Surface Review and Letters (SRL)

1994 - 2025

Current editor(s): S Y Tong

From World Scientific Publishing Co. Pte. Ltd.
Bibliographic data for series maintained by Tai Tone Lim ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 27, issue 12, 2020

MORPHOLOGIES OF SILVER NANOPARTICLES (Ag NPs) SYNTHESIZED BY HYDROTHERMAL AND LASER ABLATION TECHNIQUES pp. 1-7

Rehana Shahid, Sidra Khalid and Shamaila Shahzadi

2024 ALUMINUM OXIDE FILMS PREPARED BY THE INNOVATIVE AND ENVIRONMENT-FRIENDLY OXIDATION TECHNOLOGY pp. 1-7

Yundan Yu, Hongliang Ge, Guoying Wei, Li Jiang and Dong Zhang

ROLE OF FRICTION ENERGY AND TRIBO-REDUCTION IN ABRASIVE WEAR OF ALUMINA–TITANIA COATINGS pp. 1-16

Sanket Mehar, S. G. Sapate, N. Vashishtha and P. Bagde

SELECTED BIS-THIADIAZOLE: SYNTHESIS AND CORROSION INHIBITION STUDIES ON MILD STEEL IN HCL ENVIRONMENT pp. 1-5

Abbas Z. Salman, Qusay A. Jawad, Khalid S. Ridah, Lina M. Shaker and Ahmed A. Al-Amiery

LASER SURFACE REINFORCEMENT OF THE Ti/Al TIG WELDED JOINT pp. 1-5

Zhiyun Ye, Jianing Li, Juan Wang, Shubo Xu, Cainian Jing, Yanhua Zhao, Guanchao Li, Xinzhu Gan, Fukun Ma and Fusheng Yu

EFFECT OF LOW-ENERGY OXYGEN ION BEAM TREATMENT ON THE STRUCTURAL AND PHYSICAL PROPERTIES OF ZnO THIN FILMS pp. 1-13

A. Abdel-Galil, A. Atta and M. R. Balboul

ULTRASONIC SPRAY-ASSISTED CVD GROWTH OF HIGHLY TRANSPARENT AND CONDUCTIVE ALUMINUM-DOPED ZnO pp. 1-13

Y. Khaaissa, K. Fathi, A. Talbi, K. Nouneh, K. El Mabrouk and A. Taleb

A REVIEW OF RECENT METHODS FOR TOOL WEAR REDUCTION IN ELECTRICAL DISCHARGE MACHINING pp. 1-20

Amoljit Singh Gill, Sanjeev Kumar, Jujhar Singh, Vivek Aggarwal and Shubham Sharma

HONEYCOMB-LIKE MESOPOROUS g-C3N4 FOR ELEMENTAL MERCURY REMOVAL FROM SIMULATED FLUE GAS pp. 1-9

Dongjing Liu, Zhen Zhang, Liang Liu and Jiang Wu

INVESTIGATION OF SOME PROPERTIES OF ZINC-NICKEL ALLOY PLATING WITH TRIETHANOLAMINE, p-AMINOBENZENESULFONIC ACID, AND GELATINE pp. 1-9

Ahmet Ozan Gezerman

EFFECT OF TIO2 PARTICLES ON THE MECHANICAL AND MICROSTRUCTURAL EVOLUTION OF HYBRID ALUMINUM-BASED COMPOSITES FABRICATED BY WARB pp. 1-9

Mohammad Heydari Vini and Saeed Daneshmand

RESEARCH STATUS OF DRY FRICTION BEHAVIOR OF METALLIC MATERIALS: A BRIEF REVIEW pp. 1-23

Shuo Yuan, Naiming Lin, Qunfeng Zeng, Hongxia Zhang, Zhenxia Wang, Linhai Tian, Lin Qin, Zhihua Wang, Bin Tang and Yucheng Wu

ABRASIVE WEAR BEHAVIOR OF NITRIDED TEXTURED TITANIUM pp. 1-8

Xingliang Li, Wen Yue, Jiajie Kang, Lina Zhu, Bin Tian, Dingshun She and Chengbiao Wang

EFFECTS OF B4C AND CR3C2 ON MICROSTRUCTURE AND PROPERTIES OF LASER CLADDING CO-BASED ALLOY COATINGS pp. 1-10

Yufan Sun, Hanguang Fu, Shuangye Chen, Xuelong Ping, Shuting Sun, Xingye Guo and Jian Lin

EFFECT OF BORON CONTENT ON HIGH-TEMPERATURE OXIDATION RESISTANCE OF B-BEARING HIGH-SPEED STEEL pp. 1-15

Yinghua Lin, Hui Li, Jiang Ju, Changchun Jiang, Yongping Lei and Hanguang Fu

Volume 27, issue 11, 2020

HAFNIUM AND NITROGEN INTERACTION AT Hf/GaN(0001) INTERFACE pp. 1-4

Rafał Lewandków, Radosław Wasielewski and Piotr Mazur

PREPARATION AND CHARACTERISTICS OF CO-DOPED HYDROXYAPATITE BIOMIMETIC COATINGS ON PRETREATED Ti6Al4V ALLOY pp. 1-14

Tugce Hacioglu, Aysen Tezcaner, Sherif Abbas and Zafer Evis

SIMULATION OF SURFACE CHARGE DISSIPATION OF INSULATING BACKSHEETS FOR FLEXIBLE PHOTOVOLTAIC MODULE UNDER VARIOUS TEMPERATURE CONDITIONS pp. 1-9

Jia-Wei Zhang, Tian-Hao Li and Wei Zhang

EXPERIMENTAL INVESTIGATION OF EFFECT OF CRYO-TREATMENT ON MICROMILLING OF INCONEL 718 pp. 1-9

Padmaja Tripathy and Kalipada Maity

SIMULATION OF BORON DIFFUSION IN THE NEAR-SURFACE REGION OF SILICON SUBSTRATE pp. 1-6

O. I. Velichko

BIOMEDICAL APPLICATIONS OF ELECTROSPUN NANOFIBERS pp. 1-11

Zhang Yancong, Dou Linbo, Ma Ning, Wu Fuhua and Niu Jincheng

THE EFFECT OF ALUMINA NANOPARTICLES ADDITION ON HIGH-TEMPERATURE WEAR BEHAVIOR OF INTERMETALLIC IRON ALUMINIDE PRODUCED BY THE SPARK PLASMA SINTERING PROCESS pp. 1-11

Hamid Ghanbari Adivi, Iman Ebrahimzadeh, Morteza Hadi and Morteza Tayebi

ANTI-WEAR PERFORMANCE OF POLISHED MICROCRYSTALLINE DIAMOND FILMS SLIDING AGAINST Si3N4 UNDER WATER LUBRICATION pp. 1-8

Yu-Xiao Cui, Yuanping He, Chunhui Ji, Bin Lin and Dawei Zhang

MORPHOLOGICAL, STRUCTURAL AND OPTICAL CHARACTERIZATIONS OF Zn-DOPED CdS BUFFER LAYER ELABORATED BY CHEMICAL BATH DEPOSITION pp. 1-10

H. Cheriet, H. Moualkia, R. Barille, M. Zaabat, O. Mahroua and M. Trari

Co(OH)2 ELECTROCATALYST DECORATED ON TiO2 FILM FOR ENHANCED PHOTOELECTROCATALYTIC WATER OXIDATION pp. 1-7

Hongxia Li, Chao Yang, Jian Zhang, Xianguo Liu and Xuefeng Zhang

INCORPORATION OF MULTI-WALLED CARBON NANOTUBES INTO OXIDE LAYER FORMED ON AL ALLOY BY PLASMA ELECTROLYTIC OXIDATION pp. 1-7

Koangyong Hyun, Jung-Hyung Lee and Seong-Jong Kim

CORROSION BEHAVIOR OF Ti–Al–N COATING MODIFIED ON CARBON STEEL PREPARED AT DIFFERENT TEMPERATURES pp. 1-7

Chengqun Pan, Yulin Li and Qingdong Zhong

MACROCYCLE RING AND PERIPHERAL GROUP SIZES-DEPENDENT VAPOR SENSING PROPERTY OF COPPER PHTHALOCYANINE THIN FILMS pp. 1-12

Nur Elmas Duran and İnci̇ Çapan

Cu–W FILM STRUCTURE INFLUENCED BY Ar+ ENERGY AND LOW-ENERGY BEAM FLOW BOMBARD DURING PREPARATION BY TWO-ION-BEAM SPUTTERING pp. 1-5

Yong-Ping Ai and Shi-Kun Xie

5,5-DIPHENYL-2-THIOXOIMIDAZOLIDIN-4-ONE METHODOLOGICAL MECHANISM TO CORROSION INHIBITION FOR MILD STEEL DISSOLUTION IN HCL: DFTS, MOLECULAR DYNAMICS AND EXPERIMENTAL PROCEDURES pp. 1-17

R. Nabah, F. Benhiba, T. Laabaissi, H. Zarrok, M. Cherkaoui, H. Oudda, Y. Ramli, I. Warad and A. Zarrouk

Volume 27, issue 10, 2020

WEAR PROPERTIES AND CHARACTERIZATION OF LASER-DEPOSITED NI-BASE COMPOSITES ON 304 STAINLESS STEEL pp. 1-6

Zhiyuan Liu, Guanchao Li, Jianing Li, Mengzhen Wang, Huijun Yu and Chuanzhong Chen

GENETIC ALGORITHM-ASSISTED ARTIFICIAL NEURAL NETWORK FOR THE ESTIMATION OF DRILLING PARAMETERS OF MAGNESIUM AZ91 IN VERTICAL MILLING MACHINE pp. 1-15

M. Varatharajulu, G. Jayaprakash, N. Baskar and A. Saravanan

PULSE ELECTRODEPOSITED NANO-SIZED Ni–AlN THIN FILMS: PREPARATION AND CORROSION RESISTANCE PREDICTION USING BACKWARD PROPAGATION NETWORK MODEL pp. 1-9

Liang Zeng, Chunyang Ma, Hanrui Zuo, Fafeng Xia and Qiang Li

ANALYSIS OF WEAR BEHAVIOR OF A NOVEL MAGNESIUM METAL–METAL COMPOSITE pp. 1-9

S. Sathish, V. Anandakrishnan and Manoj Gupta

EVALUATİON OF B4C/Tİ COATİNG LAYER, İNVESTİGATİON OF ABRASİVE WEAR BEHAVİORS USİNG TAGUCHİ TECHNİQUE AND RESPONSE SURFACE METHODOLOGY pp. 1-17

Ali̇ Kaya Gur, Ceti̇n Ozay and Busra Icen

COMBINED PLASMA NITRIDING AND SURFACE TEXTURING FOR IMPROVING TRIBOLOGICAL PERFORMANCE OF 316 STAINLESS STEEL pp. 1-17

Zhiqi Liu, Huanhuan Wang, Naiming Lin and Renhui Duan

AN INVESTIGATION OF RETROFITTED MASONRY-INFILLED FRAMES (RMIF) WITH HYBRID FIBERS: AN EXPERIMENTAL APPROACH pp. 1-14

P. Neelamegam and P. Suresh Kumar

EVALUATION OF THE GRAPHENE NANOSHEETS AS GAS SENSOR FOR NH3 VIA ELECTRICAL PROPERTIES pp. 1-5

Muhanad A. Ahmed, Hind Q. Mohammad Monir and Amar Al-Keisy

EFFECT OF THE CALCINATION TEMPERATURE ON THE DIELECTRIC PROPERTIES OF 0.94NA0.5BI0.5TIO3–0.06BATIO3 CERAMICS pp. 1-5

Ruifang Wu, Ruijie Duan, Linlin Liang, Gang Bian and Jing Wang

SELECTIVE AREA DEPOSITION FOR PATTERN GENERATION IN EDM USING MASKING TECHNIQUE pp. 1-16

Maneswar Rahang and Promod Kumar Patowari

A SYSTEMATIC STUDY ON THE DIELECTRIC RELAXATION, ELECTRIC MODULUS AND ELECTRICAL CONDUCTIVITY OF Al/Cu:TiO2∕n-Si (MOS) STRUCTURES/CAPACITORS pp. 1-12

M. Yildirim and A. Kocyigit

PREPARATION AND CHARACTERIZATION OF ORGANIC MODIFIED CALCIUM CARBONATE BY SODIUM STEARATE (OR SODIUM OLEATE) USING WET METHOD pp. 1-12

Yu Liang, Sijia Sun, Hao Ding and Xifeng Hou

TRIBOLOGICAL AND CORROSION BEHAVIOR OF SiC/TaXC BILAYER COATINGS PREPARED ON STAINLESS STEEL SURFACE BY DOUBLE GLOW PLASMA SURFACE ALLOYING TECHNIQUE pp. 1-12

Shengwang Yu, Yueyue Wang, Jie Gao, Hongjun Hei, Rong Wang and Zhiyong He

STUDY OF FORMATION OF DEFECTS/DEFECT CLUSTERS IN NICKEL NANOWIRES pp. 1-7

Shehla Honey, Jamil Asim, Ishaq Ahmad, Tingkai Zhao, Maaza Malek and Shahzad Naseem

EFFECT OF OXIDATION TIME ON STRUCTURAL AND OPTICAL PROPERTIES OF ZNO FILMS PREPARED BY HYDROTHERMAL OXIDATION OF ELECTRODEPOSITED ZN COATING ON ITO SUBSTRATE pp. 1-7

Shakil Khan, Muhammad Iftikhar, Hafiz Waseem Ahmad Alvi, Muhammad Asim Rasheed, Abdul Faheem Khan, Abdul Waheed, Mazhar Mehmood, Attaullah Shah and Arshad Mahmood

Volume 27, issue 09, 2020

ANTICORROSION PROPERTIES OF Zn–Al–Mg–ZnO COMPOSITE COATING PREPARED BY COLD SPRAYING pp. 1-14

Xinqiang Lu, Shouren Wang, Tianying Xiong, Daosheng Wen, Gaoqi Wang and Hao Du

ANALYSIS OF EVAPORATIVE DRYING OF THIN INK FILMS USING HIGH-VELOCITY HOT-AIR IMPINGING JETS: A COMPREHENSIVE REVIEW pp. 1-21

Burak Turkan, Akin Burak Etemoglu and Muhiddin Can

STRENGTHENING THE PORE WALLS OF Al FOAMS WITH SURFACE-ALLOYING TECHNIQUE pp. 1-9

Qiang Feng, Changzhong Liao, Yuanxia Peng and Shiyu Zhang

GENERATION OF SURFACE COMPOSITES AND CORROSION CHARACTERIZATION OF Mg RZ 5 ALLOY CONTAINING RARE EARTH ELEMENTS pp. 1-11

G. Vedabouriswaran, S. Aravindan and P. Sathya

BENIGN APPROACH OF CANTHIUM PARVIFLORUM AS A BIOINHIBITOR FOR MILD STEEL CORROSION IN 0.5 M H2SO4 MEDIUM pp. 1-11

K. A. Karthick, D. S. Bhuvaneshwari, D. Umapathi and Pandian Bothi Raja

ION BEAM IRRADIATION EFFECTS ON SURFACE MORPHOLOGY AND OPTICAL PROPERTIES OF ZnO/PVA COMPOSITES pp. 1-11

A. Atta, A. M. Abdel Reheem and E. Abdeltwab

INVESTIGATION OF SURFACE MORPHOLOGY OF DRILLED CFRP PLATES AND OPTIMIZATION OF CUTTING PARAMETERS pp. 1-8

Ömer Erkan, Gökhan Sur and Engin Nas

SURFACE-COVERED 1×3 GRATING WITH DIELECTRIC-METAL SLABS UNDER SECOND BRAGG INCIDENCE pp. 1-6

Chen Fu, Bo Wang, Wenhua Zhu, Kunhua Wen, Ziming Meng, Zhaogang Nie, Xiangjun Xing, Li Chen, Liang Lei and Jinyun Zhou

NUMERICAL STUDY ON BONDING OF PMMA NANOCHANNELS pp. 1-6

Xue Yang, Kai Chen, Zhifu Yin, Helin Zou and Tengfei Yu

PREDICTIVE MODELING OF SURFACE ROUGHNESS, MATERIAL REMOVAL RATE AND KERF USING MULTIPLE REGRESSION ANALYIS IN PLASMA ARC CUTTING PROCESS OF HARDOX AND ABREX STEEL pp. 1-12

Deepak Kumar Naik and Kalipada Maity

NANOSTRUCTURED EPOXY-BASED ANTICORROSIVE COATINGS pp. 1-7

María Teresa Ramírez-Palma, Genoveva Hernández-Padrón, José Mojica Gómez, Fernando Rojas-González and Víctor M. Castaño

NOVEL ACTIVE SCREEN PLASMA NITRIDING OF ALUMINUM USING ALUMINUM CATHODIC CAGE pp. 1-7

M. Naeem, J. C. Díaz-Guillén, Memoona Akram, Javed Iqbal, M. Y. Naz and M. Shafiq

ULTRAVIOLET ILLUMINATION RESPONSIVITY OF THE Au/n-Si DIODES WITH AND WITHOUT POLY (LINOLENIC ACID)-G-POLY (CAPROLACTONE)-G-POLY (T-BUTYL ACRYLATE) INTERFACIAL LAYER pp. 1-7

Ümi̇t Gürsel, Songül Taran, Muharrem Gökçen, Yurdagül Ari and Abdulkadi̇r Alli

EFFECTS OF SPRAY PYROLYSIS DEPOSITION PARAMETERS ON MORPHOLOGICAL, OPTICAL AND STRUCTURAL PROPERTIES OF WO3 NANOSTRUCTURED THIN FILMS pp. 1-16

Ali Akhavan Mavardiani and Mohammad Bagher Rahmani

UNSTEADY FLOW OF CASSON LIQUID FILM ON A STRETCHING SHEET WITH RADIATIVE HEAT TRANSFER pp. 1-16

R. Krishanan, S. Maity and B. S. Dandapat

Volume 27, issue 08, 2020

TRIBOLOGICAL STUDY ON SLURRY ABRASIVE WEAR BEHAVIOR OF NONWOVEN VISCOSE FABRIC COMPOSITES WITH DOE APPROACH pp. 1-11

Prabina Kumar Patnaik, Priyadarshi Tapas Ranjan Swain, Abhilash Purohit and Sandhyarani Biswas

TRIBOLOGICAL PROPERTIES OF THE CARBON AND NITROGEN-BASED HARD FILMS SLIDING AGAINST THE NICKEL-BASED SUPERALLOY pp. 1-11

X. L. Lei, B. X. Yang, Y. He and F. H. Sun

DEPOSITION OF TiAlV THIN FILMS BY PULSED LASER AND DC MAGNETRON SPUTTERING: STRUCTURAL, COMPOSITIONAL AND ELECTROCHEMICAL CORROSION STUDY pp. 1-8

A. Alkhawwam, B. Abdallah, A. K. Jazmati, M. Tootanji and F. Lahlah

EFFECT OF VARIATION IN GRAIN SIZES AND TWINNING DEFORMATION ON CRACK GROWTH BEHAVIOR IN MAGNESIUM ALLOY AZ31 pp. 1-8

Keisuke Mori, Chobin Makabe, Shin-Ichi Inoue and Shinji Ando

OPTIMIZED DEEP LEARNING WITH OPPOSITION-BASED ANT LION APPROACH FOR CRACK IDENTIFICATION OF THICK BEAMS pp. 1-10

Dasaripalle Pitchaiah and Putti Srinivasa Rao

EFFECTS OF Co CONCENTRATION ON THE STRUCTURAL AND OPTICAL PROPERTIES OF Zn1−xCoxS FILMS pp. 1-10

Shufeng Li, Li Wang, Xueqiong Su, Yong Pang, Dongwen Gao and Xiaowei Han

NUMERICAL AND THEORETICAL STUDY OF THE CASIMIR FORCE CORRECTIONS BETWEEN TWO ROUGH SURFACES pp. 1-6

H. Hassanzadeh, A. A. Masoudi, S. Hosseinabadi and M. Khorrami

PREPARATION OF MnO2 NANOPARTICLES BY A SOLUTION BASED APPROACH FOR ELECTROCHEMICAL CAPACITOR pp. 1-6

Ankur Soam and Rahul Kumar

SLURRY EROSION BEHAVIOR OF HVOF SPRAYED WC-12Co AND Cr3C2-25NiCr COATINGS DEPOSITED ON 16Cr5Ni STAINLESS STEEL pp. 1-14

Jin Du, Jianfeng Zhang, Jinkun Xiao and Chao Zhang

THIN FILM FLOW OF CNTs NANOFLUID OVER A THIN NEEDLE SURFACE pp. 1-9

Taza Gul, Malik Zaka Ullah, Khursheed J. Ansari and Iraj S. Amiri

TI-6AL-4V ALLOY FABRICATED BY LASER DIRECT DEPOSITION: DYNAMIC MECHANICAL PROPERTIES, CONSTITUTIVE MODEL, AND NUMERICAL SIMULATION pp. 1-12

Tao Wang, Weilin Qiao, Sheng Wang, Zhan Li, Hao Wang and Jianbo Lei

INVESTIGATION OF POROUS ANODIC FILM FORMATION ON AA1050 BY ELECTROCHEMICAL IMPEDANCE SPECTROSCOPY pp. 1-7

M. Danişman, M. Kocabaş, M. Curioni and N. Cansever

IMPROVING FLUORITE FLOTATION UNDER LOW TEMPERATURE AND NEUTRAL pH CONDITIONS pp. 1-7

Shuofu Li, Daozhen Gong, Wei Zhang, Genzhuang Li and Kou Jue

DETERMINATION OF THE SURFACE FUNCTIONALITY OF NANOCARBON ALLOTROPES BY BOEHM TITRATION pp. 1-7

M. Hernandez-Ortiz, H. A. Durán-Muñoz, J. D. Lozano-López, S. M. Durón, M. Galván-Valencia, Y. Estevez-Martínez, I. Ortiz-Medina, L. A. Ramírez-Hernández, O. Cruz-Domínguez and V. M. Castaño

PERFORMANCE OF pH SENSOR ELECTRODE BASED ON ZnO NRs ON FTO-GLASS SUBSTRATE pp. 1-7

Abdulqader D. Faisal, Mohammad O. Dawood, Hassan H. Hussein and Khaleel I. Hassoon

Volume 27, issue 07, 2020

AN EXPERIMENTAL STUDY ON MICROSTRUCTURE OF TUNGSTEN ALLOYS pp. 1-7

E. Demir, M. N. Mirzayev, A. B. Tuğrul, B. A. Abdurakhimov and S. İ. Karaaslan

A NEW STRUCTURE OF FLEXIBLE OLED WITH COPPER NANOWIRE ANODE AND GRAPHERE OXIDE/PEDOT: PSS ANODE BUFFER LAYER pp. 1-7

Ping Liu, Jianghao Wang, Jie Cheng, Liming Liu, Honghang Wang, Baoqing Zeng and Feng Chi

ANNEALING EFFECT ON STRUCTURAL AND OPTICAL PROPERTIES OF COPPER-DOPED BISMUTH TRIOXIDE Cu:Bi2O3 THIN FILMS pp. 1-12

Fatima Zohra Bouchareb and Nasr-Eddine Hamdadou

MICROSTRUCTURE PERFORMANCE OF La2O3-MODIFIED TUNGSTEN INERT GAS CLAD COMPOSITE COATING pp. 1-5

Mo-Lin Su, Jia-Ning Li, Fei-Hu Shan, Ke-Gao Liu and Hui-Lin Xu

SYNTHESIS AND CHARACTERIZATION OF La-DOPED ZnO (La:ZnO) FILMS FOR PHOTODETECTORS pp. 1-13

Bestoon Anwer Gozeh, Abdulkerim Karabulut, Mudhaffer M Ameen, Abdulkadir Yildiz and Fahrettin Yakuphanoğlu

PREPARATION AND ELECTRICAL PROPERTIES OF ANTIMONY-DOPED TIN OXIDE NANOPARTICLES BY TWO VARIOUS MODIFIED COPRECIPITATION METHODS pp. 1-9

Yu Guo, Shimin Liu, Dongdong Liang, Zhinuo Wang, Weiwei Jiang, Chaoqian Liu, Hualin Wang, Nan Wang, Wanyu Ding, Li Wang and Shichong Xu

EFFECT OF FAR-FIELD FLOW ON THE GROWTH OF COLUMNAR CRYSTAL IN TERNARY UNDERCOOLED MELT pp. 1-11

Hailong Fan, Mingwen Chen and Yanyan Shan

ANTI CORROSION ACTIVITY OF ETHYLENE TETRA PHOSPHONIC ACID–Cu2+ SYSTEM ON CARBON STEEL IN H2SO4 SOLUTION pp. 1-11

D. Kameli, N. Aliouane, H. Hammache-Makhloufi and L. Makhloufi

EXPERIMENTAL STUDY ON STEADY DYNAMIC FRICTION OF MWCNTs MIXED LUBRICANTS pp. 1-8

Shraddha Gondane, Arun K. Singh, Nitish Sinha and R. P. Vijayakumar

A NOVEL METHOD FOR PRODUCING NANOSTRUCTURED CdSe THIN FILM pp. 1-8

İshak Afşin Kari̇per

DOUBLE GLOW PLASMA SURFACE TITANIZING ON AISI 316 STAINLESS STEEL WITH IMPROVED WEAR RESISTANCE: EFFECTS OF PROCESS PARAMETERS pp. 1-8

Yong Ma, Naiming Lin, Qiang Liu, Jiaojuan Zou, Xiuzhou Lin, Luxia Zhang, Shengwang Yu, Bing Zhou, Boqiong Li, Lin Qin, Xiaoping Liu, Zhihua Wang and Bin Tang

TiO2/ZnO PHOTONIC CRYSTAL PREPARED BY SPRAY PYROLYSIS METHOD: APPLICATION TO MULTICHANNEL FILTER pp. 1-10

F. Kanouni, S. Amara, A. Assali, F. Arab and Q. Zou

INFLUENCE OF PROCESS PARAMETERS ON OPTICAL AND PHYSICAL PROPERTIES OF ITO THIN FILM pp. 1-10

Arezoo Moshabaki, Erfan Kadivar and Alireza Firoozifar

COMPARISON OF PERFORMANCES OF ORGANIC PHOTOVOLTAIC CELLS USING SubPc AS CENTRAL AMBIPOLAR LAYER IN TERNARY STRUCTURES AND AS ELECTRON ACCEPTOR IN BINARY STRUCTURES pp. 1-10

M. B. Siad, Z. El Jouad, A. Khelil, A. Mohammed Krarroubi, S. Morsli, G. Neculqueo, M. Addou, J. C. Bernède and L. Cattin

COMPARISON OF HOT CORROSION PERFORMANCE OF BARE AND NiCoCrAlY-COATED AUSTENITIC STAINLESS STEEL AISI 347 IN AGGRESSIVE WASTE HEAT INCINERATOR ENVIRONMENT AT 650∘C pp. 1-15

S. M. Muthu, R. V. Anant, D. Raghul, M. Ishwarya, N. Arivazhagan and M. Arivarasu

Volume 27, issue 06, 2020

PHOSPHONIC ACID MONOLAYERS FOR CORROSION PROTECTION OF COPPER: EQCM AND EIS INVESTIGATIONS pp. 1-16

Aysel Yurt and Esra Solmaz

TUNING THE ELECTRICAL PROPERTIES WITH HIGHER GAMMA-RAY IRRADIATION: POLY (METHYL METHACRYLATE)/LEAD OXIDE (PbO) COMPOSITE NANOSTRUCTURES pp. 1-5

D. Akay and S. B. Ocak

THE DIFFERENCE OF THE MOLECULAR STRUCTURES BETWEEN DEFORMED SOFT AND HARD COAL AND THEIR INFLUENCES ON THE CHARACTERISTICS OF ADSORPTION METHANE pp. 1-24

Yanwei Liu, Peibo Li, Zhiming Lu, Weiqin Zuo and Hani Mitri

NOVEL TYPE OF GRADIENT-DISTRIBUTED WIRE BEAM ELECTRODE MEASURED IN 3.5 wt.% NaCl AND ITS APPLICATION IN FAST DETECTION TECHNIQUE pp. 1-13

Yulin Li, Fanbo Yu and Qingdong Zhong

ACTIVE-POLYPHENOLIC-COMPOUNDS-RICH GREEN INHIBITOR FOR THE SURFACE PROTECTION OF LOW CARBON STEEL IN ACIDIC MEDIUM pp. 1-13

Ill-Min Chung, Venkatesan Hemapriya, Ponnusamy Kanchana, Natarajan Arunadevi, Subramanian Chitra, Seung-Hyun Kim and Mayakrishnan Prabakaran

AN APPROACH BASED ON LANDAUER–BÜTTIKER FORMALISM TO COMPUTE THE ELECTRONIC LOCALIZED STATES AT SURFACE BOUNDARIES pp. 1-20

Adel Belayadi

ELECTROCHEMICAL, DFT AND MD SIMULATION INVESTIGATIONS OF THE CORROSION INHIBITION PROPERTIES OF HETEROCYCLIC SULFIDE DERIVATIVES FOR MILD STEEL IN ACIDIC MEDIUM pp. 1-25

Imene Benmahammed, Tahar Douadi, Saifi Issaadi, Djamel Daoud and Salah Chafaa

THERMAL CONDUCTIVITY AND THERMAL AGING PERFORMANCE OF Sn WITH 0.7 wt.% Cu and VARIOUS GRAPHENE ADDITIONS pp. 1-11

Caixia Sun, Fengyun Zhang, Hongxia Zhang, Nianlong Zhang, Shouying Li, Jingjie Dai and Hailong Zhang

PROCESS PARAMETERS OPTIMIZATION FOR FRICTION VIBRATION JOINING OF POLYPROPYLENE/SPHERI GLASS COMPOSITES USING TOPSIS pp. 1-11

D. Jafrey Daniel and K. Panneerselvam

INVESTIGATION ON HIGH-TEMPERATURE CORROSION BEHAVIOR OF INCONEL 600 UNDER SO2-BEARING GAS AT 650°C pp. 1-8

Kwang-Hu Jung and Seong-Jong Kim

MICROSTRUCTURE AND WEAR PROPERTY OF Ti/C MODIFIED LAYERS ON Ti–6Al–4V SUBSTRATE pp. 1-8

Dandan Ma, Yong Ma, Ailan Fan, Yongsheng Wang, Shengwang Yu, Jie Gao, Hongjun Hei and Bin Tang

POST WELD HEAT TREATMENT OF NiTinol SHAPE MEMORY ALLOY USING LASER POWER SOURCE pp. 1-10

T. Deepan Bharathi Kannan, Govindu Tutta, P. Sathiya and T. Ramesh

EFFECTS OF Pd2+ CONCENTRATION ON THE STRUCTURAL PROPERTY OF NICKEL-PLATED PLANT FIBER NON-WOVEN SHEET pp. 1-6

Guangchao Qin, Youhao Liu, Yu Zhang, Haodong Chen, Can Ding, Junfei Liu, Bin Cheng, Zhenming Chen and Junjun Huang

INVESTIGATION OF THE WEAR CHARACTERISTICS OF THERMAL BARRIER COATING IN A BIODIESEL ENGINE pp. 1-14

Levent Urtekin and Serkan Bayaşoğlu

EFFECTS OF THE BORIDING PROCESS AND OF QUENCHING AND TEMPERING AFTER BORIDING ON THE MICROSTRUCTURE, HARDNESS AND WEAR OF AISI 5140 STEEL pp. 1-9

Osman Bican, Salih Ugur Bayca, Sule Ocak-Araz, Bunyamin Yamanel and Naci Arda Tanis

Volume 27, issue 05, 2020

ZnO-Ge MULTILAYER THIN FILM STRUCTURES DEPOSITED BY THERMAL EVAPORATION TECHNIQUE pp. 1-9

Naeem Ur-Rehman, Mazhar Mehmood, Abdul Faheem Khan, Syed Mansoor Ali and M. Ashraf

SURFACE PASSIVE FILM CHARACTERISTIC OF Q235 CARBON STEEL IN PURE MOLYBDATE SOLUTION pp. 1-9

Pei Zhang, Yijiang Chen, Huiju Huang, Yong Zhou, Fuan Yan and Guochao Nie

OPTIMIZATION OF THE MACHINING PARAMETERS IN TURNING OF HARDENED HOT WORK TOOL STEEL USING CRYOGENICALLY TREATED TOOLS pp. 1-14

Engin Nas and Nursel Altan Özbek

A NOVEL INVESTIGATION OF HEAT TRANSFER CHARACTERISTICS IN HYBRID MICRO-CHANNEL HEAT SINK STRUCTURE: OPPOSITION-BASED ANTLION OPTIMIZATION pp. 1-13

R. Deena and G. Sai Sundara Krishnan

STRUCTURE STABILITY AND ELECTRONIC PROPERTIES OF PtmIrn(m+n=8−10) AND ADSORPTION SITES OF NO ON Pt–Ir CLUSTERS AT THE DFT LEVEL pp. 1-13

Kun Gao, Xiu-Rong Zhang and Zhi-Cheng Yu

TEXTURE AND STRUCTURE VARIATION OF PEROVSKITE LaFeO3/ZSM-5 DURING HIGH-TEMPERATURE DESULFURIZATION pp. 1-10

Dongjing Liu, Weiguo Zhou and Jiang Wu

PICOSECOND LASER MICROMACHINING OF SILICON WAFER: CHARACTERIZATIONS AND ELECTRICAL PROPERTIES pp. 1-8

Zhihao Fang, Longfei Chen, Yingchun Guan and Hongyu Zheng

INFLUENCE OF SLUG FLOW ON LOCAL CORROSION OF PIPELINES pp. 1-8

Ziyan Feng and Mingwei Cui

CO2 LASER ABLATION MICROCHANNEL BASED ON KOCH FRACTAL PRINCIPLE pp. 1-6

Xueye Chen, Yue Tian and Shuai Zhang

TCAD SIMULATION AND PERFORMANCE ANALYSIS OF SINGLE AND DUAL GATE OTFTs pp. 1-7

A. D. D. Dwivedi and Pooja Kumari

HUMIDITY AND TEMPERATURE DEPENDENT CHARACTERISTICS OF Ag/SnNcCl2/Ag SURFACE TYPE MULTIFUNCTIONAL SENSOR pp. 1-7

Abdul Wajid, Muhammad Tahir, Arif, Sayyed Izaz Uddin and Fazal Wahab

PREPARATION AND CHARACTERIZATION OF CaZrO3COATING ON GRAPHITE FOR TiNi ALLOY MELTING pp. 1-7

Bin Zhan, Yue Zhang, Yunfeng Xiao, Caifen Wang and Xiangdong Zhang

HIGH-TEMPERATURE OXIDATION OF HOT-DIP ALUMINIZED P23 STEEL pp. 1-7

Dong Bok Lee, Junhee Hahn and Muhammad Ali Abro

MECHANISM OF INHIBITION OF GALVANIC CORROSION BETWEEN CARBON STEEL AND STAINLESS STEEL BY SODIUM N-LAUROYL SARCOSINATE AND ZINC SULFATE pp. 1-12

Shuai Hu, Wenfeng Jia, Zhenyu Chen and Xingpeng Guo

STRUCTURAL AND MORPHOLOGICAL PROPERTIES OF ANNEALED MoO3 FILMS ON DIFFERENT SUBSTRATES pp. 1-12

Syed Hammad Raza, Naveed Afzal, Mohsin Rafique, M. Imran and R. Ahmad

Volume 27, issue 04, 2020

IMPROVEMENT OF WEAR RESISTANCE OF SHREDDER BLADES USED IN A REFUSE-DERIVED FUEL (RDF) FACILITY BY PLASMA NITRIDING pp. 1-13

Hakan Aydin and Furkan Bostanci

EFFECT OF ELECTRODE MATERIAL ON CUT QUALITIES OF SHAPE MEMORY ALLOY DURING WEDM: A COMPARATIVE STUDY pp. 1-17

Himadri Majumder and Kalipada Maity

AMORPHOUS PbSe THIN FILM PRODUCED BY CHEMICAL BATH DEPOSITION AT pH OF 5–8 pp. 1-5

İ. A. Kari̇per

STRUCTURAL AND OPTICAL PROPERTIES OF UNDOPED AND SILVER, LITHIUM AND COBALT-DOPED ZnO THIN FILMS pp. 1-7

Fatma Meydaneri̇ Tezel and İ. Afşin Kari̇per

TRIBOLOGICAL EVALUATION OF AL/TiB2/NANO-GR HYBRID COMPOSITES EXPOSED TO ELEVATED TEMPERATURE pp. 1-15

Suswagata Poria, Goutam Sutradhar and Prasanta Sahoo

INFLUENCE OF POST-LASER PROCESSING ON THE MECHANICAL AND TRIBOLOGICAL PROPERTIES OF PVD TiAlN COATINGS pp. 1-15

Kedong Zhang, Jianxin Deng, Youqiang Xing and Xuhong Guo

SYNTHESIS OF IODINE DOPED n-BMA THIN FILMS VIA PLASMA POLYMERIZATION TECHNIQUE: EFFECT ON OPTICAL PROPERTIES pp. 1-6

Rahima Nasrin, Humayun Kabir and A. H. Bhuiyan

PREDICTIVE ANALYSIS OF SURFACE FINISH IN GAS-ASSISTED ELECTRICAL DISCHARGE MACHINING USING STATISTICAL AND SOFT COMPUTING TECHNIQUES pp. 1-11

Nishant K. Singh, Sanjeev Kumar, Yashvir Singh and Varun Sharma

HALF-METALLICITY OF BULK AND (001) SURFACE IN THE Co2FeGa HEUSLER COMPOUND:A THEORETICAL STUDY pp. 1-8

Moaid K. Hussain

SIMULATION MODEL OF THE GROWTH KINETICS OF Fe2B LAYERS WITH CONSIDERATION OF THE BORIDE INCUBATION TIME EFFECT pp. 1-10

Bendaoud Mebarek, Mourad Keddam and Hamza Boussebha

MULTICOMPONENT Al-BRONZE COATINGS THERMALLY SPRAYED ONTO TIN BRONZE SUBSTRATE: MICROSTRUCTURAL, MECHANICAL AND CORROSION CHARACTERIZATION IN A 3.5% NaCl SOLUTION pp. 1-10

T. Mana, A. Ati, B. Zaid and N. Souami

INFLUENCE OF CEO2 ADDITION AND SCANNING SPEED ON MICROSTRUCTURE AND TRIBOLOGICAL BEHAVIOR OF LASER-CLAD Ti-Co REINFORCED COATINGS ON Ti-6Al-4V ALLOY pp. 1-14

O. S. Adesina, G. A. Farotade, A. P. I. Popoola and D. T. Oloruntoba

INSIGHT INTO STRUCTURAL, OPTICAL AND ELECTRICAL PROPERTIES OF COBALT OXIDE Co3O4 THIN FILM pp. 1-9

K. M. E. Boureguig, H. Tabet-Derraz and T. Seddik

NOVEL NATURAL DYE EXTRACTION METHODS AND MORDANTS FOR TEXTILE APPLICATIONS pp. 1-9

Tayyab Naveed, Faisal Rehman, Noor Sanbhal, Babar Aijaz Ali, Zhong Yueqi, Omer Farooq and Wei Wang

(Cu, Ag)-DOPED ZnS WITH WIDE VISIBLE LIGHT RANGE ABSORPTION FOR WATER SPLITTING: A THEORETICAL AND EXPERIMENTAL STUDY pp. 1-9

Xiaobo Chen, Weiwei Liu, Zhihai Zhang, Wen Yang and Peizhi Yang

Volume 27, issue 03, 2020

PHOTOCATALYTIC ACTIVITY AND WETTABILITY OF RGO/TiO2 NANOCOMPOSITES PREPARED BY ELECTROPHORETIC CO-DEPOSITION pp. 1-7

E. Noormohammadi and S. Sanjabi

AES CHARACTERIZATION OF CONSTITUENTS’ OXIDATION STATE IN SPECTRALLY SELECTIVE TITANIUM-OXYNITRIDE COATINGS ON METALS FOR HIGH EFFICIENT SOLAR ABSORBERS pp. 1-7

Darja Steiner Petrovič, Anka Trajkovska Petkoska, Ilija Nasov and Djordje Mandrino

IMPROVED NITRIDING CAPABILITY OF NONALLOYED STEELS ASSISTED WITH ACTIVE SCREEN PLASMA TREATMENT pp. 1-5

M. Naeem, H. A. Raza, M. Shafiq, Farhat Shabbir, Javed Iqbal, J. C. Díaz-Guillén and C. M. Lopez-Badillo

ANALYSIS AND CHARACTERIZATION OF FORMING BEHAVIOR ON DISSIMILAR JOINTS OF AA5052-O TO AA6061-T6 USING UNDERWATER FRICTION STIR WELDING pp. 1-14

K. Tejonadha Babu, S. Muthukumaran, C. Sathiya Narayanan and C. H. Bharat Kumar

EXPERIMENTAL STUDY OF SURFACE ROUGHNESS AND TAPER ANGLE IN ABRASIVE WATER JET MACHINING OF 7075 ALUMINUM COMPOSITE USING RESPONSE SURFACE METHODOLOGY pp. 1-9

A. Shanmugam, K. Krishnamurthy and T. Mohanraj

OPTICAL, STRUCTURAL, AND MORPHOLOGICAL PROPERTIES OF UNDOPED AND EUROPIUM DOPED ZnO pp. 1-9

F. Touri, A. Sahari, A. Zouaoui, F. Deflorian and L. Guerbous

THE STUDY ON THE O2 PLASMA TREATMENT FOR BONDING OF SU-8 LAYERS pp. 1-9

Xue Yang, Xinyan Jiang, Zhifu Yin, Dong F. Wang, Tengfei Yu, Lei Sun and Helin Zou

ELECTROCATALYTIC ACTIVITY OF Ni–Mn–Sn ALLOY FOAMS FOR OXYGEN EVOLUTION REACTION (OER) pp. 1-9

Niloofar Taherian and Sohrab Sanjabi

ZnO/Ag NANOPARTICLE-DECORATED SINGLE-WALLED CARBON NANOTUBES (SWCNTs) AND THEIR PROPERTIES pp. 1-9

Mohammad R. Mohammad, Duha S. Ahmed and Mustafa K. A. Mohammed

INFLUENCE OF Cu CONTENT ON PREFERRED ORIENTATION AND PROPERTIES OF CrCuN COATINGS pp. 1-8

Shuyong Tan, Xuhai Zhang, Rui Zhen and Zhangzhong Wang

AlxGa1−xN GROWTH BY Si/N TREATMENT OF SAPPHIRE SUBSTRATE: COMPARISON WITH OTHERS GROWTH TECHNIQUES pp. 1-8

I. Halidou, A. Touré and B. El Jani

INFLUENCE OF THE MECHANICAL PROPERTIES ON THE WEAR BEHAVIOR OF a-C FILMS: AN ENERGY DESCRIPTION pp. 1-8

Li Guo, Mingjiong Zhang, Jianqiang Hu, Zhibin Lu, Guangan Zhang and Xin Xu

EFFECT OF SUBSTRATE TEMPERATURE ON THE STRUCTURAL AND OPTICAL PROPERTIES OF NiTsPc THIN FILMS pp. 1-8

Mohammed Yarub Hani, Addnan H. Al-Aarajiy and Ahmed M. Abdul-Lettif

EFFECT OF ANODIC AND CATHODIC CURRENT DENSITIES ON THE CAVITATION DAMAGE CHARACTERISTICS OF ALUMINUM ALLOY IN SEAWATER pp. 1-8

Jung-Hyung Lee, Ye-Jin Yang and Seong-Jong Kim

SYNTHESIS, CHARACTERIZATION AND THERMAL PROPERTIES OF 2,2′-DIBENZIMIDAZOLYL BUTANE AS A NOVEL CORROSION INHIBITORS FOR MILD STEEL IN SULFURIC ACID pp. 1-15

H. El Aadad, M. Galai, A. Chahine and M. Ebn Touhami

Volume 27, issue 02, 2020

TRIBOLOGICAL PERFORMANCE OF MODIFIED FLOCCULENT GRAPHITE AS LUBRICANT ADDITIVES pp. 1-14

Chuan Yi Xue, Shou Ren Wang, Jin Feng Leng, Yong Wang and Gao Qi Wang

ANALYSIS OF LIQUID MEDIATED CONTACT OF GLASS COLLOIDAL PARTICLE WITH POLYSTYRENE COATED SURFACE pp. 1-6

Khurshid Ahmad, Abdus Saboor Ahmad, Muhammad Hassan, Zubair Ahmad, Xuezeng Zhao and Yunlu Pan

FLAME SYNTHESIS OF MoO3 FILMS AND THEIR FLAME REDUCTION TO MoO3−x FILMS FOR NIR-SHIELDING APPLICATIONS pp. 1-6

M. A. Hosseini, M. Ranjbar and A. R. Shafieyan

ACCURACY AND SURFACE INTEGRITY ANALYSIS OF MICRO HOLES DRILLED ON HASTELLOY-X ALLOY USING A LASER SOURCE WITH OPTIMIZATION pp. 1-15

P. V. Sivaprasad and A. Noorul Haq

TEST STUDY ON THE BEST PASTING LAYER OF FRP REINFORCED CONCRETE pp. 1-8

Xiangqian Fan and Jueding Liu

A NOVEL METHOD FOR STUDYING THE CORROSION RESISTANCE AND MICROSTRUCTURE OF ENAMEL COATING MODIFIED ON HIGH-STRENGTH STEEL IN 3.5 wt.% NaCl SOLUTION pp. 1-10

Yulin Li, Junjie Wang and Qingdong Zhong

MICROSTRUCTURE AND MECHANICAL PROPERTY CHARACTERIZATION OF MULTILAYER FREE-STANDING DIAMOND/Mo FILMS pp. 1-10

Liangliang Li, Hongjun Hei, Yong Ma, Ke Zheng, Jie Gao, Bing Zhou, Zhiyong He, Shengwang Yu and Bin Tang

DEFORMATION ANALYSIS OF H62 Cu ALLOY FOIL SUBJECTED TO MULTI-PULSED LASER DYNAMIC FORMING: SIMULATIONS pp. 1-10

Jie Geng, Fengze Dai, Xudong Ren, Jinzhong Lu and Shu Huang

INFLUENCE OF EMBEDDED TUNGSTEN PARTICLES ON MECHANICAL BEHAVIORS OF CVD DIAMOND COATING pp. 1-11

Yao Wang, Ping He, Yingchao Chen, Musen Liu, Cheng Li, Naichao Chen, Jianxing Ren and Quanjun Zhu

INTERFACIAL AND TENSILE PROPERTIES OF HYBRID FRP COMPOSITES USING DNN STRUCTURE WITH OPTIMIZATION MODEL pp. 1-11

Ahmed Abdul Baseer, D. V. Ravi Shankar and M. Manzoor Hussain

A NOVEL STUDY ON SURFACE MODIFICATION OF PALMYRA FIBERS FOR ENHANCING MECHANICAL AND THERMAL PROPERTIES pp. 1-11

T. Raghavendra and K. Panneerselvam

TAILORING THE ELECTRICAL AND OPTICAL PROPERTIES OF CARBON NANOTUBE REINFORCED TRANSPARENT TiO2 COMPOSITES BY VARYING NANOTUBE CONCENTRATIONS pp. 1-7

Bengü Özuğur Uysal, Ümit Özlem Akkaya Arier and Önder Pekcan

FILMS SPIN-COATED WITH GALLIC ACID AND THE DETECTION OF SPUN FILMS AGAINST VOLATILE ORGANIC COMPOUNDS pp. 1-7

Si̇bel Şen

FAILURE ANALYSIS AND PROCESS PARAMETER INFLUENCE ON MECHANICAL AND METALLURGICAL BEHAVIOR OF FRICTION STIR WELDED AA2219-T87 JOINTS pp. 1-12

R. Dinesh Kumar, S. Muthukumaran, T. Venkateswaran, Vincent Xavier and D. Sivakumar

A SIMPLE METHOD FOR DETERMINING A THICKNESS OF METAL BASED ON LOCK-IN THERMOGRAPHY pp. 1-5

A. Zrhaiba, A. Balouki, A. Elhassnaoui, S. Yadir, H. Halloua and S. Sahnoun

Volume 27, issue 01, 2020

STRUCTURAL, FERROELECTRIC AND ENERGY-STORAGE PROPERTIES OF LEAD-FREE Zr-DOPED Bi0.5(Na0.80K0.20)0.5TiO3 FILMS pp. 1-9

Ngo Duc Quan, Chu T. Thanh Huong, Nguyen T. Hong Phuong, Nguyen van Hong, Vu Ngoc Hung and Minh-Duc Nguyen

ELECTRONIC AND STRUCTURAL PROPERTIES OF Si–Gd–O ELECTRON EMITTER pp. 1-9

M. I. Fedorchenko, P. V. Melnik, M. G. Nakhodkin, O. I. Gudymenko, V. P. Kladko and P. M. Lytvyn

A NUMERICAL STUDY ON THE UNDERWATER APPARENT CONTACT ANGLE OF OIL DROPLETS ON MICROSTRUCTURE SURFACE pp. 1-9

Hyonchol Choe, Songhak Kim, Cholhuan O, Jisong Zong and Wonchol Song

INFLUENCE OF MOLYBDENUM DISULFIDE PARTICLE SIZE ON FRICTION AND WEAR CHARACTERISTICS OF NON-ASBESTOS-BASED COPPER-FREE BRAKE FRICTION COMPOSITES pp. 1-20

R. Vijay, D. Lenin Singaravelu and Peter Filip

INVESTIGATION OF CONDUCTIVITY CHARACTERISTICS OF Zn–In–Se THIN FILMS pp. 1-11

H. H. Gullu and M. Parlak

LASER SURFACE HARDENING OF AISI 1055 STEEL IN WATER SUBMERGED CONDITION pp. 1-8

Niroj Maharjan, Wei Zhou, Yu Zhou and Naien Wu

CONTROLLED MORPHOLOGICAL EVOLUTIONS OF SILVER FILMS ON COMPLIANT SUBSTRATES BY TUNING MECHANICAL STRAIN pp. 1-8

Yadong Sun, Senjiang Yu, Yaopeng Du, Hong Zhou and Miaogen Chen

INFLUENCE OF LASER BORIDING ON THE FRICTION AND WEAR OF SLIDING COUPLES WITH BEARING ALLOYS pp. 1-10

Kazimiera Dudek, Wojciech Szczypinski-Sala and Janusz Lubas

GROWTH STRUCTURE EFFECT ON THE CORROSION RESISTANCE AND MECHANICAL PROPERTIES OF CrNx COATING pp. 1-10

Jiaojiao Du, Haibin Zhou, Caixia Sun, Haijiang Kou, Zhongwei Ma, Xiaoyan Wang and Jingjie Dai

INFLUENCE OF ARGON GAS AND COPPER THICKNESS ON THE OPTOELECTRONICAL AND STRUCTURAL PROPERTIES OF AlZnO/Cu/AlZnO THIN FILM pp. 1-6

Arezoo Moshabaki, Erfan Kadivar and Alireza Firoozifar

MICROSTRUCTURE ANALYSIS OF MOSO BAMBOO (Phyllostachys pubescens MAZEL) SURFACE AFTER UV RADIATION pp. 1-6

Haixia Yu, Xin Pan, Weiming Yang, Wenfu Zhang and Xiaowei Zhuang

FINITE ELEMENT ANALYSIS OF EQUIVALENT STRESS INDUCED BY SURFACE PUNCHING SEVERE DEFORMATION AIMED AT ALLOYING ON LOW-CARBON STEEL pp. 1-6

Xiangyang Mao, Jianyu Sun, Hongxing Wang, Xiuming Zhao and Zhangzhong Wang

EVALUATION OF SURFACE ROUGHNESS PRODUCED BY NANOCUTTING COPPER STRUCTURE USING A LEAST SQUARE MEAN METHOD pp. 1-12

Chunhui Ji, Shuangqiu Sun, Bin Lin and Tianyi Sui

RESEARCH ON SURFACE STRENGTHENING INDUCED BY ULTRASONIC PUNCHING TO IMPROVE MECHANICAL PROPERTIES AND CORROSION RESISTANCE FOR SHAFT PARTS pp. 1-7

Yang-Xin Wang, Zhou Yang, Jian-Wei Dai, Xiu-Ming Zhao and Xiang-Yang Mao

INFLUENCE OF ROTATION RATE ON OPTICAL PROPERTIES OF ZnS THIN FILMS ANALYZED BY SPECTROSCOPIC ELLIPSOMETRY METHOD pp. 1-7

Batool Ahmadi Khanegahi and Hassan Sedghi

EFFECT OF METAL IONS ON PHOTOCATALYTIC PERFORMANCE OF TiO2 FILM PREPARED BY MICRO-ARC OXIDATION pp. 1-7

Zhongcai Shao, Yonghui Cui, Xiaodan Li, Lina Yu and Xiaoyi Shen