Acoustic emission-based wind turbine blade icing monitoring using deep learning technology

Lei Jiang, Shi Ping Zhang, Guo Qing Shen and Ling Zhou

Renewable Energy, 2025, vol. 247, issue C

Abstract: Blade icing on wind turbines can significantly affect the efficiency, safety, and sustainable operation of wind energy systems. However, the existing blade icing monitoring methods face certain limitations, such as delayed response, low accuracy, environmental interference, and compromised aerodynamic performance. Although acoustic emission (AE) technology has demonstrated its effectiveness in structural health monitoring of wind turbine blades such as crack and delamination, this study attempts to extend its application by introducing a novel real-time monitoring system for blade icing detection. Through theoretical analysis, this study reveals that acoustic emission signals are generated during blade icing process, particularly at the initial icing and final melting stages, due to stress variations caused by centrifugal force, aerodynamic load, and gravity during blade rotation. The acoustic impedance analysis further demonstrates that these AE signals can be effectively transmitted from ice layer to internal sensors owing to the similar acoustic impedance characteristics between ice and blade materials, validating the feasibility of internal wall sensor placement. A small-scale experimental system is designed to collect acoustic emission signals under normal operation, icing, and rainy conditions. The time-frequency domain analysis reveals distinct spectral characteristics - icing conditions show significant peaks in the 147 kHz–190 kHz band, whereas rain signals are concentrated in the low-frequency region of 6 kHz–9 kHz. The symplectic geometry mode decomposition (SGMD) is employed for signal processing, and an optimal reconstruction scheme combining the SGC1 and SGC2 components is designed, effectively preserving the key signal features (i.e., the correlation coefficient of more than 0.95, and the amplitude retention rate higher than 90 %) while reducing noise interference. Various deep learning models, including the convolutional neural network, long-short term model, and two versions of the Transformer network, are employed for state recognition. The results indicate that they can all achieve average recognition accuracy exceeding 99.5 % with a standard deviation below 0.001. The Transformer model demonstrates superior performance over the other models, with 99.89 % accuracy and a high computational efficiency of 0.09 s·epoch−1. This method effectively addresses key limitations of existing monitoring approaches by enabling early detection, avoiding aerodynamic interference, and achieving reliable discrimination between icing and environmental interference, providing an innovative technical solution for enhancing wind farm operational safety and economic benefits.

Keywords: Wind turbine blade; Icing monitoring; Acoustic emission; Symplectic geometry mode decomposition; Deep learning (search for similar items in EconPapers)
Date: 2025
References: Add references at CitEc
Citations:

Downloads: (external link)
http://www.sciencedirect.com/science/article/pii/S0960148125006421
Full text for ScienceDirect subscribers only

Related works:
This item may be available elsewhere in EconPapers: Search for items with the same title.

Export reference: BibTeX RIS (EndNote, ProCite, RefMan) HTML/Text

Persistent link: https://EconPapers.repec.org/RePEc:eee:renene:v:247:y:2025:i:c:s0960148125006421

DOI: 10.1016/j.renene.2025.122980

Access Statistics for this article

Renewable Energy is currently edited by Soteris A. Kalogirou and Paul Christodoulides

More articles in Renewable Energy from Elsevier
Bibliographic data for series maintained by Catherine Liu ().