Metal hydride-based cooling system for fuel cell electric vehicles: Achieving a temperature lift of 40 K

Alexander Wimmer, Marc Linder and Inga Bürger

Applied Energy, 2025, vol. 398, issue C, No S0306261925011262

Abstract: The open metal hydride cooling system (MHCS) is a promising technology to recover compression energy required to fill the pressure tank of a fuel cell electric vehicle. By means of the thermochemical reaction of hydrogen with metal hydrides, the MHCS directly converts the available pressure difference into a heat pump effect to replace the conventional energy-consuming air-conditioning. Previously published studies already demonstrated a high specific power under vehicle-relevant operation. However, only a maximum temperature lift of 20 K was achieved so far, that is considered as too low for application as a vehicle air-conditioner. In order to achieve a high temperature lift, the underlaying thermochemical reaction behavior requires a high pressure ratio. To further reach a high specific power and efficiency at elevated temperature lifts, additionally the applied reactor has to facilitate a high heat transfer and low heat capacity. Thus, in this study experimental investigations using a high pressure ratio of 70 to 5 bar are conducted with a proven reactor-material setup. The comprehensive characterization on different discharge rates show a maximum specific cooling power of 386 W/kgMH at a temperature lift of 30 K and 229 W/kgMH at 40 K, where application-relevant temperatures of 5 °C for the cooling side and 45 °C for rejection side are reached. On the basis of these results a scaling of the lab-scale reactor is calculated revealing a total efficiency improvement on vehicle level in the order of 5 % using the open MHCS.

Keywords: Mobile application, air-conditioning; Heat pump; Pressure ratio; Energy recovery; Efficiency increase (search for similar items in EconPapers)
Date: 2025
References: Add references at CitEc
Citations:

Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S0306261925011262
Full text for ScienceDirect subscribers only

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:eee:appene:v:398:y:2025:i:c:s0306261925011262

Ordering information: This journal article can be ordered from
http://www.elsevier.com/wps/find/journaldescription.cws_home/405891/bibliographic
http://www.elsevier. ... 405891/bibliographic

DOI: 10.1016/j.apenergy.2025.126396

Access Statistics for this article

Applied Energy is currently edited by J. Yan

More articles in Applied Energy from Elsevier
Bibliographic data for series maintained by Catherine Liu ().