Research Papers Faculty of Materials Science and Technology Slovak University of Technology

2010 - 2023

Current editor(s): Kvetoslava Rešetová

From Sciendo
Bibliographic data for series maintained by Peter Golla ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 24, issue 39, 2016

Comparison of Available Technologies for Fire Spots Detection via Linear Heat Detector pp. 9-14

Miksa František and Nemlaha Eduard

An Evaluation of Material Properties Using EMA and FEM pp. 15-22

Ďuriš Rastislav and Labašová Eva

Addressing the Movement of a Freescale Robotic Car Using Neural Network pp. 23-31

Horváth Dušan and Cuninka Peter

Embedded PLC Webserver and Possibilities of its Utilization pp. 33-42

Kopček Michal

Line Width Recovery after Vectorization of Engineering Drawings pp. 43-50

Gramblička Matúš and Vaský Jozef

Note on the Sensitivity of Simulated Solutions of the Nonlinear Singularly Perturbed Dynamical System on the Used Different Rewriting into a System of First Order Differential Equations pp. 51-55

Liška Vladimír, Šútova Zuzana and Pavliak Dušan

Application of Numerical Simulation for the Verification of Design of Clamping a Workpiece in Jaws pp. 57-62

Oravcová Jarmila and Riečičiarová Eva

On Stability Criterion of 4-th Order Quasilinear Differential Equations with Quasiderivatives pp. 63-69

Palumbíny Oleg

Contribution to Dynamical Properties of Machine Aggregates with Gearing pp. 71-76

Riečičiarová Eva and Oravcová Jarmila

Utilization of Advanced Methods in the Control of a Mechatronic System with Flexible Elements pp. 77-84

Juhás Martin, Halenár Igor and Juhásová Bohuslava

Determination of Modulus of Elasticity and Shear Modulus by the Measurement of Relative Strains pp. 85-92

Labašová Eva

Dynamic Stability of Generalized Beck-Reut’s Beam pp. 93-99

Nánási Tibor

Design of a Communication Scheme in a Modern Factory in Accordance with the Standard of Industry 4.0 pp. 101-109

Halenár Igor, Juhásová Bohuslava and Juhás Martin

Preparation and Cluster Analysis of Data from the Industrial Production Process for Failure Prediction pp. 111-116

Németh Martin and Michaľčonok German

Preprocessing Raw Data in Clinical Medicine for a Data Mining Purpose pp. 117-122

Peterková Andrea and Michaľčonok German

Data Storing Proposal from Heterogeneous Systems into a Specialized Repository pp. 123-128

Václavová Andrea, Tanuška Pavol and Jánošík Ján

Improving Logistics Processes in Industry Using Web Technologies pp. 129-136

Jánošík Ján, Tanuška Pavol and Václavová Andrea

A Proposal for Production Data Collection on a Hybrid Production Line in Cooperation with MES pp. 137-144

Znamenák Jaroslav, Križanová Gabriela, Iringová Miriam and Važan Pavel

Inverting Matrix Using a Graph in the Theory of Dynamic Systems pp. 145-150

Masárová Renáta and Pavlíková Soňa

Application of Numerical Simulation for the Analysis of the Processes of Rotary Ultrasonic Drilling pp. 151-158

Naď Milan, Čičmancová Lenka and Hajdu Štefan

Kinematics Simulation of the Cardan Shaft for Investigation of the Cardan Error in Catia V5 pp. 159-166

Hajdu Štefan, Rolník Ladislav and Švoš Juraj

Cluster Analytical Method of Fault Risk Analysis in Systems pp. 167-173

Michaľčonok German and Horalová Kalinová Michaela

Volume 24, issue 38, 2016

Influence of Cutting Environment on Tool Life pp. 9-15

Buranská Eva, Gerulová Kristína and Buranský Ivan

Design and Production of the Injection Mould with a Cax Assistance pp. 17-26

Likavčan Lukáš, Frnčík Martin, Zaujec Rudolf, Satin Lukáš and Martinkovič Maroš

Real Time Monitoring and Automatic Regulation System for Metalworking Fluids pp. 27-34

Gerulová Kristína, Neštický Martin, Buranská Eva and Ružarovský Roman

Using Sodium Hydrogen Carbonate for Foaming Polymers pp. 35-41

Satin Lukáš, Likavčan Lukáš, Košík Miroslav, Rantuch Peter and Bílik Jozef

Impact of Machined Workpiece Position in Workspace on Precision of Manufacturing Using an Angular Robot pp. 43-49

Kusá Martina and Bárta Jozef

Visualisation in Assembly pp. 51-55

Václav Štefan and Jurko Jozef

Part as an Object of Assembly pp. 57-65

Václav Štefan, Jurko Jozef and Lecký Šimon

The Stability of Wedm pp. 67-72

Šimna Vladimír

The Influence of Internal Structures in Fused Deposition Modeling Method on Dimensional Accuracy of Components pp. 73-80

Milde Ján and Morovič Ladislav

Reduction of Milling Time by Using CAQ Technologies pp. 81-86

Zaujec Rudolf, Pokorný Peter, Šimna Vladimír, Vopát Tomáš, Urminský Ján and Bodišová Petra

3D Model Optimization of Four-Facet Drill for 3D Drilling Simulation pp. 87-93

Buranský Ivan, Necpal Martin and Bračík Matej

Wear of Cutting Tool with Excel Geometry in Turning Process of Hardened Steel pp. 95-102

Samardžiová Michaela

Theoretical Aspect of Assembly pp. 103-112

Václav Štefan, Jurko Jozef, Božek Pavol and Lecký Šimon

Impact of Viscosity on Filling the Injection Mould Cavity pp. 113-121

Satin Lukáš and Bílik Jozef

Volume 24, issue 37, 2016

Reduction of Manual Handling with Loads and Activities Causing Musculosceletal Disorders in a Selected Workplace pp. 7-14

Beňo Rastislav, Lenhardtová Zuzana and Zelenay Tomáš

A Designed Model of Sustainable Competitiveness for Slovak Industrial Companies in the Global Context of Sustainable Corporate Social Responsibility pp. 15-22

Božiková Lucia and Šnircová Jana

Improving the Reverse Logistics Respecting Principles of Sustainable Development in an Industrial Company pp. 23-32

Fidlerová Helena and Mĺkva Miroslava

Business Performance in the Context of Corporate Culture pp. 33-38

Haršányová Petra, Vaňová Jaromíra and Čambál Miloš

Selected Aspects of Assessment/Improvement of Academic Research Quality, Also of Industrial Management pp. 39-50

Jemala Marek

The Proposal Concept of Development and Implementation in Strategy of Sustainable Corporate Social Responsibility in the Context of the HCS Model 3E pp. 51-62

Sakál Peter and Hrdinová Gabriela

Utilisation and Improvement of the Initialisation of Project Communication Processes During the Management of Projects in Industrial Enterprises in Slovakia pp. 63-72

Samáková Jana, Šujanová Jana and Špirková Marta

Financial Analysis of a Selected Company pp. 73-92

Baran Dušan, Pastýr Andrej and Baranová Daniela

Brain Gain am Beispiel Österreich pp. 93-98

Aschbacher Christine, Gejguš Mirko and Sablik Jozef

Comparison of the Total Costs of Renewable and Conventional Energy Sources pp. 99-104

Gejguš Mirko, Aschbacher Christine and Sablik Jozef

Volume 23, issue s1, 2015

The Verification of Influence of the Point „C“ Position from Given Interval to Solving Systems with Highspeed Feedback pp. 7-18

Bajčičáková Ingrida and Jurovatá Dominika

Improving Cognitive Skills of the Industrial Robot pp. 19-28

Bezák Pavol

Evaluation of Safety Parameters According to IEC Standards pp. 29-36

Cuninka Peter and Strémy Maximilián

Remote Dosimetry Monitoring Unit for Human Unfriendly Environment pp. 37-44

Eliáš Andrej and Závacký Pavol

Kinetics of Electrons from Plasma Discharge in a Latent Track Region Induced by Swift Heavy ION Irradiation pp. 45-52

Minárik Stanislav

On the Relativistic Correction of Particles Trajectory in Tandem Type Electrostatic Accelerator pp. 53-60

Minárik Stanislav

Charged Particle Dynamics Inside Electrostatic Quadrupole Deflection System with Circular Electrodes and Rotationally Symmetric Design pp. 61-70

Minárik Stanislav and Riedlmajer Róbert

Quantization of Energy in 1D Model of Crystal Lattice with Local Perturbations Induced by Ion-Beam Impact pp. 71-78

Minárik Stanislav

Hypervisor for Virtualization in Private Cloud pp. 79-84

Závacký Pavol, Eliáš Andrej and Stémy Maximilián

Volume 23, issue 36, 2015

Analysis Of Deviation In The Measurement Of Vibrations pp. 9-15

Čekan Pavol, Harangozó Jozef, Szabová Zuzana, Kuracina Richard and Balog Karol

Combustion Gases And Heat Release Analysis During Flame And Flameless Combustion Of Wood Pellets pp. 17-24

Horváth Jozef, Wachter Igor and Balog Karol

3,5-Dichlorophenol Removal From Wastewater Using Alternative Adsorbents pp. 25-32

Kobetičová Hana, Lipovský Marek, Wachter Igor and Soldán Maroš

Removal Of Copper From Aqueous Solutions By Using Natural And Fe-Modified Clinoptilolite pp. 33-40

Lipovský Marek, Sirotiak Maroš and Soldán Maroš

Sorption Kinetics Of Selected Heavy Metals Adsorption To Natural And Fe(III) Modified Zeolite Tuff Containing Clinoptilolite Mineral pp. 41-47

Sirotiak Maroš, Lipovský Marek and Bartošová Alica

Determination Of The Maximum Explosion Pressure And The Maximum Rate Of Pressure Rise During Explosion Of Wood Dust Clouds pp. 49-56

Kuracina Richard, Szabová Zuzana and Čekan Pavol

Labelling Of Textile Products From The Perspective Of Quality, Maintenance, Safety And Environment pp. 57-64

Draxlerová Mária, Rusko Miroslav and Kuracina Marcel

The Study Of Metalworking Fluids Biodegradability By Indirect Measurement Of Bacterial Inoculum Respiration pp. 65-75

Gerulová Kristína, Tatarka Ondrej, Štefko Tomáš and Škulavík Tomáš

The Study Into Potential Enhacement Of Metalworking Fluids Biodegradability By The Application Of O3/UV pp. 77-85

Gerulová Kristína, Tatarka Ondrej, Štefko Tomáš and Škulavík Tomáš

Cultivation Of Microalgae (Chlorella vulgaris) For Biodiesel Production pp. 87-95

Blinová Lenka, Bartošová Alica and Gerulová Kristína

Characterisation Of Polysacharides And Lipids From Selected Green Algae Species By FTIR-ATR Spectroscopy pp. 97-102

Bartošová Alica, Blinová Lenka and Gerulová Kristína

Comprehensive Study Of Duckweed Cultivation And Growth Conditions Under Controlled Eutrophication pp. 103-107

Bartošová Alica, Sirotiak Maroš and Fiala Jozef

The Activation Energy Of Ignition Calculation For Materials Based On Plastics pp. 109-115

Rantuch Peter, Wachter Igor, Martinka Jozef and Kuracina Marcel

Voluntary Tools Of The Environmental Oriented Product Policy pp. 117-124

Rusko Miroslav

Environmental And Quality Management System In The Context Of Sustainable Development pp. 125-132

Rusko Miroslav

Integrated Management System – Scope, Possibilities And Methodology pp. 135-140

Čekanová Katarína

CSI Index Of Customer’s Satisfaction Applied In The Area Of Public Transport pp. 141-150

Poliaková Adela

The FTA Method And A Possibility Of Its Application In The Area Of Road Freight Transport pp. 151-158

Poliaková Adela

Analysis Of Provided Service Quality In Flowers And Living Plants Transport pp. 159-166

Poliaková Adela

Selected Aspects Of The Risk In The Supply Chain In Context Of The Supplier Quality Management pp. 167-178

Koblen Ivan and Lestyánszka Škůrková Katarína

Experience Of Implementing The Integrated Management System In Manufacturing Companies In Slovakia pp. 179-186

Lestyánszka Škůrková Katarína, Kučerová Marta and Fidlerová Helena