Stochastics and Quality Control

2001 - 2026

Current editor(s): George P. Yanev

From De Gruyter
Bibliographic data for series maintained by Peter Golla ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

NP-Optimal Kernels for Nonparametric Sequential Detection Rules pp. 149-163: Steland Ansgar
Availability Formulas and Performance Measures for Separable Degradable Networks pp. 165-194: Sauer Cornelia and Daduna Hans
Bayesian Predictions for Exponentially Distributed Failure Times With One Change-Point pp. 195-207: Abdel-Aty Y., Franz J. and Mahmoud M. A. W.
Bayes Inference Problems in Failure-Repair Processes pp. 209-222: Franz Jürgen and Abdel-Aty Yahia
Forecasting of Categorical Time Series Using a Regression Model pp. 223-240: Pruscha Helmut and Göttlein Axel
Estimation of a Threshold-Value in the Context of Air Pollution and Health pp. 241-249: Kuhlisch Wiltrud
Estimation of the Jump-Point in a Hazard Function pp. 251-261: Abdel-Aty Yahia and Ferger Dietmar
Distributions of the Estimated Process Capability Index Cpk pp. 263-279: Lin G. H. and Pearn W. L.

On the Distribution of the Estimated Process Capability Index Cpmk pp. 5-30: Pearn W. L., Lin G. H. and Chang C. S.
Nonparametric Capability Indices pp. 31-41: Ramanathan T. V., Dharmadhikari A. D. and Abraham Bovas
Statistical Inference from Boyles' Capability Index pp. 43-57: Ho Linda Lee
Time Dependent Availability of K-out-of-N:G Systems with Exponential Failures and General Repairs pp. 59-66: Moustafa Magdi S.
A Note on Monotonic Probability Distributions pp. 67-81: Sans Wolfgang and Elart von Collani
A Note on the Murthy-Sarma Estimators of the Mean of the Normal Distribution for Small Samples pp. 83-90: Anis M. Z. and Pandey R. J.
Charts for Detecting Small Shifts pp. 91-100: Sivasamy R. and Jayanthi S.
False Alarm Probability Function of Cusum Charts pp. 101-112: Nishina Ken and Nishiyuki Shintaro
The Validation of the Human Contribution to Quality: A Case Study at Lockheed Martin Aeronautics - Fort Worth pp. 113-133: Getty Robert L.

Determination of Specifications for Tensile Strength of Castings pp. 135-144: Anis M. Z.
Joint Design of Economic Manufacturing Quantity, Sampling Plan and Specification Limits pp. 145-153: Chen Chung-Ho and Chou Chao-Yu
Measurement Procedures for the Variance of a Normal Distribution pp. 155-176: Elart von Collani, Dumitrescu Monica and Panaite Victorina
A Bayesian View on Detecting Drifts by Nonparametric Methods pp. 177-186: Steland Ansgar
Combining Process and Product Control for Reducing Sampling Costs pp. 187-194: Suresh K. K. and Devaarul S.
Modelling of Explosives Sensitivity Part 2: The Weibull-Model pp. 195-220: Wild Roland and Elart von Collani
Modified Tightened Three Level Continuous Sampling Plan pp. 221-234: Balamurali Saminathan
A Note on the Continuous Sampling Plan CSP-V pp. 235-239: Chen Chung-Ho and Chou Chao-Yu

Optimal Minimal Maintenance of Multistage Degraded System with Repairs pp. 5-12: Moustafa Magdi S.
Performability of Two Modules in Series pp. 13-21: Moustafa Magdi S.
Process Targeting for Optimal Capability when the Product is Subject to Degradation pp. 23-38: Veevers Alan and Sparks Ross
Optimal np Control Charts with Variable Sample Sizes or Variable Sampling Intervals pp. 39-61: Luo Hua and Wu Zhang
A Process Control Plan with Two-Phase Inspection pp. 63-73: Shankar Gauri and Sahu Ajay Kumar
A Note on Selecting Target and Process Capability Index Based on Fuzzy Optimization pp. 75-80: Chen Chung-Ho and Chou Chao-Yu
Prediction Intervals, Tolerance Intervals and Standards in Quality Control - Part 1 pp. 81-98: Elart von Collani and Baur Karl
Comparison of Semi-Economic and -R Control Charts for Non-Ageing and Ageing Process pp. 99-112: Turnes Osiris, Lee Ho Linda and Imaña Christian Rainier
Modelling of Explosives Sensitivity Part 1: The Bruceton Method pp. 113-122: Wild Roland and Elart von Collani

On the Design of Single Sample Acceptance Sampling Plans pp. 193-198: McWilliams Thomas P., Saniga Erwin M. and Davis Darwin J.
Design of R control Chart Assuming a Gamma Distribution pp. 199-204: González I. M. and Viles E.
Squared Error Loss of Process Capability Indices pp. 205-209: Chen Chung-Ho and Chou Chao-Yu
Statistical Process Control Based on Attribute Data Obtained by a Narrowed Tolerance pp. 211-225: Rozno Mark I.
OECD PISA - An Example of Stochastic Illiteracy? pp. 227-253: Elart von Collani
Optimal Productivity and Investments in Quality: An Operations Parametric Model pp. 255-269: Kulkarni Shailesh S., Jayakumar Maliyakal D. and Prybutok Victor R.

ARL Comparisons Between Neural Network Models and -Control Charts for Quality Characteristics that are Nonnormally Distributed pp. 5-15: Yi Junsub, Prybutok Victor R. and Clayton Howard R.
A Note on the Convolution of the Uniform and Related Distributions and Their Use in Quality Control pp. 17-41: Killmann Frank and Elart von Collani
An Integrated Approach for Designing a Sampling Plan and Fixing Specifications pp. 43-48: Chen Chung-Ho and Chou Chao-Yu
Statistical Process Control Methods from the Viewpoint of Industrial Application pp. 49-63: Anghel Constantin
A First-Passage Time Problem in Reliability Theory pp. 65-73: Beichelt Frank
Availability of K-out-of-N:G Systems with Exponential Failures and General Repairs pp. 75-82: Moustafa Magdi S.
Selection of Sampling Schemes Indexed by Crossover Point for Compliance Testing pp. 83-92: Balamurali S.
Bayesian Single Sampling Plans for a Gamma Prior pp. 93-107: Suresh K. K. and Latha M.
Neyman Measurement and Prediction Procedures pp. 109-132: Elart von Collani, Dumitrescu Monica and Lepenis Rouven
Towards Practical and Synthetical Modelling of Repairable Systems pp. 147-182: Guo R., Ascher H. and Love E.
Reliability Analysis of Systems with Time-Varying Failure Rates pp. 183-191: Moustafa Magdi S.