International Journal of Reliability and Safety

2006 - 2025

From Inderscience Enterprises Ltd
Bibliographic data for series maintained by Sarah Parker ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 13, issue 4, 2019

Reliability assessment and performance analysis of DFIG-based WT for wind energy conversion system pp. 235-266

Om Prakash Bharti, R.K. Saket and S.K. Nagar

Probabilistic evaluation and design aspects for reliability enhancement of induction motor pp. 267-290

Sanjay Kumar, K.S. Anand Kumar, Sachin Kumar, Om Prakash Bharti, Lokesh Varshney, R.K. Saket and D.N. Vishwakarma

Parametric selection of software reliability growth models using multi-criteria decision-making approach pp. 291-309

Rakesh Garg

On the mixture of flexible Weibull extension and Burr XII distributions pp. 310-334

Rania M. Kamal and Moshira A. Ismail

Volume 13, issue 3, 2019

Bearing health assessment based on Hilbert transform envelope analysis and cluster analysis pp. 151-165

Xin Zhang, Jianmin Zhao, Xianglong Ni, Haiping Li and Fucheng Sun

An optimal rejuvenation scheme for improving VoIP service reliability in the existence of resource exhaustion and security breaches pp. 166-178

Vandana Gupta and Rahul Kumar

Effort-based software release and testing stop time decisions pp. 179-193

Rana Majumdar, P.K. Kapur, Sunil K. Khatri and A.K. Shrivastava

A fuzzy-based failure mode effect and criticality analysis of solar photovoltaic systems pp. 194-210

Sana Perveen, Haroon Ashfaq and Mohammad Asjad

A TSST of the reliability function for exponential failure model using type II censored data with minimum cost of experimentations pp. 211-234

Zuhair A. Al-Hemyari and Alla K. Jiheel

Volume 13, issue 1/2, 2019

Topology optimisation design of mechanical tee backsheet pp. 5-17

Jinlong Wang and Junlong Chen

The probabilistic analysis of fatigue crack effect based on magnetic flux leakage pp. 18-30

M.I.M. Ahmad, A. Arifin, S. Abdullah, W.Z.W. Jusoh and S.S.K. Singh

Reliability assessment of pressure vessel design methods pp. 31-43

Hongjun Li, Peng Yang, Xun Huang and Hui Yang

Multi-state system reliability analysis methods based on Bayesian networks merging dynamic and fuzzy fault information pp. 44-60

Qin He, Ruijun Zhang, Tianyu Liu, Yabing Zha and Jie Liu

Reliability allocation technique for complex system of systems pp. 61-82

Antony Gratas Varuvel and Pratibha Xavier Pruno

New component-based reliability model to predict the reliability of component-based software pp. 83-95

Dimpal Tomar and Pradeep Tomar

Risk-energy aware service level agreement assessment for computing quickest path in computer networks pp. 96-124

Ashutosh Sharma and Rajiv Kumar

Emergency braking mechanism for an elevator using hydraulic and pneumatic actuation pp. 125-137

Nitin Rohatgi, Krutarth Mehta, Parijat Sarkar and T. Christo Michael

A hybrid fault tolerance framework for SaaS services based on hidden Markov model pp. 138-150

Feng Ye, Qian Huang, Zhijian Wang and Ling Li

Volume 12, issue 4, 2018

Availability optimisation of pre-heat exchanger system with random repair and failure rates using PSO pp. 327-347

Ajay Kumar

Performance assessment of repairable system in series configuration under different types of failure and repair policies using copula linguistics pp. 348-363

Monika Gahlot, V.V. Singh, Hamisu Ismial Ayagi and C.K. Goel

Model checking software product line based on multi-valued logic pp. 364-393

Shuang Liu, Yu-Feng Shi and Ming-Y Huang

Bayesian sample size determination for product retesting after design change in Poisson distributed data pp. 394-405

Swapnil D. Khorate and Digambar T. Shirke

State-control-limit-based rejuvenation modelling and optimisation of the virtualised cloud server pp. 406-428

Weichao Dang and Jianchao Zeng

Volume 12, issue 3, 2018

Random finite element method for bearing capacity assessment of a shallow foundation under varied uniaxial loadings pp. 237-260

Amal Hentati, Mbarka Selmi, Tarek Kormi and Nizar Bel Hadj Ali

Bayesian networks and probability boxes to model uncertainty in unavailability assessment pp. 261-278

Walid Mechri, Wassim Snene and Kamel Ben Othman

A prediction interval approach to developing life test acceptance criteria for progressively censored data pp. 279-291

Maram Salem, Zeinab Amin and Moshira Ismail

Reliability analysis of ((e, f), k, l c )/(m, n):F system under multiple failure using universal generating function pp. 292-305

K. Meenakshi and S.B. Singh

A fuzzy-QFD approach for the enhancement of work equipment safety: a case study in the agriculture sector pp. 306-326

Mario Fargnoli, Mara Lombardi and Nicolas Haber

Volume 12, issue 1/2, 2018

Uncertainty assessment in the results of inverse problems: applied to damage detection in masonry dams pp. 2-23

Long Nguyen-Tuan, Carsten Koenke, Volker Bettzieche and Tom Lahmer

Numerical simulation of wooden structures with polymorphic uncertainty in material properties pp. 24-45

Ferenc Leichsenring, Christian Jenkel, Wolfgang Graf and Michael Kaliske

Using statistical and interval-based approaches to propagate snow measurement uncertainty to structural reliability pp. 46-68

Árpád Rózsás and Miroslav Sýkora

Extrapolation of extreme traffic load effects on a cable-stayed bridge based on weigh-in-motion measurements pp. 69-85

Naiwei Lu, Yang Liu and Michael Beer

Solving the power allocation problem using methods with result verification pp. 86-102

Ekaterina Auer, César Benavente-Peces and Andreas Ahrens

Fatigue reliability evaluation of short-span concrete bridges under dynamic impacts of stochastic truck loading pp. 103-121

Yuan Luo, Donghaung Yan and Ming Yuan

Structural dynamic problems in time domain under uncertainty: an interval finite element approach pp. 122-146

Naijia Xiao, Francesco Fedele and Rafi L. Muhanna

Solution of uncertain linear systems of equations with probability-box parameters pp. 147-165

Naijia Xiao, Robert L. Mullen and Rafi L. Muhanna

Reliable power flow and short circuit analysis of systems with uncertain data pp. 166-186

Shashwati Ray and Shimpy Ralhan

A fuzzy surrogate modelling approach for real-time predictions in mechanised tunnelling pp. 187-217

Ba Trung Cao, Steffen Freitag and Günther Meschke

Equilibrium equations in interval models of structures pp. 218-235

Evgenija D. Popova

Volume 11, issue 1/2, 2017

Necessary and sufficient conditions for calculus of variations under interval uncertainty pp. 1-22

Mohammad Heidari and Mohadeseh Ramezanzadeh

Modelling composite performance variable of deteriorating systems using empirical evidence and artificial neural network pp. 23-49

P.A. Ozor, S.O. Onyegegbu and J.C. Agunwamba

Simulation of a non-stationary gamma wear process pp. 50-62

Anil Rana

Model validation based on random set theory pp. 63-77

Liang Zhao

Reliability analysis of Finometer and AGE-Reader devices in a clinical research trial pp. 78-96

Anna Deltsidou, Vasilios Zarikas, Dimos Mastrogiannis, Eleni Kapreli, Dimitrios Bourdas, Elpiniki Papageorgiou, Vasilios Raftopoulos, Maria Noula, Maria Lambadiari and Katerina Lykeridou

Reliability evaluation for wireless sensor network with clustering structure based on universal generating function pp. 97-115

Qiang Liu, Hailin Zhang, Wei Su and Yanbo Ma

Goodness-of-fit test for generalised renewal process pp. 116-131

Rajiv N. Rai and Garima Sharma

Reliability estimation of photovoltaic system using Markov process and dynamic programming approach pp. 132-151

Sonal Sindhu, Vijay Nehra and S.C. Malik

Volume 10, issue 3, 2016

The influence of measurement error on calculation of process capability indices and proportion of conformance pp. 195-209

Rui Miao, Yizhou Wu, Guoqing Sun, Xiyao Gu and Jie Zhang

Discrete dynamic cumulative residual entropy pp. 210-226

Mohammad Khorashadizadeh, A.H. Rezaei Roknabadi and G.R. Mohtashami Borzadaran

Optimisation of an emergency plan in gas distribution network operations with Bayesian networks pp. 227-242

Abdelaziz Lakehal and Zine Ghemari

An ANN-PSO-based model to predict fault-prone modules in software pp. 243-264

Manjubala Bisi and Neeraj Kumar Goyal

Autonomous robot performance evaluation with rework pp. 265-284

Nupur Goyal, Ayush Kumar Dua and Mangey Ram

Volume 10, issue 2, 2016

Mean maximum values of non-normal distributions for different time periods pp. 99-109

Seyed Hooman Ghasemi and Andrzej S. Nowak

Some reliability properties of the proportional hazard rate model with upside down bathtub shaped hazard rate pp. 110-124

M. Shafaei Noughabi, Abdol Hamid Rezaei Roknabadi and Golam Reze Mohtashami Borzadaran

Analytical hierarchy process based supplier selection methodology: a framework and application pp. 125-144

Dibyendu Das and Ankuran Saha

Time to failure estimation based on degradation model with random failure threshold pp. 145-157

Jie Chen, Cunbao Ma and Dong Song

Modelling uncertainty in runway safety intervention performance evaluation pp. 158-173

Olasunkanmi Oriola Akinyemi and Kazeem Adekunle Adebiyi

Empirical reliability requirements allocation method based on industrial data pp. 174-193

Amandine Gay, Rosario Toscano and Ioan Alexandru Ivan

Volume 10, issue 1, 2016

Multi-criteria failure mode effects and criticality analysis method: a comparative case study on aircraft braking system pp. 1-21

Yung-Tsan Jou, Kang-Hung Yang, Ming-Li Liao and Cheng-Shih Liaw

Graphical tools for generating qualitative redundant relations pp. 22-47

Rahma Smaili, Rafika El Harabi and Mohamed Naceur Abdelkrim

System reliability estimation and cost analysis of series-parallel systems in the presence of repair dependence function pp. 48-71

K.C. Siju and M. Kumar

System theory based hazard analysis applied to the process industry pp. 72-86

Manuel Rodríguez and Ismael Díaz

Analysis of a fatal electrical accident due to the contact of an overhead line conductor with a guy wire pp. 87-97

Despoina D. Dimitriadou, Constantinos D. Halevidis, Aikaterini D. Polykrati and Perikles D. Bourkas