying trays, so during drying process the door of drying chamber are not necessarily to be opened. The vibration components are placed just below the drying trays and consist of electrical motor, spring, total mass and unbalance mass which is connected to the motor shaft. RDF Dryer machine in this research would not take heat energy from coal fuel but from dried RDF fuel through shell and tube heat exchanger. Beside that, the research would not take electrical energy from government company but from micro hydro power plant. The objective of this research is to perform analysis and innovation on RDF dryer machine. This research uses observation, analysis and innovation methods and the material tested in the drying chamber was RDF. The total length of the RDF dryer machine is 5.8 m and its drying chamber has a dimension of: Length 4 m, Width 3 m, and Height 2 m. Based on the analysis and innovation result the optimal motion of the samples being dried occurred at angular speed near its natural frequency. Analysis heat Transfer was obtained that the average air temperature in the drying chamber could be achieved by the utilization of shell and tube heat exchanger. Shell and tube heat exchanger was made of aluminium material with a thickness of each material of 0.001 m. Analysis electrical energy was obtained that electrical power output more than required electrical energy by RDF dryer machine

Firman, La Ode Mohammad; Lesmana, I Gede Eka; Pane, Erlanda Augupta; Ismail

Analysis And Innovation On Rdf Dryer Machine. Abstract: The function of vibration is to smooth the flow of hot air into the Refuse Derived Fuel (RDF) which is put on the drying trays, so during drying process the door of drying chamber are not necessarily to be opened. The vibration components are placed just below the drying trays and consist of electrical motor, spring, total mass and unbalance mass which is connected to the motor shaft. RDF Dryer machine in this research would not take heat energy from coal fuel but from dried RDF fuel through shell and tube heat exchanger. Beside that, the research would not take electrical energy from government company but from micro hydro power plant. The objective of this research is to perform analysis and innovation on RDF dryer machine. This research uses observation, analysis and innovation methods and the material tested in the drying chamber was RDF. The total length of the RDF dryer machine is 5.8 m and its drying chamber has a dimension of: Length 4 m, Width 3 m, and Height 2 m. Based on the analysis and innovation result the optimal motion of the samples being dried occurred at angular speed near its natural frequency. Analysis heat Transfer was obtained that the average air temperature in the drying chamber could be achieved by the utilization of shell and tube heat exchanger. Shell and tube heat exchanger was made of aluminium material with a thickness of each material of 0.001 m. Analysis electrical energy was obtained that electrical power output more than required electrical energy by RDF dryer machine

La Ode Mohammad Firman (), I Gede Eka Lesmana, Erlanda Augupta Pane and Ismail
Additional contact information
La Ode Mohammad Firman: Centre of Excellence in New and Renewable Energy, Faculty of Engineering, Universitas Pancasila
I Gede Eka Lesmana: Department of Mechanical Engineering, Faculty of Engineering, Universitas Pancasila, Jakarta, Indonesia.
Erlanda Augupta Pane: Department of Mechanical Engineering, Faculty of Engineering, Universitas Pancasila, Jakarta, Indonesia.
Ismail: Department of Mechanical Engineering, Faculty of Engineering, Universitas Pancasila, Jakarta, Indonesia.

Journal of Mechanical Engineering Research & Developments (JMERD), 2018, vol. 41, issue 3, 102-105

Keywords: Dryer machine; Electrical energy; Heat transfer; RDF; Vibration. (search for similar items in EconPapers)
Date: 2018
References: View complete reference list from CitEc
Citations:

Downloads: (external link)
https://jmerd.org.my/download/3488/ (application/pdf)

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:zib:zjmerd:v:41:y:2018:i:3:p:102-105

DOI: 10.26480/jmerd.03.2018.102.105

Access Statistics for this article

Journal of Mechanical Engineering Research & Developments (JMERD) is currently edited by Distinguished Prof. T M Indra Mahlia

More articles in Journal of Mechanical Engineering Research & Developments (JMERD) from Zibeline International Publishing
Bibliographic data for series maintained by Zibeline International Publishing ( this e-mail address is bad, please contact ).