Journal of Intelligent Manufacturing

2009 - 2025

Current editor(s): Andrew Kusiak

From Springer
Bibliographic data for series maintained by Sonal Shukla () and Springer Nature Abstracting and Indexing ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 29, issue 8, 2018

A comparison of machine learning methods for cutting parameters prediction in high speed turning process pp. 1683-1693

Zoran Jurkovic, Goran Cukor, Miran Brezocnik and Tomislav Brajkovic

Capacity planning with ant colony optimization for TFT-LCD array manufacturing pp. 1695-1713

James C. Chen, Tzu-Li Chen, Bayu Rezki Pratama and Qian-Fang Tu

Multi-objective optimization of machining and micro-machining processes using non-dominated sorting teaching–learning-based optimization algorithm pp. 1715-1737

R. Venkata Rao, Dhiraj P. Rai and J. Balic

A sensor fusion and support vector machine based approach for recognition of complex machining conditions pp. 1739-1752

Changqing Liu, Yingguang Li, Guanyan Zhou and Weiming Shen

The (p, q, r, l) model for stochastic demand under Intuitionistic fuzzy aggregation with Bonferroni mean pp. 1753-1771

Sujit Kumar De and Shib Sankar Sana

A hybrid approach using genetic and fruit fly optimization algorithms for QoS-aware cloud service composition pp. 1773-1792

Fateh Seghir and Abdellah Khababa

RETRACTED ARTICLE: Potential of soft computing approach for evaluating the factors affecting the capacity of steel–concrete composite beam pp. 1793-1801

Ali Toghroli, Meldi Suhatril, Zainah Ibrahim, Maryam Safa, Mahdi Shariati and Shahaboddin Shamshirband

Risk measurement and prioritization of auto parts manufacturing processes based on process failure analysis, interval data envelopment analysis and grey relational analysis pp. 1803-1825

Majid Baghery, Samuel Yousefi and Mustafa Jahangoshai Rezaee

A new method of reusing the manufacturing information for the slightly changed 3D CAD model pp. 1827-1844

Jinfeng Liu, Xiaojun Liu, Zhonghua Ni and Honggen Zhou

A heuristic optimization algorithm for HMM based on SA and EM in machinery diagnosis pp. 1845-1857

Wenzhu Liao, Dan Li and Shihao Cui

A novel inverted fuzzy decoupling scheme for MIMO systems with disturbance: a case study of binary distillation column pp. 1859-1871

Mohamed Hamdy, Abdalhady Ramadan and Belal Abozalam

Tool wear monitoring and prognostics challenges: a comparison of connectionist methods toward an adaptive ensemble model pp. 1873-1890

Kamran Javed, Rafael Gouriveau, Xiang Li and Noureddine Zerhouni

On-line fault diagnosis of FMS based on flows analysis pp. 1891-1904

Olfa Fakhfakh, Armand Toguyeni and Ouajdi Korbaa

An ACO-based hyperheuristic with dynamic decision blocks for intercell scheduling pp. 1905-1921

Yunna Tian, Dongni Li, Pengyu Zhou, Rongtao Guo and Zhaohe Liu

Automatic microstructural characterization and classification using probabilistic neural network on ultrasound signals pp. 1923-1940

Masoud Vejdannik and Ali Sadr

Modeling preventive maintenance of manufacturing processes with probabilistic Boolean networks with interventions pp. 1941-1952

Pedro J. Rivera Torres, Eileen I. Serrano Mercado, Orestes Llanes Santiago and Luis Anido Rifón

Erratum to: Modeling preventive maintenance of manufacturing processes with probabilistic Boolean networks with interventions pp. 1953-1953

Pedro J. Rivera Torres, Eileen I. Serrano Mercado, Orestes Llanes Santiago and Luis Anido Rifón

Volume 29, issue 7, 2018

Optimization of laser brazing onto galvanized steel based on ensemble of metamodels pp. 1417-1431

Qi Zhou, Youmin Rong, Xinyu Shao, Ping Jiang, Zhongmei Gao and Longchao Cao

An integrated approach to machine selection problem using fuzzy SMART-fuzzy weighted axiomatic design pp. 1433-1445

Süleyman Çakır

Location and transportation planning in supply chains under uncertainty and congestion by using an improved electromagnetism-like algorithm pp. 1447-1464

Mohammad Fathian, Javid Jouzdani, Mehdi Heydari and Ahmad Makui

A dual-channel network design model in a green supply chain considering pricing and transportation mode choice pp. 1465-1483

Farnaz Barzinpour and Peyman Taki

Manifold learning based rescheduling decision mechanism for recessive disturbances in RFID-driven job shops pp. 1485-1500

Chuang Wang and Pingyu Jiang

A multivariate process monitoring strategy and control concept for a small-scale fermenter in a PAT environment pp. 1501-1514

Maximilian O. Besenhard, Otto Scheibelhofer, Kjell François, Martin Joksch and Barbara Kavsek

An EPQ model with promotional demand in random planning horizon: population varying genetic algorithm approach pp. 1515-1531

A. K. Manna, B. Das, J. K. Dey and S. K. Mondal

Modeling and optimization of tool vibration and surface roughness in boring of steel using RSM, ANN and SVM pp. 1533-1543

K. Venkata Rao and P. B. G. S. N. Murthy

Implementation and comparison of algorithms for multi-objective optimization based on genetic algorithms applied to the management of an automated warehouse pp. 1545-1557

Gianluca Nastasi, Valentina Colla, Silvia Cateni and Simone Campigli

Engineering design optimization using an improved local search based epsilon differential evolution algorithm pp. 1559-1580

Wenchao Yi, Yinzhi Zhou, Liang Gao, Xinyu Li and Chunjiang Zhang

A reactive mitigation approach for managing supply disruption in a three-tier supply chain pp. 1581-1597

Sanjoy Kumar Paul, Ruhul Sarker and Daryl Essam

ANN modelling and Elitist teaching learning approach for multi-objective optimization of $$\upmu $$ μ -EDM pp. 1599-1616

Kalipada Maity and Himanshu Mishra

A multi-objective car sequencing problem on two-sided assembly lines pp. 1617-1636

Parames Chutima and Sathaporn Olarnviwatchai

Experimental study of seeding in genetic algorithms with non-binary genetic representation pp. 1637-1646

Sadegh Mirshekarian and Gürsel A. Süer

Branch pipe routing based on 3D connection graph and concurrent ant colony optimization algorithm pp. 1647-1657

Yanfeng Qu, Dan Jiang and Qingyan Yang

BIOSOARM: a bio-inspired self-organising architecture for manufacturing cyber-physical shopfloors pp. 1659-1682

João Dias-Ferreira, Luis Ribeiro, Hakan Akillioglu, Pedro Neves and Mauro Onori

Volume 29, issue 6, 2018

The prediction of profile deviations from multi process machining of complex geometrical features using combined evolutionary and neural network algorithms with embedded simulation pp. 1171-1189

James M. Griffin

Laser power based surface characteristics models for 3-D printing process pp. 1191-1202

A. Garg, Jasmine Siu Lee Lam and M. M. Savalani

Task recognition from joint tracking data in an operational manufacturing cell pp. 1203-1217

Don J. Rude, Stephen Adams and Peter A. Beling

An uncertain mathematical model to maximize profit of the defective goods supply chain by selecting appropriate suppliers pp. 1219-1234

Salah Alden Ghasimi, Rizauddin Ramli, Nizaroyani Saibani and Khashayar Danesh Narooei

Automatic assembly simulation of product in virtual environment based on interaction feature pair pp. 1235-1256

Jie Zhang, Pan Wang, Mi Zuo, Yuan Li and Zhijia Xu

Spur bevel gearbox fault diagnosis using wavelet packet transform and rough set theory pp. 1257-1271

Wentao Huang, Fanzhao Kong and Xuezeng Zhao

Multi-objective optimization of electronic product goods location assignment in stereoscopic warehouse based on adaptive genetic algorithm pp. 1273-1285

Bo Yan, Chang Yan, Feng Long and Xing-Chao Tan

Modeling and optimization of manufacturing process performance using Modelica graphical representation and process analytics formalism pp. 1287-1301

G. Shao, A. Brodsky and R. Miller

Review, analysis and synthesis of prognostic-based decision support methods for condition based maintenance pp. 1303-1316

Alexandros Bousdekis, Babis Magoutas, Dimitris Apostolou and Gregoris Mentzas

Cyber physical process monitoring systems pp. 1317-1328

Jeff Morgan and Garret E. O’Donnell

Rule and branch-and-bound algorithm based sequencing of machining features for process planning of complex parts pp. 1329-1336

Wei Wang, Yingguang Li and Lingling Huang

An effective discrete invasive weed optimization algorithm for lot-streaming flowshop scheduling problems pp. 1337-1349

Hong-Yan Sang, Quan-Ke Pan, Pei-Yong Duan and Jun-Qing Li

Data mining based multi-level aggregate service planning for cloud manufacturing pp. 1351-1361

Chunyang Yu, Wei Zhang, Xun Xu, Yangjian Ji and Shiqiang Yu

Application of Petri nets to deadlock avoidance in iPad-like manufacturing systems pp. 1363-1378

Victor R. L. Shen, Cheng-Ying Yang, Rong-Kuan Shen and Yu-Chia Chen

An approach to support SMEs in manufacturing knowledge organization pp. 1379-1392

Giulia Bruno, Teresa Taurino and Agostino Villa

Probabilistic Boolean network modeling and model checking as an approach for DFMEA for manufacturing systems pp. 1393-1413

Pedro J. Rivera Torres, Eileen I. Serrano Mercado and Luis Anido Rifón

Erratum to: Probabilistic Boolean network modeling and model checking as an approach for DFMEA for manufacturing systems pp. 1415-1415

Pedro J. Rivera Torres, Eileen I. Serrano Mercado and Luis Anido Rifón

Volume 29, issue 5, 2018

Single machine interfering jobs problem with flowtime objective pp. 953-972

Paz Perez-Gonzalez and Jose M. Framinan

A bi-objective genetic algorithm for intelligent rehabilitation scheduling considering therapy precedence constraints pp. 973-988

Lizhong Zhao, Chen-Fu Chien and Mitsuo Gen

The dominance-based rough set approach to cylindrical plunge grinding process diagnosis pp. 989-1004

Pawel Lezanski and Maria Pilacinska

An ontology supported risk assessment approach for the intelligent configuration of supply networks pp. 1005-1030

Claire Palmer, Esmond N. Urwin, Ali Niknejad, Dobrila Petrovic, Keith Popplewell and Robert I. M. Young

Reconfiguration point decision method based on dynamic complexity for reconfigurable manufacturing system (RMS) pp. 1031-1043

Sihan Huang, Guoxin Wang, Xiwen Shang and Yan Yan

Artificial intelligence for automatic prediction of required surface roughness by monitoring wear on face mill teeth pp. 1045-1061

D. Yu. Pimenov, A. Bustillo and T. Mikolajczyk

An efficient chaotic based PSO for earliness/tardiness optimization in a batch processing flow shop scheduling problem pp. 1063-1081

Hadi Mokhtari and Amir Noroozi

A Petri net-based particle swarm optimization approach for scheduling deadlock-prone flexible manufacturing systems pp. 1083-1096

Libin Han, Keyi Xing, Xiao Chen and Fuli Xiong

Intelligent information sharing among manufacturers in supply networks: supplier selection case pp. 1097-1113

Hyesung Seok and Shimon Y. Nof

Contribution of angular measurements to intelligent gear faults diagnosis pp. 1115-1131

Semchedine Fedala, Didier Rémond, Rabah Zegadi and Ahmed Felkaoui

Enhanced shuffled frog-leaping algorithm for solving numerical function optimization problems pp. 1133-1153

Chao Liu, Peifeng Niu, Guoqiang Li, Yunpeng Ma, Weiping Zhang and Ke Chen

Modeling truck scheduling problem at a cross-dock facility through a bi-objective bi-level optimization approach pp. 1155-1170

Fateme Heidari, Seyed Hessameddin Zegordi and Reza Tavakkoli-Moghaddam

Volume 29, issue 4, 2018

A hybrid PSO/SA algorithm for bi-criteria stochastic line balancing with flexible task times and zoning constraints pp. 737-751

Jietao Dong, Linxuan Zhang and Tianyuan Xiao

Residual life prediction based on dynamic weighted Markov model and particle filtering pp. 753-761

Shuai Zhang, Yongxiang Zhang and Jieping Zhu

Optimization of a supply portfolio in the context of supply chain risk management: literature review pp. 763-788

Faiza Hamdi, Ahmed Ghorbel, Faouzi Masmoudi and Lionel Dupont

An effective L-MONG algorithm for solving multi-objective flow-shop inverse scheduling problems pp. 789-807

Jianhui Mou, Xinyu Li, Liang Gao and Wenchao Yi

Bi-objective mixed-integer nonlinear programming for multi-commodity tri-echelon supply chain networks pp. 809-826

M. H. Alavidoost, Mosahar Tarimoradi and M. H. Fazel Zarandi

Position and orientation best-fitting based on deterministic theory during large scale assembly pp. 827-837

Zhehan Chen, Fuzhou Du and Xiaoqing Tang

A new arc detection method based on fuzzy logic using S-transform for pantograph–catenary systems pp. 839-856

Ebru Karakose, Muhsin Tunay Gencoglu, Mehmet Karakose, Orhan Yaman, Ilhan Aydin and Erhan Akin

A new immune multi-agent system for the flexible job shop scheduling problem pp. 857-873

Wei Xiong and Dongmei Fu

Probabilistic Boolean network modeling of an industrial machine pp. 875-890

Pedro J. Rivera Torres, E. I. Serrano Mercado and Luis Anido Rifón

An improved ant colony algorithm for dynamic hybrid flow shop scheduling with uncertain processing time pp. 891-904

W. Qin, J. Zhang and D. Song

Comparison of fuzzy inference system (FIS), FIS with artificial neural networks (FIS + ANN) and FIS with adaptive neuro-fuzzy inference system (FIS + ANFIS) for inventory control pp. 905-923

Prasert Aengchuan and Busaba Phruksaphanrat

A modal interval based method for dynamic decision model considering uncertain quality of used products in remanufacturing pp. 925-935

Min Huang, Pengxing Yi, Tielin Shi and Lijun Guo

Fault feature extraction of rolling element bearings based on wavelet packet transform and sparse representation theory pp. 937-951

Cong Wang, Meng Gan and Chang’an Zhu

Volume 29, issue 3, 2018

A hybrid particle swarm optimization with local search for stochastic resource allocation problem pp. 481-495

James T. Lin and Chun-Chih Chiu

Design of informatics-based services in manufacturing industries: case studies using large vehicle-related databases pp. 497-508

Chie-Hyeon Lim, Min-Jun Kim, Jun-Yeon Heo and Kwang-Jae Kim

Performance evaluation of candidate appointment schedules using clearing functions pp. 509-518

Katsumi Morikawa, Katsuhiko Takahashi and Daisuke Hirotani

Hybrid MCDM based methodology for selecting the optimum maintenance strategy for ship machinery systems pp. 519-531

Ikuobase Emovon, Rosemary A. Norman and Alan J. Murphy

Measuring organizational impacts by integrating competitive intelligence into executive information system pp. 533-547

Chi-Yen Yin

The impact of platform update interval on platform diffusion in a cooperative mobile ecosystem pp. 549-558

Gyesik Oh and Yoo S. Hong

A proposal of bargaining solution for cooperative contract in a supply chain pp. 559-567

Wakana Kato, Ikuo Arizono and Yasuhiko Takemoto

Crossdock truck scheduling with time windows: earliness, tardiness and storage policies pp. 569-583

Anne-Laure Ladier and Gülgün Alpan

Integrated process planning and scheduling: an enhanced ant colony optimization heuristic with parameter tuning pp. 585-601

S. Zhang and T. N. Wong

An effective and distributed particle swarm optimization algorithm for flexible job-shop scheduling problem pp. 603-615

Maroua Nouiri, Abdelghani Bekrar, Abderezak Jemai, Smail Niar and Ahmed Chiheb Ammari

Matheuristic algorithms for minimizing total tardiness in the m-machine flow-shop scheduling problem pp. 617-628

Quang Chieu Ta, Jean-Charles Billaut and Jean-Louis Bouquard

Mathematical programming models for scheduling in a CPU/FPGA architecture with heterogeneous communication delays pp. 629-640

Abdessamad Ait El Cadi, Omar Souissi, Rabie Ben Atitallah, Nicolas Belanger and Abdelhakim Artiba

Fault isolation by test scheduling for embedded systems using a probabilistic approach pp. 641-649

Daoud Aït-Kadi, Zineb Simeu-Abazi and Ahmed Arous

A two-phase approach to solve the synchronized bin–forklift scheduling problem pp. 651-657

Nizar El Hachemi, Mohammed Saddoune, Issmail El Hallaoui and Louis-Martin Rousseau

A novel differential evolution algorithm for solving constrained engineering optimization problems pp. 659-692

Ali Wagdy Mohamed

A supply chain network with product remanufacturing and carbon emission considerations: a two-phase design pp. 693-705

Yu-Chung Tsao, Vu-Thuy Linh, Jye-Chyi Lu and Vincent Yu

Maintenance optimization in failure-prone systems under imperfect preventive maintenance pp. 707-717

A. Khatab

Prediction of angular distortion in the fiber laser keyhole welding process based on a variable-fidelity approximation modeling approach pp. 719-736

Qi Zhou, Longchao Cao, Hui Zhou and Xiang Huang

Volume 29, issue 2, 2018

Modeling and measuring the structural complexity in assembly supply chain networks pp. 259-275

Nima Hamta, M. Akbarpour Shirazi, Sara Behdad and S.M.T. Fatemi Ghomi

Machine prognostics based on sparse representation model pp. 277-285

Likun Ren, Weimin Lv and Shiwei Jiang

Rule based optimization for a bulk handling port operations pp. 287-311

Saurabh Pratap, Yash Daultani, M. K. Tiwari and Biswajit Mahanty

A genetic algorithm for operation sequencing in CAPP using edge selection based encoding strategy pp. 313-332

Yuliang Su, Xuening Chu, Dongping Chen and Xiwu Sun

Identifying maximum imbalance in datasets for fault diagnosis of gearboxes pp. 333-351

Pedro Santos, Jesús Maudes and Andres Bustillo

A network-based manufacturing model for spiral bevel gears pp. 353-367

Jing Deng, Jubo Li and Xiaozhong Deng

MIP model and elitist strategy hybrid GA–SA algorithm for layout design pp. 369-387

I. Jerin Leno, S. Saravana Sankar and S. G. Ponnambalam

Multi-objective models and real case study for dual-channel FAP supply chain network design with fuzzy information pp. 389-403

Juan Yu, Mi Gan, Shaoquan Ni and Dingjun Chen

A Genetic Algorithm applied to pick sequencing for billing pp. 405-422

Anderson Rogério Faia Pinto, Antonio Fernando Crepaldi and Marcelo Nagano

Design of an efficient genetic algorithm for resource-constrained unrelated parallel machine scheduling problem with machine eligibility restrictions pp. 423-437

Mojtaba Afzalirad and Masoud Shafipour

Implementation of QFD method in quality analysis of confectionery products pp. 439-447

Malgorzata Kowalska, Magdalena Pazdzior and Anna Krzton-Maziopa

Erratum to: Implementation of QFD method in quality analysis of confectionery products pp. 449-450

Malgorzata Kowalska, Magdalena Pazdzior and Anna Krzton-Maziopa

Parallel bat algorithm for optimizing makespan in job shop scheduling problems pp. 451-462

Thi-Kien Dao, Tien-Szu Pan, Trong-The Nguyen and Jeng-Shyang Pan

Fault feature enhancement for rotating machinery based on quality factor analysis and manifold learning pp. 463-480

Meng Gan, Cong Wang and Chang’an Zhu

Volume 29, issue 1, 2018

Fuzzy-based sustainability evaluation method for manufacturing SMEs using balanced scorecard framework pp. 1-18

Sujit Singh, Ezutah Udoncy Olugu, Siti Nurmaya Musa and Abu Bakar Mahat

A genetic algorithm embedded with a concise chromosome representation for distributed and flexible job-shop scheduling problems pp. 19-34

Po-Hsiang Lu, Muh-Cherng Wu, Hao Tan, Yong-Han Peng and Chen-Fu Chen

Multi-objective modified differential evolution algorithm with archive-base mutation for solving multi-objective $$p$$ p -xylene oxidation process pp. 35-49

Qinqin Fan and Xuefeng Yan

Recognition of control chart patterns using fuzzy SVM with a hybrid kernel function pp. 51-67

Xueliang Zhou, Pingyu Jiang and Xianxiang Wang

Cluster analysis and neural network-based metamodeling of priority rules for dynamic sequencing pp. 69-91

A. S. Xanthopoulos and D. E. Koulouriotis

Two-generation Pareto ant colony algorithm for multi-objective job shop scheduling problem with alternative process plans and unrelated parallel machines pp. 93-108

Boxuan Zhao, Jianmin Gao, Kun Chen and Ke Guo

A restructured artificial bee colony optimizer combining life-cycle, local search and crossover operations for droplet property prediction in printable electronics fabrication pp. 109-134

Shikai Jing, Lianbo Ma, Kunyuan Hu, Yunlong Zhu and Hanning Chen

An effective detailed operation scheduling in MES based on hybrid genetic algorithm pp. 135-153

Li Zhou, Zhuoning Chen and Shaoping Chen

An impending deadlock-free scheduling method in the case of unified automated material handling systems in 300 mm wafer fabrications pp. 155-164

Qi Zhou and Bing-Hai Zhou

An improved league championship algorithm with free search and its application on production scheduling pp. 165-174

Wei Xu, Raofen Wang and Jiarong Yang

Multi-objective optimisation of pulsed Nd:YAG laser cutting process using integrated ANN–NSGAII model pp. 175-190

Sudipto Chaki, Ravi N. Bathe, Sujit Ghosal and G. Padmanabham

Machining accuracy reliability analysis of multi-axis machine tool based on Monte Carlo simulation pp. 191-209

Qiang Cheng, Hongwei Zhao, Yongsheng Zhao, Bingwei Sun and Peihua Gu

A novel method for determining the key customer requirements and innovation goals in customer collaborative product innovation pp. 211-225

Fang Wang, Hua Li and Aijun Liu

Production and coordination decisions in a closed-loop supply chain with remanufacturing cost disruptions when retailers compete pp. 227-235

Haiyan Wu, Xiaohua Han, Qianxia Yang and Xujin Pu

A new newsvendor policy model for dual-sourcing supply chains by considering disruption risk and special order pp. 237-244

Ashkan Mohsenzadeh Ledari, Seyed Hamid Reza Pasandideh and Mehrdad Nouri Koupaei

Assembly process optimization for reducing the dimensional error of antenna assembly with abundant rivets pp. 245-258

Jun Ni, Wen Cheng Tang and Yan Xing