Journal of Industrial Ecology

1997 - 2025

Current editor(s): Reid Lifset

From Yale University
Bibliographic data for series maintained by Wiley Content Delivery ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 24, issue 6, 2020

Circular economy finance: Clear winner or risky proposition? pp. 1192-1200

Paul Dewick, Magnus Bengtsson, Maurie J. Cohen, Joseph Sarkis and Patrick Schröder

LC‐IMPACT: A regionalized life cycle damage assessment method pp. 1201-1219

Francesca Verones, Stefanie Hellweg, Assumpció Antón, Ligia B. Azevedo, Abhishek Chaudhary, Nuno Cosme, Stefano Cucurachi, Laura de Baan, Yan Dong, Peter Fantke, Laura Golsteijn, Michael Hauschild, Reinout Heijungs, Olivier Jolliet, Ronnie Juraske, Henrik Larsen, Alexis Laurent, Christopher L. Mutel, Manuele Margni, Montserrat Núñez, Mikolaj Owsianiak, Stephan Pfister, Tommie Ponsioen, Philipp Preiss, Ralph K. Rosenbaum, Pierre‐Olivier Roy, Serenella Sala, Zoran Steinmann, Rosalie van Zelm, Rita Van Dingenen, Marisa Vieira and Mark A. J. Huijbregts

Proposal for a new compilation system for metal ores in economy wide material flow accounting pp. 1220-1233

James West, Mirko Lieber, Stephan Lutter and Heinz Schandl

A systematic approach to assess the environmental impact of emerging technologies: A case study for the GHG footprint of CIGS solar photovoltaic laminate pp. 1234-1249

Mitchell K. van der Hulst, Mark A. J. Huijbregts, Niels van Loon, Mirjam Theelen, Lucinda Kootstra, Joseph D. Bergesen and Mara Hauck

Circular value creation architectures: Make, ally, buy, or laissez‐faire pp. 1250-1273

Erik G. Hansen and Ferdinand Revellio

Diffusion of labor standards through supplier–subcontractor networks: An agent‐based model pp. 1274-1286

Stefan Gold, Thomas Chesney, Tim Gruchmann and Alexander Trautrims

The carbon footprint of foreign multinationals within the European Union pp. 1287-1299

Mateo Ortiz, María‐Ángeles Cadarso and Luis‐Antonio López

Is the beneficial use of wood ash environmentally beneficial? A screening‐level life cycle assessment and uncertainty analysis pp. 1300-1309

Caroline Gaudreault, Ilich Lama and Derek Sain

Toward a cell‐chemistry specific life cycle assessment of lithium‐ion battery recycling processes pp. 1310-1322

Marit Mohr, Jens Peters, Manuel Baumann and Marcel Weil

Direct and indirect vulnerability of economic sectors to water scarcity: A hotspot analysis of the Indian economy pp. 1323-1337

Shelly Bogra and Bhavik R. Bakshi

Wastewater treatment system optimization with an industrial symbiosis model: A case study of a Chinese eco‐industrial park pp. 1338-1351

Wanqiu Hu, Jinping Tian, Xing Li and Lujun Chen

Transforming the coal and steel nexus for China's eco‐civilization: Interplay between rail and energy infrastructure pp. 1352-1363

Qian Zhang, Christopher Kennedy, Tao Wang, Wendong Wei, Jiashuo Li and Lei Shi

Material stock development of the transport sector in the city of Vienna pp. 1364-1378

Andreas Gassner, Jakob Lederer and Johann Fellner

Sustainability assessment of a novel micro solar thermal: Biomass heat and power plant in Morocco pp. 1379-1392

Israel Herrera, Irene Rodríguez‐Serrano, Daniel Garrain, Yolanda Lechón and Armando Oliveira

Volume 24, issue 5, 2020

Winners of the 2019 Graedel Prizes: The Journal of Industrial Ecology Best Paper Prizes pp. 940-942

Chris Kennedy and Reid Lifset

Suggested use? On evidence‐based decision‐making in industrial ecology and beyond pp. 943-950

Junming Zhu

City‐level water withdrawal in China: Accounting methodology and applications pp. 951-964

Zongyong Zhang, Junguo Liu, Bofeng Cai, Yuli Shan, Heran Zheng, Xian Li, Xukun Li and Dabo Guan

Making use of life cycle assessment and environmental product declarations: A survey with practitioners pp. 965-975

Bruno Menezes Galindro, Sebastian Welling, Niki Bey, Stig Irving Olsen, Sebastião Roberto Soares and Sven‐Olof Ryding

Efficient computation of environmentally extended input–output scenario and circular economy modeling pp. 976-985

Hale Çetinay, Franco Donati, Reinout Heijungs and Benjamin Sprecher

Methodological review and detailed guidance for the life cycle interpretation phase pp. 986-1003

Alexis Laurent, Bo P. Weidema, Jane Bare, Xun Liao, Danielle Maia de Souza, Massimo Pizzol, Serenella Sala, Hanna Schreiber, Nils Thonemann and Francesca Verones

Do we have enough natural sand for low‐carbon infrastructure? pp. 1004-1015

Dimitra Ioannidou, Guido Sonnemann and Sangwon Suh

Life cycle greenhouse gas emission and cost analysis of prefabricated concrete building façade elements pp. 1016-1030

Chunbo Zhang, Mingming Hu, Xining Yang, Arianna Amati and Arnold Tukker

Rethinking environmental LCA life stages for transport infrastructure to facilitate holistic assessment pp. 1031-1046

Shoshanna Saxe and Dena Kasraian

Energy and capital pp. 1047-1058

Christopher Kennedy

Bioeconomic transition?: Projecting consumption‐based biomass and fossil material flows to 2050 pp. 1059-1073

Raphael Asada, Tamás Krisztin, Fulvio di Fulvio, Florian Kraxner and Tobias Stern

Monitoring domestic material consumption at lower territorial levels: A novel data downscaling method pp. 1074-1087

Marco Bianchi, Carlos Tapia and Ikerne del Valle

Irrigation technology and water rebound in China's agricultural sector pp. 1088-1100

Lin Fang, Fengping Wu, Yantuan Yu and Lin Zhang

Eco‐efficiency of water and wastewater management in food production: A case study from a large dairy in Denmark pp. 1101-1112

Julie Skrydstrup, Sille Lyster Larsen and Martin Rygaard

Renewables‐based decarbonization and relocation of iron and steel making: A case study pp. 1113-1125

Dolf Gielen, Deger Saygin, Emanuele Taibi and Jean‐Pierre Birat

Economic aspirations connected to innovations in carbon capture and utilization value chains pp. 1126-1139

Henriette Naims

The relationship between environmental performance and environmental disclosure: A meta‐analysis pp. 1140-1157

My Hanh Doan and Remmer Sassen

Comparing energy and water use of aqueous and gas‐based metalworking fluids pp. 1158-1170

Sarang D. Supekar, Diane J. Graziano, Steven J. Skerlos and Joseph Cresko

Environmental impact assessment of plasma‐assisted and conventional ammonia synthesis routes pp. 1171-1185

Aikaterini Anastasopoulou, Robin Keijzer, Bhaskar Patil, Jürgen Lang, Gerard van Rooij and Volker Hessel

Volume 24, issue 4, 2020

LCAart: Communicating industrial ecology at a human scale pp. 736-747

Matthew J. Eckelman and Michelle M. Laboy

The potential for material circularity and independence in the U.S. steel sector pp. 748-762

Daniel R. Cooper, Nicole A. Ryan, Kyle Syndergaard and Yongxian Zhu

Restorative and regenerative: Exploring the concepts in the circular economy pp. 763-773

Piero Morseletto

Hybridization of complete PLCA and MRIO databases for a comprehensive product system coverage pp. 774-790

Maxime Agez, Richard Wood, Manuele Margni, Anders H. Strømman, Réjean Samson and Guillaume Majeau‐Bettez

The environmental impacts of operating an Antarctic research station pp. 791-803

Enda Crossin, Karli Verghese, Simon Lockrey, Hieu Ha and Gordon Young

Development of an environmental impact reduction strategy for Australia's Antarctic infrastructure pp. 804-814

Simon Lockrey, Karli Verghese, Enda Crossin and Gordon Young

A review of methods for characterizing the environmental consequences of actions in life cycle assessment pp. 815-829

Joseph Palazzo, Roland Geyer and Sangwon Suh

Energy use in the global food system pp. 830-840

Arkaitz Usubiaga‐Liaño, Paul Behrens and Vassilis Daioglou

Comparing urban food system characteristics and actions in US and Indian cities from a multi‐environmental impact perspective: Toward a streamlined approach pp. 841-854

Dana Boyer and Anu Ramaswami

Spatial perspectives enhance modeling of nanomaterial risks pp. 855-870

Elizabeth A. Moore, Callie W. Babbitt, Brian Tomaszewski and Anna Christina Tyler

Life cycle assessment comparison of wooden and plastic pallets in the grocery industry pp. 871-886

Sebastian K. Anil, Junfeng Ma, Gül E. Kremer, Charles David Ray and Shirin M. Shahidi

The energy embodied in the first and second industrial revolutions pp. 887-898

Christopher Kennedy

Impact of structural changes in wood‐using industries on net carbon emissions in Finland pp. 899-912

Elias Hurmekoski, Tanja Myllyviita, Jyri Seppälä, Tero Heinonen, Antti Kilpeläinen, Timo Pukkala, Tuomas Mattila, Lauri Hetemäki, Antti Asikainen and Heli Peltola

Life cycle assessment of side stream removal and recovery of nitrogen from wastewater treatment plants pp. 913-922

Rosalie van Zelm, Raquel de Paiva Seroa da Motta, Wan Yee Lam, Wilbert Menkveld and Eddie Broeders

CO2 emissions from the Chinese cement sector: Analysis from both the supply and demand sides pp. 923-934

Tao Du, Jian Wang, Heming Wang, Xin Tian, Qiang Yue and Hiroki Tanikawa

Volume 24, issue 3, 2020

ODYM—An open software framework for studying dynamic material systems: Principles, implementation, and data structures pp. 446-458

Stefan Pauliuk and Niko Heeren

A new physical accounting model for material flows in urban systems with application to the Stockholm Royal Seaport District pp. 459-472

Asterios Papageorgiou, Rajib Sinha, Björn Frostell and Cecilia Sundberg

Identifying Amsterdam's nutrient hotspots: A new method to map human excreta at building and neighborhood scale pp. 473-484

Rosanne Wielemaker, John Stuiver, Grietje Zeeman and Jan Weijma

Review of impact categories and environmental indicators for life cycle assessment of geotechnical systems pp. 485-499

Alena J. Raymond, James R. Tipton, Alissa Kendall and Jason T. DeJong

A life‐cycle assessment model for zero emission neighborhoods pp. 500-516

Carine Lausselet, Linda Ager‐Wick Ellingsen, Anders Hammer Strømman and Helge Brattebø

Lifting the veil on the correction of double counting incidents in hybrid life cycle assessment pp. 517-533

Maxime Agez, Guillaume Majeau‐Bettez, Manuele Margni, Anders H. Strømman and Réjean Samson

The life cycle carbon balance of selective logging in tropical forests of Costa Rica pp. 534-547

Federico E. Alice‐Guier, Frits Mohren and Pieter A. Zuidema

Supply versus use designs of environmental extensions in input–output analysis: Conceptual and empirical implications for the case of energy pp. 548-563

Hanspeter Wieland, Stefan Giljum, Nina Eisenmenger, Dominik Wiedenhofer, Martin Bruckner, Anke Schaffartzik and Anne Owen

A cost–benefit analysis of the environmental taxation policy in China: A frontier analysis‐based environmentally extended input–output optimization method pp. 564-576

Ke Wang, Jiayu Wang, Klaus Hubacek, Zhifu Mi and Yi-Ming Wei

Key sectors in greenhouse gas emissions in Spain: An alternative input–output analysis pp. 577-588

Vicent Alcantara and Emilio Padilla Rosa

Capital in the American carbon, energy, and material footprint pp. 589-600

Peter Berrill, T. Reed Miller, Yasushi Kondo and Edgar G. Hertwich

Meat, dairy, and more: Analysis of material, energy, and greenhouse gas flows of the meat and dairy supply chains in the EU28 for 2016 pp. 601-614

Stephen Ivan aan den Toorn, Ernst Worrell and Machteld A. van den Broek

Circular economy innovations, growth and employment at the firm level: Empirical evidence from Germany pp. 615-625

Jens Horbach and Christian Rammer

Evaluating the environmental performance of producing soil and surfaces through industrial symbiosis pp. 626-638

Michael Martin

Machine learning based modeling of households: A regionalized bottom‐up approach to investigate consumption‐induced environmental impacts pp. 639-652

Andreas Froemelt, René Buffat and Stefanie Hellweg

Greenhouse gas emissions of the production chain behind consumption of products in Austria: Development and application of a product‐ and technology‐specific approach pp. 653-664

Bernhard Windsperger, Andreas Windsperger, David Neil Bird, Hannes Schwaiger, Gerfried Jungmeier, Carsten Nathani and Rolf Frischknecht

Impacts of biogas production on nitrogen flows on Dutch dairy system: Multiple level assessment of nitrogen indicators within the biogas production chain pp. 665-680

Dieu Linh Hoang, Chris Davis, Henri C. Moll and Sanderine Nonhebel

Environmental sustainability of orthopedic devices produced with powder bed fusion pp. 681-694

Grazia Maria Cappucci, Martina Pini, Paolo Neri, Marta Marassi, Elena Bassoli and Anna Maria Ferrari

Eco‐efficiency assessment of calcium sulfoaluminate clinker production pp. 695-706

José‐Luis Gálvez‐Martos, Antonio Valente, Mathías Martínez‐Fernández and Javier Dufour

Regional material flow behaviors of agro‐food processing craft villages in Red River Delta, Vietnam pp. 707-725

Nguyet Thi Tran and Dirk Weichgrebe

Book Review of Life Cycle Assessment: Theory and Practice, edited by Michael Z. Hauschild, Ralph K. Rosenbaum, and Stig Irving Olsen; Environmental Life Cycle Assessment, by Olivier Jolliet, Myriam Saadé‐Sbeih, Shanna Shaked, Alexandre Jolliet, and Pierre Crettaz; and Life Cycle Assessment: Quantitative Approaches for Decisions That Matter, by H. Scott Matthews, Chris T. Hendrickson, and Deanna H. Matthews pp. 726-730

Bo Weidema and Miguel Brandão

Volume 24, issue 2, 2020

Winners of the 2018 Graedel Prizes: The Journal of Industrial Ecology best paper prizes pp. 268-270

Christopher Kennedy and Reid Lifset

Industrial ecology in support of climate change adaptation pp. 271-275

Mikhail V. Chester

A text mining analysis of the climate change literature in industrial ecology pp. 276-284

Fazle Rabbi Dayeen, Abhinav S. Sharma and Sybil Derrible

Industrial ecology, climate adaptation, and financial risk pp. 285-290

Timo Busch

Mineral resources in the age of climate adaptation and resilience pp. 291-299

Raimund Bleischwitz

From the urban metabolism to the urban immune system pp. 300-312

David N. Bristow and Eugene A. Mohareb

The role of industrial ecology in food and agriculture's adaptation to climate change pp. 313-317

Alissa Kendall and Edward S. Spang

Toward sustainable climate change adaptation pp. 318-330

Yi Yang, Beibei Liu, Peng Wang, Wei‐Qiang Chen and Timothy M. Smith

Toward a research agenda on climate‐related migration pp. 331-341

Clinton J. Andrews

Climate change impacts on asphalt road pavement construction and maintenance: An economic life cycle assessment of adaptation measures in the State of Virginia, United States pp. 342-355

Yaning Qiao, Joao Santos, Anne M.K. Stoner and Gerardo Flinstch

Incorporating the impacts of climate change into infrastructure life cycle assessments: A case study of pavement service life performance pp. 356-368

Geoffrey Guest, Jieying Zhang, Omran Maadani and Hamidreza Shirkhani

The weight of islands: Leveraging Grenada's material stocks to adapt to climate change pp. 369-382

Rob Symmes, Tomer Fishman, John N. Telesford, Simron J. Singh, Su‐Yin Tan and Kristen De Kroon

Overcoming climate change adaptation barriers: A study on food–energy–water impacts of the average American diet by demographic group pp. 383-399

Joe F. Bozeman, Rayne Bozeman and Thomas L. Theis

Breathing life into climate change adaptation pp. 400-409

Frank Stadler and Luke Houghton

Heat island effects in urban life cycle assessment: Novel insights to include the effects of the urban heat island and UHI‐mitigation measures in LCA for effective policy making pp. 410-423

Tiziana Susca and Francesco Pomponi

An integrated model of real estate market responses to coastal flooding pp. 424-435

Handi Chandra‐Putra and Clinton J. Andrews

Volume 24, issue 1, 2020

Bringing a life cycle perspective to emerging technology development pp. 6-10

Joule Bergerson, Stefano Cucurachi and Thomas P. Seager

Life cycle assessment of emerging technologies: Evaluation techniques at different stages of market and technical maturity pp. 11-25

Joule A. Bergerson, Adam Brandt, Joe Cresko, Michael Carbajales‐Dale, Heather L. MacLean, H. Scott Matthews, Sean McCoy, Marcelle McManus, Shelie A. Miller, William R. Morrow, I. Daniel Posen, Thomas Seager, Timothy Skone and Sylvia Sleep

LiSET: A Framework for Early‐Stage Life Cycle Screening of Emerging Technologies pp. 26-37

Christine Roxanne Hung, Linda Ager‐Wick Ellingsen and Guillaume Majeau‐Bettez

Prospective Environmental Analyses of Emerging Technology: A Critique, a Proposed Methodology, and a Case Study on Incremental Sheet Forming pp. 38-51

Daniel R. Cooper and Timothy G. Gutowski

Life cycle assessment of emerging technologies: A review pp. 52-63

Sheikh Moniruzzaman Moni, Roksana Mahmud, Karen High and Michael Carbajales‐Dale

When the Background Matters: Using Scenarios from Integrated Assessment Models in Prospective Life Cycle Assessment pp. 64-79

Angelica Mendoza Beltran, Brian Cox, Chris Mutel, Detlef P. van Vuuren, David Font Vivanco, Sebastiaan Deetman, Oreane Y. Edelenbosch, Jeroen Guinée and Arnold Tukker

Understanding the future of lithium: Part 1, resource model pp. 80-89

Hanjiro Ambrose and Alissa Kendall

Understanding the future of lithium: Part 2, temporally and spatially resolved life‐cycle assessment modeling pp. 90-100

Hanjiro Ambrose and Alissa Kendall

Life cycle assessment of emerging environmental technologies in the early stage of development: A case study on nanostructured materials pp. 101-115

Irene Bartolozzi, Tiberio Daddi, Carlo Punta, Andrea Fiorati and Fabio Iraldo

Life cycle assessment of 3D printing geo‐polymer concrete: An ex‐ante study pp. 116-127

Yue Yao, Mingming Hu, Francesco Di Maio and Stefano Cucurachi

Economic assessment and carbon footprint of recycling rare earths from magnets: Evaluation at lab scale paving the way toward industrialization pp. 128-137

Antoine Beylot, Nour‐Eddine Ménad, Alain Seron, Michel Delain, Alice Bizouard, Yannick Ménard and Jacques Villeneuve

Life cycle assessment to quantify the impact of technology improvements in bike‐sharing systems pp. 138-148

Ricardo Javier Bonilla‐Alicea, Bryan C. Watson, Ziheng Shen, Laura Tamayo and Cassandra Telenko

Life cycle sustainability assessment of autonomous heavy‐duty trucks pp. 149-164

Burak Sen, Murat Kucukvar, Nuri C. Onat and Omer Tatari

Technoecological analysis of energy carriers for long‐haul transportation pp. 165-177

Sebastian Wolff, Michael Fries and Markus Lienkamp

Using anticipatory life cycle assessment to enable future sustainable construction pp. 178-192

Verena Göswein, Carla Rodrigues, José D. Silvestre, Fausto Freire, Guillaume Habert and Jakob König

Life cycle assessment of emerging technologies at the lab scale: The case of nanowire‐based solar cells pp. 193-204

Georgios Pallas, Martina G. Vijver, Willie J. G. M. Peijnenburg and Jeroen Guinée

Environmental impacts and limitations of third‐generation biobutanol: Life cycle assessment of n‐butanol produced by genetically engineered cyanobacteria pp. 205-216

Astrid Nilsson, Kiyan Shabestary, Miguel Brandão and Elton P. Hudson

A region‐specific environmental analysis of technology implementation of hydrogen energy in Japan based on life cycle assessment pp. 217-233

Teruyuki Shimizu, Kei Hasegawa, Manabu Ihara and Yasunori Kikuchi

Environmental and economic impacts of solar‐powered integrated greenhouses pp. 234-247

Joseph A. Hollingsworth, Eshwar Ravishankar, Brendan O'Connor, Jeremiah X. Johnson and Joseph F. DeCarolis

Site‐specific life cycle assessment of a pilot floating offshore wind farm based on suppliers’ data and geo‐located wind data pp. 248-262

Baptiste Poujol, Anne Prieur‐Vernat, Jean Dubranna, Romain Besseau, Isabelle Blanc and Paula Pérez‐López