International Journal of Manufacturing, Materials, and Mechanical Engineering (IJMMME)

2011 - 2025

Current editor(s): J. Paulo Davim

From IGI Global
Bibliographic data for series maintained by Journal Editor ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 5, issue 4, 2015

Flexural Strength Improvement of Welded Joints Prepared by Vibratory Welding Process pp. 1-16

P. Govinda Rao, P. Srinivasa Rao and A. Gopala Krishna

Optimization of Drilling Process on Al-SiC Composite using Grey Relation Analysis pp. 17-31

K. Vinoth Babu, M. Uthayakumar, J. T. Winowlin Jappes and T. P. D. Rajan

Finite Element Analysis of Automotive Disk Brake and Pad in Frictional Model Contact pp. 32-62

Belhocine Ali

Tensile Fracture in Laser Welding Joints of Al-Cu-Li-Mg-X Alloy Bearing Gaseous Porosity pp. 63-79

Naveed Akhtar and SuJun Wu

Volume 5, issue 3, 2015

Optimization Analysis on the Crashworthiness of Light Aircrafts pp. 1-23

Pu-Woei Chen and Yung-Yun Chen

A New Hybrid Simulated Annealing Algorithm for Large Scale Global Optimization pp. 24-36

Seifedine N. Kadry and Abdelkhalak El Hami

Laminated Composite Stiffened Cylindrical Shell Panels with Cutouts under Free Vibration pp. 37-63

Sarmila Sahoo

Study on Slurry Paste Boronizing of 410 Martensitic Stainless Steel Using Taguchi Based Desirability Analysis (TDA) pp. 64-77

S.C. Atul, R. Adalarasan and M. Santhanakumar

Volume 5, issue 2, 2015

Analytical and Experimental Study of Electrochemical Micromilling pp. 1-16

Abishek B. Kamaraj and Murali M. Sundaram

Technological Innovations in Machining of Inconel 718: A State of the Art pp. 17-43

Vivek Aggarwal, Rajiv K. Garg and Sehijpal Singh Khangura

Assessment of Direct Laser Writing using Nd YAG Lasers for Microfluidic Applications pp. 44-58

Muneer Khan Mohammed, Abdulrahman Al-Ahmari and Usama Umer

Volume 5, issue 1, 2015

Experimental Study of the Effect of Post Processing Techniques on Mechanical Properties of Fused Deposition Modelled Parts pp. 1-20

Addanki Sambasiva Rao, Medha A. Dharap and J. V. L. Venkatesh

Analysis of Hardness by Parametric Optimization of Gravity Die Casting for A-356 Aluminium Alloy Using Taguchi Technique pp. 21-34

Shyam Kumar Karna, Ran Vijay Singh and Rajeshwar Sahai

Application of Grey Taguchi based Response Surface Methodology (GT-RSM) in Injection Moulding of Polypropylene/E-glass Composite pp. 35-48

M. Santhanakumar and R. Adalarasan

Characterization of Cutting Parameters in the Minimum Quantity Lubricant (MQL) Machining Process of a Gearbox pp. 49-60

J. A. Travieso-Rodriguez, G. Gomez-Gras, Silvia Garcia-Vilana, Ferran Mainau-Noguer and R. Jerez-Mesa

Volume 4, issue 4, 2014

Optimization Studies on Electroless Nickel Coatings: A Review pp. 1-25

Sanjib Kundu, Prasanta Sahoo and Suman Kalyan Das

FEA Based Study of Loose Transmission Gearbox Housing pp. 26-37

Ashwani Kumar, Himanshu Jaiswal and Pravin P. Patil

Multiresponse Analysis in Abrasive Waterjet Machining Process on AA 6351 pp. 38-48

Naresh Babu Munuswamy and M. Nambi Krishnan

Application of the Entropy Weight and TOPSIS Method on Al–12% SiC Metal Matrix Composite during EDM pp. 49-63

Bharat Chandra Routara, Rajesh Kumar Bhuyan and Arun Kumar Parida

Volume 4, issue 3, 2014

Comparative Performance In Hard Turning Of AISI 1015 Steel With Carbide Insert Using Orthogonal Array Design And Grey Relational Analysis Under Spray Impingement Cooling And Dry Environment: A Case Study pp. 1-32

Purna Chandra Mishra, Dipti Kanta Das and Susant Kumar Sahu

Effect of Tempering Temperature on Microstructure, Texture and Mechanical Properties of a High Strength Steel pp. 33-49

Pradipta Kumar Jena, K. Siva Kumar and A.K. Singh

Design of Fault Detection System for Automobile Power Train Using Digital Signal Processing and Soft Computing Techniques pp. 50-63

Karthik V. Shankar, Kailasnath K and S. Babu Devasenapati

Volume 4, issue 2, 2014

Hybrid Line Search and Simulated Annealing For Production Planning System in Industrial Engineering pp. 1-13

P. Vasant

Investigation on Residual Stress and Flank Wear of Tool Insert in Hard Turning of Chrome Plated EN24 Substrate pp. 14-28

K.N. Mohandas, C.S. Ramesh, Eshwara Prasad Koorapati and N. Balashanmugam

Multi-Objective Optimization of EDM Process Parameters using Taguchi Method, Principal Component Analysis and Grey Relational Analysis pp. 29-46

U. Shrinivas Balraj and A. Gopala Krishna

CMAC Based Hybrid Control System for Solving Electrohydraulic System Nonlinearities pp. 47-72

Amro Shafik, Magdy Abdelhameed and Ahmed Kassem

Volume 4, issue 1, 2014

Neural Network Based Modelling and GRA Coupled PCA Optimization of Hole Sinking Electro Discharge Micromachining pp. 1-21

Rajesh Kumar Porwal, Vinod Yadava and J. Ramkumar

Experimentation and Analysis into Micro-Hole Machining of Ti-6Al-4V by Micro-EDM Using Boron Carbide Powder Mixed De-Ionized Water pp. 22-41

G. Kibria, I. Shivakoti and B. Bhattacharyya

Drilling Of Tio2 and Zns Filled Gfrp Composites: A Taguchi Approach pp. 42-54

Arun K. V., Sujay Kumar D. and Murugesh M. C.

Unsteady Numerical and Experimental Study of Cavitation in Axial Pump pp. 55-68

Mohamed Adel and Nabil H. Mostafa

Coupled Field Thermoelectric Simulation of High Voltage Ceramic Cap and Pin Disc Type Insulator Assembly pp. 69-86

R. D. Palhade, V. B. Tungikar, G. M. Dhole and S. M. Kherde

Volume 3, issue 4, 2013

Modeling and Experimental Verification of Nano Positioning System for Nanomanufacturing pp. 1-13

Sagil James, Lauren Blake and Murali M. Sundaram

Microlubrication Effects During End Milling AISI 1018 Steel pp. 14-29

Vasim Shaikh, Nourredine Boubekri and Thomas W. Scharf

Effect of TiO2 and ZnS Fillers on the Bending Characteristics of GFRP Composites under Varied Flaw Configurations pp. 30-43

M. C. Murugesh, D. Sujay Kumar and K. V. Arun

Finite Element Analysis of Elliptical Chord: Tubular T-Joints pp. 44-61

K. S. Narayana, R. T. Naik, R. C. Mouli, L. V. V. Gopala Rao and R. T. Babu Naik

A Molecular Dynamics Simulation Study of the Mechanical Properties of Carbon-Nanotube Reinforced Nylon 6 Composite pp. 62-73

Nabila Tahreen and A.K.M. Masud

Volume 3, issue 3, 2013

Towards a New Framework for Sustainable Supply Chain Management pp. 1-12

Santanu Mandal

Prediction of Weld Bead Geometry in Chromium-Manganese Stainless Steel Gas Tungsten Arc Welded Plates Using Artificial Neural Networks pp. 13-41

R. Sudhakaran and P. S. Siva Sakthivel

Multi-Response Optimization of Electrochemical Machining of Al-Si/B4C Composites Using RSM pp. 42-56

Sadineni Rama Rao and G. Padmanabhan

Damage Identification of Multimember Structure using Improved Neural Networks pp. 57-75

M. Rajendra and K. Shankar

A Novel Approach to Active Noise Control using Normalized Clipped Adaptive Algorithm pp. 76-88

A. Chandra Mouli and Ch. Ratnam

Volume 3, issue 2, 2013

Intelligent Modelling and Multi-Objective Optimisation of Laser Beam Cutting of Nickel Based Superalloy Sheet pp. 1-16

Amit Sharma, Vinod Yadava and K. B. Judal

Effects of Different Parameters on Delamination Factor of Glass Fiber Reinforced Plastic (GFRP) pp. 17-31

Vikas Sharma, Vinod Kumar and Harmesh Kumar

Site Occupancy of the B2 Phase in Ti-25Al-zMo Alloys pp. 32-44

A. K. Singh and M. Premkumar

Three-Dimensional Study of Fatigue Crack Growth in a Rotating Disc pp. 45-62

Eskandari Hadi and Nami Mohammad Rahim

A New Calculation Method for Belleville Disc Springs with Contact Flats and Reduced Thickness pp. 63-73

Giammarco Ferrari

Volume 3, issue 1, 2013

An Experimental Investigation of the Influence of Cutting-Edge Geometry on the Machinability of Compacted Graphite Iron pp. 1-25

Varun Nayyar, Md. Zubayer Alam, Jacek Kaminski, Anders Kinnander and Lars Nyborg

Optimization of Cutting Parameters using Cryogenically Treated High Speed Steel Tool by Taguchi Application pp. 26-38

Lakhwinder Pal Singh and Jagtar Singh

A Molecular Dynamics Simulation Study of the Mechanical Properties of Carbon-Nanotube Reinforced Polystyrene Composite pp. 39-51

Nabila Tahreen and K. M. Masud

Application of Response Surface Methodology to Predict Ovality of AA6082 Flow Formed Tubes pp. 52-65

M. Srinivasulu, M. Komaraiah and C.S. Krishna Prasada Rao

Simulation of Structural, Thermal and Electrical Load for High Voltage Ceramic Cap and Pin Disc Insulator Assembly pp. 66-79

R. D. Palhade, V. B. Tungikar, G. M. Dhole and S. M. Kherde