International Journal of Reliability and Safety

2006 - 2025

From Inderscience Enterprises Ltd
Bibliographic data for series maintained by Sarah Parker ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 7, issue 4, 2013

Reliability evaluation of overall wind energy conversion system incorporating power electronic inverter pp. 319-331

Sumant G. Kadwane and Dusmanta Kumar Mohanta

Out of range error probability assessment for any computer program pp. 332-357

Sushant Mohan Dewal and Neeraj Kumar Goyal

Maintenance class-based cost-effective preventive maintenance scheduling of coal-fired power plants pp. 358-371

Debasis Das Adhikary, Goutam Kumar Bose, Dipankar Bose and Souren Mitra

An S-shaped software reliability model with imperfect debugging and improved testing learning process pp. 372-387

Pratik Roy, G.S. Mahapatra and Kashi Nath Dey

Feasibility of analytical solution for transient availability using semi-Markov process pp. 388-410

Girish Kumar, Vipul Jain and O.P. Gandhi

Volume 7, issue 3, 2013

Separable Monte Carlo combined with importance sampling for variance reduction pp. 201-215

Anirban Chaudhuri and Raphael T. Haftka

Assessing structural health of helicopter fuselage panels through artificial neural networks hierarchies pp. 216-234

Antonio Candelieri, Raul Sormani, Gaia Arosio, Ilaria Giordani and Francesco Archetti

Reliability prediction of distributed systems using Monte Carlo method pp. 235-248

Indra Gunawan

Uncertainty modelling of large deformation process using a new aggregation rule of evidence pp. 249-275

Shahab Salehghaffari

Optimised estimation technique of Weibull lifetime model by using prior information pp. 276-292

Zuhair A. Al-Hemyari and A.R. Al-Ali

Uncertainty propagation in fatigue crack growth analysis using dimension reduction technique pp. 293-317

Hongshuang Li, Yibing Xiang, Lei Wang, Jianren Zhang and Yongming Liu

Volume 7, issue 2, 2013

Optimum number of minimal repairs for a system under increasing failure rate shock model with cumulative repair-cost limit pp. 95-107

Min-Tsai Lai

Detection of faults in flight control actuators with hard saturation and friction non-linearity pp. 108-127

Jayakumar Madhavanpillai and Bijan B. Das

Mechatronic system reliability modelling and analysis: a graph theoretic approach pp. 128-155

C. Phaneendra Kiran, Shibu Clement and V.P. Agrawal

Reliability assessment using probabilistic support vector machines pp. 156-173

Anirban Basudhar and Samy Missoum

Reliability modelling and analysis of component-based software system: a graph theoretic systems approach pp. 174-199

Nitin Upadhyay, Bharat Madhusudan Deshpande and Vishnu P. Agarwal

Volume 7, issue 1, 2013

A measurement-based approach for estimating error rate of a web server system pp. 1-16

Xiao Xiao and Tadashi Dohi

A metric to detect fault-prone software modules using text filtering pp. 17-31

Osamu Mizuno and Hideaki Hata

Predicting residual software fault content and their location during multi-phase functional testing using test coverage pp. 32-57

Carol S. Smidts and Ying Shi

Reliability and performance modelling of VoIP system with multiple component failures pp. 58-74

Vandana Gupta and S. Dharmaraja

Performance-based optimum design of structures with vulnerability objectives pp. 75-94

Vissarion Papadopoulos and Nikos D. Lagaros

Volume 6, issue 4, 2012

Algorithms for minimising the lost flow due to failed components in repairable flow networks with complex topology pp. 283-310

Michael T. Todinov

Quantifying uncertainty in statistical distribution of small sample data using Bayesian inference of unbounded Johnson distribution pp. 311-337

Kun Marhadi, Satchi Venkataraman and Shantaram S. Pai

Load-share reliability models with the piecewise constant load pp. 338-353

Sergey V. Gurov and Lev V. Utkin

Fuzzy fault tree approach for analysing the fuzzy reliability of a gas power plant pp. 354-371

Manjit Verma, Amit Kumar and Yaduvir Singh

An optimum test stopping criterion based on software reliability modelling and Taguchi methods pp. 372-385

Boby John

Volume 6, issue 1/2/3, 2012

Of reality, quality and Murphy’s law: strategies for eliminating human error and mitigating its effects pp. 3-14

Franz Knoll

Robustness assessment for progressive collapse of framed structures using pushdown analysis methods pp. 15-37

Da-Gang Lu, Shuang-Shuang Cui, Peng-Yan Song and Zhi-Heng Chen

Reliable dynamic analysis of an uncertain shear beam pp. 38-48

Mehdi Modares

Robust assessment of shear parameters from direct shear tests pp. 49-64

Wolfgang Fellin and Michael Oberguggenberger

Simulated polyhedral clouds in robust optimisation pp. 65-81

Martin Fuchs

Predicting the shear resistance of RC beams without shear reinforcement using a Bayesian neural network pp. 82-109

Osimen Iruansi, Maurizio Guadagnini, Kypros Pilakoutas and Kyriacos Neocleous

Structural analysis with probability-boxes pp. 110-129

Hao Zhang, Robert L. Mullen and Rafi L. Muhanna

Estimation of loading conditions of failed crane-hook: an image-based approach with knowledge and simulation pp. 130-147

Takao Muromaki, Kazuyuki Hanahara, Yukio Tada and Takuma Nishimura

Towards optimal effort distribution in process design under uncertainty, with application to education pp. 148-166

Olga Kosheleva and Vladik Kreinovich

Model fusion under probabilistic and interval uncertainty, with application to Earth sciences pp. 167-187

Omar Ochoa, Aaron A. Velasco, Christian Servin and Vladik Kreinovich

Scale-invariant approach to multi-criterion optimisation under uncertainty, with applications to optimal sensor placement, in particular, to sensor placement in environmental research pp. 188-203

Aline Jaimes, Craig Tweedie, Vladik Kreinovich and Martine Ceberio

Socio-ecological safety towards natural and technological disasters: Earth observations and ecological monitoring for water quality analysis pp. 204-224

Yuriy V. Kostyuchenko, Márton László, Maxim V. Yuschenko, Ivan Kopachevskyi and Yulia Bilous

Coupling of satellite observation to increase reliability of analysis of socio-ecological consequences of technological disasters pp. 225-241

Yuriy V. Kostyuchenko, Ivan Kopachevsky, Dmytro Solovyov, Maxim V. Yuschenko, Yulia Bilous and Volodymyr Gunchenko

Accurate and verified numerical computation of the matrix determinant pp. 242-254

Takeshi Ogita

Implementation of fixed structure QFT prefilter synthesised using interval constraint satisfaction techniques pp. 255-281

P.S.V. Nataraj and M.M. Deshpande

Volume 5, issue 3/4, 2011

General purpose stochastic analysis software for optimal maintenance scheduling: application to a fatigue-prone structural component pp. 211-228

Edoardo Patelli, Marcos A. Valdebenito and Gerhart I. Schueller

Recursive least-squares estimation in case of interval observation data pp. 229-249

Hansjorg Kutterer and Ingo Neumann

Robust control of integrating systems using CDM-based two-loop control structure pp. 250-269

Surekha Bhusnur and Shashwati Ray

Interval-based differential evolution approach for combined economic emission load dispatch pp. 270-284

Archana Gupta and Shashwati Ray

A probabilistic quantitative risk assessment model for fire in road tunnels with parameter uncertainty pp. 285-298

Qiang Meng and Xiaobo Qu

Random set finite element method application to tunnelling pp. 299-319

Ali Nasekhian and Helmut F. Schweiger

On the stability and controllability of fuzzy control set differential equations pp. 320-335

Nguyen Dinh Phu and Lam Quoc Dung

A new interval finite element formulation with the same accuracy in primary and derived variables pp. 336-357

M.V. Rama Rao, Robert L. Mullen and Rafi L. Muhanna

Prediction of uncertain structural behaviour and robust design pp. 358-377

Jan-Uwe Sickert, Steffen Freitag and Wolfgang Graf

Robust simulation and design using semi-infinite programs with implicit functions pp. 378-397

Matthew D. Stuber and Paul I. Barton

Fuzzy architecture of systems with alterable information: case study for tyre–ground friction estimators pp. 398-419

Valentin Ivanov

Robust design of turbine blades against manufacturing variability pp. 420-436

Nikita Thakur, A.J. Keane and P.B. Nair

Volume 5, issue 2, 2011

Modelling failure rates according to time and influencing factors pp. 95-109

Florent Brissaud, Brice Lanternier and Dominique Charpentier

Integrated physics-based approach for the reliability prediction of thermal systems pp. 110-139

O.M. Al-Habahbeh, D.K. Aidun, P. Marzocca and H. Lee

Imprecise reliability assessment when the type of the probability distribution of the random variables is unknown pp. 140-157

Efstratios Nikolaidis and Zissimos P. Mourelatos

Optimal redundancy allocation for a reliability-based total cost of ownership model using genetic algorithm pp. 158-181

G. Kanagaraj and N. Jawahar

Testing approach on dynamic fatigue property of PBGA assembly under determinate vibration excitation pp. 182-190

Zixia Chen, Yang Ping, Liqiang Zhang and Liang Qi

Buckling load variability of cylindrical shells with stochastic imperfections pp. 191-208

George Stefanou, Vissarion Papadopoulos and Manolis Papadrakakis

Volume 5, issue 1, 2011

Probabilistic sensitivity methods for correlated normal variables pp. 1-20

H. Millwater, A. Bates and E. Vazquez

Reliability and performance evaluation of extrusion dies pp. 21-43

A.K. Sheikh, M. Younas, A.F.M. Arif and Zuhair Gasem

Reliability analysis using a 'Taylor expansion-expected value' saddlepoint approximation pp. 44-65

Jia Wang, Siu-Kui Au and Ka-Veng Yuen

Bivariate optimal replacement policies for multistate degenerative systems pp. 66-82

P. Govindaraju, U. Rizwan and V. Thangaraj

Posfust reliability of a unified fuzzy Markov model pp. 83-94

B. Praba, R. Sujatha and S. Srikrishna