International Journal of Low-Carbon Technologies

2006 - 2025

Current editor(s): Saffa B. Riffat

From Oxford University Press
Bibliographic data for series maintained by Oxford University Press ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

2020, volume 15, articles 1

Modeling and simulation of a small-scale solar-powered absorption cooling system in three cities with a tropical climate pp. 1-16

Andrea Boero and Francis Agyenim

Toward energy-efficient governmental buildings in Egypt: investigating the impact of nano aerogel glazing on energy performance pp. 17-24

Ibrahim Rizk Hegazy

Performance study of a dual-fluid photovoltaic thermal collector with reflection and refraction solar concentrators pp. 25-39

S S S Baljit, H Y Chan, S H Zaidi and K Sopian

Coordinated control strategy of DC microgrid with hybrid energy storage system to smooth power output fluctuation pp. 46-54

Tiezhou Wu, Fanchao Ye, Yuehong Su, Yubo Wang and Saffa Riffat

Aerodynamic and structural optimization of wind turbine blade with static aeroelastic effects pp. 55-64

Jie Zhu, Xiaohui Ni and Xiaomei Shen

Behavior of unconfined and CFRP confined rubberized concrete pp. 65-83

Rana Faisal Tufail, Xiong Feng and Muhammad Zahid

Ecological impact of watershed water pollution control on coastal tourist scenic spots pp. 84-88

Qiong Sun, Xiaofang Wang and Li Wang

Study on propagation characteristics of the secondary explosion of coal dust pp. 89-96

Baichao Song and Yucheng Li

Key aspects and feasibility assessment of a proposed wind farm in Jordan pp. 97-105

Mohammad Al-Addous, Motasem Saidan, Mathhar Bdour, Zakariya Dalala, Aiman Albatayneh and Christina B Class

Reconfigurable equilibrium circuit with additional power supply pp. 106-111

Yu Zhang, Mingming Huang, Tiezhou Wu and Feng Ji

Review on window-glazing technologies and future prospects pp. 112-120

Jorge Luis Aguilar-Santana, Hasila Jarimi, Mariana Velasco-Carrasco and Saffa Riffat

A comprehensive review on renewable and sustainable heating systems for poultry farming pp. 121-142

Yuanlong Cui, Elmer Theo, Tugba Gurler, Yuehong Su and Riffat Saffa

Determining the carbon footprint for a new earthen-based finish pp. 143-148

Yolanda G Aranda-Jimenez and Edgardo J Suarez-Dominguez

Optimization of Sludge Fermentation for Volatile Fatty Acids Production pp. 149-154

Sultan K Salamah and Andrew A Randall

2019, volume 14, articles 4

Review of Heat and Mass Transfer Enhancement Techniques and Current Advancement for Adsorption Heating/Cooling Systems pp. 461-467

Norhayati Mat Wajid, Blaise Mompuouo, Siddig Omer and Saffa B Riffat

Modeling thermal conductivity of Ag/water nanofluid by applying a mathematical correlation and artificial neural network pp. 468-474

Mahdi Ramezanizadeh and Mohammad Alhuyi Nazari

Efficient optimized design of solar power tower plants based on successive response surface methodology pp. 475-486

Yan Luo, Yue Hu and Tao Lu

Fault diagnosis of air-conditioning refrigeration system based on sparse autoencoder pp. 487-492

Zhiyi Wang, Jiachen Zhong, Jingfan Li and Cui Xia

Evaluation criteria of independent hybrid energy systems pp. 493-499

Tae Yong Jung, Donghun Kim, SeoKyung Lim and Jongwoo Moon

Experimental investigation and performance analysis of an Organic Rankine Cycle for low-temperature heat to electricity generation pp. 500-507

Lili Wei, Zhenjun Ma, Xuemei Gong and Xiujuan Guo

Analysis of energy efficiency improvement of high-tech fabrication plants pp. 508-515

Shih-Cheng Hu, Tee Lin, Ben-Ran Fu, Cheng-Kung Chang and I-Yun Cheng

Introducing the RZ model for definition and optimization of the boundary of low emission zones pp. 516-532

Shahab Kabiri, Mansour Hajihosseinlou and Shabnam Kabiri

Attaining sustainable high-rise office buildings in warm-summer-cold-winter climates: a case study on Frankfurt pp. 533-542

Yuanda Hong, Wu Deng, Collins I Ezeh and Zhen Peng

Assessment of strength development of cemented desert soil pp. 543-549

Talal S Amhadi and Gabriel J Assaf

Theoretical and experimental investigations of different area ratios of a supersonic ejector driven by compressed air pp. 550-560

Ahmed AL-nuaimi, Mark Worall and Saffa Riffat

A study on CO2 absorption using hybrid solvents in packed columns pp. 561-567

Ravinder Kumar, Mohammad Hossein Ahmadi, Dipen Kumar Rajak and Mohammad Alhuyi Nazari

The potential of phase change materials in mitigating cooling load of buildings in UAE pp. 568-575

Yasir Rashid, Mohammed Ziauddin, Bobby Mathew and Fadi Alnaimat

2019, volume 14, articles 1

Sensitivity analysis of technical and economic parameters for natural gas management in enhanced oil recovery projects pp. 1-9

Mojtaba Mirzaee, Mohammad Hossein Ahmadi, Emin Acıkkalp and Mohammad Rahimzadeh

Technical and economical evaluation of grid-connected renewable power generation system for a residential urban area pp. 10-22

Moslem Akbari Vakilabadi, Abolfazl Afzalabadi, Alireza Khoeini Poorfar, Alireza Rahbari, Mokhtar Bidi, Mohammad Hossein Ahmadi and Tingzhen Ming

Surrounding rock control of an innovative gob-side entry retaining with energy-absorbing supporting in deep mining pp. 23-35

Zhibiao Guo, Qiong Wang, Zhaohua Li, Manchao He, Zhibo Ma, Feixiang Zhong and Jie Hu

Parametric analysis on the performance of a revolutionary rotary Ericsson heat pump/engine pp. 36-43

Wenbin Zhang, Chris Benson, Andrew Cunningham and Saffa Riffat

Review on the recent progress of thermochemical materials and processes for solar thermal energy storage and industrial waste heat recovery pp. 44-69

Hasila Jarimi, Devrim Aydin, Zhang Yanan, Gorkem Ozankaya, Xiangjie Chen and Saffa Riffat

Development of a cooling load prediction model for air-conditioning system control of office buildings pp. 70-75

Chengliang Fan, Yundan Liao and Yunfei Ding

Low-cost automatic multi-axis solar tracking system for performance improvement in vertical support solar panels using Arduino board pp. 76-82

Timothy Laseinde and Dominic Ramere

Experimental study on the thermal performance of solar air conditioning system with MEPCM cooling storage pp. 83-88

Lin Zheng, Wei Zhang, Lingzhi Xie, Wei Wang, Hao Tian and Mo Chen

2018, volume 13, articles 4

Nanosilicon dioxide hydrosol as surfactant for preparation of microencapsulated phase change materials for thermal energy storage in buildings pp. 301-310

Weiguang Su, Jo Darkwa and Georgios Kokogiannakis

The place of small hydropower electrification scheme in socioeconomic stimulation of Nigeria pp. 311-319

W S Ebhota and P Y Tabakov

Medical and dental applications of renewable energy systems pp. 320-326

Yashar Haghighi Bardineh, Fatemeh Mohamadian, Mohammad Hossein Ahmadi and Nazila Akbarianrad

Free cooling using phase change material for buildings in hot-arid climate pp. 327-337

Rami Zeinelabdein, Siddig Omer, Elamin Mohamed and Guohui Gan

The impact of agricultural chemical inputs on environment: global evidence from informetrics analysis and visualization pp. 338-352

Lu Zhang, Chengxi Yan, Qing Guo, Junbiao Zhang and Jorge Ruiz-Menjivar

Comparison of the solar PV cooling system and other cooling systems pp. 353-363

Yuhe Gao, Jie Ji, Zewei Guo and Peng Su

The economic benefit of marine based on DEA model pp. 364-368

Jiangping Yu and Weiyang Yu

Design methodology of heat recovery steam generator in electric utility for waste heat recovery pp. 369-379

Awais Ahmed, Khaled Khodary Esmaeil, Mohammad A Irfan and Fahad A Al-Mufadi

Evaluation of the performance of hybrid CSP/biomass power plants pp. 380-387

João Soares, Armando C Oliveira, Simon Dieckmann, Dirk Krüger and Francesco Orioli

Thermo-economic analysis and multi-objective optimization of micro-CHP Stirling system for different climates of Iran pp. 388-403

Maryam Khoshbazan, Mohammad Hossein Ahmadi, Tingzhen Ming, Jamal Tabe Arjmand and Mohammad Rahimzadeh

Experimental investigation of a novel PVt/heat pump system for energy-efficient poultry houses pp. 404-413

Tugba Gurler, Theo Elmer, Yuanlong Cui, Siddig Omer and Saffa Riffat

Numerical investigation of flow and heat transfer in the sub-channel of an SCWR core with split-vanes pp. 414-423

Qinggang Qiu, Shuai Zhao, Xin Du, Xiaojing Zhu and Shengqiang Shen

A numerical investigation of liquid film flow and film thickness distribution outside a horizontal tube pp. 424-431

Xiaocui Zhang, Chuiju Meng, Qinggang Qiu, Shenglin Quan and Shengqiang Shen

An improved model to predict thermal runaway in concentrator III–V multi-junction solar cells pp. 432-437

Hui Lv, Wenjuan Huang, Chunfu Cheng, Yiwen Ou, Jun Liao, Yuehong Su and Saffa Riffat

Analysis of stakeholder roles and the challenges of solar energy utilization in Iran pp. 438-451

Mohammad Dehghani Madvar, Mohammad Alhuyi Nazari, Jamal Tabe Arjmand, Alireza Aslani, Roghayeh Ghasempour and Mohammad Hossein Ahmadi

2018, volume 13, articles 3

Performance of rock–soil slope reinforcement and protection effect in cutting slope construction pp. 193-197

Xiaofeng Luo, Guohui Xing and He Zhao

The planning and design of road network structure in urban railway transit hub areas pp. 198-203

Zhaoyang Cai and Jianwei Yan

Roof geometry as a factor of thermal behavior: simulation based study of using vaults and domes in the Middle East zone pp. 204-211

Wael Seddik Moustafa, Ibrahim Rizk Hegazy and Mohammed Moustafa Eldabousy

Optimization analyses on the performance of an auto-cascade absorption refrigeration system operating with mixed refrigerants pp. 212-217

Jinkun Zhou, Shengjian Le, Qin Wang and Dahong Li

Uniformity characteristic and calibration of simple low cost compact halogen solar simulator for indoor experiments pp. 218-230

Erkata Yandri

Online Energy Simulator for building fault detection and diagnostics using dynamic energy performance model pp. 231-239

Claudio Giovanni Mattera, Muhyiddine Jradi and Hamid Reza Shaker

Experimental performance comparison of adiabatic and internally-cooled membrane dehumidifiers pp. 240-249

Gurubalan Annadurai, Shaligram Tiwari and M P Maiya

The economic development incentive mechanism for the existing energy-saving building structure in the perspective of game analysis pp. 250-254

Yin Li and Mei Liang

Structural reconstruction design and performance simulation analysis of old buildings based on BIM pp. 255-259

A Lisha, Yixing Deng and Min Ren

Evaluation and control of thermal losses and solar fraction in a hot water solar system pp. 260-265

Paolo Valdiserri

Applying GMDH artificial neural network in modeling CO2 emissions in four nordic countries pp. 266-271

Mohammad Hossein Rezaei, Milad Sadeghzadeh, Mohammad Alhuyi Nazari, Mohammad Hossein Ahmadi and Fatemeh Razi Astaraei

Experimental study on improving stability of PCM and MEPCM slurry with different surfactants pp. 272-276

Zheng Lin, Zhang Wei, Lin Shuang and Jin Xiangyu

Interfacial heat and mass transfer analysis in solar-powered, packed-bed adiabatic liquid desiccant regeneration for air conditioning pp. 277-285

Andrew Y A Oyieke and Freddie L Inambao

Hybrid PCM—aluminium foams’ thermal storages: an experimental study pp. 286-291

Renato M Lazzarin, Simone Mancin, Marco Noro and Giulia Righetti

Energy distribution function based universal adsorption isotherm model for all types of isotherm pp. 292-297

Muhammad Burhan, Muhammad Wakil Shahzad and Kim Choon Ng

Corrigendum: Detailed design and optimization of a sustainable micro-algal biofuel process plant pp. 298-298

Andrew Eloka-Eboka, Chiemela Onunka and Freddie Inambao

Corrigendum: Materials characterization of innovative composite materials for solar-driven thermochemical heat storage (THS) suitable for building application pp. 299-299

Hasila Jarimi, Devrim Aydin, Yanan Zhang, Yate Ding, Omar Ramadan, Xiangjie Chen, Auwal Dodo, Zafer Utlu and Saffa Riffat

2018, volume 13, articles 2

Evaluating CHP management and outputs using simple operational data pp. 109-115

Sam Paine, Patrick James and AbuBakr Bahaj

Daylighting performance in UAE traditional buildings used as museums pp. 116-121

Khaled A Al-Sallal, Amira R AbouElhamd and Maitha Bin Dalmouk

Detailed design and optimization of a sustainable micro-algal biofuel process plant pp. 122-130

Andrew Eloka-Eboka, Chiemela Onunka and Freddie Inambao

What do consumers expect for government subsidies on low-carbon products in China? pp. 131-139

Jing Shuai, Xin Cheng, Jing Liu and Jinhua Cheng

Modeling and optimum design of an off-grid PV/WT/FC/diesel hybrid system considering different fuel prices pp. 140-147

Akbar Maleki

Indoor air quality investigation of a university library based on field measurement and questionnaire survey pp. 148-160

Yanpeng Wu, Yuming Lu and Ding-Chin Chou

Dual source heat pump, a high efficiency and cost-effective alternative for heating, cooling and DHW production pp. 161-176

José M Corberán, Antonio Cazorla-Marín, Javier Marchante-Avellaneda and Carla Montagud

Performance testing of a heat pipe PV/T heat pump system under different working modes pp. 177-183

Hongbing Chen, Haoyu Niu, Lei Zhang, Yaxuan Xiong, Huixing Zhai and Jinzhe Nie

Study on energy-saving design and operation of hospital purification air conditioning system pp. 184-190

Yunyu Chen

Corrigendum: Materials characterization of innovative composite materials for solar-driven thermochemical heat storage (THS) suitable for building application pp. 191-191

Hasila Jarimi, Devrim Aydin, Yanan Zhang, Yate Ding, Omar Ramadan, Xiangjie Chen, Auwal Dodo, Zafer Utlu and Saffa Riffat

Corrigendum: Indoor air quality investigation of a university library based on field measurement and questionnaire survey pp. 192-192

Yanpeng Wu, Yuming Lu and Ding-Chin Chou

2018, volume 13, articles 1

A novel flue gas heat recovery system based on low-pressure regeneration liquid desiccant cycle pp. 1-5

Xiaoyue Zhang, Zhenying Wang and Zhen Li

Experimental analysis of an innovative tile covering for ventilated pitched roofs pp. 6-14

Michele Bottarelli, Marco Bortoloni and Giuseppe Dino

Calculating the lighting performance gap in higher education classrooms pp. 15-22

Katharine van Someren, Phil Beaman and Li Shao

An investigation into the energy performance gap between the predicted and measured output of photovoltaic systems using dynamic simulation modelling software—a case study pp. 23-29

Shaun Harrison and Liben Jiang

Materials characterization of innovative composite materials for solar-driven thermochemical heat storage (THS) suitable for building application pp. 30-42

Hasila Jarimi, Aydin Devrim, Yanan Zhang, Yate Ding, Omar Ramadan, Xiangjie Chen, Auwal Dodo, Zafer Utlu and Saffa Riffat

The impact of architectural spaces’ geometric forms and construction materials on the users’ brainwaves and consciousness status pp. 43-51

Eslam Elbaiuomy, Ibrahim Hegazy and Sherif Sheta

Thermodynamic analysis of thermophotovoltaic systems used in waste heat recovery systems: an application pp. 52-60

Zafer Utlu and Büşra Selenay Önal

Preliminary study on the effect of dry/wet cooling combinations for the sustainable management of water of cooling tower pp. 61-66

Gilbong Lee, Ho-Sang Ra, Beomjoon Lee, Young-Soo Lee, Chul Woo Roh, Young-Jin Baik, Junhyun Cho and Hyungki Shin

Microstructure and filtration performance of konjac glucomannan-based aerogels strengthened by wheat straw pp. 67-75

Yixin Wang, Xi Chen, Ying Kuang, Man Xiao, Yuehong Su and Fatang Jiang

Hybrid PhotoVoltaic–Thermal heat pump systems: energy and economic performance evaluations in different climates pp. 76-83

Marco Noro and Renato M Lazzarin

Energy conservation and thermal environment analysis of room air conditioner with intermittent supply airflow pp. 84-91

Yunqing Fan, Masaki Toyoshima and Makoto Saito

Performance investigation of linear evacuated absorber of 2-stage solar Linear Fresnel Reflector module under non-uniform flux distribution pp. 92-101

Balaji Shanmugapriya, K S Reddy and T Sundarajan

Study on the impact of blades wrap angle on the performance of pumps as turbines used in water supply system of high-rise buildings pp. 102-108

Jiyun Du, Hongxing Yang and Zhicheng Shen