Stochastics and Quality Control

2001 - 2024

Current editor(s): George P. Yanev

From De Gruyter
Bibliographic data for series maintained by Peter Golla ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Maintenance Policies with Minimal Repair pp. 143-166: Mamabolo R. M. and Beichelt F. E.
Analysis of a Repairable System Subjected To Multiple Modes of Failure pp. 167-173: Hajeeh Mohammed
Run Length Variability and Three Sigma Control Limits pp. 175-184: Govindaraju K. and Lai C. D.
Estimating Structural Reliability in the Presence of Covariates Via Bayesian Methods pp. 185-196: Ho Linda Lee
A Note on Point Estimation of System Reliability Exemplified for the Log-Logistic Distribution pp. 197-204: Rao G. Srinivasa and Kantam R. R. L.
A Note on Testing Exponentiality Against New Better Than Used of Specified Age pp. 205-213: Pandit Parameshwar V.
Measurement Procedures for Improving the Variability Function pp. 215-228: Stübner Dmitri, Sans Wolfgang, Zhai Xiaomin, Sen Surath and Elart von Collani
The Least Cost Testing Sequence Problem pp. 229-239: Kumar V. S. Sampath, Sarma K. V. S. and Sekhar K.
Process Control for Three Quality Classes and Three Repair Actions pp. 241-250: Shankar Gauri
Standardisation of Flour Testing in Alveograph NG pp. 251-263: Das Prasun and Gauri Susanta Kumar
A Problem Called ISO 2859-1 Sampling Procedures for Inspection by Attributes - Part 1 pp. 265-276: Elart von Collani

Economic Design of A Dynamic CCC – r Chart for High-Yield Processes pp. 7-21: Kudo Kazuki, Ohta Hiroshi and Kusukawa Etsuko
A Note on Average Run Lengths of Moving Average Control Charts pp. 23-27: Zhang Lingyun, Lai C. D., Govindaraju K. and Bebbington M.
A Group Runs Control Chart for Detecting Shifts in the Process Mean pp. 29-43: Gadre M. P. and Rattihalli R. N.
A Capability Index Calibrated to the Nonconformance Probability pp. 45-59: Ho Linda Lee, Borges Wagner Sousa and Barriga Glady D. C.
Stochastic Methods for Production Processes pp. 61-82: Elart von Collani and Dumitrescu Monica
Parametric Bivariate Regression Analysis Based on Censored Samples: A Weibull Model pp. 83-90: Hanagal David D.
A Note on Savings in Experimental Time Under Type II Censoring pp. 91-95: Kantam R. R. L. and Rao G. Srinivasa
Expected Time for Attainment Threshold Level A Shock Model Approach pp. 97-105: Jeeva M., Rajagopal Rajalakshmi, William Martin L. and Yadavalli V. S. S.
Maintenance Models for a Repairable System pp. 107-114: Hajeeh Mohammed
Minimum Average Fraction Inspected for Combined Continuous Lot by Lot Acceptance Sampling Plan pp. 115-119: Chen Chung-Ho
Minimum Risk Acceptance Sampling Plans: A Review pp. 121-126: Subramani K.
Improving Resistivity of Resin pp. 127-132: Das Nandini

NP-Optimal Kernels for Nonparametric Sequential Detection Rules pp. 149-163: Steland Ansgar
Availability Formulas and Performance Measures for Separable Degradable Networks pp. 165-194: Sauer Cornelia and Daduna Hans
Bayesian Predictions for Exponentially Distributed Failure Times With One Change-Point pp. 195-207: Abdel-Aty Y., Franz J. and Mahmoud M. A. W.
Bayes Inference Problems in Failure-Repair Processes pp. 209-222: Franz Jürgen and Abdel-Aty Yahia
Forecasting of Categorical Time Series Using a Regression Model pp. 223-240: Pruscha Helmut and Göttlein Axel
Estimation of a Threshold-Value in the Context of Air Pollution and Health pp. 241-249: Kuhlisch Wiltrud
Estimation of the Jump-Point in a Hazard Function pp. 251-261: Abdel-Aty Yahia and Ferger Dietmar
Distributions of the Estimated Process Capability Index Cpk pp. 263-279: Lin G. H. and Pearn W. L.

On the Distribution of the Estimated Process Capability Index Cpmk pp. 5-30: Pearn W. L., Lin G. H. and Chang C. S.
Nonparametric Capability Indices pp. 31-41: Ramanathan T. V., Dharmadhikari A. D. and Abraham Bovas
Statistical Inference from Boyles' Capability Index pp. 43-57: Ho Linda Lee
Time Dependent Availability of K-out-of-N:G Systems with Exponential Failures and General Repairs pp. 59-66: Moustafa Magdi S.
A Note on Monotonic Probability Distributions pp. 67-81: Sans Wolfgang and Elart von Collani
A Note on the Murthy-Sarma Estimators of the Mean of the Normal Distribution for Small Samples pp. 83-90: Anis M. Z. and Pandey R. J.
Charts for Detecting Small Shifts pp. 91-100: Sivasamy R. and Jayanthi S.
False Alarm Probability Function of Cusum Charts pp. 101-112: Nishina Ken and Nishiyuki Shintaro
The Validation of the Human Contribution to Quality: A Case Study at Lockheed Martin Aeronautics - Fort Worth pp. 113-133: Getty Robert L.

Determination of Specifications for Tensile Strength of Castings pp. 135-144: Anis M. Z.
Joint Design of Economic Manufacturing Quantity, Sampling Plan and Specification Limits pp. 145-153: Chen Chung-Ho and Chou Chao-Yu
Measurement Procedures for the Variance of a Normal Distribution pp. 155-176: Elart von Collani, Dumitrescu Monica and Panaite Victorina
A Bayesian View on Detecting Drifts by Nonparametric Methods pp. 177-186: Steland Ansgar
Combining Process and Product Control for Reducing Sampling Costs pp. 187-194: Suresh K. K. and Devaarul S.
Modelling of Explosives Sensitivity Part 2: The Weibull-Model pp. 195-220: Wild Roland and Elart von Collani
Modified Tightened Three Level Continuous Sampling Plan pp. 221-234: Balamurali Saminathan
A Note on the Continuous Sampling Plan CSP-V pp. 235-239: Chen Chung-Ho and Chou Chao-Yu

Optimal Minimal Maintenance of Multistage Degraded System with Repairs pp. 5-12: Moustafa Magdi S.
Performability of Two Modules in Series pp. 13-21: Moustafa Magdi S.
Process Targeting for Optimal Capability when the Product is Subject to Degradation pp. 23-38: Veevers Alan and Sparks Ross
Optimal np Control Charts with Variable Sample Sizes or Variable Sampling Intervals pp. 39-61: Luo Hua and Wu Zhang
A Process Control Plan with Two-Phase Inspection pp. 63-73: Shankar Gauri and Sahu Ajay Kumar
A Note on Selecting Target and Process Capability Index Based on Fuzzy Optimization pp. 75-80: Chen Chung-Ho and Chou Chao-Yu
Prediction Intervals, Tolerance Intervals and Standards in Quality Control - Part 1 pp. 81-98: Elart von Collani and Baur Karl
Comparison of Semi-Economic and -R Control Charts for Non-Ageing and Ageing Process pp. 99-112: Turnes Osiris, Lee Ho Linda and Imaña Christian Rainier
Modelling of Explosives Sensitivity Part 1: The Bruceton Method pp. 113-122: Wild Roland and Elart von Collani