Journal of Intelligent Manufacturing

2009 - 2025

Current editor(s): Andrew Kusiak

From Springer
Bibliographic data for series maintained by Sonal Shukla () and Springer Nature Abstracting and Indexing ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 27, issue 6, 2016

Robust optimization of supply chain network design in fuzzy decision system pp. 1131-1149

Xuejie Bai and Yankui Liu

Optimization of preventive maintenance for a multi-state degraded system by monitoring component performance pp. 1151-1170

Chao-Hui Huang and Chun-Ho Wang

A particle swarm approach for multi-objective optimization of electrical discharge machining process pp. 1171-1190

Chinmaya P. Mohanty, Siba Sankar Mahapatra and Manas Ranjan Singh

Integration of fuzzy neural network and artificial immune system-based back-propagation neural network for sales forecasting using qualitative and quantitative data pp. 1191-1207

R. J. Kuo, Y. S. Tseng and Zhen-Yao Chen

A metaheuristic for fast machining error compensation pp. 1209-1220

Roman Stryczek

Target coverage in camera networks for manufacturing workplaces pp. 1221-1235

Samer Hanoun, Asim Bhatti, Doug Creighton, Saeid Nahavandi, Phillip Crothers and Celeste Gloria Esparza

Designing flexible service systems: application to machine tools pp. 1237-1259

Pankaj U. Zine, Makarand S. Kulkarni, Arun K. Ray and Rakesh Chawla

Using a diffusion wavelet neural network for short-term time series learning in the wafer level chip scale package process pp. 1261-1272

Li Der-Chiang, Chun-Wu Yeh, Chieh-Chih Chen and Hung-Ta Shih

Motor fault detection and diagnosis using a hybrid FMM-CART model with online learning pp. 1273-1285

Manjeevan Seera, Chee Peng Lim and Chu Kiong Loo

A method for aligning serial batching decisions in a two-level organization of factory and distributed workstations pp. 1287-1297

Yon-Chun Chou, Yue-Lan Lin and King-Fai Chun

Adaptive neuro fuzzy based hybrid force/position control for an industrial robot manipulator pp. 1299-1308

Himanshu Chaudhary, Vikas Panwar, Rajendra Prasad and N. Sukavanam

Risk analysis for the supplier selection problem using failure modes and effects analysis (FMEA) pp. 1309-1321

Simon Li and Wei Zeng

An economic production quantity model for a deteriorating system integrated with predictive maintenance strategy pp. 1323-1333

Da Wen, Pan Ershun, Wang Ying and Liao Wenzhu

Simulation-based optimization of sampling plans to reduce inspections while mastering the risk exposure in semiconductor manufacturing pp. 1335-1349

M’hammed Sahnoun, Belgacem Bettayeb, Samuel-Jean Bassetto and Michel Tollenaere

Volume 27, issue 5, 2016

Automatic optical inspection system for IC molding surface pp. 915-926

Ssu-Han Chen and Der-Baau Perng

Parameter optimization of advanced machining processes using cuckoo optimization algorithm and hoopoe heuristic pp. 927-942

Mohamed Arezki Mellal and Edward J. Williams

Remaining useful life prediction using prognostic methodology based on logical analysis of data and Kaplan–Meier estimation pp. 943-958

Ahmed Ragab, Mohamed-Salah Ouali, Soumaya Yacout and Hany Osman

A roadmap for implementing new manufacturing technology based on STEP-NC pp. 959-973

Jae-Min Cha, Suk-Hwan Suh, Jean-Yves Hascoet and Ian Stroud

Hybrid knowledge model of process planning and its green extension pp. 975-990

Qi Lei, Hong Wang and Yuchuan Song

An integrated approach to concept evaluation in a new product development pp. 991-1005

Zeki Ayağ

Integrating correspondence analysis with Grey relational model to implement a user-driven STP product strategy for smart glasses pp. 1007-1016

Chih-Hsuan Wang

Joint optimization of production planning and supplier selection incorporating customer flexibility: an improved genetic approach pp. 1017-1035

L. X. Cui

Data-driven prognostic method based on Bayesian approaches for direct remaining useful life prediction pp. 1037-1048

A. Mosallam, K. Medjaher and N. Zerhouni

Developing a multi-objective genetic optimisation approach for an operational design of a manual mixed-model assembly line with walking workers pp. 1049-1065

Atiya Al-Zuheri, Lee Luong and Ke Xing

Distributed production planning based on ATC and MOILP considering different coordination patterns pp. 1067-1084

Jieguang He, Xin Chen, Xindu Chen and Qiang Liu

An interoperable adaptive scheduling strategy for knowledgeable manufacturing based on SMGWQ-learning pp. 1085-1095

Hao-Xiang Wang and Hong-Sen Yan

Task allocation optimization in collaborative customized product development based on double-population adaptive genetic algorithm pp. 1097-1110

Beifang Bao, Yu Yang, Qian Chen, Aijun Liu and Jiali Zhao

A divide-and-conquer-method for the synthesis of liveness enforcing supervisors for flexible manufacturing systems pp. 1111-1129

Murat Uzam, ZhiWu Li, Gökhan Gelen and Rabiu Saleh Zakariyya

Volume 27, issue 4, 2016

Business process modelling challenges and solutions: a literature review pp. 701-723

Youseef Alotaibi

A multi-objective TLBO algorithm for balancing two-sided assembly line with multiple constraints pp. 725-739

Dashuang Li, Chaoyong Zhang, Xinyu Shao and Wenwen Lin

A method for a robust optimization of joint product and supply chain design pp. 741-749

Bertrand Baud-Lavigne, Samuel Bassetto and Bruno Agard

Continuous prediction of manufacturing performance throughout the production lifecycle pp. 751-763

Sholom M. Weiss, Amit Dhurandhar, Robert J. Baseman, Brian F. White, Ronald Logan, Jonathan K. Winslow and Daniel Poindexter

A generalized-exponential decomposition method for the analysis of inhomogeneous assembly/disassembly systems with unreliable machines and finite buffers pp. 765-779

Beixin Xia, Binghai Zhou, Ci Chen and Lifeng Xi

The rough set based approach to generic routing problems: case of reverse logistics supplier selection pp. 781-795

Chun-Che Huang, Wen-Yau Liang, Tzu-Liang Tseng and Ping-Houa Chen

Glowworm swarm optimization (GSO) for optimization of machining parameters pp. 797-804

Nurezayana Zainal, Azlan Mohd Zain, Nor Haizan Mohamed Radzi and Muhamad Razib Othman

Risk evaluation in failure mode and effects analysis using fuzzy digraph and matrix approach pp. 805-816

Hu-Chen Liu, Yi-Zeng Chen, Jian-Xin You and Hui Li

Micro-milling performance of AISI 304 stainless steel using Taguchi method and fuzzy logic modelling pp. 817-830

Emel Kuram and Babur Ozcelik

An improved teaching-learning-based optimization algorithm for numerical and engineering optimization problems pp. 831-843

Kunjie Yu, Xin Wang and Zhenlei Wang

Simultaneous monitoring of mean vector and covariance matrix shifts in bivariate manufacturing processes using hybrid ensemble learning-based model pp. 845-874

Wen-An Yang

Two-echelon fuzzy stochastic supply chain for the manufacturer–buyer integrated production–inventory system pp. 875-888

Ravi Shankar Kumar, M. K. Tiwari and A. Goswami

An intelligent approach to supplier evaluation in automotive sector pp. 889-903

Zeki Ayağ and Funda Samanlioglu

The knowledge modeling system of ready-mixed concrete enterprise and artificial intelligence with ANN-GA for manufacturing production pp. 905-914

Jia-Bei Yu, Yang Yu, Lin-Na Wang, Ze Yuan and Xu Ji

Volume 27, issue 3, 2016

An application of Hebbian learning in the design process decision-making pp. 487-506

Alberto Comesaña-Campos and José Benito Bouza-Rodríguez

Real-time simulation of neural network classifications from characteristics emitted by acoustic emission during horizontal single grit scratch tests pp. 507-523

James Griffin and Xun Chen

A quantitative estimation technique for welding quality using local mean decomposition and support vector machine pp. 525-533

Kuanfang He and Xuejun Li

A weighted-coupled network-based quality control method for improving key features in product manufacturing process pp. 535-548

Guangzhou Diao, Liping Zhao and Yiyong Yao

Statistical modeling and optimization of resistance spot welding process parameters using neural networks and multi-objective genetic algorithm pp. 549-559

Hamed Pashazadeh, Yousof Gheisari and Mohsen Hamedi

Process analytics formalism for decision guidance in sustainable manufacturing pp. 561-580

Alexander Brodsky, Guodong Shao and Frank Riddick

The preparation of organic light-emitting diode encapsulation barrier layer by low-temperature plasma-enhanced chemical vapor deposition: a study on the $$\hbox {SiO}_\mathrm{x}\hbox {N}_\mathrm{y}$$ SiO x N y film parameter optimization pp. 581-593

Chung-Feng Jeffrey Kuo, Wei-Lun Lan, Yu-Cheng Chang and Kun-Wei Lin

Machining activity extraction and energy attributes inheritance method to support intelligent energy estimation of machining process pp. 595-616

Shun Jia, Renzhong Tang and Jingxiang Lv

Decision-making in the manufacturing environment using a value-risk graph pp. 617-630

L. A. Shah, A. Etienne, A. Siadat and F. Vernadat

Multiobjective optimization of torch brazing process by a hybrid of fuzzy logic and multiobjective artificial bee colony algorithm pp. 631-638

Alejandro Alvarado-Iniesta, Jorge L. García-Alcaraz, Manuel Piña-Monarrez and Luis Pérez-Domínguez

Automated thermal fuse inspection using machine vision and artificial neural networks pp. 639-651

Te-Hsiu Sun, Fang-Cheng Tien, Fang-Chih Tien and Ren-Jieh Kuo

A multi-stage control chart pattern recognition scheme based on independent component analysis and support vector machine pp. 653-664

Ling-Jing Kao, Tian-Shyug Lee and Chi-Jie Lu

Improved prediction of stability lobes in milling process using time series analysis pp. 665-677

M. Pour and M. A. Torabizadeh

Branch-and-bound and PSO algorithms for no-wait job shop scheduling pp. 679-688

Abdelhakim AitZai, Brahim Benmedjdoub and Mourad Boudhar

An intelligent neural-fuzzy model for an in-process surface roughness monitoring system in end milling operations pp. 689-700

PoTsang B. Huang

Volume 27, issue 2, 2016

An ACO-based intercell scheduling approach for job shop cells with multiple single processing machines and one batch processing machine pp. 283-296

Dongni Li, Xianwen Meng, Miao Li and Yunna Tian

A constraint programming model for the scheduling of JIT cross-docking systems with preemption pp. 297-313

M. H. Fazel Zarandi, H. Khorshidian and M. Akbarpour Shirazi

A novel framework to evaluate programmable logic controllers: a fuzzy MCDM perspective pp. 315-324

Chih-Hsuan Wang and Hui-Shan Wu

Multi-agent reinforcement learning based maintenance policy for a resource constrained flow line system pp. 325-333

Xiao Wang, Hongwei Wang and Chao Qi

Intelligent maintenance prediction system for LED wafer testing machine pp. 335-342

Chien-Chang Hsu and Min-Sheng Chen

Prediction of drill flank wear using ensemble of co-evolutionary particle swarm optimization based-selective neural network ensembles pp. 343-361

Wen-An Yang, Wei Zhou, Wenhe Liao and Yu Guo

Discrete harmony search algorithm for flexible job shop scheduling problem with multiple objectives pp. 363-374

K. Z. Gao, P. N. Suganthan, Q. K. Pan, T. J. Chua, T. X. Cai and C. S. Chong

Evolutionary resource assignment for workload-based production scheduling pp. 375-388

Ilkyeong Moon, Sanghyup Lee, Moonsoo Shin and Kwangyeol Ryu

An ACO-based online routing method for multiple order pickers with congestion consideration in warehouse pp. 389-408

Fangyu Chen, Hongwei Wang, Yong Xie and Chao Qi

A Newton-based heuristic algorithm for multi-objective flexible job-shop scheduling problem pp. 409-416

Miguel A. Fernández Pérez and Fernanda M. P. Raupp

A hybrid cuckoo search-genetic algorithm for hole-making sequence optimization pp. 417-429

W. C. E. Lim, G. Kanagaraj and S. G. Ponnambalam

An efficient method for defect detection during the manufacturing of web materials pp. 431-445

Francisco G. Bulnes, Ruben Usamentiaga, Daniel F. Garcia and J. Molleda

Shop-floor resource virtualization layer with private cloud support pp. 447-462

Octavian Morariu, Cristina Morariu and Theodor Borangiu

Modeling, analysis and multi-objective optimization of twist extrusion process using predictive models and meta-heuristic approaches, based on finite element results pp. 463-473

Hamed Bakhtiari, Mahdi Karimi and Sina Rezazadeh

Identifying and evaluating enterprise architecture risks using FMEA and fuzzy VIKOR pp. 475-486

Hossein Safari, Zahra Faraji and Setareh Majidian

Volume 27, issue 1, 2016

Novel strategies for global manufacturing systems interoperability pp. 1-9

Ricardo Jardim-Goncalves, Antonio Grilo and Keith Popplewell

A federated approach to develop enterprise interoperability pp. 11-31

Zhiying Tu, Greg Zacharewicz and David Chen

Towards the development of interoperable sensing systems for the future enterprise pp. 33-54

M. A. Moisescu and I. S. Sacala

Towards the development of the framework for inter sensing enterprise architecture pp. 55-72

Alix Vargas, Llanos Cuenca, Andrés Boza, Ioan Sacala and Mihnea Moisescu

Web-service based architecture to support SCM context-awareness and interoperability pp. 73-82

Cristian Danila, Georgiana Stegaru, Aurelian Mihai Stanescu and Cristina Serbanescu

The ALTER-NATIVA knowledge management approach pp. 83-99

Joao Sarraipa, Catarina Marques-Lucena, Silvia Baldiris, Ramón Fabregat and Silvana Aciar

Managing corporate memory on the semantic web pp. 101-118

Nitesh Khilwani and J. A. Harding

A cloud-based platform to ensure interoperability in aerospace industry pp. 119-129

Malik Khalfallah, Nicolas Figay, Catarina Ferreira Da Silva and Parisa Ghodous

A self-adaptation scheme for workflow management in multi-agent systems pp. 131-148

Fu-Shiung Hsieh and Jim-Bon Lin

SysPEM: Toward a consistent and unified system process engineering metamodel pp. 149-166

Abdeslam Jakjoud, Maria Zrikem, Claude Baron and Abderrahmane Ayadi

Data type definition and handling for supporting interoperability across organizational borders pp. 167-185

Dávid Karnok, Zsolt Kemény, Elisabeth Ilie-Zudor and László Monostori

QoS ontology for service selection and reuse pp. 187-199

Sophea Chhun, Néjib Moalla and Yacine Ouzrout

Service-based negotiation for advanced collaboration in enterprise networks pp. 201-216

Carlos Coutinho, Adina Cretan, Catarina Ferreira Silva, Parisa Ghodous and Ricardo Jardim-Goncalves

A method to select a successful interoperability solution through a simulation approach pp. 217-229

François Galasso, Yves Ducq, Matthieu Lauras, Didier Gourc and Mamadou Camara

A survey of multi-factory scheduling pp. 231-249

J. Behnamian and S. M. T. Fatemi Ghomi

Interoperability requirements for automated manufacturing systems in construction pp. 251-262

Andrej Tibaut, Danijel Rebolj and Matjaž Nekrep Perc

Facilitating knowledge sharing and reuse in building and construction domain: an ontology-based approach pp. 263-282

Ruben Costa, Celson Lima, João Sarraipa and Ricardo Jardim-Gonçalves