International Journal of Reliability and Safety

2006 - 2025

From Inderscience Enterprises Ltd
Bibliographic data for series maintained by Sarah Parker ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 3, issue 4, 2009

System design optimisation involving phased missions pp. 331-344

Dovile Astapenko and Lisa M. Bartlett

Calculation of reinforced concrete corrosion initiation probabilities using the Rosenblueth method pp. 345-362

David Conciatori, Eugen Bruhwiler and Stephan Morgenthaler

Reliability-based optimisation of chemical vapour deposition process pp. 363-383

Pradeep George, Po Ting Lin, Hae Chang Gea and Yogesh Jaluria

Availability of deteriorating system under inspection and maintenance strategies pp. 384-396

Mohammed Hajeeh and Magdi S. Moustafa

Safety system design optimisation using a multi-objective genetic algorithm pp. 397-412

Jelena Riauke and Lisa Bartlett

Digital relay software reliability allocation optimisation for transmission line protection pp. 413-426

Diptendu Sihna Roy, A.K. Panda and Dusmanta Kumar Mohanta

Power system components modelling and reliability evaluation of generation capacity pp. 427-441

R.K. Saket, R.C. Bansal and Gurmit Singh

Volume 3, issue 1/2/3, 2009

Validation of imprecise probability models pp. 3-22

Scott Ferson and William L. Oberkampf

Autonomous robust design optimisation with potential clouds pp. 23-34

Martin Fuchs and Arnold Neumaier

Information management for estimating system reliability using imprecise probabilities and precise Bayesian updating pp. 35-56

J.M. Aughenbaugh and J.W. Herrmann

Extreme probability distributions of random sets, fuzzy sets and p-boxes pp. 57-78

A. Bernardini and F. Tonon

An interval-based technique for FE model updating pp. 79-103

Stefano Gabriele and Claudio Valente

Interval analysis and reliability in robotics pp. 104-130

Jean-Pierre Merlet

Design and implementation of an optimal, reliable and robust control system for an industrial plant emulator pp. 131-152

P.S.V. Nataraj, Manoj M. Deshpande and Vishwesh Vyawahare

Extended precision with a rounding mode toward zero environment. Application to the Cell processor pp. 153-173

Hong Diep Nguyen, Stef Graillat and Jean-Luc Lamotte

Engineering quantification of inconsistent information pp. 174-200

Michael Beer

Interval approach for nondeterministic linear static finite element method in continuum mechanics problems pp. 201-217

Hao Zhang and Rafi L. Muhanna

Numerical structural monitoring with the uncertainty model fuzzy randomness pp. 218-234

Wolfgang Graf, Christian Jenkel, Stephan Pannier, Jan-Uwe Sickert and Frank Steinigen

A global optimisation method for computing interval hull solution for parametric linear systems pp. 235-245

Iwona Skalna and Andrzej Pownuk

Static analysis of uncertain structures using interval eigenvalue decomposition pp. 246-257

Mehdi Modares and Robert L. Mullen

On the statistics of oceanic waves pp. 258-266

Francesco Fedele

Reliability assessment using stochastic local regression pp. 267-285

Seung-Kyum Choi

The probability of type I and type II errors in imprecise hypothesis testing with an application to geodetic deformation analysis pp. 286-306

Ingo Neumann and Hansjorg Kutterer

Stress analysis of a singly reinforced concrete beam with uncertain structural parameters pp. 307-329

M.V. Rama Rao, Andrzej Pownuk and Iwona Skalna

Volume 2, issue 4, 2008

A comparison of statistical approaches for assessing reliability pp. 265-285

Jason Matthew Aughenbaugh and Jeffrey W. Herrmann

Efficient algorithm and discrete-event solver for stochastic flow networks with converging flows pp. 286-308

Michael T. Todinov

Probability bounds for series systems with variables constrained by sets of probability measures pp. 309-339

Thomas Fetz and Fulvio Tonon

Optimal reliability of power capacities in the phase of preparation and design pp. 340-356

Smajo Bisanovic and Hilmo Sehovic

System fatigue reliability modelling under stochastic cyclic load pp. 357-367

Liyang Xie, Zheng Wang and Wenqiang Lin

Volume 2, issue 3, 2008

A constrained quadratic spline as a model for the cumulative hazard function pp. 170-178

Vasiliy V. Krivtsov, Ilya V. Kolmanovsky and Timothy P. Davis

Modelling automotive warranty claims with build-to-sale data uncertainty pp. 179-189

Andre Kleyner and Keith Sanborn

Reliability assessment based on two-dimensional warranty data and an accelerated failure time model pp. 190-208

Jaiwook Baik and D.N. Prabhakar Murthy

Product warranty: modelling with 2D-renewal process pp. 209-220

Dinu Corbu, Stefanka Chukova and Jason O'Sullivan

Price-warranty length decision with Glickman-Berger model pp. 221-233

Dipak K. Manna

Modelling sales lag and reliability of an automobile component from warranty database pp. 234-247

Md. Rezaul Karim

Non-parametric hazard rate estimation of hard failures with known mileage accumulation rates in vehicle population pp. 248-263

Bharatendra K. Rai and Nanua Singh

Volume 2, issue 1/2, 2008

Data-driven calibration of power conductors thermal model for overhead lines overload protection pp. 5-18

Gianluca Bontempi, Alfredo Vaccaro and Domenico Villacci

Voltage security assessment and optimal load shedding of power system using the case-based reasoning approach pp. 19-35

N.P. Patidar and Jaydev Sharma

Fast voltage contingency analysis of power systems using model trees pp. 36-50

N.P. Patidar and Jaydev Sharma

Testing of complex IEC 61850 based substation automation systems pp. 51-63

Alexander Apostolov

Basic fault tree analysis for use in protection reliability pp. 64-78

Robert Beresh, John Ciufo and George Anders

Adequacy assessment of composite power generation and transmission systems with wind energy pp. 79-98

Roy Billinton and Yi Gao

Theoretical and practical aids for the proper selection of reliability models for power system components pp. 99-128

E. Chiodo and G. Mazzanti

Application of a semi-Markov model and a simulated annealing algorithm for the selection of an optimal maintenance policy for power equipment pp. 129-145

M. Stopczyk, B. Sakowicz and G.J. Anders

Strategies to meet grid challenges for safety and reliability pp. 146-165

V. Madani and R.L. King

Volume 1, issue 4, 2007

Evolution of reliability engineering discipline over the last six decades: a comprehensive review pp. 377-410

Sunil S. Bhamare, Om Prakash Yadav and Ajay Rathore

NARMAX neural modelling and detecting faults using the cumulative sum statistical test pp. 411-427

Yahya Chetouani

Reliability analysis of track circuit of Indian railway signalling system pp. 428-445

Subhash Chandra Panja and Pradip Kumar Ray

Prime implicants for modularised non-coherent fault trees using binary decision diagrams pp. 446-464

Rasa Remenyte-Prescott and John D. Andrews

Reliable computation of phase stability and equilibrium using interval methods pp. 465-488

Mark A. Stadtherr, Gang Xu, Gabriela I. Burgos-Solorzano and William D. Haynes

Risk-based reliability allocation and topological optimisation based on minimising the total cost pp. 489-512

M.T. Todinov

An interval computation approach for power components overload protection in the presence of data uncertainty pp. 513-531

Alfredo Vaccaro and Domenico Villacci

Volume 1, issue 3, 2007

Fast Fourier transform based system reliability analysis pp. 239-259

Phani R. Adduri and Ravi C. Penmetsa

Statistical approximations of vibration power flow for complex structures with uncertainties pp. 260-289

Soo-Yeol Lee, Matthew P. Castanier and Christophe Pierre

A methodology for strength and reliability analysis of carbon nanotube/nanofibre and conventional composite plates pp. 290-312

Srikanth Pilla and Aaron Hammitt

An integrated approach to analyse system behaviour using knowledge-based approximate reasoning methodologies pp. 313-338

Rajiv Kumar Sharma, Dinesh Kumar and Pradeep Kumar

Use of system interdependency to allocate component reliability pp. 339-359

Omkarprasad S. Vaidya and Sushil Kumar

System reliability allocation methodology based on three-dimensional analyses pp. 360-375

Om Prakash Yadav

Volume 1, issue 1/2, 2006

Finite element structural response sensitivity and reliability analyses using smooth versus non-smooth material constitutive models pp. 3-39

Michele Barbato and Joel P. Conte

Worst case deterministic feasibility and multiobjective robustness measures for engineering design optimisation pp. 40-58

Babak Besharati and Shapour Azarm

Performance-based earthquake engineering using structural optimisation tools pp. 59-76

Michalis Fragiadakis, Nikos D. Lagaros and Manolis Papadrakakis

Uncertain reliability index in finite element reliability analysis pp. 77-101

Smitha D. Koduru and Terje Haukaas

Adaptive reduction of random variables using global sensitivity in reliability-based optimisation pp. 102-119

Nam Ho Kim, Haoyu Wang and Nestor V. Queipo

Usage of meshfree methods in reliability analysis pp. 120-136

Artemis Kloess, Hui-Ping Wang and Mark E. Botkin

Efficient first-order reliability analysis of multidisciplinary systems pp. 137-154

Sankaran Mahadevan and Natasha Smith

Safety and reliability optimisation of captive power plants using intelligent maintenance scheduling pp. 155-167

Dusmanta Kumar Mohanta, Pradip Kumar Sadhu and R. Chakrabarti

Stochastic simulation of cracking in concrete structures using multiparameter random fields pp. 168-187

Thomas Most and Christian Bucher

Inverse reliability measures and reliability-based design optimisation pp. 187-205

Palaniappan Ramu, Xueyong Qu, Byeng Dong Youn, Raphael T. Haftka and Kyung K. Choi

A saddlepoint approximation based simulation method for uncertainty analysis pp. 206-224

Beiqing Huang, Xiaoping Du and Ramaprasad E. Lakshminarayana

Impact of uncertainty quantification on design: an engine optimisation case study pp. 225-237

Michael Kokkolaras, Zissimos P. Mourelatos and Panos Y. Papalambros