International Journal of Energy Technology and Policy

2002 - 2025

From Inderscience Enterprises Ltd
Bibliographic data for series maintained by Sarah Parker ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 7, issue 5/6, 2011

Performance evaluation of locality-based compact solar refrigeration system pp. 407-416

M. Achuthan and Rangasamygounder Rathnasamy

Automation of energy management system in Rourkela steel plant: a case study pp. 417-432

Rajat Kumar Panigrahy, Ashok Kumar Panda and Srikanta Patnaik

Performance and energy analyses of a diesel engine fuelled with Koroch seed oil methyl ester and its diesel fuel blends pp. 433-454

Tapan Kumar Gogoi and Debendra Chandra Baruah

Effects of injection timing on the performance and emissions of a diesel engine fuelled with diethyl ether blended thevetia peruviana biodiesel pp. 455-468

T.K. Kannan and R. Marappan

Exergy analysis of gas turbine - solid oxide fuel cell-based combined cycle power plant pp. 469-488

M. Sreeramulu, A.V.S.S.K.S. Gupta and T. Srinivas

Selection and economical evaluation of solar desalination technologies via DesalSolar software pp. 489-502

Seyed Mojtaba Ladjevardi

The performance and emission characteristics of a diesel engine using preheated Kusum oil and Kusum diesel blend pp. 503-518

Saroj Kumar Acharya, Ranjan Kumar Swain, Mahendra Kumar Mohanty, Asit Kumar Mishra and Susila Mahapatra

Technological innovations and energy intensity of machine tool SMEs in Bangalore: do process innovations contribute to energy efficiency? pp. 519-536

M.H. Bala Subrahmanya and R. Sudhir Kumar

Volume 7, issue 4, 2011

A modular approach for classification and location of arcing and non-arcing faults on transmission lines pp. 309-324

M. Jayabharata Reddy and Dusmanta Kumar Mohanta

Operation and control of multiple Distributed Generation systems in the microgrid pp. 325-341

D.N. Gaonkar and G.N. Pillai

Evolution of legal framework and regulatory challenges in the context of Indian power sector reform pp. 342-357

Niranjan Kumar, Devadutta Das and N.P. Padhy

Magnetising inrush current in transformers: an overview pp. 358-378

N.S. Beniwal, D.K. Dwivedi and H.O. Gupta

A Hybrid Particle Swarm Optimisation approach for Reactive Power Optimisation in electricity market pp. 379-392

P. Rajkumar and D. Devaraj

The impact of water flow configuration on crystallisation in LiBr/H 2 O absorption water heater pp. 393-404

Kai Wang, Omar Abdelaziz and Edward A. Vineyard

Volume 7, issue 3, 2010

Energy consumption modelling and benchmarking in continuous galvanising lines pp. 229-253

Bhaskaran Gopalakrishnan, Raviraj Ratnakar Chavan, Deepak Gupta and Nasr E. Alkadi

Optimum price of electricity in thermal-generating station under deregulation pp. 254-274

P. Reji, S. Ashok and K.M. Moideenkutty

Voltage source converter with a transformer as an electronic load controller for a stand-alone power generation pp. 275-287

Gaurav Kumar Kasal and Bhim Singh

Power Factor correction capacitors for utilising power consumption in industrial plants pp. 288-308

Osama M. Aloquili and Nazih M. Abu-Shikhah

Volume 7, issue 2, 2009

Energy and touch-information for body-worn ubiquitous computing pp. 137-166

Adrian David Cheok, Roshan Lalintha Peiris, Charith Lasantha Fernando, Owen Noel Newton Fernando and Khoo Eng Tat

Electricity demand and supply projections for Indian economy pp. 167-179

Subhash Mallah and N.K. Bansal

Optimal placement of multi-type FACTS devices to enhance Total Transfer Capability using Improved Evolutionary Programming pp. 180-200

Weerakorn Ongsakul and Peerapol Jirapong

Experimental investigations and comparison of energy and exergy efficiencies of the box type and Solar Parabolic Cooker pp. 201-212

Nitesh Rathore and S.K. Shukla

Performance evaluation of a hydrogen-ethanol fuelled engine pp. 213-228

Syed Yousufuddin, Syed Nawazish Mehdi and Mohammad Masood

Volume 7, issue 1, 2009

Thermal impact of sinking residential buildings in hot regions – Kuwait as a case study pp. 3-17

Abdullatif E. Ben-Nakhi and Rafik M. El Shiaty

Smart operation of air-conditioning (A/C) and lighting systems for national load management pp. 18-29

G.P. Maheshwari, F. Al-Ragom, D. Al-Nakib, H. Al-Taqi and A. Meerza

Energy-efficient operation of two-pipe fan-coil unit system with independent fresh air supply pp. 30-45

J.W. Wan and W.M. Zhang

The effect of reinforced concrete frames on the thermal performance of residential villas in hot climates pp. 46-62

Essam Omar Assem and Fotouh Al-Ragom

Energy efficiency management in India: a supply side perspective pp. 63-77

Neena Sinha and N.V. Kumar

Market operations in future Indian restructured power system scenario pp. 78-94

P. Kanakasabapathy and K. Shanti Swarup

Energy management program for the State of Kuwait pp. 95-112

G.P. Maheshwari, A. Al-Mulla and Y. Al-Hadban

Optimal scheduling and operation of hybrid biomass/wind/PV energy system for rural areas pp. 113-126

P. Balamurugan, S. Ashok and T.L. Jose

Omani Bedouins' readiness to accept solar thermoelectric refrigeration systems pp. 127-136

Sabah A. Abdul-Wahab, Ali Elkamel, Ali M. Al-Damkhi, Is'haq A. Al-Habsi, Hilal S. Al-Rubai'ey, Abdulaziz K. Al-Battashi, Ali R. Al-Tamimi, Khamis H. Al-Mamari and Muhammad U. Chutani

Volume 6, issue 5/6, 2008

Effect of outdoor air parameters on energy consumption with heat-pipe used in air-handling unit pp. 446-457

J.W. Wan, Kunli Yang and J.L. Zhang

Methodology for calculating the energy consumption of air-conditioner in residential Building of China pp. 458-473

Jinghua Yu, Changzhi Yang, Liwei Tian and Dan Liao

Energy and exergy utilisation in the Greek building sector pp. 474-494

G. Xydis, C.J. Koroneos and A. Moropoulou

Measures to weaken the influence of solar radiation on peak cooling load in office buildings pp. 495-501

Zhun Li and Changzhi Yang

A mathematical modelling of the intensity of contaminants (CO 2 ) on occupancy level of a space in continuous use pp. 502-514

S.A. Oke, O. Damisa, O.I. Oyedokun, O.G. Akanbi and A.D. Adeyeye

The impact of human motion on TVOCs distribution for three ventilation modes pp. 515-533

Hao Yuan, Quan Zhang, Guoqiang Zhang, Ke Wang and D.J. Moschandreas

Impact of surface roughness on particle penetration through building envelope leakage pp. 534-542

Liwei Tian, Guoqiang Zhang, Jinghua Yu, Quan Zhang and Jin Zhou

Evaluation of convective heat and mass transfer in Open Sun and Green House Drying pp. 543-553

S.K. Shukla, D.C. Sarswat and T. Raj

Mathematical modelling of lead assimilation by printing press operators in a poor indoor air quality environment pp. 554-565

S.A. Oke, A.O. Ahmed, O.G. Akanbi, F.A. Oyawale and C.E. Ofiabulu

Influence of absorber mass transfer effectiveness on performance of R 134a-DMAC based single, double and half-effect absorption cooling systems pp. 566-580

S. Tharves Mohideen, R. Saravanan and S. Renganarayanan

Numerical investigation on gas flow and pressure drop for 90° rectangular ventilation bends in low Reynolds number pp. 581-589

Bingtao Zhao, Zhongxiao Zhang and Jing Jin

Experimental study of a novel thermoelectric domestic-ventilator with heat recovery pp. 590-607

Tao Li, Guangfa Tang and Guangcai Gong

Optimal Power Flow under Variable Wind Generation pp. 608-620

S. Durairaj and B. Fox

Volume 6, issue 4, 2008

Representing technology in CGE models: a comparison of SGM and AMIGA for electricity sector CO 2 mitigation pp. 323-342

Michael G. Shelby, Allen A. Fawcett, O. Eric Smith, Donald A. Hanson and Ronald Sands

Diffusion of innovative heating systems in detached homes in Sweden pp. 343-367

Krushna Mahapatra and Leif Gustavsson

Innovating the innovators: the case for transformational energy Research and Development pp. 368-380

Benjamin K. Sovacool

Foresight of innovative energy technologies through a multi criteria approach pp. 381-394

Haris Doukas, Konstantinos D. Patlitzianas, Alexandra G. Papadopoulou and John Psarras

The strategic activities of electricity network operators within changing electricity distribution industry pp. 395-412

Anna Bradd, Jukka-Pekka Bergman, Ari Jantunen, Juha-Matti Saksa, Satu Viljainen and Jarmo Partanen

A methodology for developing Distributed Generation scenarios in urban areas using geographical information systems pp. 413-434

Marc Medrano, Jack Brouwer, Marc Carreras-Sospedra, Marco A. Rodriguez, Donald Dabdub and G. Scott Samuelsen

Building integration of 30 kWp photovoltaic system at University Politehnica of Bucharest, Romania pp. 435-443

Aurelian Craciunescu, Mihai Predescu, Matthias Grottke, Mihai Octavian Popescu, Claudia Laurenta Popescu and Gloria Stefania Ciumbulea

Volume 6, issue 3, 2008

Wind power in electricity markets: key issues and challenges pp. 196-211

B.S. Rajpurohit, S.N. Singh and Istvan Erlich

Impacts of wind power on PJM market development pp. 212-223

Zhenyu Fan and Hui Ni

Dispachability improvement of wind generation by the Virtual Power Producers pp. 224-239

H. Morais, M. Cardoso, N. Saleiro, Z.A. Vale, L. Castanheira and I. Praca

Bidding and regulating strategies in a dual imbalance pricing system: case study for a Dutch wind producer pp. 240-253

M. Gibescu, W.L. Kling and E.W Van Zwet

Wind power generation in China: present status and future prospects pp. 254-276

Fushuan Wen, Dong Hua, Qin Wang and S.n Singh

Development of linear models of Static Var Compensators suitable for enhancing performance of power systems including wind farms pp. 277-297

J.Ch. Dermentzoglou and D.P. Papadopoulos

Evaluation of wind power integration practices in Germany pp. 298-310

W. Schulz, E. Handschin and C. Rehtanz

Integration of pump storage hydro with wind energy pp. 311-321

Chin-Chuen Teoh and Gerald B. Sheble

Volume 6, issue 1/2, 2008

NO x re-burn simulation in a double-jet counter-flow flame pp. 5-16

Dragos Isvoranu

Vortex structure and heat transfer in a diffusion combustion field with circulating flow pp. 17-30

Hideo Kawahara and Tatsuo Nishimura

Reynolds Averaged Navier-Stokes-based numerical simulation of external heat convection and losses for transitional subsonic flows through a 2D turbine passage pp. 31-46

Dorin Stanciu and Mircea Marinescu

Numerical simulation of a large power steam turbine run-up pp. 47-63

Gabriel P. Negreanu

The computation of the entropy generation rate for turbomachinery design applications: some theoretical remarks and practical examples pp. 64-95

Carmine Luca Iandoli, Enrico Sciubba and Nicola Zeoli

Computational study of a diagonal channel Magnetohydrodynamic power generation pp. 96-111

Triwahju Hardianto, Nobuomi Sakamoto and Nobuhiro Harada

A Finite Element Method analysis and optimisation of a polymer electrolyte membrane fuel cell with interdigitated flow field design pp. 112-123

A.M. Morega, J.C. Ordonez, S. Kosaraju and J.V.C. Vargas

Technology of Computational Fluid Dynamics in space engines and solar-gravity draught power plants pp. 124-142

Radu Dan Rugescu

Numerical simulation of fluid flow and heat transfer in a phase change thermal energy storage pp. 143-158

T. Kousksou, J-P. Bedecarrats, F. Strub and J. Castaing-Lasvignottes

Application of Computational Fluid Dynamics to flow next to high-rise buildings in Hong Kong due to air-conditioner heat rejection pp. 159-177

M. Bojic, S. Savic and D. Nikolic

Thermal energy flow modelling in a typical university classroom pp. 178-189

Kaveh Sookhak Lari