Surface Review and Letters (SRL)

1994 - 2025

Current editor(s): S Y Tong

From World Scientific Publishing Co. Pte. Ltd.
Bibliographic data for series maintained by Tai Tone Lim ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 28, issue 12, 2021

EFFECT OF AMBIENT RELATIVE HUMIDITY AND SOAKING TIME ON THE FORMATION OF OCTADECYLTRICHLOROSILANE COATINGS ON BOROSILICATE GLASS SUBSTRATES FOR ALKALI-METAL VAPOR CELLS pp. 1-8

Haotian Chi, Junying Zhang, Heng Yuan, Zhongyu Cai, Sheng Zou and Wei Quan

SURFACE-ENHANCED RAMAN SCATTERING ACTIVITY OF PLASMONIC Ag–Ti NANOISLAND FILMS pp. 1-8

Wuttichai Phae-Ngam, Tanattha Rattana, Supphadate Sujinnapram, Chanunthorn Chananonnawathorn, Uraiwan Waiwijit, Wantanee Hincheeranun, Rattanachai Kowong, Mati Horprathum, Tossaporn Lertvanithphol, Watcharapon Vanidshow, Weeraya Yuwasonthi and Jaroenporn Chokboribal

MULTI-RESPONSE OPTIMIZATION ON ABRASIVE WATERJET MACHINING OF GLASS FIBER REINFORCED PLASTICS USING TAGUCHI METHOD COUPLED WITH TOPSIS pp. 1-11

A. Shanmugam, T. Mohanraj, K. Krishnamurthy and Ali Kaya Gur

EFFECT OF ABRASIVE TYPE ON THE SURFACE ROUGHNESS AND MRR IN MAF OF AISI 304 STEEL pp. 1-11

Mahmut Çelik, GÜRÜN Hakan and ULAŞ ÇAYDAŞ

ASSESSING THE TRIBOLOGICAL PROPERTIES OF VEGETABLE OIL EMULSIONS AND MACHINING PARAMETER OPTIMIZATION USING RESPONSE SURFACE METHODOLOGY pp. 1-15

D. K. Karupannasamy, M. Sambathkumar, R. Gukendran, K. S. K. Sasikumar, N. Baaskaran and S. Shankar

EFFECT OF HEAT INPUT AND POST WELD HEAT TREATMENT ON THE PHASE TRANSFORMATION TEMPERATURE OF TIG-WELDED NiTinol SHEETS pp. 1-9

Samson R Manoj and Kannan T Deepan Bharathi

DESIGN AND PRODUCTION OPTIMIZATION OF PP 20% TALC ADDITIVE FILTER WITH PLASTIC INJECTION MOLDING MACHINE pp. 1-13

Yusuf Ozbakis and Engin Nas

INVESTIGATION OF MICROSTRUCTURE PROPERTIES OF NbC–B COATED HARDOX 400 STEEL BY TRD METHOD AND EVALUATION OF WEAR BEHAVIOR BY TAGUCHI METHOD pp. 1-13

YAHYA HIÅžMAN Çelä°k, Mehmet Ertem, KAYA GÃœR Ali, BÃœLENT Kurt, UÄžUR Caligulu, Çetin Özay and TÃœLAY Yildiz

ELECTROLYTIC EFFECT ON GROWTH OF GRAPHENE QUANTUM DOTS VIA ELECTROCHEMICAL PROCESS pp. 1-13

Rangsan Panyathip, Thanakrit Sintiam, Sorawit Weerapong, Athipong Ngamjarurojana, Pisist Kumnorkaew, Supab Choopun and Sukrit Sucharitakul

AIR FLOW CONTROL VALVE DEVELOPMENT WITH REINFORCED OPERATING PARAMETERS pp. 1-14

Yusuf Ozbakis and Fehmi Erzincanli

A NEW APPROXIMATION: FROM BARRIER LOWERING TO INTERFACE STATE DENSITY pp. 1-14

Abdulkadir Korkut

RESEARCH STATUS OF SURFACE MODIFICATION OF TITANIUM-BASED ALLOYS BY PACK CEMENTATION pp. 1-21

Feng Han, Shuo Yuan, Naiming Lin, Qunfeng Zeng, Hongbing Jia, Maolin Li and Yucheng Wu

EVALUATION OF THE EFFECTS OF DRILLING PARAMETERS, TOOL GEOMETRY AND CORE MATERIAL THICKNESS ON THRUST FORCE AND DELAMINATION IN THE DRILLING OF SANDWICH COMPOSITES pp. 1-12

ERGÃœN Ekä°cä°, GÃœLTEKÄ°N Uzun and ALTAÅž Sedat

MORPHOLOGICAL AND PHYSICAL PROPERTIES OF ZnO NANOSTRUCTURES GROWN ON Sb-DOPED ZnO SEEDING FILMS ANNEALED UNDER DIFFERENT ATMOSPHERES pp. 1-7

Wuttichai Sinornate, Hidenori Mimura and Wisanu Pecharapa

SYNTHESIS AND CHARACTERIZATION OF NANOCRYSTALLINE Co-DOPED ZnO THIN FILMS PREPARED BY CHEMICAL SPRAY PYROLYSIS FOR OPTOELECTRONIC APPLICATIONS pp. 1-7

Faez M. Hassan and Aus A. Najim

Volume 28, issue 11, 2021

SYNTHESIS OF ZINC CARBOXYLATES METAL–ORGANIC FRAMEWORK FOR SENSING OF NITROAROMATIC COMPOUNDS pp. 1-6

Wei Wang, Cheng-Liang Han, Yun Wu, Shou-Yi Wei and Wei-Ping Sheng

EXPERIMENTAL INVESTIGATION OF MICRO-EDM OPERATION IN INCONEL 718 pp. 1-8

Mayank Choubey and K. P. Maity

BEHAVIOR OF APSED TBCS SUBJECTED TO COOLING MEDIA IN THERMAL CYCLE SYSTEMS pp. 1-10

Vijay Kumar Dwivedi and Dipak Kumar

ADSORPTION AND DECOMPOSITION OF NITROGEN OXIDES ON Al(111) SURFACE: A DENSITY FUNCTIONAL THEORY STUDY pp. 1-10

Chenhong Xu, Suqin Zhou, Li Yuanrui, Chi Zhang and Yunzhe Wei

SURFACE ROUGHNESS ANALYSIS OF CRYO-TREATED AND TEMPERED STEELS IN CYLINDRICAL GRINDING OPERATION pp. 1-10

Menderes Kam and KABASAKALOÄžLU Ufuk

INFLUENCE OF THE INLET PRESSURE ON IMPULSE CHARACTERISTICS OF ALUMINUM SAMPLES pp. 1-10

Zhongguo Yang, Shujuan Yi, Shengxue Zhao and Wang Shi

RECENT RESEARCH PROGRESS IN DEEP HOLE DRILLING PROCESS: A REVIEW pp. 1-21

J. Bharani Chandar, L. Nagarajan and M. Siva Kumar

EFFECT OF MIG WELDING PROCESS PARAMETERS ON EROSION AND CORROSION BEHAVIOR OF ASTM A106 GRADE-B PIPE WELDMENTS pp. 1-13

R. Sudhakar, J. Yoganandh and S. Omprakasam

PROPORTIONAL EFFECT IN SbSi/N-DOPED GRAPHENE NANOCOMPOSITE PREPARATION FOR HIGH-PERFORMANCE LITHIUM-ION BATTERIES pp. 1-13

Naruephon Mahamai, Thanaphat Autthawong, Aishui Yu and Thapanee Sarakonsri

INVESTIGATION ON DRY SLIDING WEAR BEHAVIOR OF TITANIUM DIOXIDE-REINFORCED MAGNESIUM MATRIX COMPOSITE pp. 1-13

P. C. Elumalai and R. Ganesh

ANTICORROSION AND REPAIR BEHAVIOR OF REC–SiO2 SILANE FILM ON CARBON STEEL pp. 1-9

Jiabin Tang, Yihe Yao, Manli Guo, Jibo Jiang, Haishan Cong, Yukai Chen, Yaoxin Sun, Yue Kong and Sheng Han

INVESTIGATION OF WIPER INSERTS EFFECTS IN TURNING AND MILLING PROCESSES pp. 1-9

Murat Kiyak

MECHANICAL AND BONDING PROPERTIES OF BI-METAL Al/Cu BULK COMPOSITES PRODUCED VIA APB TECHNIQUE pp. 1-7

M. Heydari Vini and S. Daneshmand

SLOT-DIE-COATED ZINC TIN OXIDE FILM FOR CARBON-BASED METHYLAMMONIUM-FREE PEROVSKITE SOLAR CELLS pp. 1-7

Nutcha Khambunkoed, Duangmanee Wongratanaphisan, Atcharawon Gardchareon, Narupon Chattrapiban, Saowalak Homnan, Prayoon Songsiriritthigul and Pipat Ruankham

EFFECT OF EMBEDDED TUNGSTEN PARTICLES ON IMPACT RESISTANCE OF DIAMOND COATING pp. 1-12

Naichao Chen, Dongmei Liu, Fan Zhou, Ping He and Musen Liu

Volume 28, issue 10, 2021

OAT EXTRACT AS A NATURAL CORROSION INHIBITOR FOR MILD STEEL IN 3% NaCl SOLUTION pp. 1-13

A. Zaabar, R. Aitout, D. Amoura, R. Maizia, D. Ait Abdesselam, L. Makhloufi and B. Saidani

FUNCTIONAL TESTING OF THIN AND STACK WELDED M400-50 A5 CRNGO ELECTRICAL STEEL pp. 1-20

Bhushan Y. Dharmik and Nitin Kumar Lautre

EFFECT OF CARBON CONTENT ON MICROSTRUCTURE EVOLUTION AND PROPERTIES OF HYPEREUTECTIC HIGH CHROMIUM CAST IRON pp. 1-16

Qiang Guo, Hanguang Fu, Xingye Guo, Zhenguo Xing and Jian Lin

EXPERIMENTAL ANALYSIS OF CUT QUALITY ON SS347 MATERIAL USING CO2 ASSISTED LASER BEAM CUTTING AND PARAMETRIC OPTIMIZATION USING GENETIC ALGORITHM pp. 1-12

H. Ramakrishnan, N. Ganesh, D. Jafrey Daniel James and B. Ashok

MEASUREMENT OF SURFACE QUALITY AND OPTIMIZATION OF CUTTING PARAMETERS IN SLOT MILLING OF GFRP COMPOSITE MATERIALS WITH DIFFERENT FIBER RATIOS PRODUCED BY PULTRUSION METHOD pp. 1-12

Harun Yaka

STRUCTURE, MORPHOLOGY AND MAGNETIC PROPERTIES OF ELECTRODEPOSITED NI FILMS pp. 1-7

T. Kacel, A. Guittoum, M. Hemmous, R. M. ÖKSÜZOGLU and A. Azizi

EXPERIMENTAL AND STATISTICAL INVESTIGATION OF SURFACE ROUGHNESS AND VIBRATION DURING FINISH TURNING OF AISI 4140 STEEL WORKPIECE UNDER COOLING METHOD pp. 1-11

Menderes Kam and ÅžEREMET Musa

MULTI-RESPONSE OPTIMIZATION OF END-MILLING PARAMETERS FOR INCONEL 625 USING TAGUCHI COUPLED WITH TOPSIS pp. 1-11

Mohanraj Thangamuthu, Jayanthi Yerchuru, Nithin Aravind Ramasamy Shanmugam, Yameni Ravi and Ali Kaya Gur

RESEARCH ON TRIBOLOGICAL BEHAVIOR OF Cr3C2-25NiCr-COATED BRAKE DISC pp. 1-11

Halä°l Kili㇠and Cenk Misirli

SELF-ASSEMBLY ON DUAL WETTABLE SURFACE pp. 1-10

Imtiaz Ahmad, Rahim Jan, Hidayat Ullah Khan, Akhlaq Hussain, Aqsa Tabassum, Aqsa Latif and Ambreen Ali

A COMPARISON OF THREE-WAY SYNTHESIS AND CHARACTERIZATION OF REDUCED GRAPHENE OXIDE–SULFUR COMPOSITE pp. 1-6

Inam Ul Haq, Abdul Waheed Anwar, Abdul Waheed, Zunair Arslan, Usman Ilyas and Akhtar Munir

EFFECT OF THE TOOL SURFACE AREA AND WORKPIECE VIBRATION ON THE μEDM PERFORMANCE pp. 1-9

Deepak Rajendra Unune

A COMBINATION OF POINT DEFECTS AND NANOSIZED GRAINS TO MINIMIZE LATTICE THERMAL CONDUCTIVITY OF Sn AND Se CO-DOPED CoSb3 VIA MIXED BALL MILLING AND SPARK PLASMA SINTERING pp. 1-9

Thammanoon Kapanya, Binbin Jiang, Jiaqing He, Yang Qiu, Chanchana Thanachayanont and Thapanee Sarakonsri

IMPROVEMENT IN STRUCTURAL, OPTICAL AND ELECTRICAL PROPERTIES OF ITO FILM THROUGH AlN AND HfO2 BUFFER LAYERS pp. 1-9

Naser M. Ahmed, Noor Humam Sulaiman, Mahir Faris Abdullah, Asmaa Soheil Najm, Naveed Afzal, Abeer S. Altowyan and Mohsin Rafique

EXPERIMENTAL AND STATISTICAL INVESTIGATION OF THE EFFECTS OF CUTTING PARAMETERS ON KERF QUALITY AND SURFACE ROUGHNESS IN LASER CUTTING OF Al 5083 ALLOY pp. 1-18

BARIŞ ÖZLÜ

Volume 28, issue 09, 2021

EFFECTS OF HYBRID FIBER-REINFORCED GEOPOLYMER CONCRETE STABILIZED WITH GYPSEOUS SOIL-EXPERIMENTAL AND SIMULATION APPROACH pp. 1-10

Seeta Kamalakar Rao and Sanjeet Kumar

ENHANCING ADHESION STRENGTH AND WEAR PERFORMANCE OF ALCRN COATING ON COOL-WORK TOOL STEEL THROUGH INTRODUCING CRNX ADHESION LAYER pp. 1-10

Hui Xiao, Xianna Meng, Bingyue Nie, Haiyan Kang, Cong Li and Yi Wang

TAGUCHI GREY RELATIONAL MULTI-RESPONSE EXPERIMENTAL OPTIMIZATION ON MODIFICATION OF Al-6061 SURFACE USING Si–Cu GREEN COMPACT TOOL IN EDM pp. 1-8

Rashed Mustafa Mazarbhuiya, Bhargab Madhab Barua and Maneswar Rahang

CORONENE ORGANIC FILMS: OPTICAL AND SPECTRAL CHARACTERISTICS UNDER ANNEALING TEMPERATURE INFLUENCES pp. 1-8

Erman Erdogan

SURFACE MODIFICATION OF COMMERCIALLY PURE TITANIUM BY GOLD-ION IRRADIATION FOR BIOMEDICAL APPLICATIONS pp. 1-11

Ameeq Farooq, Kashif Mairaj Deen, Muhammad Rizwan and Akhlaq Ahmad

EFFECT OF EXTERNAL MAGNETIC FIELD ON STRUCTURAL AND MAGNETIC PROPERTIES OF ELECTRODEPOSITED Co–Fe NANOWIRES pp. 1-6

S. Shamaila, M. Hassan, R. Sharif and A. Salman

PHOTOINDUCED CURRENT GENERATION AND PHOTOCATALYTIC ACTIVITY OF TiO2–Fe2O3 NANOPARTICLES COATED MWCNTS FILMS PREPARED BY SPARKING PROCESS pp. 1-6

W. Sroila, A. Panthawan, N. Jumrus, W. Thongpan, E. Kantarak, T. Kumpika, P. Singjai and W. Thongsuwan

INVESTIGATION OF THE EFFECTS OF DIFFERENT RETROGRESSION AND RE-AGING PARAMETERS APPLIED TO THE 7075 ALLOY ON THE MICRO-ARC OXIDATION PROCESS pp. 1-6

Mustafa Safa Yilmaz, Gökhan Özer, Orhan Şahin and Ahmet Karaaslan

RECENT AND FUTURE PROSPECTIVE OF VARIOUS PHOTO-CATALYSTS FOR ENVIRONMENTAL POLLUTION AND ENERGY PRODUCTION: A REVIEW pp. 1-29

Zarbad Shah, Tofail Arshad, Kausar Shaheen, Sher Bahadar Khan, Syed Muhammad Salman and Ala Uddin

FEM SIMULATION ASSESSMENT OF MACHINING TITANIUM GRADE 2 USING TEXTURED TOOL pp. 1-16

Rima Singha Roy and Kalipada Maity

A NEW CRITERION FOR DRILLING MACHINABILITY EVALUATION OF NANOCOMPOSITES MODIFIED BY GRAPHENE/CARBON FIBER EPOXY MATRIX AND OPTIMIZATION USING COMBINED COMPROMISE SOLUTION pp. 1-19

Jogendra Kumar and Rajesh Kumar Verma

MULTIPLE OPTIMIZATION ANALYSIS OF MRR, SURFACE ROUGHNESS, SOUND İNTENSITY, ENERGY CONSUMPTION, AND VIBRATION VALUES IN MACHINABILITY OF TC4 TITANIUM ALLOY pp. 1-12

Harun Akkuş

A NOVEL pH SENSITIVITY OF SnO2 THIN FILM BASED EGFET PREPARED USING CHEMICAL BATH METHOD pp. 1-7

Imad H. Kadhim and N. M. Abd-Alghafour

COMPREHENSIVE UTILIZATION OF PHOSPHOGYPSUM: ADSORPTION OF METHYLENE BLUE AND ITS APPLICATION IN BRICKS pp. 1-7

Ya Gao, Di Sun, Chengliang Han and Junjun Huang

PHOTOELECTRON SPECTROSCOPY STUDIES ON Al2O3 FILMS ON p-GaN(0001) pp. 1-7

R. Lewandków, M. Grodzicki and P. Mazur

Volume 28, issue 08, 2021

ON-SURFACE MOLECULAR REACTIONS pp. 1-21

Liangliang Cai and Wei Xu

SCREENING EFFECTS AT ORGANIC–2D MATERIAL HETEROINTERFACES pp. 1-20

Yu Jie Zheng and Arramel

CHARACTERIZATION OF ELECTRONIC STRUCTURES AT ORGANIC–2D MATERIALS INTERFACES WITH ADVANCED SYNCHROTRON-BASED SOFT X-RAY SPECTROSCOPY pp. 1-20

Liang Cao and Dong-Chen Qi

MOLECULAR FUNCTIONALIZATION OF 2D MATERIALS pp. 1-23

Miriam C. Rodríguez González, Rahul Sasikumar and Steven de Feyter

TECHNOLOGY AND APPLICATIONS OF GRAPHENE OXIDE MEMBRANES pp. 1-24

Xuanye Leng, Siyu Chen, Kou Yang, Musen Chen, Majid Shaker, Evgenii E. Vdovin, Qi Ge, Kostya S. Novoselov and Daria V. Andreeva

HOLOGRAPHIC CONVERGENT ELECTRON BEAM DIFFRACTION (CBED) IMAGING OF TWO-DIMENSIONAL CRYSTALS pp. 1-15

T. Latychevskaia, S. J. Haigh and K. S. Novoselov

FORWARD: MOLECULAR INTERACTIONS ON TWO-DIMENSIONAL MATERIALS pp. 1-1

Andrew Wee, Kostya S. Novoselov and Arramel

ENHANCEMENT OF REDUCED GRAPHENE OXIDE BOLOMETRIC PHOTORESPONSE VIA ADDITION OF GRAPHENE QUANTUM DOTS pp. 1-7

S. Lai, M. Chen, Yu. N. Khanin, K. S. Novoselov and D. V. Andreeva

ELECTRONIC AND OPTICAL MODIFICATION OF ORGANIC-HYBRID PEROVSKITES pp. 1-26

Silmi Kaffah, Lina Jaya Diguna, Suriani Abu Bakar, Muhammad Danang Birowosuto and Arramel

INTRODUCTION TO TWO-DIMENSIONAL MATERIALS pp. 1-22

Xuanye Leng, Siyu Chen, Kou Yang, Musen Chen, Majid Shaker, Evgenii E. Vdovin, Qi Ge, Kostya S. Novoselov and Daria V. Andreeva

THE ELECTRONIC STRUCTURE AT ORGANIC–2D MATERIAL HETEROINTERFACES pp. 1-16

Yu Li Huang and Andrew Thye Shen Wee

RECENT ADVANCES IN BOND-RESOLVED SCANNING TUNNELING MICROSCOPY pp. 1-16

Shaotang Song, Jie Su, Xinnan Peng, Xinbang Wu and Mykola Telychko

Volume 28, issue 07, 2021

MULTI-OBJECTIVE OPTIMIZATION OF EDM PROCESS PARAMETERS USING RSM-BASED GRA AND TOPSIS METHOD FOR GRADE 6 TITANIUM ALLOY pp. 1-14

Munmun Bhaumik, Kalipada Maity and Kasinath Das Mohapatra

INVESTIGATION USING FINITE ELEMENT ANALYSIS OF EFFECT ON CRATER GEOMETRY OF DIFFERENT ABRASIVE TYPES IN ABRASIVE WATER JET MACHINING pp. 1-6

Kadir Gok

COMPARISON OF THE INFLUENCE OF PHYTIC ACID AND SILANE ADDITIVES ON CORROSION RESISTANCE OF CERAMIC COATINGS ON Mg ALLOY BY PEO METHOD pp. 1-10

Sung-Nam Pak, Kyong-Sik Ju, Kwang-Won Nam and Chol-Ho Pang

SYNTHESIS AND CHARACTERIZATION OF (ZNO)–(CO3O4) NANOCOMPOSITE VIA SPRAY PYROLYSIS PROCESS: THE USE OF THE BRUGGEMAN MODEL ON OPTICAL PROPERTIES PREVISION pp. 1-10

K. M. E. Boureguig, H. Tabet-Derraz, T. Seddik and M. A. Benali

SLIDING WEAR BEHAVIOR OF ZrO2-CONTAINING PEO COATINGS FORMED ON ZL101A ALUMINUM ALLOY pp. 1-10

Yuanji Shi, Xunzhong Guo, Haiming Yu and Junwan Li

STUDY OF HARDNESS AND CORROSION RATE OF COPPER IONS IRRADIATED Mg–Al–Zn ALLOY IN RINGER LACTATE SOLUTION pp. 1-8

Muhammad Hamza Akhtar, Naveed Afzal, Mohsin Rafique, Ameeq Farooq, Ali Awais, Muhammad Adeel Aleem and Kaab Bin Tayyab

THE EFFECTS OF NOZZLE NUMBER AND OUTLET GEOMETRY ON GRINDING PROCESS WITH MINIMUM QUANTITY COOLING (MQC) BY NANOFLUID pp. 1-8

Hooman Abiyari and Mohammad Mahdi Abootorabi

CORROSION STUDY OF ZINC-RICH EPOXY ESTER PAINTS FOR COLD GALVANIZING OF MILD STEEL pp. 1-11

Muhammad Faheem Maqsood, Mohsin Ali Raza, Zaeem Ur Rehman, Muhammad Abid, Aqil Inam and Shahid Iqbal

IN VITRO STUDY, CORROSION, AND THERMAL OXIDATION BEHAVIOR OF WIRE-SHAPED NITISN SHAPE MEMORY ALLOY pp. 1-11

Ibrahim Nazem Qader, Mediha Kok, Zehra Deniz Cirak, Mustafa Ersin Pekdemir, Sinan Saydam and Yildirim Aydogdu

PROCESSING AND CHARACTERIZATION OF ECO-FRIENDLY CUTTING FLUID WITH NANO ADDITIVES FOR TURNING OPERATION pp. 1-12

M. K. Marichelvam, S. Senthil Murugan, K. Maheswaran and D. Shyamprasad Varma

INVESTIGATION OF DRY SLIDING WEAR BEHAVIOR OF AL 7075–(SiC/TiC) HYBRID METAL MATRIX COMPOSITES pp. 1-12

R. Gukendran, M. Sambathkumar, K. S. K. Sasikumar, K. Ponappa and S. Gopal

APPLICATION POTENTIAL OF RESPONSE SURFACE METHOD ON ELECTRO DISCHARGE MACHINING OF AA6061–CENOSPHERE AMCs PREPARED BY COMPOCASTING METHOD pp. 1-18

Abhijit Dey, Krishna Murari Pandey, Ram Naresh Rai, Akhtar Khan and Anshuman Das

REFLECTANT PHOTONIC CRYSTALS PRODUCED VIA POROUS-ALUMINA-ASSISTED-ANODIZING OF Al/Nb AND Al/Ta SYSTEMS pp. 1-7

Andrei Pligovka

A DFT-BASED ANALYSIS OF ADSORPTION PERFORMANCE OF CU2+ AND ZN2+ ON DEFECTIVE GRAPHENE FOR THE APPLICATION OF POLLUTING METAL IONS TREATMENT pp. 1-7

Tao Chen, Libao An, Yan Zhang and Xiaotong Jia

MODELING AND OPTIMIZATION OF HOLE ACCURACY AND DRILLING TIME IN MAGNESIUM AZ31 PLATE pp. 1-19

M. Varatharajulu, Muthukannan Duraiselvam, G. Jayaprakash, N. Baskar, P. Karthick and R. Anbarasu

Volume 28, issue 06, 2021

TUNING OF CRYSTALLITE SIZE, ENERGY GAP, AND MAGNETIC PROPERTY OF Mn-DOPED CoFe2O4 NANOPARTICLES pp. 1-21

P. Priyadharshini and K. Pushpanathan

EXPERIMENTAL ANALYSIS OF THE EFFECT OF MECHANICAL PROPERTIES AND MICROSTRUCTURE ON TOOL VIBRATION AND SURFACE QUALITY IN DRY TURNING OF HARDENED AISI 4340 STEELS pp. 1-13

Menderes Kam and Mustafa Demi̇rtaş

INFLUENCE OF MOLECULE MODIFICATION AND LINKING GROUP ON ELECTRONIC TRANSPORT IN MOLECULAR DEVICES pp. 1-9

Yamin Wu, Baoan Bian, Bin Liao and Guoliang Wang

IMPROVEMENT OF SURFACE POTENTIAL ENERGY OF INDIUM TIN OXIDE THIN FILM MODIFIED WITH ORGANIC SEMICONDUCTOR MATERIAL BASED ON PHENYL GROUP pp. 1-9

Ali Kemal Havare

PHOTOCATALYTIC TiO2 FILMS SYNTHESIZED BY REACTIVE CHEMICAL SPRAYING pp. 1-9

Nesrine Barbana and Adel Ben Youssef

A NOVEL 3D MICROMIXER WITH QUARTIC KOCH CURVE FRACTAL pp. 1-9

Siyue Xiong and Xueye Chen

A COMPARATIVE INVESTIGATION ON CAST AND AGING (T6) RESPONSE ON MECHANICAL AND DRY SLIDING WEAR BEHAVIOR OF Al7075/SiCP METAL MATRIX COMPOSITE pp. 1-20

R. Ashok Kumar and A. Devaraju

THE FIRST PRINCIPLE STUDY OF COMPARISON OF DIVALENT AND TRIVALENT IMPURITY IN RRAM DEVICES USING GGA+U pp. 1-6

Ejaz Ahmad Khera, Hafeez Ullah, Muhammad Imran, Hassan Algadi, Fayyaz Hussain and Rana Muhammad Arif Khalil

GROWTH AND MAGNETIC PROPERTIES OF DC MAGNETRON SPUTTERED Co0.2Fe0.8 THIN FILM pp. 1-6

Maheswari Mohanta, S. K. Parida, Ananya Sahoo and V. R. R. Medicherla

MODELING AND MULTI-OBJECTIVE OPTIMIZATION FOR APSed THERMAL BARRIER COATINGS ON IN718 pp. 1-10

Vijay Kumar Dwivedi, Priyanka Sharma and Dipak Kumar

CONSTRUCTION OF A HYDROPHOBIC COMPOSITE COATING WITH WATERBORNE ACRYLIC RESIN AND FLOWER-SHAPED ZnO pp. 1-10

Caixia Sun, Jingjie Dai, Hongxia Zhang, Shouying Li and Ruisong Hu

EFFECT OF ANISOTROPIC SURFACE TENSION ON THE GROWTH OF COLUMNAR CRYSTALS IN TERNARY UNDERCOOLED MELTS pp. 1-10

Hailong Fan, Yanyan Shan and Mingwen Chen

STUDY ON CORROSION OF TI-6AL-4V ALLOY IN 3.5% NACL SOLUTION BY WIRE BEAM ELECTRODE pp. 1-10

Cheng-Qun Pan, Qing-Dong Zhong, Jian Yang and Yu-Lin Li

SYNTHESIS, CHARACTERIZATION AND ORR ACTIVITY OF METAL-N4-NANOCOMPOSITES pp. 1-8

Vivek Sharma and Anuj Kumar

STUDY ON A RAPID MANUFACTURING OF DIAMOND MICROMIXER BY CO2 LASER pp. 1-7

Yue Tian and Xueye Chen

Volume 28, issue 05, 2021

FABRICATION OF PROTECTIVE SiC/TiO2/SiO2 COATING FOR GRAPHITE ELECTRODES pp. 1-6

Hossein Alian Moghadam, Majid Jabbari, Saeed Daneshmand, Saeid Rasouli Jazi and Arezoo Khosravi

EFFECTS OF PARTICLE SIZE AND SINTERING TEMPERATURE ON SUPERELASTICITY BEHAVIOR OF NiTi SHAPE MEMORY ALLOY USING NANOINDENTATION pp. 1-11

C. Velmurugan and V. Senthilkumar

INVESTIGATION OF RESIDUAL STRESS FIELD IN THE CURVED SURFACE OF ROUND ROD SUBJECTED TO MULTIPLE LASER SHOCK PEENING pp. 1-11

Xingquan Zhang, Wenwu Niu, Yuande Yin, Jinxiu Fang, Syed Sohail Ahmad Shah and Yuanchao Yu

EFFECTS OF PULSE WIDTH ON CORROSION BEHAVIOR OF DIAMOND-LIKE CARBON COATINGS PREPARED ON THE SURFACE OF HIGH NITROGEN NICKEL-FREE STAINLESS STEEL pp. 1-11

Jilong Qi, Dongxu Chen, Yanan Wang, Yanwen Zhou and Peng Gao

EXAMINATION OF B4C–FeCrC COMPOSITE LAYER DURING DRY SLIDING USING STATISTICAL METHOD pp. 1-11

Ali Kaya Gur, Busra Icen, Subramaniam Shankar and Thangamuthu Mohanraj

A SUPERHYDROPHOBIC COATING ON TITANIUM ALLOYS BY SIMPLE CHEMICAL ETCHING pp. 1-10

Yufeng Zhang, Guoliang Chen, Yaming Wang and Yongchun Zou

MULTIMODE WRINKLING PATTERNS OF IRON FILMS SPUTTER DEPOSITED ON FLEXIBLE SUBSTRATES WITH GRADIENT MODULUS pp. 1-10

Yongju Zhang, Pinggen Cai, Li Zhang and Senjiang Yu

DETERMINATION OF MAIN ELECTRICAL PARAMETERS OF Au–4H-n-SiC (MS) AND Au–Al2O3–4H-n-SiC (MIS) DEVICES pp. 1-10

Gülçi̇n Ersöz Demi̇r and İbrahi̇m Yücedağ

NUMERICAL SIMULATION OF THREE-DIMENSIONAL PASSIVE MICROMIXER WITH VARIABLE-ANGLE GROOVES AND BAFFLES pp. 1-8

Siyue Xiong and Xueye Chen

ENERGETICALLY AND STERICALLY FAVORABLE ASSEMBLY OF IDENTICAL GOLD NANORODS WITH VARYING CONCENTRATIONS OF NANOSPHERES pp. 1-13

Imtiaz Ahmad, Akhlaq Hussain, Ambreen Ali and Rahim Jan

SYNTHESIS OF ORGANIC–INORGANIC HYBRID COATINGS FOR THE PROTECTION OF ALUMINUM SUBSTRATES pp. 1-5

Bing Lei, Guozhe Meng and Wei Liu

SURFACE PHASE DIAGRAMS OF SEMI-INFINITE FERRIMAGNETIC SYSTEM pp. 1-18

Saida Zouhair, Mohamed Monkade, Abdelmoumen El Antari, Mohammed El Bouziani, Nabil Hachem and Mohamed Madani

ADSORPTION AND PHOTODEGRADATION PROPERTIES OF TiO2-DOPED METHYLENE BLUE MOLECULAR IMPRINTED POLYMERS pp. 1-12

Hongfu Meng, Tiaobin Zhao and Nong Wang

NANOWIRE OXIDE FILM FOR LOW-TEMPERATURE ALUMINIZED 20 STEEL BY THERMAL OXIDATION pp. 1-7

Min Huang, Yong-Chuan Duan, Yu Wang, Yi-Chen Cai and Liu-Yi Hu

COMPUTATIONAL FLUID DYNAMICS SIMULATION OF EROSION-CORROSION IN ABRASIVE WATER JET MACHINING pp. 1-7

H. Deni̇z Ada, Mehmet Erdem and Kadi̇r Gok

Volume 28, issue 04, 2021

ARGON-ARC CLADDING OF Q235 LOW-CARBON STEEL BY CO BASE ALLOY DEPOSITION pp. 1-5

Zhiyun Ye, Zhiyuan Liu, Jianing Li, Qian Su, Bo Zhao, Shengzu Zhang, Dongwei Guan, Huabin Li, Hang Li and Zhanfeng Zhang

EXPERIMENTAL INVESTIGATION OF WEAR BEHAVIOR OF BORAX-ADDED MINERAL OIL AT VARIOUS TEMPERATURES pp. 1-12

Harun Akkuş, Hayrettin Duzcukoglu and Firat Seri̇n

ESTIMATION OF SURFACE ROUGHNESS AND FLANK WEAR IN MILLING OF INCONEL 625 SUPERALLOY pp. 1-12

Mahir Akgün and Halil Demir

A STUDY OF FEMTOSECOND LASER POLISHING OF CVD NANOPOLYCRYSTALLINE DIAMOND FILMS pp. 1-7

Yu-Xiao Cui, Ping Guo, Xueming Zhu, Yan-Ling Tian, Da-Wei Zhang and Hou-Jun Qi

GREEN SYNTHESIS OF Cu, Ni AND CuNi ALLOY NANOPARTICLES USING ROSMARINUS OFFICINALIS PLANT EXTRACT: EVALUATION OF ELECTROCATALYTIC ACTIVITY OF CORRESPONDING METALLIC OXIDES pp. 1-18

Dyhia Ait Abdesselam, Razika Aitout, Aida Zaabar, Dehbia Oukil and Laid Makhloufi

ADSORPTION-INDUCED INCREASING SPECULARITY OF CONDUCTION ELECTRONS’ SURFACE SCATTERING pp. 1-11

Sergii Sologub, Ivan Bordeniuk, Roman Amirov, Nataliia Petrova and Ivan Yakovkin

EFFECT OF MACHINING PARAMETERS ON SURFACE ROUGHNESS FOR ALUMINIUM MATRIX COMPOSITE BY USING TAGUCHI METHOD WITH DECISION TREE ALGORITHM pp. 1-11

P. Raveendran, S. V. Alagarsamy, M. Ravichandran and M. Meignanamoorthy

MODIFIED AMORPHOUS SiO2 FROM Zr-CONTAINING SILICA RESIDUE: A PROMISING WAY OF RECYCLING USEFUL MATERIALS AS WELL AS REMOVING Cr(VI) FROM WATER pp. 1-11

Yu Liang, Wanting Chen, Han Zhang, Jimo Wang, Hao Ding and Xipeng Yu

EFFECT AND MECHANISM OF CeO2 ON THE MICROSTRUCTURE AND PROPERTIES OF Ni60A–Cr3C2 LASER CLADDING LAYER pp. 1-10

Dongni Zhang, Hanguang Fu, Zhenguo Xing, Xuelong Ping and Jian Lin

IRON-DOPED Bi2Sr2Ca2(Cu0.91Fe0.09)3O10+δ SUPERCONDUCTOR WITH NANOGROWTH pp. 1-10

Rohitash Kumar

A NEW APPROACH TO PREPARE POLYCRYSTALLINE PbTe–TeO THIN FILM, AND ITS OPTICAL, STRUCTURAL, SURFACE AND ELECTRICAL CHARACTERIZATION pp. 1-8

Fatma Meydaneri Tezel and İ. Afşin Kariper

MECHANICAL PROPERTIES ESTIMATION FROM TENSILE TESTING OF AA6063-AISI304L BIMETAL JOINTS FRICTION WELDED WITH DIFFERENT JOINING METHODS pp. 1-15

S. Senthil Murugan, P. Sathiya and A. Noorul Haq

EFFECTS OF TEMPERATURE ON MILD STEEL GRADIENT-DISTRIBUTED WBE IMMERSED IN 3.5 wt.% NaCl SOLUTION pp. 1-14

Qingdong Zhong

SODIUM GLUCONATE INTERCALATED Mg-Al LDH COATING TO IMPROVE THE CORROSION RESISTANCE OF AZ31 pp. 1-9

Hamid Ali, Aneela Wakeel, Muhammad Junaid Anjum, Waheed Qamar Khan, Faizan Ali Ghauri, Muhammad Raza and Ghulam Yasin

INHIBITION EFFECT OF ADMIXED CITRUS PARADISE AND CYMBOPOGON OIL DISTILLATES ON THE CORROSION RESISTANCE MILD STEEL IN DILUTE ACID ELECTROLYTES pp. 1-9

Roland Tolulope Loto, Okpaleke Precious Chukwuebuka and Udoh Ufansi

Volume 28, issue 03, 2021

MECHANICAL SIMULATION AND ELECTROCHEMICAL CORROSION IN A BURIED PIPELINE WITH CORROSION DEFECTS SITUATED IN PERMAFROST REGIONS pp. 1-12

Xiaoli Li, Li Chen, Xiaoyan Liu, Yu Zhang and Lifu Cui

THE EFFECT OF IRON ON THE SURFACE GRAPHITIZATION OF SILICON CARBIDE pp. 1-5

Elif Mercan and Goknur Cambaz Buke

SURFACE STRENGTHENING TECHNOLOGY FOR MECHANICAL PARTS pp. 1-16

Wenbo Liu, Xuefeng Yang, Zhuang Wan, Guofeng Xia, Dan Li and Shouren Wang

OPTIMIZATION OF DRILLING PROCESS ON CARBON-FIBER REINFORCED PLASTICS USING GENETIC ALGORITHM pp. 1-13

D. Raj Kumar, N. Jeyaprakash, Che-Hua Yang and S. Sivasankaran

CHARACTERIZATION OF ELECTRODEPOSITED ZIRCONIA MODIFIED NiCoCrAlY COMPOSITE COATINGS ISOTHERMALLY OXIDIZED AT 1000∘C pp. 1-14

Meenu Srivastava, Atanu Chaudhuri, Parthasarathi Bera, B. Ravisankar and J. N. Balaraju

MASS PRODUCTION OF HFCVD DIAMOND-COATED WIRE-DRAWING DIES WITHOUT FILAMENT THROUGH THE HOLE pp. 1-14

Xin Song, Cheng-Chuan Wang, Xin-Chang Wang and Fang-Hong Sun

WEAR ANALYSIS OF ALUMINUM–NICKEL INTERMETALLIC SURFACE COMPOSITE FABRICATED BY FRICTION STIR PROCESSING pp. 1-8

Morteza Shamanian, Mohammad Reza Nasresfahani, Ebrahim Bahrami and Hossein Edris

ANTI-CORROSION PERFORMANCE OF 2-ISONICOTINOYL-N-PHENYLHYDRAZINECARBOTHIOAMIDE FOR MILD STEEL HYDROCHLORIC ACID SOLUTION: INSIGHTS FROM EXPERIMENTAL MEASUREMENTS AND QUANTUM CHEMICAL CALCULATIONS pp. 1-8

Ahmed A. Al-Amiery

ANALYSIS AND MICROHARDNESS PROFILE OF HOT DIPPING COATING ON LOW-ALLOY STEEL pp. 1-8

Abeer Shehab, Athil Al-Ezzi and Ali Al Katawy

Cs ADSORPTION ON GaAS(001) As-RICH β2 (2×4) AND Ga-RICH (4×2) RECONSTRUCTION PHASES: A FIRST-PRINCIPLES RESEARCH pp. 1-8

Xiaohua Yu, Huixia Sun and Guirong Shao

DYEING AND COLORFASTNESS PROPERTIES OF TENCEL FABRIC TREATED WITH NATURAL DYE EXTRACTED FROM ORANGE PEEL pp. 1-10

Tayyab Naveed, Aijaz Ahmed Babar, Sayed Yaseen Rashdi, Faisal Rehman, Muhammad Awais Naeem, Wei Wang, Mudassar Abbas and Muhammad Babar Ramzan

AN APPROXIMATION TO DETERMINE CORROSION AND MECHANICAL BEHAVIOR OF TI-BASED ALLOYS pp. 1-10

Yesim Yilmaz and Hulya Demiroren

PARAMETER OPTIMIZATION OF EDM FOR Mg/SiCp COMPOSITE USING RESPONSE SURFACE METHODOLOGY pp. 1-10

V. Ramasamy, M. Rajkumar and K. A. Sundararaman

EXPERIMENTAL INVESTIGATION OF COCONUT OIL WITH NANOBORIC ACID DURING MILLING OF INCONEL 625 USING TAGUCHI-GREY RELATIONAL ANALYSIS pp. 1-11

T. Mohanraj, P. Ragav, E. S. Gokul, P. Senthil and K. S. Raghul Anandh

COVERED FOUR-PORT REFLECTIVE SPLITTER WITH ZEROTH ORDER CANCELLED pp. 1-6

Chen Fu, Bo Wang and Jimin Fang

Volume 28, issue 02, 2021

SOLID PARTICLE EROSIVE WEAR BEHAVIOR OF Sol–Gel-DERIVED AA2024 THERMAL BARRIER COATINGS pp. 1-14

Dipak Kumar and K. N. Pandey

MACHINING OF HARDSTONE QUARTZ WITH MODIFIED AJM PROCESS USING HOT SiC ABRASIVES: ANALYSIS, MODELING, OPTIMIZATION, AND COST ANALYSIS pp. 1-21

Subhadip Pradhan, Sudhansu Ranjan Das, Basanta Kumar Nanda, Pankaj Charan Jena and Debabrata Dhupal

MICROSTRUCTURE OF NiCrBSi/WC COMPOSITE COATING DEPOSITED ON AISI316 STAINLESS STEEL BY TIG COATING PROCESS pp. 1-15

S. Buytoz, M. Kok, I. N. Qader, E. Balci and F. Dagdelen

CHARACTERIZATION OF TALC/TiO2 COMPOSITE PARTICLE MATERIAL PREPARED BY MECHANO-CHEMICAL METHOD pp. 1-6

Yu Liang, Weihua Ao, Hao Ding and Kai Shen

POLYMER BRUSH-INDUCED ELECTROLESS COPPER PLATING TO FABRICATE Cu/CaCO3 COMPOSITE POWDER pp. 1-6

Qihong Li, Guangchao Qin, Junjun Huang, Chengmei Gui, Jinguo Bei, Huabin Huang, Peng Li, Qiang Dong and Zhenming Chen

MICROSTRUCTURE AND WEAR RESISTANCE OF IN-SITU SYNTHESIZED TiB2–TiC/Fe COMPOSITE COATING BY LASER CLADDING pp. 1-11

Tianwei Yang, Zhaohui Wang, Shihai Tan and Fu Guo

OPTIMIZATION OF PROCESS PARAMETERS IN LASER WELDING OF HASTELLOY C-276 USING ARTIFICIAL NEURAL NETWORK AND GENETIC ALGORITHM pp. 1-10

K. R. Sampreet, Vasareddy Mahidhar, R. Karthic Narayanan and T. Deepan Bharathi Kannan

PARTICLE SHAPE-INDUCED CORRELATION EFFECT IN RANDOM DEPOSITION IN 1+1 DIMENSION AND RELATED EFFECT IN BALLISTIC DEPOSITION pp. 1-10

S. K. Das, D. Banerjee and J. N. Roy

EFFECTS OF ELECTRODE DISTANCE ON MECHANICAL AND TRIBOLOGICAL PROPERTIES OF HYDROGENATED DLC FILMS DEPOSITED BY DC-PULSE PECVD pp. 1-10

Kun-Yao Wu, Geng-Rui Zhao, Zhao Li and Zhen-Bin Gong

AN APPLICATION OF R-HiPIMS METHOD FOR TiO2- AND TiO2:Cu-BASED MEMRISTORS: CONTROLLING Cu DOPING USING DC PULSE METHOD pp. 1-8

Banafsheh Alizadeh Arashloo and Hasan Efeoglu

SUPERWETTABILITY-BASED CHEMICAL PROCESSES pp. 1-12

Sha-Sha Wang, Ling-Zhi Jin, Xiang Yu and Zhou-Hao Xing

INFLUENCE OF CARBON NANOTUBES REINFORCEMENT ON CHARACTERISTICS OF THERMALLY SPRAYED CERAMIC COATINGS pp. 1-12

G Mohammed Thalib Basha and B. Venkateshwarlu

INFLUENCE OF THE SUBSTRATE TEMPERATURE ON TiO2 THIN LAYERS DEPOSITED BY THE DIRECT CURRENT MAGNETRON SPUTTERING TECHNOLOGY pp. 1-12

Radouane Graine, Khouloud Bedoud, Nadjette Sehab and Djamel Zelmati

SPECTROSCOPIC ELLIPSOMETRY INVESTIGATION ON OPTICAL PROPERTIES OF Fe:SNO2 THIN FILMS: EFFECTS OF IRON CONCENTRATION pp. 1-7

Sahar Moradi and Hassan Sedghi

XPS, AES AND UPS INVESTIGATION OF SnO2/Si AND DFT-BASED THEORETICAL STUDY WITHIN THE mBJ-GGA SCHEME pp. 1-7

A. Mokadem, M. Bouslama, B. Kharoubi, A. Ouerdane, R. Khenata, M. Guezzoul, A. Baizid, M. Abdelkrim, K. B. Bensassi, S. H. Naqib and Xiaotian Wang

Volume 28, issue 01, 2021

INVESTIGATION OF NOISE CHARACTERIZATION OF COATED ROTORS pp. 1-15

Ali̇ Öz and Abdullah Demi̇r

THE INHIBITION EFFECT OF ZINC AND SILICATE IONS ON PITTING CORROSION INDUCED BY CERIUM(III) IONS OF CARBON STEEL IN SODIUM CHLORIDE SOLUTION pp. 1-15

Qiongwei Li

HIGH TEMPERATURE STEAM CORROSION OF MICROARC OXIDATION COATINGS ON 6061 ALUMINUM ALLOY AT 300∘C/3 MPa STEAM pp. 1-11

Yao Qu, Chaolin Yang, Xiaoyue Jin, Jiancheng Du and Wenbin Xue

CHEMICAL MECHANICAL POLISHING AND ITS MECHANISM ON YTTERBIUM-DOPED MIXED SESQUIOXIDES (Yb:LuScO3) pp. 1-11

Yuanyuan Fang, Hongbo He, Lunzhe Wu, Zhe Wang, Aihuan Dun and Long Zhang

MAGNETIC PROPERTIES AND MICROSTRUCTURE OF Co–Ni–Fe–Gd–Mn ELECTRODEPOSITED THIN FILM pp. 1-8

R. Suresh, P. Sathishkumar, S. Kumaravelan and S. Seshadri

MEASUREMENT OF MICROCHANNELS PRODUCED IN AA6351/RUTILE COMPOSITE BY WIRE-EDM pp. 1-14

P. Sreeraj, S. Thirumalai Kumaran, S. Suresh Kumar, M. Uthayakumar and M. Pethuraj

A NOVEL FABRICATION METHOD OF TWO-DIMENSIONAL NANO-MOLD BY COMBINING ULTRAVIOLET LITHOGRAPHY WITH WET ETCHING TECHNOLOGY pp. 1-9

E Cheng, Suzhou Tang, Lingpeng Liu, Helin Zou and Zhengyan Zhang

WEAR STUDY OF JUTE FIBER POLYMER COMPOSITE — INFLUENCE OF MONTMORILLONITE NANOPARTICLES pp. 1-9

S. Arulmurugan and N. Venkateshwaran

SURFACE MODIFICATION BY ELECTRO-DISCHARGE MACHINING USING POWDER METALLURGY ELECTRODE: A REVIEW pp. 1-16

S. V. V. N. Siva Rao, Tharra Bhavani, Rahul Kanti Nath, Pabitra Maji, Subrata Kumar Ghosh and John Deb Barma

INFLUENCE OF NICKEL DOPING CONCENTRATION ON THE CHARACTERISTICS OF NANOSTRUCTURE CuS PREPARED BY HYDROTHERMAL METHOD FOR ANTIBACTERIAL ACTIVITY pp. 1-16

Selma M. H. Al-Jawad, Ali A. Taha, Abdulah Mohammed Redha and Natheer Jamal Imran

DYNAMIC BEHAVIOR OF METHYLENE BLUE ON E. coli K30 CAPSULAR POLYSACCHARIDE USING LAYER BY LAYER SELF-ASSEMBLY TECHNIQUE pp. 1-12

Bandana Das, Alpana Baidya, Santanu Majumder and Ranendu Kumar Nath

TEMPERATURE DEPENDENCE OF HOMOGENEOUS ANATASE-PHASED TiO2 FILMS CHARACTERIZATION AND GAS-SENSING BEHAVIORS pp. 1-12

V. Gopala Krishnan and P. Elango

EFFECT OF FRICTION STIR PROCESSING (FSP) ON THE WEAR BEHAVIOR OF CAST AS21A MAGNESIUM ALLOY pp. 1-12

Sumit Joshi, Ramesh Chandra Singh and Rajiv Chaudhary

EXCELLENT ELECTROCATALYSIS OF OXYGEN EVOLUTION USING Co(OH)x(WO4)y/MESOPOROUS CARBON NANOCOMPOSITES pp. 1-7

Penghui Cao, Yuhua Yan, Xinli Tian, Ruizhuo Ouyang and Yuqing Miao

LASER SURFACE ALLOYING OF 304 STAINLESS STEEL WITH TUNGSTEN POWDER pp. 1-7

Baoshuai Du, Zhongwen Zhang, Shuai Suo, Xinmei Li and Hualing Deng