Surface Review and Letters (SRL)

1994 - 2026

Current editor(s): S Y Tong

From World Scientific Publishing Co. Pte. Ltd.
Bibliographic data for series maintained by Tai Tone Lim ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 33, issue 07, 2026

SPHERICAL GRAPHENE FILM GROWN ON CARBIDE FOR SENSOR MATRIX pp. 1-23

Guangdong Huang and Yuqiao Jia

ANOMALY STABILITY DETECTION METHOD OF MULTI-STATION PRECISION MACHINING MECHANICAL FIXTURES pp. 1-11

Shan Li

GREEN SYNTHESIS OF CaO–PdNps FROM LAWSONIA INERMIS LEAF EXTRACT: CATALYTIC REDUCTION OF METHYLENE BLUE WITH CENTRAL COMPOSITE DESIGN-ENHANCED NEURAL NETWORK PREDICTION pp. 1-16

Mohammed Beldjilali, Drai Ikram, Khaled Mekhissi, Inas Taha, Issam Ismail, Abdelkader Nebatti Ech-Chergui, Lahcen Belarbi and Smain Bousalem

TIN-ANTIMONY OXIDE-GRAPHITE COMPOSITE AS ANODE MATERIAL WITH HIGH CAPACITY FOR LITHIUM-ION BATTERIES pp. 1-6

Liangpeng Tang, Ran Wei, Wenqing Xie, Xiaoqing Liu, Chen Shang and Junjie Zhang

INVESTIGATIONS ON THE MACHINABILITY CHARACTERISTICS OF Al–Zn(5.4)–Mg(2.4)–Cu(1.4) ALLOY COMPOSITE USING TOPSIS APPROACH pp. 1-10

M. Ezhilan, S. Kailainathan, A. H. Seikh and S. V. Alagarsamy

DRL-BASED KINETIC AND THERMAL ENERGY PROPERTY DETECTION FOR WELDED JOINT PERFORMANCE ANALYSIS pp. 1-15

M. Anusuya, M.â Mohammed Asif, Srinivas Chitturi, E. Balaji, M. Ravichandran, G. Yedukondalu, E. Shankar and A. Rajaram

FABRICATION OF AA1100/Fl2O3 COMPOSITE STRIPS AND THE IMPROVEMENT OF THEIR ELECTROMAGNETIC, MECHANICAL AND FRACTURE PROPERTIES pp. 1-15

Paul Rodrigues, Sandeep Singh, Ashish Singh, Munthar Kadhim Abosaoda and X. P. Castagne

ERRATUM — FABRICATION OF AA1100/Fe2O3 COMPOSITE STRIPS AND THE IMPROVEMENT OF THEIR ELECTROMAGNETIC, MECHANICAL AND FRACTURE PROPERTIES pp. 1-2

Paul Rodrigues, Sandeep Singh, Ashish Singh, Munthar Kadhim Abosaoda and X. P. Castagne

METAL-SUPPORTED SOLID OXIDE FUEL CELLS: SYNTHESIS AND ELECTROCHEMICAL PROPERTIES ANALYSIS USING OPTIMIZATION METHOD pp. 1-13

Rajesh Kumar Patnaik, Yagya Dutta Dwivedi, Bipin Kumar Srivastava, A. Arulmozhi, D. V. S. S. S. V. Prasad, Surrya Prakash Dillibabu, Amara S. A. L. G. Gopala Gupta and A. Rajaram

THE PREPARATION AND CHARACTERIZATION OF A LANTHANUM-BASED RARE EARTH CONVERSION COATING ON MAGNESIUM ALLOY AZ91D AND ITS DEGRADATION IN 3.5% NaCl SOLUTION pp. 1-9

Jieli Gao, Ruizhi Xu, Fuan Yan, Baomin Fan, Yunxuan Weng and Yong Zhou

Volume 33, issue 06, 2026

PERFORMANCE ANALYSIS OF AISI 4340 HARDENED STEEL IN DUAL JET MQL TURNING SYSTEM: A COMPARISON STUDY BETWEEN CVD AND PVD-COATED CARBIDE TOOLS pp. 1-22

Rabinarayan Bag, Amlana Panda, Ashok Kumar Sahoo and Ramanuj Kumar

AN ASSESSMENT OF PHASE CHANGE MATERIAL, PREPARATION TECHNIQUES AND CONTAINMENT MATERIAL WITH DIFFERENT MOLTEN SALTS FOR THERMAL ENERGY STORAGE SYSTEM pp. 1-27

M. Prem Kumar and M. Manikandan

INVESTIGATION OF X-RAY EMISSION FROM LASER PRODUCED ALUMINIUM ANTIMONIDE PLASMA pp. 1-11

Sidra Ashraf, Sidra Khalid, Saira Shaheen, Ahmad Raza and Saira Riaz

SURFACE MODIFICATION OF CERAMIC SCULPTURES: IMPROVING MECHANICAL STRENGTH AND AESTHETIC PERFORMANCE THROUGH NANOCOMPOSITE COATINGS pp. 1-18

Wenli Lian

ERRATUM — MORPHOLOGY OF WEAR DEBRIS DURING DRY SLIDING OF Ti–6Al–4V ALLOY AT HIGH TEMPERATURE UNDER VACUUM ENVIRONMENTS pp. 1-1

Basant Lal, Abhijit Dey, Upendra Maurya and Ajaz Ali

INFLUENCE OF CuO NANOPARTICLES ON THE STRUCTURAL PROPERTIES, SURFACE CHARACTERISTICS, AND OPTICAL BEHAVIOR OF POLY(4-CHLOROANILINE) POLYMERIC FILMS pp. 1-7

B. M. Alotaibi, Haifa A. Al-Yousef, A. Atta and E. Abdeltwab

SYNTHESIS OF CdS@Ti3C2/TiO2 NANOCOMPOSITES WITH FLOWER-LIKE SHAPES AND THEIR PHOTOCATALYTIC DEGRADATION PROPERTIES pp. 1-7

Zezhong Xu, Dewei Liang, Yuanxing Zhou and Changliang Han

A NOVEL DOUBLE-SIDE LASER WELDED THICK PLATE: MICROSTRUCTURE AND NUMERICAL PREDICTION OF TENSILE TEST pp. 1-9

Dhinakaran Veeman, Murugan Vellaisamy, Sarankumar Thanigainathan, Micheal Agnelo Browne and Mohan Kumar Subramaniyan

QUALITY AND PRODUCTIVITY IMPROVEMENT IN THE MILLING OF POLYOXYMETHYLENE CO-POLYMER (POM C) USING RSM, SVM AND GENETIC ALGORITHM pp. 1-15

Idriss Tibakh, Mohamed Athmane Yallese and Salim Belhadi

SURFACE DEFECT DETECTION OF GLASS COVERSLIPS BASED ON DEEP LEARNING: HYBRID CNN TRANSFORMATION METHOD pp. 1-15

Zhenshou Yang and Qunsheng Yi

Volume 33, issue 05, 2026

IRON-BASED SPIKY MICROSPHERES SYNTHESIZED USING OXALATE VIA ONE-STEP HYDROTHERMAL PROCESS — PRESENCE OF HUMBOLDTINE pp. 1-8

Mohanad El-Harbawi, Chun-Yang Yin, Maher M. Alrashed, Saeed Alhawtali, Lahssen El Blidi, Ahmed S. Alshabebi and Zhong-Tao Jiang

EFFECT OF SILVER DOPING ON IRON OXIDE ELECTRICAL PROPERTIES pp. 1-9

SARITAÅž Sevda

DEVELOPING HIGH-PERFORMANCE LOW-TEMPERATURE CO2 GAS SENSORS BASED ON NANOSTRUCTURED CO3O4 THIN FILMS: A SOL–GEL APPROACH AND THE ROLE OF ANNEALING pp. 1-12

Gayatri Joshi, L. P. Purohit, Suhas, Monika Chaudhary, Pankaj K. Pal and Mohammad Hadi Dehghani

ASSESSMENT OF IMPACT-RELATED FIBER FRACTURE AND MATRIX DAMAGE IN GFRP COMPONENTS USING THE SURFACE SANDBLASTING METHOD pp. 1-12

Peng Chen, Xiuli Wang and Yonghong Ran

WELD QUALITY APPRAISAL OF AA1050/Cu FSWed JOINTS: A NOVEL HYBRID TAGUCHI–WASPAS–ALIBABA AND THE FORTY THIEVES ALGORITHM pp. 1-15

Kanchan Kumari, Swastik Pradhan, Manisha Priyadarshini and Abhishek Barua

ERRATUM — PREDICTIVE MODELING AND OPTIMIZATION OF CUTTING PARAMETERS IN HIGH SPEED HARDENED TURNING OF AISI D2 STEEL USING RSM, ANN AND DESIRABILITY FUNCTION pp. 1-1

Hamama Mebrek, Salah Mansouri, Youssef Touggui, Hacene Ameddah, Mohamed Athmane Yallese and Hadj Mohamed Benia

STIR CASTING OF ALUMINUM METAL MATRIX COMPOSITE FOR AUTOMOBILE APPLICATION — A REVIEW pp. 1-14

Sai Pardeshi, Shivprakash Barve, Pralhad Pesode and Niraj Gupta

THE IMPACT OF OPTIMIZED OPTICAL PERFORMANCE DESIGN OF BUILDING CURTAIN WALL SURFACE ON INDOOR LIGHTING ENVIRONMENT AND ENERGY CONSUMPTION pp. 1-14

Yi Liang

REAL-TIME DEFECT DIAGNOSIS OF PHOTOVOLTAIC MODULES BASED ON CONVOLUTIONAL NEURAL NETWORKS AND NANO-OPTICAL SURFACE CHARACTERIZATION pp. 1-14

Fan Xu

EXPERIMENTAL ANALYSIS AND OPTIMIZATION OF PLASMA SPRAY PARAMETERS ON POROSITY AND CORROSION WEAR OF Cr3C2/8YSZ COMPOSITE-COATED AUSTENITIC STAINLESS STEEL pp. 1-16

S. Maharajan, F. Michael Thomas Rex, D. Ravindran and C. Veera Ajay

Volume 33, issue 04, 2026

EFFECT OF REINFORCEMENT PARTICLES (SiC/ALUMINA) ADDITION ON Al6061 ALLOY AND OPTIMIZATION OF DRY SLIDING WEAR PROPERTIES USING GRA pp. 1-10

C. Ramesh Kumar, R. Gokuldass, D. Jayabalakrishnan and R. Manikandan

DEPOSITION BEHAVIOR OF WC-17Co COLD-SPRAYED COMPOSITE COATING ON HYDRO TURBINE STEELS pp. 1-10

Harvinder Singh, Manoj Kumar, Rajdeep Singh and Santosh Kumar

FABRICATION AND CHARACTERIZATION OF AA6082-T6 PRODUCED BY FRICTION STIR ADDITIVE MANUFACTURING pp. 1-6

Bhupender Singh, Sukhvir Yadav, Ashok Kumar Yadav, Abhijit Saha, Dharamveer Singh and Umakanta Choudhury

RSM-BASED STATISTICAL APPROACH TO ENHANCE THE COMPRESSIVE PERFORMANCE OF ABS P400 PARTS FABRICATED VIA FDM TECHNOLOGY pp. 1-18

Azhar Equbal, Md. Asif Equbal, Rabnawaz Ahmad, Manoj Kumar, Hrishikesh, Osama Khan, Zeinebou Yahya, Aiyeshah Alhodaib and Ashok Kumar Yadav

EXPERIMENTAL STUDY AND OPTIMIZATION OF SUBMERGED ARC WELDING PARAMETERS FOR AISI 1055 STEEL USING RESPONSE SURFACE METHODOLOGY pp. 1-16

Isaac Spurgeon Kodavaty and Ravindra Kommineni

MECHANICAL, FATIGUE, FRACTURE TOUGHNESS, AND DYNAMIC MECHANICAL ANALYSIS OF SILANE-GRAFTED KEVLAR FIBER AND JACKFRUIT RAG-EXTRACTED CELLULOSE TOUGHENED EPOXY COMPOSITE pp. 1-14

P. Dharmavarapu, Navya Sree Seelam, C. Sravanthi, Sreeram Reddy Gundeti and Ravinder Reddy Baridula

EFFECT OF CURRENT ON THE MICRO-STRUCTURE AND CORROSION PROPERTIES OF 2297 Al–LITHIUM ALLOY MAO COATING pp. 1-9

Renjie Zhu, Bo Jiang and Renguo Song

MECHANICAL, TRIBOLOGICAL, THERMAL CONDUCTIVITY AND FLAME RETARDANT BEHAVIOR OF NATURAL FIBER AND BIOMASS DERIVED BIOCHAR TOUGHENED VINYL ESTER ECO-FRIENDLY COMPOSITE: A SUSTAINABLE AUTOMOTIVE MATERIAL pp. 1-13

S. Manoj Kumar, I. Saravanan, V. Anandakrishnan and S. Vijayakumar

ADVANCEMENTS IN BIOPOLYMER-BASED NATURAL FIBER COMPOSITES: SYNTHESIS, CHARACTERIZATION, AND APPLICATIONS pp. 1-33

P. Vignesh and G. Gopalarama Subramaniyan

Volume 33, issue 03, 2026

FRICTIONAL BEHAVIOR ANALYSIS OF ABRASION-RESISTANT COMPOSITE INTERFACES FOR ENHANCED PERFORMANCE IN ATHLETIC FOOTWEAR pp. 1-13

Zhigang Chen

TRIBOELECTRIC PROPERTIES OF THERMAL SPRAY CERAMIC COATING ON HEAVY-DUTY BUILDING COMPONENTS STEEL MATRIX pp. 1-13

Zheng Cui

AN EXPERIMENTAL VALIDATION OF THE PREDICTIVE MODEL FOR GALLING PHENOMENON IN DEEP DRAWING PROCESSES pp. 1-12

D. K. Karupannasamy, R. Kamalakannan, S. V. Kailas and M. Sambathkumar

A MACHINE LEARNING-BASED PREDICTION MODEL FOR THE DISTRIBUTION AND INTERFACE STABILITY OF BANDED CARBIDES IN BEARING STEEL pp. 1-12

Xin Jia, Huili Ye, Yuming Chen, Fanfan Hu, Bo Liu, Zongming Li and Dongyao Shen

UNVEILING THE TENSILE AND FLEXURAL BEHAVIORS OF INFLORESCENCE/SISAL FIBER-FORTIFIED HYBRID EPOXY COMPOSITES pp. 1-11

G. Vaitheeswaran, K. Marimuthu, V. P. Srinivasan and L. Selvarajan

OPTIMIZATION AND EXPERIMENTAL EVALUATION OF LAP SHEAR, RAM TENSILE AND HARDNESS OF DIFFUSION BONDED AA7075/AZ80 ALLOYS USING RESPONSE SURFACE METHODOLOGY pp. 1-16

M. Chenthil, M. Arockia Jaswin and E. Shankar

SUSTAINABLE MQL MACHINING OF HOT DIE STEEL UNDER NANOGRAPHENE-REINFORCED SESAME OIL pp. 1-16

A. Balasuadhakar, S. Thirumalai Kumaran, M. Uthayakumar and S. Suresh Kumar

SIMPLIFIED PREPARATION OF TA AND TRITON X-100 FUNCTIONALIZED CNTs IN AQUEOUS SYSTEMS AND THEIR PROPERTIES ENHANCEMENT OF WATERBORNE EPOXY RESIN pp. 1-14

Kenan Yang, Han Wang, Shisheng Zhou, Bin Du and Sainan Wang

APPLICATION OF MULTI-FUNCTIONAL COMPOSITE SURFACE IN BRIDGE ENGINEERING: COLLABORATIVE OPTIMIZATION OF THERMAL REGULATION AND BEARING PERFORMANCE pp. 1-14

Lili He

Volume 33, issue 02, 2026

PREPARATION AND PERFORMANCE OF ROTATING CYLINDRICAL ELECTRODEPOSITION FOR Cu/Ni-DIAMOND COMPOSITE COATING pp. 1-6

Xiaoli Wang, Ziyi Zhao, Xin Zhou, Lei Huang, Xin Bao and Qian Zhang

THE EFFECTS OF INTERMETALLIC COMPOUNDS IN ULTRASONIC-ASSISTED Sn SOLDERING OF Mg/Al ALLOYS pp. 1-6

Yingzong Liu, Jinzhe Cui, Yuanxing Li, Hui Chen and Zongtao Zhu

GRAPHENE/ALUMINUM COMPOSITES FABRICATED BY FRICTION STIR PROCESSING: MECHANICAL PROPERTIES AND PRECIPITATE EVOLUTION pp. 1-6

Yuan Gao, Shujin Chen and Yang Xu

MICROSTRUCTURE AND PROPERTIES OF CARBON SOL-REINFORCED Ni–P/C FILM pp. 1-6

Zhen He, Dongdong Zhang, Songlin Zheng, Jingyi Tan, Zihan Liu, Luyuan Chen and Yuxin Wang

FEMTOSECOND LASER FABRICATION OF HIGH-PERFORMANCE ANTIBACTERIAL MICRO-NANOSTRUCTURES ON TITANIUM ALLOY pp. 1-6

Caizhen Yao, Siyu Wu, Xinxiang Miao, Chenzhuo Wang and Xiaodong Jiang

SOLIDAGO CANADENSIS-DERIVED NITROGEN/PHOSPHORUS CO-DOPED HARD CARBON AS ADVANCED ANODE MATERIAL FOR SODIUM-ION BATTERIES pp. 1-6

Jiaming Liu, Yuqian Wei, Jingyi Tan, Lingpei Hou, Yunfei Song and Zhen He

EFFECTS OF POLYMER COATING ON THE STRUCTURE OF CORE–SHELL PARTICLES AND MECHANICAL PERFORMANCE OF COMPRESSED BULK MATERIALS pp. 1-6

Zhiming Jin, Hailong He, Yajun Zhang, Guang Cheng and Haoze Chen

PLASMA NITRIDING OF SELECTIVE LASER MELTED Ti6AL4V ALLOY AFTER HOT ISOSTATIC PRESSING TREATMENT pp. 1-6

Lingli Xu, Xuqiang Tong, Jian Ren, Jiachen Yang, Xingling Shi and Yuxin Wang

A TRACE AMOUNT OF ELECTROLYTE ADDITIVE TO ENHANCE THE LONG-CYCLE PERFORMANCE OF AQUEOUS ZINC ION BATTERIES pp. 1-7

Yu Ding, Tan Du, Qigong Teng, Lun Li, Li Yin and Yuxin Wang

EFFECT OF Ni/La RATIO ON PHASE STRUCTURE AND ELECTROCHEMICAL PROPERTIES OF A5B19-TYPE La4MgNi19 HYDROGEN STORAGE ALLOY pp. 1-5

Yuyang Zhou, Rongming Xu, Tianming Zhao and Fansong Wei

EFFECT OF SINTERING TIME ON PHASE STRUCTURE AND ELECTROCHEMICAL PROPERTIES OF La–Mg–Ni-BASED HYDROGEN STORAGE ALLOYS pp. 1-5

Chenyao Liu, Rongming Xu, Haoli Mou and Fansong Wei

STUDY ON PHASE STRUCTURE AND ELECTROCHEMICAL PROPERTIES OF La–Mg–Ni-BASED HYDROGEN STORAGE ALLOY BY HIGH-TEMPERATURE SINTERING pp. 1-5

Huixin Liu, Jiayi Song, Fei Song and Fansong Wei

ENHANCEMENT OF HYDROGEN EVOLUTION REACTION BY HEATING THE ELECTROLYTE WITH SOLAR RADIATION pp. 1-5

Mengyu Gao, Jincheng Yu, Yang Si, Fei Chen, Xinghua Zhan and Wei Gao

HIGH-SOLID-LOADING, LOW-VISCOSITY PHOTOSENSITIVE Al2O3/SiO2 CERAMIC SLURRY FOR STEREOLITHOGRAPHY-BASED ADDITIVE MANUFACTURING pp. 1-5

Yu Yan, Xu Yang, Yiqiang He, Jinsong Chen, Hang Gu and Yunfei Ding

EFFECT OF HOLDING TIME ON THE DEPLETION BEHAVIOR OF Mn DURING VACUUM SINTERING OF Fe–Al–Mn POWDER COMPACTS pp. 1-5

Zhuoxuan Liu, Weijin Wang, Hui Wang, Enpeng Guo and Zhigang Xu

Volume 33, issue 01, 2026

PERFORMANCE ENHANCEMENT OF BRASS EDM ELECTRODES WITH CRYOGENIC TREATMENT WHILE MACHINING THE COLD WORK STEEL AISI D2 pp. 1-12

Fatih Hayati Çakir and Ferhat Ceritbinmez

A REVIEW ON THE MECHANICAL AND TRIBOLOGICAL PROPERTIES OF THERMALLY SPRAYED HYDROXYAPATITE COATINGS FOR BIOMEDICAL IMPLANT MATERIALS pp. 1-32

Gaurav Bafila, Amrinder Mehta and Hitesh Vasudev

RESEARCH ON FEATURE EXTRACTION ALGORITHM OF OIL PAINTING ARTISTIC STYLE BASED ON EMOTIONAL EXPRESSION pp. 1-8

Xianhui Huang, Banruo Xiao, Xingyu Zhong and Yi Wang

STRUCTURAL CHANGES IN CORTICAL BONE AFTER BOMBARDMENT WITH LOW-ENERGY HYDROGEN IONS pp. 1-8

O. S. Desouky, A. M. Abdelreheem, S. M. El-Marakby and N. S. Selim

GREEN SYNTHESIS, CHARACTERIZATION AND PHOTOCATALYTIC ACTIVITY OF NEW PHOTOCATALYST SrCo2O4 UNDER VISIBLE LIGHT IRRADIATION pp. 1-9

Torkia Boumethred, Hadj Benhebal, Ouardia Sebbah, Samir Kadi, Julien G. Mahy and Stã‰phanie D. Lambert

MICROSTRUCTURE AND WEAR BEHAVIOR CHARACTERIZATION OF STIR-CAST ALUMINUM 6063 ALLOY AND ITS FOAM: A COMPARATIVE STUDY pp. 1-14

Ali Nawaz and Sushila Rani

CHARACTERIZATION OF SURFACE, SUBSURFACE DAMAGE AND THEIR EFFECT ON FATIGUE LIFE AFTER MACHINING OF AEROSPACE-GRADE ALUMINUM ALLOY (Al 6082-T6) pp. 1-14

Muhammad Jahanzeb Zia, Muhammad Umer Khan Mughal, Farhan Ali, Saad Murtaza, Umair Khan, Altaf Hossain Molla, Saeed H. Moghtaderi, El-Sayed M. Sherif and Ioan Pop

OPTIMUM LEARNING MODEL FOR TEMPERATURE PROFILE PREDICTION IN ADDITIVE MANUFACTURING PROCESS pp. 1-16

Shaikh Tauseef Ahmed, Amol D. Lokhande and R. Sayyad Shafik

EFFECT OF TiC ADDITION ON MICROSTRUCTURE AND PROPERTIES OF LASER CLADDING AlCoCrFeNi2.1 COATINGS ON H13 STEEL pp. 1-10

Chu Yang, Cainian Jing, Ning Li, Junjie Xu, Zejiao Liu, Tao Lin, Jingrui Zhao and Weimin Guo