Mathematical and Computer Modelling of Dynamical Systems

1998 - 2024

Current editor(s): I. Troch

From Taylor & Francis Journals
Bibliographic data for series maintained by Chris Longhurst ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 28, issue 1, 2022

Autonomous navigation of ships by combining optimal trajectory planning with informed graph search pp. 1-27

Luis Lüttgens, Benjamin Jurgelucks, Heinrich Wernsing, Sylvain Roy, Christof Büskens and Kathrin Flaßkamp

Modelling health impacts of hepatitis – model selection and treatment plans pp. 28-54

Cordula Reisch

Determination of 3D near fault seismic behaviour of Oroville earth fill dam using burger material model and free field-quiet boundary conditions pp. 55-77

Memduh Karalar and Murat Cavuslu

A port-Hamiltonian formulation of coupled heat transfer pp. 78-94

Jens Jäschke, Matthias Ehrhardt, Michael Günther and Birgit Jacob

Can we replicate real human behaviour using artificial neural networks? pp. 95-109

Georg Jäger and Daniel Reisinger

Cycle-by-Cycle Combustion Optimisation: Calibration of Data-based Models and Improvements of Computational Efficiency pp. 110-141

Thomas Makowicki, Matthias Bitzer and Knut Graichen

Modelling of a hydraulic system coupled with lumped masses pp. 142-196

Paul Treml, Gudrun Mikota, Bernhard Manhartsgruber and Andreas Brandl

An experimentally-verified approach for enhancing fluid drag force simulation in vertical oilwell drill strings pp. 197-228

Mihiran Galagedarage Don and Geoff Rideout

Volume 27, issue 1, 2021

Editorial pp. 1-2

The Editors

Modelling and control of a spherical pendulum via a non–minimal state representation pp. 3-30

Ricardo Campa, Israel Soto and Omar Martínez

Forecasting the primary energy consumption using a time delay grey model with fractional order accumulation pp. 31-49

Liang Zeng

Parameter extraction and modelling of the MOS transistor by an equivalent resistance pp. 50-86

Sherif M. Sharroush and Yasser S. Abdalla

Three-Dimensional Dynamic Modelling and Validation for Vibration of a Beam-Cable System pp. 87-116

Mohammad Hadi Jalali and Geoff Rideout

Crop prediction based on soil and environmental characteristics using feature selection techniques pp. 117-140

A. Suruliandi, G. Mariammal and S.P. Raja

Approximating the solution of the discharging process in a domestic hot water storage tank pp. 141-161

Frank Müller

Using Neural Networks for a Universal Framework for Agent-based Models pp. 162-178

Georg Jäger

Analysing of Tuberculosis in Turkey through SIR, SEIR and BSEIR Mathematical Models pp. 179-202

Yasin Ucakan, Seda Gulen and Kevser Koklu

An experimental comparison of mathematical heavy-duty city bus models to evaluate passenger ride comfort induced by road roughness pp. 203-221

Teron Nguyen, Patrick Swolana, Bernhard Lechner and Wong Y.D.

Dynamics of cough and particulate behaviour in the human airway pp. 222-245

Olusegun J. Ilegbusi, Don Nadun S Kuruppumullage and Bari Hoffman

Designing optimal models of nonlinear MIMO systems based on orthogonal polynomial neural networks pp. 246-262

Marko Milojković, Miroslav Milovanović, Saša S. Nikolić, Miodrag Spasić and Andjela Antić

Non Uniform Rational B-Splines and Lagrange approximations for time-harmonic acoustic scattering: accuracy and absorbing boundary conditions pp. 263-294

S.M. Dsouza, T. Khajah, X Antoine, S.P.A. Bordas and S. Natarajan

Control oriented modelling and modal analysis of the deformable mirror M4 of the extremely large telescope pp. 295-321

Philip L. Neureuther, Kevin Schmidt, Thomas Bertram and Oliver Sawodny

Flexible multibody system modelling of an aerial rescue ladder using Lagrange’s equations pp. 322-346

Simon Densborn and Oliver Sawodny

Dynamic analysis of an over-constrained parallel mechanism with the principle of virtual work pp. 347-372

Miao Chen, Qing Zhang, Yunfei Ge, Xianrong Qin and Yuantao Sun

RoboWalk: augmented human-robot mathematical modelling for design optimization pp. 373-404

S. Ali A. Moosavian, Mahdi Nabipour, Farshid Absalan and Vahid Akbari

Correction pp. 405-410

The Editors

Mathematical Modelling of Non-Linear Transient Long Waves by using Finite Element Method in an Irregular Shaped Harbour pp. 411-428

Sukhwinder Kaur, Prashant Kumar and Rajni

Port-Hamiltonian formulations of poroelastic network models pp. 429-452

R. Altmann, V. Mehrmann and B. Unger

Physical modelling and computer simulation of the cardiorespiratory system based on the use of a combined electrical analogy pp. 453-488

J. Fernandez de Canete, D. Cuesta, A. Luque and J. Barbancho

Exergetic port-Hamiltonian systems: modelling basics pp. 489-521

Markus Lohmayer, Paul Kotyczka and Sigrid Leyendecker

Modelling and dynamic behaviour analysis of the software rejuvenation system with periodic impulse pp. 522-542

Huixia Huo, Houbao Xu and Zhuoqian Chen

Emotion-involved human decision-making model pp. 543-561

Kaede Iinuma and Kiminao Kogiso

Energy simulation and variable analysis of refining process in thermo-mechanical pulp mill using machine learning approach pp. 562-585

B. Talebjedi, T. Laukkanen, H. Holmberg, E. Vakkilainen and S. Syri

Physically motivated structuring and optimization of neural networks for multi-physics modelling of solid oxide fuel cells pp. 586-614

Andreas Rauh, Julia Kersten, Wiebke Frenkel, Niklas Kruse and Tom Schmidt

Volume 26, issue 6, 2020

System model building and dynamic online control of traffic flow pp. 521-533

Xiao-Qiong Huang and Yun-Xiang Han

An energy-consumption model for establishing an integrated energy-consumption process in a machining system pp. 534-561

Wenbin Gu, Zhuo Li, Zeyu Chen and Yuxin Li

Oscillating stationary distributions of nanoclusters in an open system pp. 562-575

S. A Matveev, A. A Sorokin, A. P Smirnov and E.E. Tyrtyshnikov

Volume 26, issue 5, 2020

Fluid-Structure Port-Hamiltonian Model for Incompressible Flows in Tubes with Time Varying Geometries pp. 409-433

Luis A. Mora, Le Gorrec Yann, Hector Ramirez and Juan Yuz

Model updating for undamped gyroscopic systems with connectivity constraints pp. 434-452

Hairui Zhang and Yongxin Yuan

First principles versus artificial neural network modelling of a solar desalination system with experimental validation pp. 453-480

Ali Bagheri, Nadia Esfandiari, Bizhan Honarvar and Amin Azdarpour

Dynamic system optimal performances of shared autonomous and human vehicle system for heterogeneous travellers pp. 481-499

Yao Li

Modelling and analysis of the nonlinear string-mass structure of the vibration absorber pp. 500-519

L. Cveticanin, M. Zukovic, Z. Rakaric and D. Cveticanin

Volume 26, issue 4, 2020

Adieu and welcome pp. 301-303

Inge Troch

Editor’s note pp. 304-305

Wolfgang Kemmetmüller

Modelling and analysis of haemoglobin catalytic reaction kinetic system pp. 306-321

Yanhong Liu, Hui Lv, Bin Wang, Deyun Yang and Qiang Zhang

Multiphysics finite element model for the computation of the electro-mechanical dynamics of a hybrid reluctance actuator pp. 322-343

F. Cigarini, E. Csencsics, J. Schlarp, S. Ito and G. Schitter

Cattaneo–Christov heat flux model for three-dimensional flow of a viscoelastic fluid on an exponentially stretching surface pp. 344-356

Sehrish Malik, M. Bilal Ashraf and Adnan Jahangir

Master-slave synchronization of neural networks with time-varying delays via the event-triggered control pp. 357-373

Jun Zhou, Dongbing Tong, Qiaoyu Chen and Wuneng Zhou

Production and payment policies for an imperfect manufacturing system with discount cash flows analysis in fuzzy random environments pp. 374-408

Puspita Mahata and Gour Chandra Mahata

Volume 26, issue 3, 2020

Robust object-oriented formulation of directed thermofluid stream networks pp. 204-233

Dirk Zimmer

System dynamics modelling of mixed recycling mode based on contract: a case study of online and offline recycling of E-waste in China pp. 234-252

Shidi Miao, Di Liu, Junfeng Ma and Feng Tian

Dynamic modelling of a multi-cable driven parallel platform with guiding devices pp. 253-267

Yandong Wang, Ziming Kou and Guohua Cao

Trajectory-tracking of 6-RSS Stewart-Gough manipulator by feedback-linearization control using a novel inverse dynamic model based on the force distribution algorithm pp. 268-299

Zafer Mahmoud, Mohammad Reza Arvan, Vahab Nekoukar and Mohammad Rezaei

Volume 26, issue 2, 2020

Modelling the clogging of gas turbine filter houses in heavy-duty power generation systems pp. 119-143

Sabah Ahmed Abdul-Wahab, Abubaker Sayed Mohamed Omer, Kaan Yetilmezsoy and Majid Bahramian

On the combination of kernel principal component analysis and neural networks for process indirect control pp. 144-168

A. Errachdi, S. Slama and M. Benrejeb

Modelling a Viennese ballroom: agent-based simulation to investigate complex behaviour pp. 169-192

M. Bicher, S. Winkler and A. Körner

Growth rate, growth curve and growth prediction of tumour in the competitive model pp. 193-203

Mahdi Sohrabi-Haghighat and Atefeh Deris

Volume 26, issue 1, 2020

A method for reduction of human ventricular action potential model pp. 1-30

S. H. Sabzpoushan and A. Ghajarjazy

Modelling and passive control of flexible guiding hoisting system with time-varying length pp. 31-54

Naige Wang, Guohua Cao, Lu Yan and Lei Wang

Detectability conditions for output-only subspace identification pp. 55-79

Amirali Sadeqi, Shapour Moradi and Kourosh Heidari Shirazi

Selective generalized travelling salesman problem pp. 80-118

Tusan Derya, Esra Dinler and Barış Keçeci