International Journal of Manufacturing, Materials, and Mechanical Engineering (IJMMME)

2011 - 2025

Current editor(s): J. Paulo Davim

From IGI Global
Bibliographic data for series maintained by Journal Editor (journaleditor@igi-global.com).

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 9, issue 4, 2019

Experimental Investigation Into Sequential Micro Machining (SMM) for Micro Hole Drilling on SS–304 pp. 1-16

Raju Mahadeorao Tayade, Biswanath Doloi, Biplab Ranjan Sarkar and Bijoy Bhattacharyya

Exploring Magnetorheological Brake-Based Anti-Lock Brake System for Automotive Application: Exploring MRB-Based ABS for Automotive Application pp. 17-43

Romit Kamble and Satyajit Patil

Theoretical and Experimental Free Vibration Analysis of a Loaded Curved Beam With Moving Boundaries: Vibration Analysis of Beam With Moving Boundaries pp. 44-67

Sushanta Ghuku and Kashi Nath Saha

Volume 9, issue 3, 2019

A Geometric Model for Tolerance Analysis with Manufacturing Signature and Operating Conditions pp. 1-13

Wilma Polini and Andrea Corrado

Analysis on the Impact Behaviors of E and S-glass Composite Elbow Pipe Joints Exposed to Impact Loading Followed by Axial Compression: Analysis on Impact and Compression of Elbow Joints pp. 14-25

Sujith Bobba, Z Leman, Sapuan Sm and Zainudin Es

Monitoring of Machining in the Cloud as a Cost Management Service and Follow of Cutting Parameters: Environment Developed With IoT Tools pp. 26-41

Ferney-Alexis Giraldo-Castrillon, Gabriel-Jaime Páramo-Bermúdez and Juan-Manuel Muñoz-Betancur

Design and Feasibility Test of an Indigenous Motorized Wheel for Manual Wheelchair pp. 42-55

Sateesh Reddy Avutu, Sudip Paul and Dinesh Bhatia

Volume 9, issue 2, 2019

Design for Additive Manufacturing and Advanced Development Methods Applied to an Innovative Multifunctional Fan pp. 1-32

Leonardo Frizziero, Giampiero Donnici, Alfredo Liverani and Karim Dhaimini

Young's Modulus and Poisson's Ratio Estimation Based on PSO Constriction Factor Method Parameters Evaluation pp. 33-46

George Lucas Dias, Ricardo Rodrigues Magalhães, Danton Diego Ferreira and Bruno Henrique Groenner Barbosa

Parametric Study and Optimization of Pulsed Laser Thermal Micro-Forming of Thin Sheets pp. 47-61

Kuntal Maji

Optimal Design and Fabrication of Shoe Lasts for Ankle Foot Orthotics for Patients With Diabetes pp. 62-80

P.W. Anggoro, M. Tauviqirrahman, J. Jamari, A.P. Bayuseno, J. Wibowo and Y.D. Saputro

Volume 9, issue 1, 2019

Topology Optimization of Seat Cushion Frame With Dissimilar Materials for Lightweight Strength Optimization pp. 1-12

Yeong Jo Ju and Euy Sik Jeon

Investigation to Appraise the Abrasive Water Jet Response of Curaua/Basalt Hybrid Polyester Composites pp. 13-29

T. Premkumar, Siva Irulappasamy, S. Rajesh, J.T. Winowlin Jappes and Sandro Campos Amico

Studies on Numerical Simulation of Temperature Distribution in Laser Beam Welding of 304L Austenitic Stainless Steel pp. 30-49

Pramod Kumar and Amar Nath Sinha

Modifications Required for Palm Oil to be Qualified as a Mechanical Lubricant pp. 50-66

Muhammad Sharil Yahayaa, Nurliyana Abdul Raof, Zulkifli Ibrahim, Azniza Ahmad and Chandima Gomes

Volume 8, issue 4, 2018

Hybrid Modelling and Optimization of the Oblique Cutting of AISI 1045 Steel pp. 1-22

Iván La Fé Perdomo, Ramón Quiza, Marcelino Rivas and Veena Ramtahalsing

Project of Inventive Ideas Through a TRIZ Study Applied to the Analysis of an Innovative Urban Transport Means pp. 35-62

Leonardo Frizziero, Giampiero Donnici, Gianni Caligiana, Alfredo Liverani and Daniela Francia

Microstructure and Mechanical Properties of Metal Powder Treated AISI-430 FSS Welds pp. 63-83

M.O.H. Amuda, F.T. Lawal, M. A. Onitiri, E. T. Akinlabi and S. Mridha

Volume 8, issue 3, 2018

Fuzzy Logic Based Path Planning for Industrial Robot pp. 1-11

Supriya Sahu and Bibhuti Bhusan Choudhury

Investigating Heat Sink Properties for an Efficient Construction of Energy Generating Cook Stove for Rural Settlers pp. 12-22

M.E. Emetere, O.D. Okonkwo and S. Jack-Quincy

Geometrically Non-Linear Frequency Response of Axially Functionally Graded Beams Resting on Elastic Foundation Under Harmonic Excitation pp. 23-43

Hareram Lohar, Anirban Mitra and Sarmila Sahoo

Parameter Design of High-Resolution E-Jet Micro-Fabrication Process by Taguchi Utility Approach pp. 44-58

Raju Das and Shibendu Shekhar Roy

Volume 8, issue 2, 2018

Study and Simulation of a Hydropneumatic Suspension for Telescopic Handler Vehicles pp. 1-18

Nicola Bosso, Emanuele Conte, Aurelio Somà and Nicolò Zampieri

Weight Minimization of a Speed Reducer Using Prey Predator Algorithm pp. 19-32

Surafel Luleseged Tilahun and Maba B. Matadi

Effect of Weld Groove Area on Distortion of Butt Welded Joints in Submerged Arc Welding pp. 33-44

Mahendramani G and Lakshmana Swamy N

Effect of Varying Wt% of TiC on Mechanical and Wear Properties of RZ5-TiC In-Situ Composite pp. 45-56

Deepak Mehra, M.M. Mahapatra and S. P. Harsha

Volume 8, issue 1, 2018

Tolerance Analysis Supports Tolerance Assignment: The Industrial Case Study of Skillet pp. 1-20

Wilma Polini, Andrea Corrado and Costanzo Cavaliere

Optimisation of the Bauer Equation Using the Least Squares Method for Thermoplastics Turning pp. 21-36

János Farkas, Etele Csanády and Levente Csóka

An Optimal Image Processing Method for Simultaneous Detection of Weld Seam Position and Weld Gap in Robotic Arc Welding pp. 37-53

Amruta Rout, Deepak Bbvl, Bibhuti Bhusan Biswal, Golak Bihari Mahanta and Bala Murali Gunji

Mechanical Strength Of Nafion®/ZrO2 Nano-Composite Membrane pp. 54-65

Rudzani Sigwadi, Fulufhelo Ṋemavhola, Simon Dhlamini and Touhani Mokrani

Volume 7, issue 4, 2017

Comprehensive Considerations on Material Selection for Lightweighting Vehicle Bodies Based on Material Costs and Assembly Joining Technologies pp. 1-14

He (Herman) Tang

Surface Micro Patterning of Aluminium Reinforced Composite through Laser Peening pp. 15-27

G. Ranjith Kumar, G. Rajyalakshmi and Vijaya Kumar Manupati

Effect of Composition of Fibers on Properties of Hybrid Composites pp. 28-43

R. Panneer

Robots in Medicine: Past, Present and Future pp. 44-64

Hruday Kasina, M. V. A. Raju Bahubalendruni and Rahul Botcha

Volume 7, issue 3, 2017

Evaluation and Indexing of Process Plans Based on Electrical Demand and Energy Consumption pp. 1-19

Omar Ahmed Al-Shebeeb, Sivakumar Rangaswamy, Bhaskaran Gopalakrishan and Dayakar G. Devaru

Optimal Model Parameters of Inverse Kinematics Solution of a 3R Robotic Manipulator Using ANN Models pp. 20-40

Nikolaos E. Karkalos, Angelos P. Markopoulos and Michael F. Dossis

Automated Control and Optimisation of Overhead Cranes pp. 41-68

Ashwani Kharola and Pravin P. Patil

A Particle Swarm Optimization Approach for Minimizing GD&T Error in Additive Manufactured Parts: PSO Based GD&T Minimization pp. 69-80

Vimal Kumar Pathak and Amit Kumar Singh

Volume 7, issue 2, 2017

The Impact of Firm Size in the Formulation of Sustainable Manufacturing Strategy Infrastructural Decisions Under Uncertainty pp. 1-18

Lanndon Ocampo

Identification of Optimal Condition for Solid State Welding of Al/SiCp Composite using Taguchi Principles Integrated TOPSIS (TPIT) Method pp. 19-37

Adalarasan Ramalingam and Santhanakumar Muthuvel

Dynamics of Deformable Fractal Surface in Contact with Harmonically Excited Rigid Flat pp. 38-62

Tamonash Jana, Anirban Mitra and Prasanta Sahoo

Attenuation-Based Cable Design for High-Quality Manufacturing pp. 63-81

Leonid Burstein and Asher Bohbot

Volume 7, issue 1, 2017

Mechanical Performance and Fracture Behavior of Recycled AA6061-T6 Alloy Melted from Aluminium Chips pp. 1-17

Naveed Akhtar, Razzaq Ahmed, Muhammad Arfan and Muhammad Noshad Ali

Experimental Investigation On Cylinder Vibration Analysis, Combustion, Emission and Performance Of An IDI Engine pp. 18-36

Prasada Rao Kancherla and Venkata Appa Rao Basava

Improvement of Tensile Behaviour of Tin Babbitt by Reinforcing with Nano Ilmenite and its Optimisation by using Response Surface Methodology pp. 37-51

M. Vijaya Sekhar Babu, A. Rama Krishna and K.N.S. Suman

Performance of Solar Power Refrigerator Using Different Materials: A Comparison pp. 52-66

P. Govinda Rao, V. Jagadeesh, K. Santa Rao and V. Chittibabu

Volume 6, issue 4, 2016

Dynamic Behaviour and Crack Detection of a Multi Cracked Rotating Shaft using Adaptive Neuro-Fuzzy-Inference System: Vibration Analysis of Multi Cracked Rotating Shaft pp. 1-10

Rajeev Ranjan

Angular Torque Methodology for Cylinder Head Bolted Joint and Validation by FE and Experimental Work pp. 11-29

Abhijeet Vithal Marathe, Neelkanth V. Marathe and G. Venkatachalam

An Investigation in Abrasive Waterjet Cutting of Al6061/SiC/Al2O3 Composite Using Principal Component Based Response Surface Methodology pp. 30-47

M. Santhanakumar, R. Adalarasan and M. Rajmohan

Parameter Optimization of Thermal Barrier Coatings used in Two Stoke Externally Scavenged S.I. Engine using Non-Traditional Optimization Algorithms pp. 48-62

Shailesh Dhomne and Ashish M. Mahalle

Volume 6, issue 3, 2016

Effect of Heat Treatment on Microstructure and Tensile Properties of A356/V2O5 Insitu Composites pp. 1-10

Amneesh Singla, Rajnish Garg and Mukesh Saxena

Effect of Microstructure Degradation on Fracture Toughness of 20MnMoNi55 Steel in DBT Region pp. 11-27

Sumit Bhowmik, Prasanta Sahoo, Sanjib Kumar Acharyya, Sankar Dhar and Jayanta Chattopadhyay

Thermal Power Plant Modelling with Fault Coverage Stochastically pp. 28-44

Nupur Goyal, Mangey Ram, Akshay Bhardwaj and Amit Kumar

The Use of a Robotic Arm for Displacement Measurements in a Cantilever beam pp. 45-57

George Lucas Dias, Ricardo Rodrigues Magalhães, Danton Diego Ferreira and Felipe Augusto Vitoriano

Volume 6, issue 2, 2016

Automotive Water Cooling System Analysis Subject to Time Dependence and Failure Issues pp. 1-22

Nupur Goyal, Ajay Kaushik and Mangey Ram

A Review on Fabricating Procedures in Rapid Prototyping pp. 23-40

Ganzi Suresh and K. L. Narayana

Gasoline and Synthetic Fuel from Plastic Waste: Study for Engine Performance pp. 41-50

Apip Amrullah

Thermo-Mechanical Analysis on Thermal Deformation of Thin Stainless Steel in Laser Micro-Welding pp. 51-66

Mohd Idris Shah Ismail, Yasuhiro Okamoto and Akira Okada

Volume 6, issue 1, 2016

Cutting Speed in Nano-Cutting as MD Modelling Parameter pp. 1-13

Nikolaos E. Karkalos, Angelos P. Markopoulos and Dimitrios E. Manolakos

Electroless Nickel-Phosphorus Composite Coatings: A Review pp. 14-50

Prasanna Gadhari and Prasanta Sahoo

FEA Simulation Based Performance Study of Multi Speed Transmission Gearbox pp. 51-61

Ashwani Kumar and Pravin P. Patil

Improvement in Power Efficiency of Injection Molding Machine by Reduction in Plasticization Losses pp. 62-76

Muhammad Khan, Nizar Ullah Khan, Muhammad Junaid Aziz, Hafiz Kaleem Ullah and Muhammad Ali Shahid