Surface Review and Letters (SRL)

1994 - 2025

Current editor(s): S Y Tong

From World Scientific Publishing Co. Pte. Ltd.
Bibliographic data for series maintained by Tai Tone Lim ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 29, issue 12, 2022

A NUMERICAL AND STATISTICAL APPROACH OF DRILLING PERFORMANCE ON MACHINING OF Ti–6Al–4V ALLOY pp. 1-11

UÄžUR Levent

EFFECT OF USSP DURATION ON CORROSION BEHAVIOR OF 5Cr–0.5Mo STEEL IN H2S MEDIUM pp. 1-8

Wenbin Xu, Minggang Liao and Yan Li

EXPLORE THE MECHANISM OF QUANTUM DOTS AS FLUORESCENT SENSOR TO DETECT HEAVY METAL IONS USING A SYNCHRONOUS FLUORESCENCE POLARIZATION TECHNIQUE pp. 1-8

Xiang Long and Shaogui Wu

FABRICATION OF HYDROPHOBIC COATINGS ON BETULA ALNOIDES WOOD WITH DIFFERENT ALKYLTRICHLOROSILANES pp. 1-8

Yulan Jian, Hui Wan, Kaimeng Xu, Yaru Zhang and Linkun Xie

EXPERIMENTAL INVESTIGATION ON ENERGY CONSUMPTION AND SURFACE FINISH IN TURNING OF Al-4032/6% SiC COMPOSITE FABRICATED THROUGH STIR CASTING pp. 1-17

Pardeep Saini and Pradeep K. Singh

MICROSTRUCTURE, MECHANICAL PROPERTIES AND WEAR BEHAVIOR OF NI-COATED CONTINUOUS CARBON FIBER-REINFORCED A356 ALUMINUM MATRIX COMPOSITES FABRICATED BY SQUEEZE CASTING pp. 1-13

Ali Alizadeh, Sobhan Kazemi-Fard and Mohsen Hajizamani

EFFECT OF WS2 POWDER DEPOSITION ON MODIFYING THE SURFACE OF Al 6061-T6 THROUGH ELECTRICAL SPARK APPROACH pp. 1-14

R. Rajeshshyam, R. Venkatraman and S. Raghuraman

INFLUENCE OF B4C AND TiN ON THE MICROSTRUCTURE AND WEAR BEHAVIOR OF FRICTION STIR PROCESSED AA7075 SURFACE COMPOSITE pp. 1-14

H. Z. Afra Fathima, C. K. Kevin, K. S. Kishore and J. Sudha

INFLUENCE OF VOLTAGE ON ANODE GAS COMPOSITIONS DURING PLASMA ELECTROLYTIC OXIDATION OF 60 VOL.% SiCp/2009 ALUMINUM MATRIX COMPOSITE pp. 1-16

Yizhao Liao, Xingping Wang, Chi Xu, Kejian Wei, Chuanli Gao, Jiancheng Du, Xiaoyue Jin, Fubin Jiang, Wenbin Xue and Yongzhong Zhang

A REVIEW ON UNDERSTANDING OF CORROSION AND PROTECTION STRATEGIES OF MAGNESIUM AND ITS ALLOYS pp. 1-22

Muhammad Junaid Anjum, Vahdat Zahedi Asl, Muhammad Tabish, Qiuxiang Yang, Muhammad Uzair Malik, Hamid Ali, Ghulam Yasin, Jingmao Zhao and Waheed Qamar Khan

EFFECT OF UREA IN THE ELECTROLESS BATH ON THE PLATING RATE, PHOSPHORUS CONTENT AND CORROSION RESISTANCE OF THE Ni–P DEPOSITS pp. 1-7

Tingting Li, Yulu Li, Qiongyu Zhou, Shaobo Zhou, Xiaomin Chen, Ying Wei, Guoguo Cai, Jibo Jiang and Sheng Han

HEMATITE NANOPARTICLES-EMBEDDED ACTIVATED CARBON FOR ENHANCING REMOVAL OF POLLUTANTS FROM WASTEWATER pp. 1-7

Zezhong Xu, Youpeng Huang and Chengliang Han

A HIGH-PERFORMANCE ELECTRODE FOR SUPERCAPACITORS: CH3NH3PbI3 PEROVSKITE/ MULTIWALLED CARBON NANOTUBE (MAPbI3/MWCNT) COMPOSITES pp. 1-7

Satiye Korkmaz

INVESTIGATION OF CORROSION AND ADHESION BEHAVIORS OF BORONIZED ASP® 2012 STEEL pp. 1-12

Yusuf Kayali, Milat Kul, ŞÜKRÃœ TALAÅž and M. Cemaleddin Yalã‡in

EFFECT OF AUSTEMPERED TEMPERATURE ON THE MICROSTRUCTURE AND PROPERTIES OF B-BEARING CADI pp. 1-12

Yufan Sun, Hanguang Fu, Xingye Guo, Zhenguo Xing, Wenhang Yin and Jian Lin

Volume 29, issue 11, 2022

STUDY ON TOOL WEAR, SURFACE ROUGHNESS AND TOOL VIBRATION UNDER MINIMUM QUANTITY LUBRICATION ENABLED CNC TURNING OF Ti-6Al-4V ALLOY pp. 1-21

Samarjit Swain, Isham Panigrahi, Ashok Kumar Sahoo, Amlana Panda and Ramanuj Kumar

INSIGHTS ON ABRASIVE WATER JET MILLING OF BLIND POCKETS pp. 1-17

K. L. Naresh Raj, N. Yuvaraj and Puneet Tandon

MECHANICAL AND TRIBOLOGICAL CHARACTERIZATION OF HYBRID Al6061/B4C/Gr COMPOSITES BY STIR CASTING TECHNIQUE pp. 1-13

C. Ramesh Kumar, A. Balaji, P. Prabhu and R. Gokuldass

THERMAL CHARACTERISTICS OF NONLINEAR CONVECTION AND RADIATION FOR THE FLOW OF TRI-HYBRID NANOFLUIDS OVER STRETCHABLE SURFACE WITH ENERGY SOURCE pp. 1-13

Saleem Nasir, Sekson Sirisubtawee, Taza Gul, Pongpol Juntharee, Wajdi Alghamdi and Ishtiaq Ali

SURFACE TOPOGRAPHY AND OPTIMAL MACHINING CHARACTERISTICS INVESTIGATION FOR ADVANCED ENGINEERING MATERIAL INCONEL 825 ALLOY EXPLORING STATISTICAL TGRA ACCOMPANIED WITH T-TOPSIS METHODOLOGY pp. 1-28

Nitin Kumar Sahu, Mukesh Kumar Singh, Atul Kumar Sahu and Anoop Kumar Sahu

EXPERIMENTAL ASSESSMENT AND TOPSIS OPTIMIZATION OF CUTTING FORCE, SURFACE ROUGHNESS, AND SOUND INTENSITY IN HARD TURNING OF AISI 52100 STEEL pp. 1-16

Mohammad Rafighi, Mustafa Özdemir, ŞAHINOĞLU Abidin, Ramanuj Kumar and Sudhansu Ranjan Das

DEVELOPMENT OF AN ANODE BASED ON PALLADIUM DEPOSITED ON A CONDUCTIVE POLYMER FOR GLUCOSE OXIDATION pp. 1-7

Imene Chikouche, Charif Dehchar, Ahmed Zouaoui, Abdelkrim Chia and Zohir Cherora

SYNTHESIS OF GO-PEDOT:PSS NANOCOMPOSITES AND STUDY OF THEIR ELECTRICAL PROPERTIES FOR NO2 GAS SENSOR APPLICATION pp. 1-7

Mohammed Jawad Kadhim, Noor Raed Hadi, Safa H. Mohammed and Mustafa K. A. Mohammed

EXPERIMENTAL INVESTIGATION ON THE PERFORMANCE OF COPPER-BASED MWCNT COMPOSITE ELECTRODE IN EDM pp. 1-12

Prosun Mandal and Subhas Chandra Mondal

INVESTIGATIONS ON THE MECHANICAL ALLOYING PROPERTIES OF AL 2024 ALLOY BY THREE-DIMENSIONAL BALL MILL pp. 1-11

Gurkan Soy and Salih Korucu

STUDY ON THE INFLUENCE OF ZINC-COATED WIRE MATERIAL ON 3D PROFILE MACHINING OF INCONEL 825 ALLOY USING WEDM PROCESS pp. 1-11

S. Arulselvan, D. Ravindran, G. Selvakumar and A. Arul Marcel Moshi

EXPERIMENTAL DETERMINATION OF BIOFILM AND MECHANICAL PROPERTIES OF SURFACES OBTAINED BY CO2 LASER GAS-ASSISTED NITRIDING OF Ti–6Al–4V ALLOY pp. 1-11

Levent Urtekin, ÅžEYHMUS Aydin, Ali Sevim, Kadir Gã–k and Ä°brahim Uslan

CHAIN-LIKE ZERO-VALENT IRON FOR FAST DEGRADATION OF METHYL ORANGE (MO) IN WASTEWATER pp. 1-8

Bin Wu, Li Yao, Xianzhi Cao, Yihe Huang, Zezhong Xu and Chengliang Han

THE GROWTH OF PRECIPITATES IN A SOLUTION WITH CROSS DIFFUSION BETWEEN SOLUTES pp. 1-10

Mingli Zhang, Mingwen Chen, Chunmei Yang and Zidong Wang

PREDICTION OF NANO-COATED TOOL WEAR USING BAT AND WHALE OPTIMIZATION ALGORITHMS pp. 1-18

Senthil Kumaran Selvaraj, Jayakumar Kaliappan, S. Ramesh Kumar, Chander Prakash, Dharam Buddhi, Lovi Raj Gupta and Haitham M. Hadidi

Volume 29, issue 10, 2022

MACHINE LEARNING-BASED MODELING AND OPTIMIZATION IN HARD TURNING OF AISI D6 STEEL WITH ADVANCED AlTiSiN-COATED CARBIDE INSERTS TO PREDICT SURFACE ROUGHNESS AND OTHER MACHINING CHARACTERISTICS pp. 1-24

Anshuman Das, Sudhansu Ranjan Das, Jyoti Prakash Panda, Abhijit Dey, Kishor Kumar Gajrani, Nalin Somani and Nitin Kumar Gupta

INFLUENCE OF WEDM-TEXTURED TOOLS ON THE MACHINABILITY OF TITANIUM GRADE-23 ALLOY pp. 1-21

Rima Singha Roy and Kalipada Maity

EFFECT OF PROCESS PARAMETERS IN MICRO-HOLE MACHINING ON α–β Ti-ALLOY USING ECμM WITH NONAQUEOUS ELECTROLYTE OF (CH2OH)2–NaBr pp. 1-13

K. Arumugam, G. Kumaresan and R. Damodaram

DRILLING PARAMETRIC ANALYSIS OF PERFORATED COPPER FOIL ON HEMP/ SISAL FIBER COMPOSITE USING SEQUENTIAL ANN pp. 1-13

Prabu Krishnasamy, M. Geetha, G. Rajamurugan, B. Muralidharan and Ravi Krishnaiah

EFFECT OF FRICTIONAL HEATING ON MECHANICALLY MIXED LAYERS DURING DRY SLIDING CONTACT OF Ti-6Al-4V ALLOYS AT HIGH TEMPERATURE IN VACUUM CONDITION pp. 1-15

Basant Lal, Abhijit Dey and M. F. Wani

A COMPARATIVE STUDY ON THE SINGLE AND DOUBLE-LAYERED DEPOSITION OF ALUMINUM 6063 OVER EN8 MEDIUM CARBON STEEL USING FRICTION SURFACING pp. 1-15

Dillip Kumar Sahoo, Bhulok Sundar Mohanty and G. B. Bhaskar

LASER CLADDING REMANUFACTURING TECHNOLOGY AND ITS APPLICATION IN MOULD pp. 1-23

Hui Yang, Xuefeng Yang, Keyang Chen, Yifeng Zhang, Guojie Lv, Yalong Gao and Wanyang Li

INVESTIGATION OF WEAR AND MICROSTRUCTURAL PROPERTIES OF A356/ TiC COMPOSITES FABRICATED BY FSP pp. 1-10

Mostafa Akbari, Parviz Asadi and Hossein Rahimi Asiabaraki

THE PREPARATION AND CHARACTERIZATION OF A CERIUM-BASED RARE EARTH CONVERSION COATING ON MAGNESIUM ALLOY AZ91D AND ITS DEGRADATION IN 3.5% NaCl SOLUTION pp. 1-10

Lihuizi Su, Pei Zhang, Yong Zhou, Baomin Fan and Fuan Yan

NEW GENERATION NANO-CBN CUTTING TOOL FOR INCREASING SUSTAINABILITY OF HARD TURNING PROCESS pp. 1-10

Mohammad Reza Nayeri and Mohammad Mahdi Abootorabi

ELECTRODEPOSITION OF NICKEL ON HEAT-TREATED LOW CARBON STEEL FOR YAM POUNDING BEATER pp. 1-14

Daniel Toyin Oloruntoba, Olanike Mary Oluwafemi, Olanrewaju Seun Adesina, Olufemi Oluseun Sanyaolu, Adeolu Adesoji Adediran and Peter Pelumi Ikubanni

ELECTRODEPOSITION BASED DEVELOPMENT OF Ni–TiN–AlN AND Ni–SiC–Cr COMPOSITE COATINGS FOR TUNGSTEN CARBIDE CUTTING TOOLS pp. 1-14

Abhineet Saini, B.â S. Pabla and S.â S. Dhami

INFLUENCE OF TiC CONTENT ON MICROSTRUCTURE AND PROPERTIES OF AlCoCrFeNi HIGH-ENTROPY ALLOY COATINGS PREPARED BY LASER CLADDING pp. 1-9

Zhaotong Li, Cainian Jing, Yan Feng, Zhonglin Wu, Tao Lin, Jingrui Zhao and Lei Liu

OPTIMIZATION OF PROCESS PARAMETERS FOR THE A-TIG WELDING OF INCONEL 617 USING PARTICLE SWARM OPTIMIZATION AND GENETIC ALGORITHM pp. 1-22

S.â Senthil Kumaar, Nanda Naik Korra, K. Devakumaran and K.â Ganesh Kumar

MULTI-RESPONSE OPTIMIZATION AND INVESTIGATION OF DRY SLIDING WEAR BEHAVIOR OF Al7075 SURFACE HYBRID NANOCOMPOSITE USING RESPONSE SURFACE METHODOLOGY pp. 1-18

S. Gobikannan, S. Gopalakannan and P. Sivaraj

Volume 29, issue 09, 2022

THERMAL SPRAYING AND RELATED TECHNOLOGIES FOR THE SURFACE MODIFICATION OF AL ALLOYS: REVIEW pp. 1-18

Baidehish Sahoo, Tanmoy Das and Jinu Paul

EXPERIMENTAL RESEARCH OF PARAMETRIC OPTIMIZATION ON WIRE ELECTRICAL DISCHARGE MACHINING OF AA7075/ZRB2 IN SITU COMPOSITES pp. 1-18

M. Nallusamy, A. G. Karthikeyan and K. Kiran

FINE SURFACE FINISHING OF CIRCULAR TAPERED MOULD CAVITY FOR LIGHT COVERS USING MAGNETORHEOLOGICAL GRINDING PROCESS pp. 1-20

Ankit Aggarwal and Anant Kumar Singh

MODELING AND OPTIMIZING THE TENSILE BEHAVIOR OF DEVELOPED ALUMINUM HYBRID COMPOSITE pp. 1-20

Olanrewaju S. Adesina, Adeolu A. Adediran, Abayomi A. Akinwande, Oluyemi O. Daramola and Olufemi O. Sanyaolu

EFFECTS OF POINT GRINDING SURFACE TEXTURE ON CONTACT AND WEAR CHARACTERISTICS UNDER DRY SLIDING CONDITION pp. 1-9

Caixia Chao, Yan Wang and Shichao Xiu

EFFECT OF LATTICE MISMATCH ON THE MICROSTRUCTURE AND ELECTRICAL PROPERTIES OF LaNiO3 CONDUCTIVE FILMS pp. 1-9

M. W. Zhu, B. D. You, D. C. Shi, T. N. Lu, J. N. Wang, N. Jia and C. Z. Liu

COMPARISON OF THE SUCCESS OF META-HEURISTIC ALGORITHMS IN TOOL PATH PLANNING OF COMPUTER NUMERICAL CONTROL MACHINE pp. 1-9

ÇAÅžKA Serkan, Kadir Gã–k and Arif Gã–k

UNSTEADY THIN HYBRID NANOLIQUID FILM FLOW OVER A STRETCHABLE CYLINDER pp. 1-13

Swatilekha Nag, Susanta Maity, Palky Handique and Utpal Kumar Saha

ULTRA-PRECISION DIAMOND PROCESSING OF BIODEGRADABLE AZ31 ALLOY FOR ORTHOPEDIC APPLICATION pp. 1-13

Chander Prakash, Sunpreet Singh, Vinod Mishra, Rohit Sharma, K. K. Prasad, Vinod Karar, Alokesh Pramanik, S. Shankar and Dharam Buddhi

STRESS ANALYSIS OF INTERLAYER DEFECTS IN THIN-WALLED LINING RECYCLED COMPOSITE PIPE pp. 1-13

Zhaohong Lu, Tao Chen, Yan Xu and Zunce Wang

SUSTAINABLE MACHINING CHARACTERISTICS EVALUATION OF BORING OPERATION UNDER DIFFERENT LUBRICATING CONDITIONS pp. 1-14

Kamal Hassan, Amardeep Singh Kang, Chander Prakash and Gurraj Singh

GRAFTING AMINATED CARBON NANOTUBES ON MOLECULARLY IMPRINTED POLYMERS: SYNTHESIS AND PROPERTY pp. 1-10

Baohe Li, Lian Jiang, Chenran Li, Yurong Wang, Xiaoqian Han and Nong Wang

INVESTIGATION OF SURFACE PROPERTIES AND FeB-Fe2B LAYER FORMATION IN PACK BORONIZING OF CEMENTATION STEEL pp. 1-8

Tanju Teker and Murat Sari

INVESTIGATION OF THERMO-MECHANICAL BEHAVIOR IN BRAKE DISC–PAD COUPLE USING THE FINITE ELEMENT METHOD pp. 1-15

Cansu Ay and Abdullah Demä°r

MICROSTRUCTURE AND TRIBOLOGICAL PERFORMANCE OF SELF-LUBRICATE CLADDING PRODUCED BY TUNGSTEN INERT GAS AND MICROWAVE HYBRID HEATING TECHNIQUES pp. 1-15

G. Suresh, M. R. Ramesh, N. Siva Shanmugam and M. S. Srinath

Volume 29, issue 08, 2022

EVALUATION OF ENERGY CONSUMPTION, CUTTING FORCE, SURFACE ROUGHNESS AND VIBRATION IN MACHINING TOOLOX 44 STEEL USING TAGUCHI-BASED GRAY RELATIONAL ANALYSIS pp. 1-17

BARIŞ ÖZLÜ

WATER-BASED ACRYLIC POLYMER/ZnO–Ag NANOCOMPOSITE COATING FOR ANTIBACTERIAL APPLICATION pp. 1-17

Tien Viet Vu, Mohammad Tabish, Sehrish Ibrahim, Mai Huong Pham Thi, The Huu Nguyen, Cuong Bui van, Thien Vuong Nguyen, Lan Pham Thi, Dai Lam Tran, Tuan Anh Nguyen and Ghulam Yasin

A COMPREHENSIVE REVIEW ON MINIMUM QUANTITY LUBRICATION IN TURNING PROCESS pp. 1-13

A. Balasuadhakar, S. Thirumalai Kumaran, Rendi Kurniawan and Farooq Ahmed

EFFECT OF POST-PROCESSING TECHNIQUE ON THE MECHANICAL, TRIBOLOGICAL BEHAVIOR AND SURFACE CHARACTERISTICS OF 3D-PRINTED ACRYLONITRILE STYRENE ACRYLATE PARTS pp. 1-13

A. Captan Prabakaran, P. Senthil and T. Sathies

BANDGAP ENGINEERING OF PbO/PbTiO3 FOR FERROELECTRIC PHOTOVOLTAICS BY INTERFACE EFFECT pp. 1-7

Lijing Wei, Yinglong Wang, Li Guan and Jianxin Guo

MONITORING OF SURFACE TOPOGRAPHY IN CNC TURNING OF Co–Cr–Mo BIOMATERIAL BY USING ACOUSTIC EMISSION SIGNALS pp. 1-12

Ketan A. Jagtap and Raju S. Pawade

SURFACE MORPHOLOGY AND MACHINABILITY ASPECTS IN WIRE-EDM OF INCOLOY-800 SUPERALLOY: AN EXPERIMENTAL EVALUATION AND MICROSTRUCTURE ANALYSIS pp. 1-28

Ravi Pratap Singh, Ravinder Kataria, Mustufa Haider Abidi, Sudhir Ranjan, Ashutosh Kumar Gupta and Abdulrahman Al-Ahmari

ANALYZING AND MODELING LOCALIZED CORROSION BEHAVIOR OF Ni COATING ON PIPELINE STEEL pp. 1-16

Ting Dai, Jie Zhao, Yanhong Gu, Qiang Guo, Xiaoyu Yang and Lei Zhang

DEPOSITION ANGLE DEPENDENCE OF TANTALUM OXIDE NANOLAYERS ON THE STRUCTURAL AND OPTICAL PROPERTIES AS A FUNCTION OF THICKNESS pp. 1-14

Somayeh Jalilpour Darghlou, Haleh Kangarlou and Vahedeh Razzazi

INSIGHT INTO AN EFFICIENT MICROMIXER WITH STAGGER ABREAST BAFFLES pp. 1-9

Hangda Xie, Ling Wang and Xueye Chen

EFFECT OF DIFFERENT MIG WELDING MODES ON HARD-FACING OF INCONEL 718 ON 321 STAINLESS STEEL pp. 1-11

Karpagaraj Anbalagan, R. Sarala, Manivannan, Shobin Loukkose Rosemary, Hemant Priyadarshi and Muralimohan Cheepu

PRELIMINARY INVESTIGATION OF POWDER-MIXED MICROELECTRICAL DISCHARGE DRILLING OF CFRP COMPOSITE pp. 1-11

Hrishikesh Dutta, Kishore Debnath and Deba Kumar Sarma

INTERFACE MODIFICATION OF SUBSTRATE FOR ENHANCING ADHESIVE STRENGTH OF CVD DIAMOND COATING BY SOLID PARTICLES pp. 1-10

Fasong Ju, Naichao Chen, Chenyi Cao, Dongmei Liu, Jin Zhao and Minyong Zhong

EFFECT OF MECHANICAL AND TRIBOLOGICAL PROPERTIES OF DIAMOND FILMS ON VARIOUS SUBSTRATES pp. 1-10

Jibo Hu and Xiaogang Jian

LASER CLADDING OF COLMONOY 6 PARTICLES ON INCONEL 625 SUBSTRATE: MICROSTRUCTURE AND CORROSION RESISTANCE pp. 1-15

N. Jeyaprakash, Che-Hua Yang and Sundara Subramanian Karuppasamy

Volume 29, issue 07, 2022

MODELING AND GENETIC ALGORITHM INTER-RELATIONSHIP-OPTIMIZED PLASMA-SPRAYED IN718 THERMAL BARRIER COATING STRUCTURE pp. 1-12

Vijay Kumar Dwivedi, Priyanka Sharma and Dipak Kumar

OPTIMIZATION OF TESLA VALVE-TYPED MICROMIXER BASED ON SIMULATED ANNEALING ALGORITHM pp. 1-12

Helin Wang and Xueye Chen

MICROSTRUCTURAL CHANGES OF THE PEO COATING INDUCED BY SILANE-BASED SOL–GEL TREATMENT pp. 1-12

Zhenning Chen, Xiaoqian Geng, Xingyue Yong, Xiaochun Chen and Zhihua Sun

OPTIMIZATION OF EROSION–CORROSION BEHAVIOR OF NICHROME COATED 2205 DUPLEX STAINLESS STEEL USING GREY RELATIONAL ANALYSIS pp. 1-16

Roshan Kuruvila, S.â Thirumalai Kumaran and M.â Adam Khan

INVESTIGATION ON THE THERMAL BEHAVIOR OF FRICTION STUD WELDING OF DISSIMILAR ALUMINUM/MILD STEEL JOINTS pp. 1-13

R. Tharmaraj and N. Rajesh Jesudoss Hynes

SHAPE CONTROL IN SURFACE PATTERNING ATOP SHAPE MEMORY POLYMERS VIA INDENTATION, POLISHING AND SHAPE RECOVERY pp. 1-9

Ayush Prasad and Wei Min Huang

RELATIONSHIP ANALYSIS BETWEEN TWO DIFFERENT METHODS OF SURFACE FRACTAL DIMENSION IN METAL–CERAMIC COATINGS SPUTTERED BY RF-MAGNETRON pp. 1-15

A. Gonzã Lez-Hernã Ndez, E. J. Suã Rez-Domã Nguez, W. Aperador, A. B. Morales-Cepeda, E. F. Izquierdo-Kulich and J. C. Caicedo

NUMERICAL SIMULATION OF 3D T-SHAPED ELECTROOSMOTIC MICROMIXER pp. 1-15

Qiaoyu Feng and Xueye Chen

CHARACTERIZATION OF ELECTRONIC STRUCTURES ON THE ADSORPTION BEHAVIORS OF MERCAPTOPURINE ANTICANCER DRUG FROM SURFACE MACROMOLECULE CALIX[4]AREN AS ADSORBENT BY SPECTRAL STUDIES AND DFT CALCULATIONS pp. 1-11

Mahsa Mahmoudi Karamjavan, Karim Zare, Alireza Monadi Sefidan, Maziar Noei and Ali Farajtabar

RICE EXTRACT-ASSISTED GREEN SYNTHESIS OF Au NANOPARTICLES: CATALYTIC AND SERS ACTIVITIES pp. 1-11

Manish Kumar Singh, Alkadevi Verma, Joysurya Basu, Indrajit Sinha, Prajwal Chettri, Ajay Tripathi, Archana Tiwari and R. K. Mandal

HYDROTHERMAL TEMPERATURE INFLUENCE ON MAGNETIC AND FMR PROPERTIES OF HEMATITE NANOPARTICLES pp. 1-11

Sadeq H. Lafta

EFFECT OF ANNEALING OF Co-DOPED ZnO THIN FILMS ON STRUCTURAL AND MAGNETIC PROPERTIES DEPOSITED BY SOL–GEL/SPIN-COATING TECHNIQUE pp. 1-8

Abdelkader Mohammedi, Miloud Ibrir, Omar Meglali and R. Peã‘a-Garcia

ELECTROCHEMICAL MIGRATION FAILURE OF PURE TIN UNDER BROMIDE-POLLUTED THIN ELECTROLYTE LAYER pp. 1-8

Qiao Zeng, Huikan Chen, Bokai Liao and Xingpeng Guo

INVESTIGATIONS ON FUNCTIONAL PROPERTIES OF Al0.8EuyLa0.2−yTiO3 (y=0.01−0.04) NANOPARTICLES SYNTHESIZED BY HYDROTHERMAL METHOD pp. 1-8

S. Dastagiri, M. V. Lakshmaiah, V. Manjunath, Nanda Kumar Reddy Nallabala, N. Ravi, M. Dhanalakshmi, Chandramohan Kukkambakam, Kummara Venkata Krishnaiah and Vasudevaâ Reddyâ Minnam Reddy

TOWARD QUALITY IMPROVEMENT OF ELECTRODEPOSITED HARD METAL Mo/Cu COATINGS: SUITABILITY FOR CIGS SOLAR CELL APPLICATIONS pp. 1-10

Fatima Nemla and Djellal Cherrad

Volume 29, issue 06, 2022

ANALYSIS OF SiC GRINDING WHEEL WEAR AND SURFACE ROUGHNESS IN MACHINING OF Al2O3 ADVANCED CERAMIC USING REGRESSION MODEL pp. 1-11

P. Kanakarajan, C. Moganapriya, R. Rajasekar, S. Sundaram, M. Syed Thasthagir, S. Soundararajan and K. Manu Barath

TI-ION IMPLANTATION EFFECTS ON THE ELECTRICAL RESISTIVITY, HARDNESS AND MICROSTRUCTURE OF BRASS ALLOY pp. 1-11

Muhammad Shahnawaz and Nawaz Muhammad

FIRST-PRINCIPLES SIMULATION: STUDY OF THE STRUCTURAL, ELECTRONIC, MECHANICAL AND OPTICAL PROPERTIES OF DISULFIDE XS2 (X=Ta, Ti) COMPOUNDS FOR OPTOELECTRONIC APPLICATIONS pp. 1-11

R. M. Arif Khalil, Muhammad Iqbal Hussain, Saba Arshad, Fayyaz Hussain, Anwar Manzoor Rana and Hafiz M. Asif Javed

EFFECT OF COATING TYPE ON TRIBOLOGICAL RESPONSE OF H13 TOOL STEEL pp. 1-8

Mathew Alphonse, V. K. Bupesh Raja and Manoj Gupta

INFLUENCE OF GEOMETRICAL DESIGN ON FRICTION-WELDED AA6061/Ti6Al4V JOINTS FOR WING SPARS OF AIRCRAFT STRUCTURES pp. 1-8

P. Shenbaga Velu, N. Rajesh Jesudoss Hynes and N. J. Vignesh

ELECTRICAL ANALYSIS OF SEMI-FLEXIBLE AND FLEXIBLE DSSCS: COMPARISON STUDY pp. 1-10

C. Ildes and H. Kanbur Cavus

COMPOSITE FABRICATION OF EPOXY AND GRAPHENE OXIDE COATING TO ENRICH THE ANTICORROSION AND THERMAL PROPERTIES OF CARBON-STEEL pp. 1-10

Ahsan Riaz Khan, Tianyu Zhao and Maosheng Zheng

FIRST-PRINCIPLE STUDY OF THE BUCKLING COMPRESSIVE STRAIN INDUCED ON OPTOELECTRONIC ASPECTS OF TWO-DIMENSIONAL B2C NANOSTRUCTURE pp. 1-10

Hamidreza Alborznia

MACHINABILITY INVESTIGATION OF HIGH-STRENGTH 7068 ALUMINUM ALLOY: A POTENTIAL STUDY THROUGH EXPERIMENTATION, SPOTTED HYENA OPTIMIZATION AND ADVANCED MODELING APPROACHES pp. 1-30

Tushar Ranjan Soren, Ramanuj Kumar, Anish Pandey, Ashok Kumar Sahoo, Isham Panigrahi and Amlana Panda

MOFs-DERIVED METAL OXIDES FOR FLEXIBLE SUPERCAPACITORS pp. 1-14

Vivek Sharma, Vinod Kumar Vashistha and Dipak Kumar Das

RELATIONSHIP BETWEEN MICROSTRUCTURE, MECHANICAL PROPERTIES AND WEAR BEHAVIOR OF FRICTION STIR PROCESSED AZ31B ALLOY UNDER VARIOUS MEDIUM pp. 1-14

R. Sankar, C. Rathinasuriyan, M. Puviyarasan and V. S. Senthil Kumar

INVESTIGATION OF MACHINABILITY PERFORMANCE IN TURNING OF Ti–6Al–4V ELI ALLOY USING FIREFLY ALGORITHM AND GRNN APPROACHES pp. 1-17

Ramanuj Kumar, Anish Pandey, Ashok Kumar Sahoo and Mohammad Rafighi

STUDY ON THE HEAT TRANSFER CHARACTERISTICS OF MICROCHANNEL HEAT SINK WITH CANTOR FRACTAL STRUCTURE pp. 1-13

Helin Wang, Chengbai Wu, Yongbiao Ma and Xueye Chen

OPTIMIZATION OF THE FRICTION DRILLING TOOL FOR HOLE MAKING IN COMMERCIAL COPPER PLATE pp. 1-13

V.â K. Bupesh Raja, Mathew Alphonse, M. Sivakumar and Manoj Gupta

AN INVESTIGATION OF ULTRASONIC VIBRATIONS EFFECT ON SURFACE ROUGHNESS IN ALUMINUM 7075 AND AISI 1045 CARBON STEEL DURING END MILLING AND SIDE MILLING OPERATION pp. 1-13

A.â Pourdadash Fardnam, M. Shalvandi and F. Haddad

Volume 29, issue 05, 2022

SYNTHESIS, ELECTROCHEMICAL, ANTIMICROBIAL AND THEORETICAL STUDIES OF FE AND NI MACROCYCLIC COMPLEXES pp. 1-7

Vivek Sharma and Anuj Kumar

RADIATION-INDUCED SURFACE MIGRATION OF TUNGSTEN: CHANNELING ALONG ATOMIC STEPS pp. 1-5

E. V. Sadanov, A. A. Mazilov, I. V. Starchenko, J. A. Gordienko, T. I. Mazilova and I. M. Mikhailovskij

EXPERIMENTAL ANALYSIS OF 3D PRINTED PALLET MODEL THROUGH FUSED DEPOSITION MODELING pp. 1-16

Anil Bairapudi, C. Chandrasekhara Sastry and Chetan Verma

THE RISE OF BOROPHENE AND BOROPHENE NANORIBBONS: A POTENTIAL QUANTUM ELECTRONICS MATERIAL pp. 1-21

Saurabh Kharwar and Sangeeta Singh

A MULTI-OBJECTIVE GREY RELATIONAL APPROACH AND REGRESSION ANALYSIS ON OPTIMIZATION OF DRILLING PROCESS PARAMETERS FOR GLARE FIBER METAL LAMINATES pp. 1-13

K. Logesh, A. Arul Marcel Moshi, S. R. Sundara Bharathi and P. Hariharasakthisudhan

DYNAMIC AND BALLISTIC PERFORMANCE OF GLASS/CARBON FIBER/ALUMINUM 1100 WIRE MESH REINFORCED COMPOSITE pp. 1-13

A. Raja, C. Elanchezhian, M. Arul Murugan and N. Ramanan

CORROSION INHIBITION PERFORMANCE OF COMMIPHORAMYRRHA AND CYMBOPOGON OIL EXTRACT ON A36 CARBON STEEL CORROSION IN SULPHATE AND CHLORIDE ELECTROLYTE pp. 1-18

Roland Tolulope Loto, Victor Jonathan David, Chinazom Victor Iroanyanwu and Bilkisu Chineyeze Suleiman Atane

COMPARATIVE ANALYSIS OF HATCH COVER STOCKING GANTRY CRANE HOOKS MANUFACTURED FROM ST37 AND WELDOX700 STEELS UNDER STATIC LOADING CONDITIONS pp. 1-9

ŞENGÜL Ömer and Menderes Kam

EFFECT OF DOPING THIOUREA IN CdO THIN FILMS FOR ELECTRONIC APPLICATIONS pp. 1-15

M. Soylu and H. Kocuk

SIMULATION STUDY ON THE TUBULAR MICROREACTOR FOR HYDROGEN PRODUCTION BY STEAM REFORMING OF METHANOL pp. 1-15

Zhanpeng Yuan and Xueye Chen

INFLUENCE OF FEMTOSECOND-LASER-INDUCED PERIODIC SURFACE STRUCTURES ON THE TRIBOLOGICAL PERFORMANCE OF CVD NANO-CRYSTALLINE DIAMOND FILMS pp. 1-8

Yuxiao Cui, Ping Guo, Yanling Tian, Dawei Zhang, Houjun Qi and Yujun Cai

ELECTROCHEMICAL, DFT AND MULTISCALE SIMULATION STUDIES ON SELF-ASSEMBLED FILMS OF 2-AMINO-4-METHYL-PYRIDINE INHIBITOR FOR COPPER METAL CORROSION PROTECTION IN 3.5% NaCl MEDIUM pp. 1-10

J. Balaji, S. Ghoreishiamiri, P. Bothi Raja, T. H. Oh and M. G. Sethuraman

EVALUATION OF METALLURGICAL CHARACTERIZATION AND MECHANICAL PROPERTIES OF AA7075/ZrB2 IN SITU AMCs AFTER FRICTION STIR PROCESSING pp. 1-10

M. Nallusamy, K. Kiran and M. Suriyaprakash

IMPACT OF INDIUM DOPING ON ZnO THIN FILM SUBJECTED TO APPROPRIATE UHV TREATMENT CHARACTERIZED BY XPS, XRD, AND PL TECHNIQUES pp. 1-10

Edhawya Hameurlaine, M’HAMED Guezzoul, M’HAMMED Bouslama, Abdellah Ouerdane, Amira Derri, Mahmoud Bedrouni, Kadda Benmohktar Bensassi, Abdelhak Baizid, Mahfoud Abdelkrim and Bachir Kharoubi

STUDY ON ADSORPTION MECHANISM AND CORROSION INHIBITION BEHAVIOR OF DIFFERENT CONCENTRATIONS OF TEA EXTRACTS ON THE SURFACE OF HP13CR STAINLESS STEEL pp. 1-11

Haodong Wu, Peng Gao, Sai Li, Dongxu Chen and Yanwen Zhou

Volume 29, issue 04, 2022

METALLOGRAPHIC STUDY AND WEAR BEHAVIOR OF Cu-BASED FeTi-REINFORCED COMPOSITES pp. 1-8

Serdar Osman Yilmaz, Tanju Teker and SÃœREYYA KARABEYOÄžLU Sencer

SOL–GEL SYNTHESIS AND CHARACTERIZATION OF Sr-DOPED MgMn2O4 WITH PHOTOCATALYTIC PERFORMANCES pp. 1-8

Henni Meriem, Kadi Samir and Benhebal Hadj

EFFECT OF CRYSTALLINE WATER MOLECULES ON THE PREPARATION AND GROWTH OF SUPERHYDROPHOBIC FILMS VIA ELECTRODEPOSITION pp. 1-8

Tan Liu, Yonghui Cui, Xuetian Li, Zhongcai Shao and Zhijiang Liu

CHARACTERIZATION OF DEFECTS IN TUNGSTEN SAMPLES INTERESTED IN PFM STUDIES USING POSITRON ANNIHILATION AND PHOTOLUMINESCENCE SPECTROSCOPY pp. 1-8

M. Torabi, O. Kakuee, S. Sobhanian and M. Kouhi

SYNTHESIS AND CHARACTERIZATION OF MAGNETIC NANOPARTICLES EMBEDDED ON IONIC POLYMER BY CHEMICAL REDUCTION METHOD pp. 1-8

S. Shamaila, Sidra Khalid, Adeel Raza and Rehana Shahid

STATIONARY AND ULTRASONIC NANOPARTICLE ASSEMBLY ON NOTABLE SURFACES pp. 1-11

Imtiaz Ahmad, Rahim Jan, Anmol Riaz and Gul E Nayab

INVESTIGATION OF MACHINABILITY AND GEOMETRY CHARACTERISTICS OF ABRASIVE WATERJET CIRCULAR CUTTING PROCESS ON Ti–6Al–4V ALLOY pp. 1-23

Umanath Karuppusamy, Devika Dakshinamurthy and Rashia Begum Syed Ibrahim

EFFECT OF WC–Cu COMPOSITE ELECTRODES ON MATERIAL DEPOSITION RATE, MICROHARDNESS AND MICROSTRUCTURE OF ELECTRICAL DISCHARGE COATED MAGNESIUM ALLOY pp. 1-9

N. Ananthi, U. Elaiyarasan, V. Satheeshkumar, C. Senthilkumar and S. Sathiyamurthy

MACHINABILITY INVESTIGATION OF CRYOGENICALLY TREATED HARDENED AISI 4140 ALLOY STEEL USING CBN INSERT UNDER SUSTAINABLE FINISH DRY HARD TURNING pp. 1-22

Mohammad Rafighi, Mustafa Özdemir, Anshuman Das and Sudhansu Ranjan Das

A NOVEL HYBRIDIZATION OF SEAGULL ALGORITHM AND COMBINED COMPROMISE SOLUTION (SOA–CoCoSo) IN DRILLING INVESTIGATION OF CARBON NANO-ONION-MODIFIED POLYMER COMPOSITES FOR STRUCTURAL APPLICATION pp. 1-22

Shivi Kesarwani and Rajesh Kumar Verma

APATITIC NANOPOWDERS AND COATINGS: A COMPREHENSIVE REVIEW pp. 1-28

Ravinder Pal Singh and Uma Batra

BONDING PROPERTIES OF Al/Al2O3 BULK COMPOSITES PRODUCED VIA COMBINED STIR CASTING AND ACCUMULATIVE PRESS BONDING pp. 1-7

Saade Abdalkareem Jasim, M. Heydari Vini and S. Daneshmand

THERMAL ANNEALING OF MICRO-OXIDIZED ZINC NITRIDE SPUTTERED THIN FILMS FOR CONVERSION INTO CRYSTALLINE ZnO pp. 1-7

Amjid Iqbal, Arshad Mahmood and Taj Muhammad Khan

WEAR PROPERTIES AND MICROSTRUCTURE OF WC–10Co–4Cr POWDER COATING APPLIED TO CULTIVATOR BLADES VIA HVOF pp. 1-12

Yusuf Dä°lay, GÃœNEY Bekir and Adem Özkan

EXPERIMENTAL STUDY OF PROCESS PARAMETERS ON MACHINING PERFORMANCE IN ELECTRO-DISCHARGE MACHINING OF 6061Al/TiC/Gr COMPOSITES pp. 1-12

S. Jeyaprakasam, M. Kathirselvam, C. Velmurugan and R. Venkatachalam

Volume 29, issue 03, 2022

FACILE SYNTHESIS NITROGEN-DOPED POROUS CARBON BY PYROLYZING BTA WITH EXCELLENT SUPERCAPACITANCE PERFORMANCE pp. 1-11

Dong Liu, Shiya Wu, Yigang Ding and Yongming Hu

EXPERIMENTAL INVESTIGATION OF TRIBOLOGICAL CHARACTERISTICS ON AA7068–ZrB2 IN-SITU AMCs pp. 1-11

M. Nallusamy, S. Nandhakumar and M. Suriyaprakash

MODELING AND MULTI-RESPONSE OPTIMIZATION OF ABRASIVE WATER JET MACHINING USING ANN COUPLED WITH NSGA-II pp. 1-10

Abhimanyu K. Chandgude and Shivprakash B. Barve

STABLE STRUCTURES, MAGNETIC AND ELECTRONIC PROPERTIES OF SMALL BIMETALLIC PtCo NANOALLOYS UP 5 ATOMS: A DFT STUDY pp. 1-10

E. M. Sosa-Hernã Ndez, J. M. Montejano-Carrizales and P. G. Alvarado-Leyva

INVESTIGATION ON THE MORPHOLOGICAL AND THERMAL PROPERTIES OF POLYLACTIC ACID/POLYCAPROLACTONE LOADED WITH HALLOYSITE NANOTUBES AND BASALT FIBER pp. 1-10

A. Arul Jeya Kumar, Niranjan S. Raj, C. Saiprasad and Aghalayam R. Sudhanva

IMPROVEMENT IN HARDNESS AND ELECTROCHEMICAL CORROSION RESISTANCE OF AL-7075 ALLOY BY ARTIFICIAL AGEING pp. 1-10

Rabia Mukhtar, Naveed Afzal, Mohsin Rafique and Ameeq Farooq

NEW INSIGHT INTO THE EFFECT OF NOZZLE DIAMETER ON THE PROPERTIES OF SPRAYED ZnO THIN FILMS pp. 1-10

Abdellah Rahmani, Louardi Remache, Mohammed Guendouz, Nathalie Lorrain, Ali Djermane and Lazhar Hadjeris

OPTIMIZATION OF PROCESS PARAMETERS AFFECTING CUTTING FORCE, POWER CONSUMPTION AND SURFACE ROUGHNESS USING TAGUCHI-BASED GRAY RELATIONAL ANALYSIS IN TURNING AISI 1040 STEEL pp. 1-14

AKGÃœN Mahir

SURFACE STRENGTHENING AND FRICTION WEAR OF THE INNER WALL OF LIQUID SODIUM HYDROSTATIC BEARING pp. 1-13

Hui Yang, Xuefeng Yang, Jinlong Cao, Qimin Hou, Jian Cheng, Shouren Wang and Yalong Gao

INFLUENCE OF WIRE-EDM PARAMETERS ON SURFACE CHARACTERISTICS OF SUPERALLOY MONEL 400 pp. 1-9

N. E. Arun Kumar, A. Suresh Babu, M. Subramanian and C. Pradeep Kumar

ADDITIVE MANUFACTURING PARAMETERS OPTIMIZATION OF Ti6AL4V ELI FOR MEDICAL IMPLANTS pp. 1-9

Vijay Kumar Meena, Parveen Kalra and Ravindra Kumar Sinha

HIGH-TEMPERATURE OXIDATION AND EROSION RESISTANCE OF NI-BASED THERMALLY-SPRAYED COATINGS USED IN POWER GENERATION MACHINERY: A REVIEW pp. 1-30

Gaurav Prashar, Hitesh Vasudev and Lalit Thakur

EFFECT OF ASYMMETRIC LATERAL LINKING GROUPS ON THE ELECTRONIC TRANSPORT IN MOLECULAR DEVICE pp. 1-7

Yamin Wu, Bin Liao, Guoliang Wang and Baoan Bian

SYNTHESIS, LUMINESCENCE PROPERTIES AND APPLICATIONS OF SrMoO4:Eu3+ PHOSPHORS FUNCTIONALIZED WITH POLY(ACRYLIC ACID) pp. 1-7

Jingru Cui, Yaoyao Li, Yuqian Li, Dejia Liu, Haiyun Ma, Yuanyuan Han and Liyong Wang

STRUCTURAL CHARACTERIZATION OF BRASS BY Au-ION IMPLANTATION: SURFACE ANALYSIS pp. 1-12

Muhammad Shahnawaz and Nawaz Muhammad

Volume 29, issue 02, 2022

A REVIEW OF MECHANICAL AND THERMAL PROPERTIES OF PRODUCTS PRINTED WITH RECYCLED FILAMENTS FOR USE IN 3D PRINTERS pp. 1-18

Gurcan Atakok, Menderes Kam and Hanife Bukre Koc

STUDIES ON EFFECT OF Nb SEGREGATION AND FORMATION OF SECONDARY PHASES OF Ni–Cr–Mo CLAD ON 316L SUBSTRATE BY COLD METAL ARC TRANSFER PROCESS pp. 1-18

A. Evangeline, P. Sathiya and B. Arivazhagan

EFFECT OF MICRO-STRUCTURAL GEOMETRY ON LUBRICANT INFILTRATION AND PROPERTY OF SLIPPERY LIQUID-INFUSED POROUS SURFACES pp. 1-12

Mantana Suwan, Nuchjarin Sangwong, Nithi Atthi, Pattaraluck Pattamang, Witsaroot Sripumkhai and Sitthisuntorn Supothina

HARD TURNING PERFORMANCE EVALUATION USING CVD AND PVD COATED CARBIDE TOOLS: A COMPARATIVE STUDY pp. 1-17

Rajashree Mallick, Ramanuj Kumar, Amlana Panda and Ashok Kumar Sahoo

ELECTROCHEMICAL CORROSION BEHAVIOR AND MICROSTRUCTURAL CHARACTERIZATION OF HVOF SPRAYED INCONEL718-Al2O3 COMPOSITE COATINGS pp. 1-14

Hitesh Vasudev, Gaurav Prashar, Lalit Thakur and Amit Bansal

MODELING AND ANALYSIS OF MACHINING PARAMETERS OF ECAP PROCESSED COMMERCIAL PURE ALUMINUM USING RSM AND ANN pp. 1-13

S. Surendarnath, T. Ramachandran and B. Ravisankar

EFFECT OF INPUT PARAMETERS ON THE KEY MACHINABILITY ASPECTS OF NITINOL DURING WEDM pp. 1-13

Himadri Majumder, Adik Yadao and Kalipada Maity

A STUDY ON THE RELATION BETWEEN MORPHOLOGICAL AND CHEMICAL CHANGES AND WETTABILITY MODIFICATION OF POLYETHERSULFONE SURFACE AFTER IRRADIATION WITH A PULSED KrF LASER pp. 1-9

Hedieh Pazokian and Mohammad Reza Rashidian Vaziri

NONISOTHERMAL CRYSTALLIZATION KINETICS OF TERNARY SE60TE30S10 GLASS pp. 1-9

Zaki S. Khalifa and Samy A. Elsayed

INFLUENCE OF BEAM ENERGY OF IONS ON PROPERTIES OF NICKEL NANOWIRES pp. 1-9

Shehla Honey, Jamil Asim, Kaviyarasu Kasinathan, Maaza Malik, Shahzad Naseem, Muhammad Ahsan Mazhar, Hassan Mehmood, Muhammad Arshad Kamran, Ishaq Ahmad and Tingkai Zhao

KINETICS STUDY AND MECHANISM OF ELECTROPHORETIC DEPOSITION: A NEW INSIGHT BY SIGNAL/NOISE ANALYSIS pp. 1-6

Mohammad Sadegh Shakeri

SIMULATION AND IMPROVEMENT OF THE PERFORMANCE OF CdTe SOLAR CELL WITH ULTRATHIN ABSORBER LAYER pp. 1-6

Ebrahim Amoupour, Sajad Gholamrezaei Sarvelat, Javad Hasanzadeh and Ali Abdolahzadeh Ziabari

SPUTTERING OF GOLD AND COPPER SURFACES UNDER LOW ENERGY CESIUM IONS pp. 1-11

Uzair Ahmed, Mohsan Jelani, Najam Ul Hassan, Muhammad Naeem, Tahir Zaman and Shahbaz Ahmad

FABRICATION AND WEAR BEHAVIOR OF PEC/N HARDENED LAYER ON PURE IRON pp. 1-11

Xiaoyue Jin, Lin Chen, Kejian Wei, Ruihong Liu, Jiahao Yu, Wenbin Xue and Hongzhong Shang

APPLICATION OF POLARIZED RESONANCE SYNCHRONOUS SPECTROSCOPY IN CHARACTERIZING THE COMPLEX OPTICAL BEHAVIOR OF CdTe QUANTUM DOTS pp. 1-10

Na Diao, Congling Yang, Shaogui Wu, Jiayang Wang and Peize Wu

Volume 29, issue 01, 2022

ENHANCING HIGH-TEMPERATURE OXIDATION RESISTANCE OF TITANIUM ALLOY WITH KF110-B4C-Ag THROUGH LASER TECHNOLOGY pp. 1-5

Zhao Zhang, Jianing Li, Zhiyun Ye, Cainian Jing, Meng Wang, Tingting Li and Xigui Sun

SYNTHESIS AND CHARACTERIZATION OF DIAMOND FILMS ADDED CO2 AND Ar UNDER CH4/H2 ATMOSPHERE pp. 1-7

Xiaogang Jian and Jibo Hu

PERFORMANCE TEST AND HEAT RESISTANCE OF PHYSICAL AND CHEMICAL COATED IRON OXIDE BLACK PIGMENT pp. 1-12

Ke Yan, Chunyan Bao and Zheng Wang

PREPARATION AND PHOTOCATALYTIC ACTIVITY OF NOVEL PPy/GO/BiVO4 NANOCOMPOSITES pp. 1-13

Hengxin Ren, Yushan Qin and Yuguang Lv

PARAMETER’S INVESTIGATION ON Al2O3 CERAMIC USING LASER TURNING pp. 1-13

Sriram Desikan, Jayaprakash Govindarajulu, Arulkirubakaran David and Bagathsingh Nagarajan

RESEARCH AND REVIEW OF CLAY AND GLASS FIBER REINFORCED POLYESTER NANOCOMPOSITE MATERIALS USING OPTIMIZATION TECHNIQUES pp. 1-22

P. Prabhu, M. Siva Kumar, S. Mohamed Iqbal, A. Balaji and B. Karthikeyan

A REVIEW ON THE INFLUENCE OF PROCESS PARAMETERS AND HEAT TREATMENT ON THE CORROSION PERFORMANCE OF NI-BASED THERMAL SPRAY COATINGS pp. 1-18

Gaurav Prashar and Hitesh Vasudev

INFLUENCE OF TEMPERATURE, IMPINGEMENT ANGLE, VELOCITY AND STANDOFF DISTANCE ON THE EROSION CHARACTERISTICS OF INCONEL 718 AND Ti-6Al-4V pp. 1-18

G. Rajamurugan, Prabu Krishnasamy, Gautam D. Bhushan and P. D. Jeyakumar

EVALUATION OF MATERIAL REMOVAL RATE AND SURFACE ROUGHNESS IN WIRE ELECTRO-DISCHARGE MACHINING OF 10-WT.% ZrO2-REINFORCED AL ALLOY COMPOSITE pp. 1-11

A. Karthikeyan, S. V. Alagarsamy and C. Ilaiya Perumal

EFFECTS OF OVERLOAD AND SUPPLYING OIL ON CRACK GROWTH BEHAVIOR IN MG ALLOYS pp. 1-8

Xuechao Zhang, Chobin Makabe and Tatsujiro Miyazaki

MACHINABILITY ASSESSMENT OF SHAPE MEMORY ALLOY NITINOL DURING WEDM OPERATION: APPLICATION POTENTIAL OF TAGUCHI BASED AHP–DFA TECHNIQUE pp. 1-10

Himadri Majumder, Akhtar Khan, Deepak Kumar Naik and Ch. Sateesh Kumar

EFFECT OF LASER POST-TREATMENT ON MICROSTRUCTURAL AND SLIDING WEAR BEHAVIOR OF HVOF-SPRAYED NiCrC AND NiCrSi COATINGS pp. 1-10

Thavarya Naik, Mahantayya Mathapati, C. Durga Prasad, H. S. Nithin and M. R. Ramesh

MICROWAVE SYNTHESIS, CHARACTERIZATION AND PROPERTIES EVALUATION OF GEMINI IMIDAZOLINE SURFACTANTS BASED ON DIBROMOPROPANE pp. 1-10

Divya Bajpai Tripathy and Mayuri Kumari

TUNABLE ELECTRON-SPIN POLARIZATION BY δ-POTENTIAL IN LAYERED SEMICONDUCTOR NANOSTRUCTURE pp. 1-6

Yong-Hong Kong, Ai-Hua Li, Yan-Jun Gong and Xi Fu

HOT WATER-REPELLENT SUPERHYDROPHOBIC SURFACES WITH LONG-TERM STABILITY pp. 1-9

Ji Seong Choi and Seong Min Kang