International Journal of Manufacturing, Materials, and Mechanical Engineering (IJMMME)

2011 - 2025

Current editor(s): J. Paulo Davim

From IGI Global
Bibliographic data for series maintained by Journal Editor ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Simulation and Reliability Analysis of Laser-Welded Blanks after Metal Surface Finishing Process pp. 1-11: Tanmay Pandit and Ahad Ali
Multivariate Optimization of the Cutting Parameters when Turning Slender Components pp. 12-31: A.R. Silva Filho, A.M. Abrão, A.P. Paiva and J.R. Ferreira
Experimental Investigation of Machining Characteristics for the WEDM of Al/ZrO2(p)–PRMMC pp. 32-46: Sanjeev Kumar Garg, Alakesh Manna and Ajai Jain
Rubber-Toughened Long Glass Fiber Reinforced Thermoplastic Composite pp. 47-58: Fabrizio Quadrini, Claudia Prosperi and Loredana Santo
Antimycotic Activity of Nanoparticles of MgO, FeO and ZnO on some Pathogenic Fungi pp. 59-70: A. H. Wani, M. Amin, M. Shahnaz and M. A. Shah
Hybrid Modeling and Optimization of Manufacturing: Combining Artificial Intelligence and Finite Element Method pp. 71-72: Uday S. Dixit

Laser Bending of 5005 Aluminum Alloy Sheets pp. 1-15: D. Bellisario and F. Quadrini
Investigation of Temperature Distribution in the Workpiece During High Speed Deep Surface Grinding using FEM pp. 16-33: Audhesh Narayan and Vinod Yadava
Modeling of Tool Wear in Turning EN 31 Alloy Steel using Coated Carbide Inserts pp. 34-51: Davinder Sethi and Vinod Kumar
The Offset Model of a Hexapod Robot and the Effect of the Offset Parameter pp. 52-59: Kazi Mostafa, Innchyn Her and Yi-Hsien Wu
Numerical Simulation of Dual-Mode Scramjet Combustor with Significant Upstream Interaction pp. 60-74: Rahul Ingle and Debasis Chakraborty

An Educational Scheme for a CNC Drilling Machine pp. 1-11: Salah Haridy, Zhang Wu and Amro Shafik
Response Surface Modeling and Grey Relational Analysis to Optimize Turning Parameters with Multiple Performance Characteristics pp. 12-45: L. B. Abhang and M. Hameedullah
An Experimental Investigation during Micro Machining of E-Glass-Fibre-Epoxy Composite on Developed Electrochemical Spark Machining Setup pp. 46-60: Alakesh Manna and Vivek Narang
Synthesis and Characterization of Hexagonal Shaped Nanocrystalline Zinc Oxide Powders pp. 61-76: M. Ahmad, E. Ahmed, N. R. Khalid, M. J. Jackson and W. Ahmed
Strain Energy Release Rate in Treated Circumferentially Cracked Spring Steel pp. 77-87: Arun K. V. and Swetha K. V.

New Technological Solutions for Recycling Spent Tire Rubber pp. 1-10: Carmine Lucignano and Fabrizio Quadrini
Determination of Optimum Parameters for Multi-Performance Characteristic in Turning of Al 6061-6% ZrB2 in-situ Metal Matrix Composite Using Grey Relational Analysis pp. 11-29: A. Mahamani, N. Muthukrishnan and V. Anandakrishnan
Modeling of Cement-Bonded Sand Mould System: An Artificial Intelligence Approach pp. 30-46: B. Surekha, Pandu R. Vundavilli and M. B. Parappagoudar
Hybrid Tabu Search Hopfield Recurrent ANN Fuzzy Technique to the Production Planning Problems: A Case Study of Crude Oil in Refinery Industry pp. 47-65: Pandian M. Vasant, Timothy Ganesan and Irraivan Elamvazuthi
Shape Memory Alloy Based Actively Tuned Undamped Mass Absorber pp. 66-74: M. Senthil Kumar, V. Raj Kumar and S. Shyamkirthi

3D Finite Element Modeling of High Speed Machining pp. 1-18: A.P. Markopoulos, K. Kantzavelos, N.I. Galanis and D.E. Manolakos
A Finite Element Study of Chip Formation Process in Orthogonal Machining pp. 19-45: Amrita Priyadarshini, Surjya K. Pal and Arun K. Samantaray
Reciprocating Wear Behaviour of Two Dimensionally Reinforced Carbon-Phenolic and Carbon-Epoxy Composites pp. 46-57: Sourav Sarkar, V.G. Sekaran, E. Badisch, Manish Roy and R. Mitra
Preparation of Copper Oxide (CuO) Nanoparticles and their Bactericidal Activity pp. 58-64: F. M. Al-Marzouki, O. A. Al-Hartomy and M. A. Shah
Design and Evaluation of Hydro-Pneumatic Friction Damper Suspension System pp. 65-74: S.V. Gorabal, S.N. Kurbet and K.K. Appukuttan

Laser Sub-Micron Patterning of Rough Surfaces by Micro-Particle Lens Arrays pp. 1-9: Ashfaq Khan, Zengbo Wang, Mohammad A. Sheikh and Lin Li
Recycling of Waste Epoxy-Polyester Powders for Foam Production pp. 10-20: Carmine Lucignano, Erica Anna Squeo, Alessandro Guglielmotti and Fabrizio Quadrini
The Impact of FEM Modeling Parameters on the Computed Thermo-Mechanical Behavior of SLA Copper Shelled Electrodes pp. 21-30: Vassilios Iakovakis, John Kechagias, George Petropoulos and Stergios Maropoulos
Attribute Based Selection of Thermoplastic Resin for Vacuum Infusion Process: A Decision Making Methodology pp. 31-52: R. T. Durai Prabhakaran, Aage Lystrup and Tom Løgstrup Andersen
Roughness Optimization of Electroless Ni-B Coatings Using Taguchi Method pp. 53-71: Suman Kalyan Das and Prasanta Sahoo

An Investigation into the Environmental Impact of Product Recovery Methods to Support Sustainable Manufacturing Within Small and Medium-Sized Enterprises (SMEs) pp. 1-18: Michaela R. Appleby, Chris G. Lambert, Allan E. W. Rennie and Adam B. Buckley
Feature Recognition and Datum Extraction for Setup Planning and Operation Sequencing for Prismatic Parts pp. 19-45: T. Srikanth Reddy and M. S. Shunmugam
Micro Machining of Nonconductive Al2O3 Ceramic on Developed TW-ECSM Setup pp. 46-55: Alakesh Manna and Amandeep Kundal
Al2O3 Nanobricks via an Organic Free Route Using Water as Solvent pp. 56-61: M. A. Shah
Large Amplitude Forced Vibration Analysis of Stiffened Plates Under Harmonic Excitation pp. 62-98: Anirban Mitra, Prasanta Sahoo and Kashinath Saha

A Finite Element Study of Buckling and Upsetting Mechanisms in Laser Forming of Plates and Tubes pp. 1-17: M. S. Che Jamil, M. A. Sheikh and L. Li
Cold End Forming Of Welded Steel Tubes pp. 18-30: L. M. Alves, J. G. Medeiros and P. A. F. Martins
Study on Oxidation of Stainless Steels During Hot Rolling pp. 31-42: Z. Y. Jiang, D. B. Wei, K. Tieu, J. X. Huang, A. W. Zhang, X. Shi and S. H. Jiao
Material Selection Using a Novel Multiple Attribute Decision Making Method pp. 43-56: R. V. Rao and B. K. Patel
Development of an Optimization Framework for Parameter Identification and Shape Optimization Problems in Engineering pp. 57-79: A. Andrade-Campos