Journal of Industrial Ecology

1997 - 2025

Current editor(s): Reid Lifset

From Yale University
Bibliographic data for series maintained by Wiley Content Delivery ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 27, issue 6, 2023

Winners of the 2022 Graedel Prizes: The Journal of Industrial Ecology Best Paper Prizes pp. 1426-1428

Chris Kennedy and Richard Wood

The role of supply chains for the sustainability transformation of global food systems: A large‐scale, systematic review of food cold chains pp. 1429-1446

Philipp A. Trotter, Tristan Becker, Renaldi Renaldi, Xinfang Wang, Radhika Khosla and Grit Walther

The environmental performance of plastic packaging waste management in Germany: Current and future key factors pp. 1447-1460

Sarah Schmidt and David Laner

Life cycle assessment of in‐person, virtual, and hybrid academic conferences: New evidence and perspectives pp. 1461-1475

Antonio Cavallin Toscani, Atalay Atasu, Luk N. Van Wassenhove and Andrea Vinelli

Value‐based bricolage: Resource mobilization in the circular economy pp. 1476-1487

Sascha P. Klein, Verena Liszt‐Rohlf and Patrick Spieth

Structural attribution of emissions along the global supply chain and implications for climate policy pp. 1488-1499

Shohei Tokito, Tesshu Hanaka and Fumiya Nagashima

Unraveling the complexity of extended producer responsibility policy mix design, implementation, and transfer dynamics in the European Union pp. 1500-1520

Jakob T. Pruess

Toward global and national toxicity footprints pp. 1521-1537

Alexandra Leclerc, Etienne Berthet, Konstantin Stadler, Richard Wood and Alexis Laurent

Seven decades of plastic flows and stocks in the United States and pathways toward zero plastic pollution by 2050 pp. 1538-1552

Mengqing Kan, Chunyan Wang, Bing Zhu, Wei‐Qiang Chen, Yi Liu, Yucheng Ren and Ming Xu

Characterizing the spatiotemporal evolution of building material stock in China's Greater Bay Area: A statistical regression method pp. 1553-1566

Liang Yuan, Weisheng Lu and Yijie Wu

Using quantitative storytelling to identify constraints in resource supply: The case of brown seaweed pp. 1567-1578

Maddalen Ayala, Marianne Thomsen and Massimo Pizzol

Carbon‐neutral pathways to 2050 for Japan's aviation industry in the absence of a mass supply of sustainable aviation fuels pp. 1579-1592

Minami Kito, Hirotaka Takayabu and Keisuke Nansai

“A fine wine, better with age”: Circular economy historical roots and influential publications: A bibliometric analysis using Reference Publication Year Spectroscopy (RPYS) pp. 1593-1612

Chembessi Chedrak, Gohoungodji Paulin and Juste Rajaonson

Consumer practices regarding the purchase, use, willingness to repair, and disposal of small electric and electronic equipment: A Spanish survey on kettles pp. 1613-1625

Sonia Sandez, Valeria Ibáñez‐Forés, Victoria Pérez‐Belis, Pablo Juan and María D. Bovea

Chinese cities exhibit diverse allometric growth patterns in material metabolism pp. 1626-1638

Mingyue Yang, Ningyin Liu, Xinjing Wang and Yan Zhang

Life cycle assessment of pig iron production from bauxite residue: A European case study pp. 1639-1652

Yan Ma and Johan Berg Pettersen

Volume 27, issue 5, 2023

Agent‐based modeling and simulation for the circular economy: Lessons learned and path forward pp. 1227-1238

Julien Walzberg, Jean‐Marc Frayret, Annika L. Eberle, Alberta Carpenter and Garvin Heath

Circular economy: A new research field? pp. 1239-1251

Julian Kirchherr, Andrea Urbinati and Kris Hartley

Data implementation matters: Effect of software choice and LCI database evolution on a comparative LCA study of permanent magnets pp. 1252-1265

Brenda Miranda Xicotencatl, René Kleijn, Sander van Nielen, Franco Donati, Benjamin Sprecher and Arnold Tukker

BEVSIM: Battery electric vehicle sustainability impact assessment model pp. 1266-1276

Rajesh Mehta, Milad Golkaram, Jack T. W. E. Vogels, Tom Ligthart, Eugene Someren, Spela Ferjan and Jelmer Lennartz

Should high‐cobalt EV batteries be repurposed? Using LCA to assess the impact of technological innovation on the waste hierarchy pp. 1277-1290

Jessica Dunn, Kabian Ritter, Jesús M. Velázquez and Alissa Kendall

Are future recycling benefits misleading? Prospective life cycle assessment of lithium‐ion batteries pp. 1291-1303

Joris Šimaitis, Stephen Allen and Christopher Vagg

Quantifying a virtual water metabolic network of the Metropolitan District of Quito, Ecuador using ecological network methods pp. 1304-1318

Francisco Orlando Rosales, Brian D. Fath and Grace Yolanda Llerena

Economic and environmental assessment of automotive plastic waste end‐of‐life options: Energy recovery versus chemical recycling pp. 1319-1334

Christoph Stallkamp, Malte Hennig, Rebekka Volk, Frank Richter, Britta Bergfeldt, Salar Tavakkol, Frank Schultmann and Dieter Stapf

Environmental footprinting of hospitals: Organizational life cycle assessment of a Canadian hospital pp. 1335-1353

Alexander Cimprich and Steven B. Young

Monitoring the consumption footprint of countries to support policy‐making: An assessment of data availability in Germany pp. 1354-1369

Philip Nuss, Esther Sanyé‐Mengual and Serenella Sala

Recycling plastics from e‐waste: Implications for effective eco‐design pp. 1370-1388

Ceri Fenwick, Kieren Mayers, Jacquetta Lee and Richard Murphy

Drivers of urban metabolism: Toward a framework for urban transformations pp. 1389-1405

Anastasia Papangelou, Jean‐Baptiste Bahers and Lynda Aissani

Transforming existing local ecosystems to circular economy ecosystems for plastics: The case of the PlastiCity ecosystem pp. 1406-1419

Virginie Litaudon and Yiran Chen

Volume 27, issue 4, 2023

Potentials and limits of mechanical plastic recycling pp. 1043-1059

Magdalena Klotz, Melanie Haupt and Stefanie Hellweg

Introducing digital tools for sustainable food supply management: Tackling food loss and waste in industrial canteens pp. 1060-1075

Ludovica Principato, Stefano Marchetti, Marco Barbanera, Luca Ruini, Leonardo Capoccia, Camilla Comis and Luca Secondi

Scaling in urban building energy use and its influencing factors pp. 1076-1088

Chunyan Wang, Hanying Jiang, Hao Wu, Yi Liu, Siyue Guo and Ming Xu

The effect of consumption and production policies on circular economy business models: A machine learning approach pp. 1089-1104

Carlos F. A. Arranz, Caleb Kwong and Vania Sena

Expert elicitation and data noise learning for material flow analysis using Bayesian inference pp. 1105-1122

Jiayuan Dong, Jiankan Liao, Xun Huan and Daniel Cooper

Domestic water versus imported virtual blue water for agricultural production: A comparison based on energy consumption and related greenhouse gas emissions pp. 1123-1136

Georg Smolka, Ervin Kosatica, Markus Berger, Meidad Kissinger, Dor Fridman and Thomas Koellner

A framework to open the black box of the use phase in circular economy life cycle assessments: The case of shell jacket reuse pp. 1137-1150

Hampus André and Anna Björklund

Reflecting the importance of human needs fulfilment in absolute sustainability assessments: Development of a sharing principle pp. 1151-1164

Mia Heide, Michael Z. Hauschild and Morten Ryberg

The Bahamas at risk: Material stocks, sea‐level rise, and the implications for development pp. 1165-1183

Francisco Martin del Campo, Simron Jit Singh, Tomer Fishman, Adelle Thomas and Michael Drescher

Avoiding investment in fossil fuel assets pp. 1184-1196

Christopher A. Kennedy, Martin Sers and Michael I. Westphal

Biophysical economic interpretation of the Great Depression: A critical period of an energy transition pp. 1197-1211

Christopher A. Kennedy

Characterizing IT asset disposition flows for the circular economy: A case study on export for reuse from Ireland pp. 1212-1222

Kathleen McMahon, Chidinma Uchendu and Colin Fitzpatrick

Volume 27, issue 3, 2023

Material flows and embodied energy of direct air capture: A cradle‐to‐gate inventory of selected technologies pp. 646-661

Balint Simon

An integrative and prospective approach to regional material flow analysis: Modeling the decarbonization of the North Rhine‐Westphalian steel industry pp. 662-675

Rainer Radloff, Ali Abdelshafy and Grit Walther

Scheme for generating upscaling scenarios of emerging functional materials based energy technologies in prospective LCA (UpFunMatLCA) pp. 676-692

Steffi Weyand, Kotaro Kawajiri, Claudiu Mortan and Liselotte Schebek

Extending effectiveness to efficiency: Comparing energy and environmental assessment methods for a wet cooling tower pp. 693-706

Paula M. Wenzel and Peter Radgen

Methodological framework to find links between life cycle sustainability assessment categories and the UN Sustainable Development Goals based on literature pp. 707-725

Marwa B. Hannouf, Alejandro Padilla‐Rivera, Getachew Assefa and Ian Gates

A consequential approach to life cycle sustainability assessment with an agent‐based model to determine the potential contribution of chemical recycling to UN Sustainable Development Goals pp. 726-745

Raoul Voss, Roh Pin Lee and Magnus Fröhling

Evaluating sustainability impacts of critical mineral extractions: Integration of life cycle sustainability assessment and SDGs frameworks pp. 746-759

Datu Buyung Agusdinata, Wenjuan Liu, Sinta Sulistyo, Philippe LeBillon and Je'anne Wegner

Assessing the social dimension in strategic network optimization for a sustainable development: The case of bioethanol production in the EU pp. 760-776

Lukas Messmann, Lars Wietschel, Andrea Thorenz and Axel Tuma

The role of raw materials to achieve the Sustainable Development Goals: Tracing the risks and positive contributions of cobalt along the lithium‐ion battery supply chain pp. 777-794

Lígia da Silva Lima, Louise Cocquyt, Lucia Mancini, Erasmo Cadena and Jo Dewulf

Green batteries for clean skies: Sustainability assessment of lithium‐sulfur all‐solid‐state batteries for electric aircraft pp. 795-810

Alexander Barke, Walter Cistjakov, Dominik Steckermeier, Christian Thies, Jan‐Linus Popien, Peter Michalowski, Sofia Pinheiro Melo, Felipe Cerdas, Christoph Herrmann, Ulrike Krewer, Arno Kwade and Thomas S. Spengler

Castoff from the West, pearls in Kantamanto? A critique of second‐hand clothes trade pp. 811-821

Lydia Ayorkor Manieson and Tiziana Ferrero‐Regis

“When we got divorced, I left all my things behind.”: How the lifespan of household goods is linked to the biographical trajectory of their owners pp. 822-833

Julie Madon

Product label identification with OCR for model‐specific reuse, repair, and recycling: A case study for washing machines pp. 834-844

Wouter Sterkens, Ellen Bracquené, Dillam Jossue Díaz‐Romero, Toon Goedemé, Wim Dewulf and Jef R. Peeters

A matter of timing: System requirements for repair and their temporal dimensions pp. 845-855

Jennifer D. Russell, Sahra Svensson‐Hoglund, Jessika Luth Richter, Carl Dalhammar and Leonidas Milios

Evaluating the cascading‐use of wood furniture: How value‐retention processes can contribute to material efficiency and circularity pp. 856-867

Jennifer D. Russell, Kendria Huff and Eva Haviarova

Taking stock for repair and refurbishing: A review of harvesting of spare parts from electrical and electronic products pp. 868-881

Jessika Luth Richter, Sahra Svensson‐Hoglund, Carl Dalhammar, Jennifer D. Russell and Åke Thidell

Sharing economy rebound: The case of peer‐to‐peer sharing of food waste pp. 882-895

Tamar Meshulam, David Font‐Vivanco, Vered Blass and Tamar Makov

Carbon and water conservation value of independent, place‐based repair in Lima, Peru pp. 896-907

Josh Lepawsky, Kathia Cáceres, Marco Gusukuma and Ramzy Kahhat

Until death do us part? In‐depth insights into Dutch consumers’ considerations about product lifetimes and lifetime extension pp. 908-922

Renske van den Berge, Lise Magnier and Ruth Mugge

Smartphone repairability indexes in practice: Linking repair scores to industrial design features pp. 923-936

Mário Barros and Eric Dimla

Exploring the emergence of waste recovery and exchange in industrial clusters pp. 937-950

Shiva Noori, Gijsbert Korevaar, Rob Stikkelman and Andrea Ramírez

Driving reactive nitrogen emissions in China: Competition between scale and efficiency pp. 951-963

Yunfeng Huang, Shenghui Cui, Bing Gao, Wei Huang, Shuangying Han and Yuanchao Hu

Lithium‐ion battery cell production in Europe: Scenarios for reducing energy consumption and greenhouse gas emissions until 2030 pp. 964-976

Florian Degen

How much sorting is required for a circular low carbon aluminum economy? pp. 977-992

Julien Pedneault, Guillaume Majeau‐Bettez and Manuele Margni

Cost versus environment? Combined life cycle, techno‐economic, and circularity assessment of silicon‐ and perovskite‐based photovoltaic systems pp. 993-1007

Neill Bartie, Lucero Cobos‐Becerra, Florian Mathies, Janardan Dagar, Eva Unger, Magnus Fröhling, Markus A. Reuter and Rutger Schlatmann

Comparative life cycle assessment of graphitic carbon nitride synthesis routes pp. 1008-1020

Nathalia Aquino de Carvalho and Leanne M. Gilbertson

Impact of urbanization on construction material consumption: A global analysis pp. 1021-1036

Georg Schiller and Julia Roscher

Volume 27, issue 2, 2023

Three research priorities for just and sustainable urban systems: Now is the time to refocus pp. 382-394

Joe F. Bozeman, Shauhrat S. Chopra, Philip James, Sajjad Muhammad, Hua Cai, Kangkang Tong, Maya Carrasquillo, Harold Rickenbacker, Destenie Nock, Weslynne Ashton, Oliver Heidrich, Sybil Derrible and Melissa Bilec

A bottom‐up ontology‐based approach to monitor circular economy: Aligning user expectations, tools, data and theory pp. 395-407

Rusne Sileryte, Alexander Wandl and Arjan van Timmeren

Developing a material flow monitor for the Netherlands from national statistical data pp. 408-422

Roel Delahaye, Vivian S. C. Tunn and Arnold Tukker

Developing Regenerate: A circular economy engagement tool for the assessment of new and existing buildings pp. 423-435

Charles Gillott, Will Mihkelson, Maud Lanau, Dave Cheshire and Danielle Densley Tingley

A review of methods to trace material flows into final products in dynamic material flow analysis: From industry shipments in physical units to monetary input–output tables, Part 1 pp. 436-456

Jan Streeck, Stefan Pauliuk, Hanspeter Wieland and Dominik Wiedenhofer

A review of methods to trace material flows into final products in dynamic material flow analysis: Comparative application of six methods to the United States and EXIOBASE3 regions, Part 2 pp. 457-475

Jan Streeck, Hanspeter Wieland, Stefan Pauliuk, Barbara Plank, Kenichi Nakajima and Dominik Wiedenhofer

Uncovering urban transportation infrastructure expansion and sustainability challenge in Bangkok: Insights from a material stock perspective pp. 476-490

Kronnaphat Khumvongsa, Jing Guo, Suthida Theepharaksapan, Hiroaki Shirakawa and Hiroki Tanikawa

Can a small island nation build resilience? The significance of resource‐use patterns and socio‐metabolic risks in The Bahamas pp. 491-507

Francisco Martin del Campo, Simron Jit Singh, Tomer Fishman, Adelle Thomas, Dominik Noll and Michael Drescher

Thermodynamic rarity of electrical and electronic waste: Assessment and policy implications for critical materials pp. 508-521

Kieran Campbell‐Johnston, Erik Roos Lindgreen, Giovanni Mondello, Teresa Maria Gulotta, Walter J. V. Vermeulen and Roberta Salomone

When does upcycling mitigate climate change? The case of wet spent grains and fruit and vegetable residues in Canada pp. 522-534

Sourabh Jain and Jury Gualandris

Toward a low‐carbon and circular building sector: Building strategies and urbanization pathways for the Netherlands pp. 535-547

Janneke van Oorschot, Benjamin Sprecher, Bart Rijken, Pieter Witteveen, Merlijn Blok, Nico Schouten and Ester van der Voet

Client‐side energy and GHGs assessment of advertising and tracking in the news websites pp. 548-561

Fabio Pesari, Giovanni Lagioia and Annarita Paiano

Analysis of parameters about useful life extension in 70 tools and methods related to eco‐design and circular economy pp. 562-586

Marta Royo, Vicente Chulvi, Elena Mulet and Laura Ruiz‐Pastor

A bottom‐up modeling of metabolism of the residential building system in China toward 2050 pp. 587-600

Ling Zhang, Qingqing Lu, Zengwei Yuan, Songyan Jiang and Huijun Wu

Plastic value chain and performance metric framework for optimal recycling pp. 601-623

Kunle Ibukun Olatayo, Paul T. Mativenga and Annlizé L. Marnewick

Quantifying GHG emissions enabled by capital and labor: Economic and gender inequalities in France pp. 624-636

Antonin Pottier and Gaëlle Le Treut

Volume 27, issue 1, 2023

Lessons, narratives, and research directions for a sustainable circular economy pp. 6-18

Sina Leipold, Anna Petit‐Boix, Anran Luo, Hanna Helander, Machteld Simoens, Weslynne S. Ashton, Callie W. Babbitt, Alba Bala, Catharina R. Bening, Morten Birkved, Fenna Blomsma, Casper Boks, Alessio Boldrin, Pauline Deutz, Teresa Domenech, Navarro Ferronato, Alejandro Gallego‐Schmid, Damien Giurco, Kersty Hobson, Roope Husgafvel, Cynthia Isenhour, Mait Kriipsalu, Donato Masi, Joan Manuel F. Mendoza, Leonidas Milios, Monia Niero, Deepak Pant, Keshav Parajuly, Stefan Pauliuk, Marina P. P. Pieroni, Jessika Luth Richter, Michael Saidani, Marzena Smol, Laura Talens Peiró, Stijn van Ewijk, Walter J. V. Vermeulen, Dominik Wiedenhofer and Bing Xue

A transitions framework for circular business models pp. 19-32

Ebru Susur and Mats Engwall

Streamlined approach for assessing embedded consumption of lithium and cobalt in the United States pp. 33-42

Elisa Alonso, David Pineault and Nedal T. Nassar

A hierarchical Bayesian regression model that reduces uncertainty in material demand predictions pp. 43-55

Karan Bhuwalka, Eunseo Choi, Elizabeth A. Moore, Richard Roth, Randolph E. Kirchain and Elsa A. Olivetti

Estimating carbon footprints from large scale financial transaction data pp. 56-70

Anna Trendl, Anne Owen, Lara Vomfell, Lena Kilian, John Gathergood, Neil Stewart and David Leake

The evolution of biomass flows in Bangladesh (1961–2019): Providing insights for Bangladesh's transition to a sustainable circular bioeconomy pp. 71-83

Afra Bashira Binth Arman, Fridolin Krausmann, Mohammad Mosharraf Hossain and Mohammad Sujauddin

Spatial–temporal dynamics of the built environment toward sustainability: A material stock and flow analysis in Chinese new and old urban areas pp. 84-95

Dong Yang, Mengyuan Dang, Jing Guo, Lingwen Sun, Ruirui Zhang, Feng Han, Feng Shi, Qian Liu and Hiroki Tanikawa

The influence of consumer behavior on the environmental footprint of passenger car tires pp. 96-109

Thomas Hennequin, Mark A. J. Huijbregts and Rosalie van Zelm

High‐resolution mapping of 33 years of material stock and population growth in Germany using Earth Observation data pp. 110-124

Franz Schug, David Frantz, Dominik Wiedenhofer, Helmut Haberl, Doris Virág, Sebastian van der Linden and Patrick Hostert

Does it pay to be science‐based green? The impact of science‐based emission‐reduction targets on corporate financial performance pp. 125-140

David Bendig, Andreas Wagner and Kevin Lau

Quantifying the drivers of long‐term prices in materials supply chains pp. 141-154

Karan Bhuwalka, Randolph E. Kirchain, Elsa A. Olivetti and Richard Roth

Can cost‐effectiveness analysis of control measures for persistent chemicals be improved? A critical evaluation of approaches for assessing “effectiveness” pp. 155-169

Silke Gabbert, Arianne de Blaeij, Joris T. K. Quik, Joost Bakker, Joop de Knecht, Eric Verbruggen and Richard Luit

Data‐driven models employed to waste plastic in China: Generation, classification, and environmental assessment pp. 170-181

Kunsen Lin, Youcai Zhao, Meilan Zhang, Wenjie Shi and Jia‐Hong Kuo

Life cycle greenhouse gas emissions of residential battery storage systems: A German case study pp. 182-195

Daniel Fett, Christoph Fraunholz and Philipp Schneider

The current and potential role of urban metabolism studies to analyze the role of food in urban sustainability pp. 196-209

Louise Guibrunet and Araceli Sánchez Jiménez

Enhancing institutional capacity in a centralized state: The case of industrial water use efficiency in Vietnam pp. 210-222

Tran Thu Trang, Simon R. Bush and Judith van Leeuwen

A social life cycle assessment of vanadium redox flow and lithium‐ion batteries for energy storage pp. 223-237

Maarten Koese, Carlos F. Blanco, Vicente B. Vert and Martina G. Vijver

Coastal sand mining of heavy mineral sands: Contestations, resistance, and ecological distribution conflicts at HMS extraction frontiers across the world pp. 238-253

Arpita Bisht and Joan Martinez‐Alier

Combining industrial ecology tools to assess potential greenhouse gas reductions of a circular economy: Method development and application to Switzerland pp. 254-271

Maja Wiprächtiger, Melanie Haupt, Andreas Froemelt, Magdalena Klotz, Claudio Beretta, Dominik Osterwalder, Vanessa Burg and Stefanie Hellweg

Variability in greenhouse gas footprints of the global wind farm fleet pp. 272-282

Louise Christine Dammeier, Joyce H. C. Bosmans and Mark A. J. Huijbregts

Is energy intensity a driver of structural change? Empirical evidence from the global economy pp. 283-296

Jaime Nieto, Pedro B. Moyano, Diego Moyano and Luis Javier Miguel

Life cycle cost analysis of distributed versus centralized plastic sorting and recycling pp. 297-311

Piya Kerdlap, Aloisius Rabata Purnama, Jonathan Sze Choong Low, Daren Zong Loong Tan, Claire Y. Barlow and Seeram Ramakrishna

Mapping first to final uses for rare earth elements, globally and in the United States pp. 312-322

Elisa Alonso, David G. Pineault, Joseph Gambogi and Nedal T. Nassar

Exploring the global trade networks of the tungsten supply chain: Insights into the physical and monetary mismatch among countries pp. 323-335

Linbin Tang, Peng Wang, Zijie Ma, Stefan Pauliuk, Wei‐Qiang Chen, Tao Dai and Zipeng Lin

Building feature‐based machine learning regression to quantify urban material stocks: A Hong Kong study pp. 336-349

Liang Yuan, Weisheng Lu, Fan Xue and Maosu Li

High‐resolution quantification of building stock using multi‐source remote sensing imagery and deep learning pp. 350-361

Yi Bao, Zhou Huang, Han Wang, Ganmin Yin, Xiao Zhou and Yong Gao

High cost of waste treatment calls for systematic rethinking: A case study for a chemical industrial park in China pp. 362-375

Yizheng Lyu, Kun Yan, Jinping Tian and Lyujun Chen