Technium

2019 - 2023

Current editor(s): Scurtu Ionut Cristian

From Technium Science
Bibliographic data for series maintained by Ana Maria Golita ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 4, issue 8, 2022

Delay Factors of Construction Projects in Oman pp. 1-10

Amur Ali Mussallam Al Amri

Early Detection Software for Diabetes Retinopathy pp. 11-17

Roua Waleed

A Review for Video Authentication and Integrity pp. 18-22

Rahma Nazar

Performance and reliability of exhaust gas recovery units for marine engines pp. 23-32

CatalÑ–n FaÑ–tar

Reliability Analysis of State Building in Banjar District pp. 33-55

Rahmah Sumantri

Experimental methods for determining the characteristic quantities of unconventional naval propellers pp. 56-63

C. M Nita

Detecting network attacks Model based on a long short-term memory LSTM pp. 64-72

Teba Ali Muna M. Taher

Management system for displaced families in displacement camps pp. 72-86

Yasir Shayma Mustafa

Volume 4, issue 7, 2022

Experimental study of admixture on Bentonite clay reinforced concrete as a partial substitute to cement pp. 1-10

Siraj Ahmed

Synthesis, characterization and mechanical study of polypropylene polymer based reinforced concrete with different admixture pp. 11-21

Syed Mahmood Mohiuddin Sarmast

Analytical Study of Dynamic and Vibrational of Composite Shell with Piezoelectric Layer using GDQM Method pp. 22-39

Amin Moslemi Petrudi

Using the Internet in counseling work during the (Covid 19) Corona pandemic in Anbar province, Iraq pp. 40-51

Jasim Mohammed Saleh

Design of Sustainable Building by Considering Green Materials – Case Study in Salalah Oman pp. 52-71

Ahmed Al Kathiri

A study on The Level of Environmental Pollution by Heavy Metals in The City of Sebha-Libya pp. 72-81

Kafaa Fadhil Abbas

Volume 4, issue 6, 2022

Simulation of an electro-hydraulic circuit for ALARS pp. 1-10

Duțu I.c

The application of factor analysis (FA) in evaluating supplier selection criteria in PT. Wijaya Karya Beton Tbk and ranking suppliers using integration of analytical hierarchy process (AHP) and adaptive ratio assessment (ARAS) pp. 11-17

Tri Wahyuningsih

Survey of Blowfish Algorithm for Cloud pp. 18-28

Shamil Ezadeen

Analyze of multipurpose ship main dimensions designed by technical criterion pp. 29-34

Yordan Denev

Analytical Study of the Penetration of Long Rod Projectiles with Conical and Blunt Nose in Normal and Oblique Ceramic Targets pp. 35-49

Bahman Salimi

Increase in average crop and leanness of eucalyptus (Eucalyptus Pelita) at Pt Itci Hutani Manunggal, Kutai Kartanegara Regency pp. 50-57

Legowo Kamarubayana

Modeling and fault detection of a turbofan engine by deep-learning approach pp. 58-83

Offole Florence

Constructing a Software Tool to Optimize Performance by Coupling Detection pp. 84-98

Tawfeeq Tawfeeq

Improved ship position stability on offshore-based dynamic position maintenance with the PID method pp. 99-112

Hermono Dutopo

Analysis and Testing of the Expansion Tank in the Rectangular Flow Channel FASSIP-04 Ver.0 pp. 113-122

Dwi Yuliaji

Volume 4, issue 1, 2022

Hydrogen Storage in Offshore Salt Caverns for Reducing Ships Carbon Dioxide Footprint pp. 1-11

Iulian Vlăducă

Optimal Capacitor Placement in Power Distribution System pp. 1-7

Raghavendra Dakuri Venkata

Increasing The Taxonomic Accuracy of Remote Sensing Data Using Traditional Pattern Recognition Methods pp. 1-10

Alhan Anwer Younis Alsafar

Usage one of Reverse Engineering Application (Node.js Web) to Construct Software Engineering Documents pp. 1-10

Naktal Moaid Edan

The Stokes’ Theorem pp. 8-23

Ghiyasuddin Ghawsi

Review of ship behavior characteristics when operating at sea pp. 8-14

Ionut Scurtu

The Impact of the Relation Between Movement Patterns and Nodes Distribution on the Performance of Smart Cities pp. 11-18

Wael Hadeed

Developing A Network Model for the Iraqi Political Coalitions pp. 11-20

Thaer Alramli

The Theory of Magnitudes pp. 11-14

Daniel Weinstock

Piecewise-defined function for effectively implementing the audio volume automation pp. 12-22

Yasir Shayma Mustafa

The use of double-acting cylinders in electro-hydraulic circuit pp. 15-20

I.C. Duțu

Differential Distribution Table implementation DDT survey pp. 15-30

Mohammed Eid Khamees Al-Shammary

A Method for Investigating Coverage Area Issue in Dynamic Networks pp. 19-27

Zaid Mundher

NX ship modelilng for AHTS ships safety management pp. 21-25

C. Berescu

Using of the Supporting Awareness Program to Increase the Productivity of Wheat Crops During the Covid 19 Pandemic of Anbar Province/Iraq pp. 21-31

Jasim Mohammed Saleh

In this work, three control techniques of minimization of torque ripple in SRM are proposed and compared to the classical control technic names as Hysteresis control proposed in [1]. The principle of these methods is based on the Torque Sharing Function (TSF) fixing the reference torque in each phase. In the literature review, the classical method used in the reduction of torque ripples in SRM is the TSF-Hysteresis Controller (TSF-H). The first proposed method is the TSF-Predictive control (TSF-P), here the objective is to find the voltage to be applied to the machine minimizing the error of the current through a prediction algorithm on the supply current. The second proposed method is the sliding mode control (TSF-SMC-PSO) whose parameters are optimized by the particle swarm algorithm (PSO). Finally, the third proposed method is the sliding mode controller whose parameters are optimized by fuzzy logic controller (TSF-SMFC). The finite element method (FEM) through the magnetic field calculation software FEMM was used to calculate the flux and torque in static system and to take into account magnetic saturation circuit of the SRM. The results obtained show that the TSF-SMC-PSO control methods have better performance compared to the other proposed methods mentioned above pp. 23-46

Sissinvou Manassé

Digital Image Encryption Techniques: Article Review pp. 24-35

Enas Ali Jameel

uPark: a progressive web parking application pp. 26-38

Konstantinos Panos

Survey on Software code clone detection pp. 28-36

Yasir Mohammed Khazaal

A Lightweight Portable Multithreaded Client-Server Docker Containers pp. 31-43

Awse S. Mahmood Alsaffar

Study of the risk analysis associated with multimodal maritime transport pp. 32-36

O. Ștefаnov

Study of double acting cylinder with two in and out piston rods pp. 36-43

I.C. Duțu

Gait Classification Using Machine Learning for Foot Disseises Diagnosis pp. 37-49

Ayat N. Hussain

Survey of using grasshopper algorithm pp. 37-44

Hanaa Mohammed Osman

Collision Warning System Using Naïve Bayes Classifier pp. 39-56

Ahmed Tijani

Content Design Recommendation for Digital Product of Public Aquarium Using QFD pp. 44-54

Dewi Retno Dumilah

Implementation of Features Selection Based on Dragonfly Optimization Algorithm pp. 44-52

Nadia Mohammed Majeed

Deinking paper in a neutral medium, through a treatment with amino acids, in flotation columns pp. 45-57

J. González Pineda

Real-time Face Tracking for Service-Robot pp. 47-52

Dhuha Basheer Abdullah

Feasibility study of Haffa Mini- hydropower plant in Bambasi Woreda pp. 50-74

Abdu Biru

Computing the Cost of Service Projects in Telkaif Town Using Soft Sets and Soft Topology pp. 53-61

Sabih W. Askandar

Research regarding use of pneumatic linear actuator pp. 55-63

I.C. Duțu

Mobility Models as a Key-Performance Factor for Wireless Networks pp. 57-66

Ayad Hussain Abdulqader

Metaverse and Banking Industry – 2023 The Year of Metaverse Adoption pp. 62-73

Mr. Vivek Dubey

Software Size Estimation: A survey pp. 62-70

Aeshaa L . Al-Saleem

Forecasting Weekly COVID-19 Infection and Death Cases in Iraq Using an ARIMA Model pp. 64-75

Mohammed Hussein Jabardi

The development of a real time, interactive water level monitoring system through SMS with AC load control pp. 67-76

Jordan Buhion

The comparative study of the influence of the parameters of the technological process of abrasive flow machining of the nozzle holes of the fuel injectors on the performance of the injection system pp. 74-82

Dorinel Popa

A crowdsensing cloud-based microservice for weather forecast pp. 76-88

Dimitris Selis

Token-based code clone detector for Dart language pp. 77-82

Yasir Mohammed Khazaal

Proposed a WebRTC Data Communication Using Effective Signalling Protocol pp. 83-96

Sanabil A. Mahmood

A Review of the Blowfish Algorithm Modifications in Terms of Execution Time and Security pp. 89-101

Raghad Abdul Hadi Abdul Qader

Effect of single and multi-strain probiotics on egg production and blood parameters of local Tegal ducks under village system pp. 97-103

Imam Suswoyo

Implementation of PRIME-HRM Program Using Cloud-Based Technology pp. 102-119

Jacob P. Manahan

Detection and diagnosis of skin diseases by using snake algorithm and neural networks pp. 104-114

Ramadan Mahmood Ramo

Comparative Evaluation of Prediction Model between Inference Fuzzy System and Universal Kriging for Spatial Data pp. 115-125

Ghanim Mahmood Dhaher

High Accurate Automatic School Bell Controller Based On ESP-32 Wi-Fi pp. 126-144

Riyadh Zaghlool Mahmood

Traditional media versus social media: challenges and opportunities pp. 145-160

Marwan Walid Mohammad Al-Quran

Study of biological and management of fisheries of squid (Loligo sp.) that was land at PPP Tasik Agung Rembang pp. 161-173

Rahmasari Gita Pertiwi

Integration of Technology in English Classroom Interaction pp. 174-187

Muhammad Basri D

Applying Effective Software for Controlling Computers Remotely pp. 188-196

Marwa J.M. Zedan

Experimental study of tensile strength for 3D printed specimens of HI-PLA polymer material on in-house tensile test machine pp. 197-206

Danijela Pezer

Effect of Crude Aloe Vera Extract on the Histopathology of Gurame Fish (Osphronemus Gouramy) Infected with the Bacteria Edwarsiella tarda pp. 207-216

Nuranti Anarkhis

The Ability of Scratch Teaching in Programming Language—Taking Roguelike Mathematical Games as an Example pp. 217-238

Tingsheng Weng

Models for Predicting River Suspended Sediment Load Using Machine Learning: A Survey pp. 239-249

Lubna Jamal Chachan

Fuzzy Regression Analysis with a proposed model pp. 250-273

AyÅŸe Tansu

Internet of things in health care: case of cardiovascular diseases in Congo Brazzaville pp. 274-288

Ali Ouchar Cherif

New technologies to detect electron beam signals pp. 289-295

Alion Alizoti