Research Papers Faculty of Materials Science and Technology Slovak University of Technology

2010 - 2023

Current editor(s): Kvetoslava Rešetová

From Sciendo
Bibliographic data for series maintained by Peter Golla ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 26, issue 43, 2018

Status of Ion Beam Modification and Analysis of Materials at STU MTF pp. 9-16

Dobrovodský Jozef, Vaňa Dušan, Beňo Matúš, Závacká Anna, Muška Martin and Riedlmajer Róbert

On the Problem of the Ion Energy Loss in Thin Absorbers pp. 17-24

Minárik Stanislav and Riedlmajer Róbert

Trace Elements Analysis by Pixe Spectroscopy pp. 25-32

Beňo Matúš, Dobrovodský Jozef, Vaňa Dušan, Minárik Stanislav and Riedlmajer Róbert

The Effect of Increased Cu Content on Microstructure and Melting of Utilized Sn-0.3Ag-0.7Cu Solder pp. 33-44

Drienovský Marián, Trnková Lýdia Rízeková, Čička Roman, Priputen Pavol, Pekarčíková Marcela and Janovec Jozef

Microstructure Characteristics of Borated Austenitic Stainless Steel Welds pp. 45-52

Dománková Mária, Adamech Marek, Petzová Jana, Bártová Katarína and Pinke Peter

Structural Analysis of Superconductors at MTF: A Review pp. 53-60

Skarba Michal, Pekarčíková Marcela, Konopka Pavol, Mišík Jozef and Cuninková Eva

Effect of Pulsed Laser Ablation on the Increase of Adhesion of CRN Coating-Substrate pp. 61-70

Zacková Paulína, Števlíková Lucia, Čaplovič Ľubomír, Sahul Martin and Podgurski Vitali

Volume 26, issue 42, 2018

Critical Heat Flux Determination of Electric Cable Insulation pp. 11-20

Rantuch Peter, Štefko Tomáš and Martinka Jozef

Fire Risk of Halogen-Free Electrical Cable pp. 21-27

Martinka Jozef, Rantuch Peter, Wachter Igor and Balog Karol

Determination of the Coefficient of Friction Under Cold Tube Drawing Using FEM Simulation and Drawing Force Measurement pp. 29-34

Necpal Martin, Martinkovič Maroš and Václav Štefan

Problems with Tribological Testings of Marketable Oils Using Laboratory Model Test Rigs pp. 35-46

Rigo Jürgen and Kovačócy Pavel

Research of the Influence of Clamping Forces on the Roundness Deviations of the Pipes Turned Surface pp. 47-54

Görög Augustín and Görögová Ingrid

Methods for Efficiency Improvement of Production and Logistic Processes pp. 55-61

György Kovács

Production Systems Planning and Databases in Assembly pp. 63-67

Lecký Šimon, Václav Štefan, Michal Dávid and Necpal Martin

The Main Research Directions in CA Assembly Analysis and Assembly Workstation Design pp. 69-75

Václav Štefan, Senderská Katarína and Mareš Albert

Comparative Analysis of the Results of Measuring Roundness pp. 77-84

Némedi Imre, Sánta Róbert, Fürstner Igor and Košt’ál Peter

Using Virtual Reality as a Support Tool for the Offline Robot Programming pp. 85-91

Holubek Radovan, Ružarovský Roman and Delgado Sobrino Daynier Rolando

Virtual Commissioning of a Robotic Cell Prior to its Implementation Into a Real Flexible Production System.: Generation of the Robot Offline Programming (OLP) and Validation of the PLC Code pp. 93-101

Ružarovský Roman, Holubek Radovan and Delgado Sobrino Daynier Rolando

Analysis of the Arc Current of CMT Brazing Process pp. 103-108

Mičian Miloš and Marônek Milan

Integrating Production and Maintenance Planning as an Element of Success at the Tactical Level: A Fuzzy Control Theory Approach pp. 109-117

Díaz Cazañas Ronald, Delgado Sobrino Daynier Rolando, María De La Paz Martínez Estrella, Košťál Peter and Mudriková Andrea

Analysis of the Surface Morphology of the S235JRG1 Steel After an Abrasive Water Jet Cutting Process pp. 119-126

Moravčíková Jana, Delgado Sobrino Daynier Rolando and Košťál Peter

Integrative Programming of Production and Preventive Maintenance Tasks in an Environment of Identical Parallel Machines: Proposal of a Construction Heuristic pp. 127-134

Delgado Sobrino Daynier Rolando, Díaz Cazañas Ronald, Ružarovský Roman and Holubek Radovan

Effects of Logistic Processes to the Maintenance Time pp. 135-143

Telek Péter

Laboratory for Drawingless Manufacturing pp. 145-149

Koštál Peter and Mudriková Andrea

Study of Porosity Distribution in Spin Cast Zinc Alloy Castings pp. 151-158

Bajčičák Martin and Šuba Roland

Racionalization of Robotic Workstation in Welding Industry pp. 159-164

Michal Dávid, Košťál Peter, Lecký Šimon and Václav Štefan

3D Digitization and Additive Manufacturing Technologies in Medicine pp. 165-170

Molnár Ivan and Morovič Ladislav

Plasma Polishing of Stainless Steels – The Electrolyte Concentration Vs. Gloss Level pp. 171-176

Podhorský Štefan and Bajčičák Martin

Influence of End Mill Helix Angle on Surface Quality of Aluminium Thin-Walled Parts pp. 177-188

Buranský Ivan, Bračík Matej and Šimna Vladimír

Estimation of Conditions in Exchangeable Jaws Design of Pneumatics Gripper pp. 189-195

Bučányová Marcela, Hrušková Erika, Matúšová Miriam and Kusá Martina

Influence of Finish Milling Strategies on the Tool Wear pp. 197-206

Zaujec Rudolf, Pokorný Peter, Jurina František, Vopát Tomáš and Šimna Vladimír

Volume 25, issue 41, 2017

Design of Concept of Sustainable Marketing Communication Strategy for a Ideal Industrial Enterprise and Practical Applications of this Concept pp. 9-16

Šujaková Monika, Golejová Simona and Sakál Peter

Methodology Proposal of Slovak Industrial Enterprise Managers' Competenc in the Sustainable Development Context pp. 17-26

Jurík Lukáš and Sakál Peter

Potential for the Use of Biomass as a Prospective Renewable Energy Source pp. 27-30

Gejguš Mirko, Aschbacher Christine and Sablik Jozef

Analysis of Hydropower Potential Utilization of Watercourses in Slovakia pp. 31-34

Gejguš Mirko, Aschbacher Christine and Sablik Jozef

Die Steuerung von den Multigenerationteams in den Industriebetrieben pp. 35-42

Vraňaková Natália, Chlpeková Andrea, Koltnerová Kristína and Pračková Petra

Model Recommended Values of Corporate Culture for Industrial Companies in Slovak Republic pp. 43-50

Urbanovičová Petra, Mikulášková Justína and Čambál Miloš

Using the Communication Methods, Tools and Support During Management of Project Communication in Industrial Manufacturing Enterprises pp. 51-62

Samáková Jana, Babčanová Dagmar, Hrablikchovanová Henrieta, Mesárošová Jana and Šujanová Jana

Employee Performance in the Context of the Problems of Measurement and Evaluation in Practice pp. 63-70

Szabó Peter, Mĺkva Miroslava, Vaňová Jaromíra and Marková Petra

Significance of Coaching in the Context of Emotion Regulation pp. 71-77

Novotná Ivana, Blahová Jarmila and Šatanková Sláva

Implementation Process of 5S for a Company in Real Life - Problems, Solutions, Successes pp. 79-86

Czifra György

Digitalisierung – Management Zwischen 0 und 1 pp. 87-89

Friedrich Stefan and Rachholz Josef

Volume 25, issue 40, 2017

Determination of the Explosion Characteristics of Wheat Flour pp. 9-16

Kuracina Richard, Szabová Zuzana, Pangrácová Denisa and Balog Karol

Study of Explosion Characteristics of Wood Dust Clouds in Dependence of the Particle Size Distribution pp. 17-23

Kuracina Richard, Szabová Zuzana and Menčík Matej

Human Health Concenrs of Metalworking Fluid Components: Part I – Base oils pp. 25-32

Gerulová Kristína, Buranská Eva and Soldán Maroš

Human Health Concenrs of the Metalworking Fluid Components: Part II – Biocides, corrosion inhibitors and neutralizing agents pp. 33-40

Gerulová Kristína, Buranská Eva and Soldán Maroš

DTA Evaluation of Spruce Wood Degradation Process pp. 41-48

Hrušovský Ivan, Rantuch Peter, Martinka Jozef and Dzíbelová Simona

Calcination of Nickel Mud pp. 49-53

Klačanská Michaela, Kobetičová Hana, Soldán Maroš, Haršáni Marián and Kuracina Marcel

Flammability Parameters of Candles pp. 55-61

Balog Karol, Kobetičová Hana and Štefko Tomáš

Study of Wastewaters Contaminated with Heavy Metals in Bioethanol Production pp. 63-71

Bartošová Alica and Blinová Lenka

Gas Chromatographic Determination of Fatty Acids in Oils with Regard to the Assessment of Fire Hazard pp. 73-81

Bartošová Alica and Štefko Tomáš

Thermal Properties of Lignocellulose Pellets pp. 83-90

Wachter Igor, Hirle Siegfried and Balog Karol

Review: Utilization of Waste From Coffee Production pp. 91-101

Blinová Lenka, Sirotiak Maroš, Bartošová Alica and Soldán Maroš

Usage of FTIR-ATR as Non-Destructive Analysis of Selected Toxic Dyes pp. 103-111

Bartošová Alica, Blinová Lenka, Sirotiak Maroš and Michalíková Anna

Biodiesel Production from Spent Coffee Grounds pp. 113-121

Blinová Lenka, Bartošová Alica and Sirotiak Maroš

The Effect of the Heat Flux on the Self-Ignition of Oriented Strand Board pp. 123-129

Hirle Siegfried and Balog Karol