Surface Review and Letters (SRL)

1994 - 2025

Current editor(s): S Y Tong

From World Scientific Publishing Co. Pte. Ltd.
Bibliographic data for series maintained by Tai Tone Lim ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 26, issue 10, 2019

CORROSION INHIBITION BEHAVIOR OF BENZOTHIAZINE DERIVATIVE ON LOW CARBON STEEL IN ACID MEDIUM: ADSORPTION AND QUANTUM CHEMICAL INVESTIGATIONS pp. 1-11

Venkatesan Hemapriya, Ill-Min Chung, Kandasamy Parameswari, Subramanian Chitra, Seung-Hyun Kim and Mayakrishnan Prabakaran

THE EFFECT OF ANNEALING TEMPERATURE ON OPTICAL AND PHOTOLUMINESCENCE PROPERTIES OF LiNbO3 pp. 1-11

Makram A. Fakhri, Evan T. Salim, Ahmed W. Abdulwahhab, U. Hashim, Mohamed A. Munshid and Zaid T. Salim

ANNEALING BEHAVIOR OF Ni-TiO2 NANOCOMPOSITES pp. 1-11

Te Niu, Weiwei Chen, Huanwu Chen and Lu Wang

ELECTRICAL CHARACTERIZATION OF METAL JUNCTION FORMED WITH PURE AND POLYANILINE-BLENDED POLY(SCHIFF BASE) POLYMER pp. 1-11

Asghari Gul, Lubna Tabassam and Arshad Saleem Bhatti

MONITORED DEFORMATION BY POTENTIAL-INDUCED DEFECTS IN CH3(CH2)n−1SH SELF-ASSEMBLED MONOLAYERS ON GOLD: EIS STUDY OF CHAIN LENGTH EFFECT ON SUBDIFFUSION AND SAMs’ HETEROGENEITY pp. 1-10

Ahmed Mougari, Mokhtar Zabat and Smail Boudjadar

AN ASSESSMENT ON ELECTRICAL CHARACTERIZATION OF Ni/n-Si SCHOTTKY RECTIFIERS WITH AND WITHOUT Ta2O5 INTERFACIAL OXIDE LAYER pp. 1-8

N. Nanda Kumar Reddy, P. Ananda, V. K. Verma and K. Rahim Bakash

CARBON NANOPARTICLES PREPARED BY LASER ABLATION IN LIQUID ENVIRONMENT pp. 1-8

Khawla Khashan, Majid S. Jabir and Farah A. Abdulameer

Pb-FREE SOLDERS: ESTIMATING OF SOME PHYSICOCHEMICAL AND THERMODYNAMIC PROPERTIES OF TERNARY Cu-Ag-In SYSTEM pp. 1-15

Salma Belmoujoud, Rachida M’chaar and Abdelaziz Sabbar

POLYETHYLENE GLYCOL-FUNCTIONALIZED MAGNETIC (Fe3O4) NANOPARTICLES: A GOOD METHOD FOR A SUCCESSFUL ANTIBACTERIAL THERAPEUTIC AGENT VIA DAMAGE DNA MOLECULE pp. 1-15

Waleed K. Abdul Kadhim, Uday M. Nayef and Majid S. Jabir

MICRO-EMULSION METHOD FOR THE SYNTHESIS AND CHARACTERIZATION OF La, Mn-DOPED Ba3Co2 Fe24O41 Z-TYPE HEXA-NANOFERRITES pp. 1-9

Ghulam Farid, Muhammad Saif, Ghulam Murtaza, Atif Hussain, Muhammad Umair and Muhammad Abdullah Malik

EFFECT OF DIFFUSION PROCESS ON COATING IN HOT-DIPPED ALUMINIZED STEEL pp. 1-9

Yuwen Ding, Xiaochun Chen, Ya Liu and Xuping Su

MULTI-OBJECTIVE OPTIMIZATION OF EDM PROCESS PARAMETERS FOR MACHINING OF HYBRID ALUMINUM METAL MATRIX COMPOSITES (Al7075/TiC/B4C) USING GENETIC ALGORITHM pp. 1-16

K. Ponappa, K. S. K. Sasikumar, M. Sambathkumar and M. Udhayakumar

HIGH-TEMPERATURE FRICTION AND WEAR BEHAVIOR OF A NI-BASED VALVE ALLOY pp. 1-7

Zhi-Yuan Zhu, Jia-Huan Chen, Yuan-Fei Cai and Jian-Qiang Li

EFFECT OF Y2O3 ON MICROSTRUCTURES AND WEAR RESISTANCE OF TiC REINFORCED Ti-Al-Si COATING BY LASER CLADDING ON TC4 ALLOY pp. 1-7

H. X. Zhang, J. J. Dai, Z. W. Ma, X. Y. Wang and N. L. Zhang

TRIBOLOGICAL PROPERTIES OF BRAKE DISCS COATED WITH Cr2O3–40% TiO2 BY PLASMA SPRAYING pp. 1-12

Beki̇r Güney and İbrahi̇m Mutlu

MICROSTRUCTURE AND ELECTROCHEMICAL PROPERTIES OF Ni–B/GO ULTRASONIC-ASSISTED COMPOSITE COATINGS pp. 1-12

Jibo Jiang, Haotian Chen, Liying Zhu, Yaoxin Sun, Wei Qian, Hualin Lin and Sheng Han

Volume 26, issue 09, 2019

THE EFFECT OF TiN, TiAlN, CrAlN, AND TiAlN/TiSiN COATINGS ON THE WEAR PROPERTIES OF AISI H13 STEEL AT ROOM TEMPERATURE pp. 1-14

Levent Kara, Hojjat Gahramanzade Asl and Özcan Karadayi

INVESTIGATION OF STRUCTURAL, OPTICAL, AND DIELECTRIC PROPERTIES OF PVA-KI FOR TEMPERATURE SENSOR APPLICATIONS pp. 1-9

T. A. Hanafy, I. T. Zedan and A. E. Bekheet

ENHANCED MATERIAL REMOVAL RATE AND SURFACE QUALITY IN Ti-6Al-4V BLISK BLADE POLISHING BY GRA-RBF-FA METHOD pp. 1-9

Zhen Chen, Yaoyao Shi and Xiaojun Lin

INFLUENCE OF SUBSTRATE TEMPERATURE ON THE COMPOSITION, ELECTRICAL RESISTIVITY AND INFRARED EMISSIVITY OF PtOx FILMS pp. 1-6

Wenbo Kang, Dongmei Zhu, Xiaoke Lu, Zhibin Huang, Wancheng Zhou and Fa Luo

CORROSION PROTECTION OF AMORPHOUS CARBON COATING FOR THE BIPOLAR PLATES OF PEMFCs pp. 1-6

Gang Chen, Tao Tao, Ping-Ping Gao, Zhi-Yong Xie and Xiao-Bo Wu

OPTIMIZATION AND ANALYSIS OF DRY SLIDING WEAR BEHAVIOR OF STIR CASTED AlSi6Cu4–TiO2 COMPOSITE USING CENTRAL COMPOSITE DESIGN pp. 1-11

Subbarayan Sivasankaran

CRYOGENIC DRILLING OF CARBON FIBER-REINFORCED COMPOSITE (CFRP) pp. 1-11

Uğur Koklu and Sezer Morkavuk

ENHANCEMENT OF ADHESION STRENGTH AND TRIBOLOGICAL PERFORMANCE OF CVD DIAMOND FILMS ON TUNGSTEN CARBIDE SUBSTRATES WITH HIGH COBALT CONTENT VIA AMORPHOUS SiC INTERLAYERS pp. 1-10

Yuanping He, Yu-Xiao Cui and Fang-Hong Sun

THEORETICAL INVESTIGATION OF O2 AND H2O CO-ADSORPTION ON CumCon(m+n=2∼7) CLUSTERS pp. 1-10

Peiying Huo, Xiurong Zhang, Zhicheng Yu and Kun Gao

THE EFFECT OF FIBER REINFORCEMENT ON FRACTURE TOUGHNESS ASSESSMENT OF NANOCLAY FILLED POLYMER COMPOSITES pp. 1-8

S. Arulmurugan and N. Venkateshwaran

PREPARATION OF Cu-SiO2/PA12 COMPOSITE POWDERS BY ELECTROLESS PLATING FOR USE IN SLS PROCESSING pp. 1-8

Chengmei Gui, Zhenming Chen, Chenguang Yao and Guisheng Yang

BIOCOMPATIBILITY STUDY OF α-Fe2O3 NANOPARTICLES PREPARED BY HYDROTHERMAL METHOD pp. 1-8

Sadeq H. Lafta, Ali Abdulrahman Taha, Muhammad M. Farhan and Shaima Y. Abdulfattah

RESEARCH PROGRESS ON TITANIUM-CONTAINING ORGANIC–INORGANIC HYBRID PROTECTIVE COATINGS pp. 1-12

Feifei Guo, Jin Gao and Xiaogang Li

AMORPHOUS/NANOCRYSTALLIZATION OF TiN-TiB2 REINFORCED LASER CLAD COMPOSITES pp. 1-4

Molin Su, Jianing Li, Xuegang Wang and Zhiyuan Liu

EFFECT OF POTASSIUM CYANIDE ETCHING ON STRUCTURAL, OPTICAL AND ELECTRICAL PROPERTIES OF Cu2ZnSnS4 THIN FILMS DEPOSITED BY A MODIFIED SPRAY PROCESS pp. 1-7

Samira Bouzida, El Bachir Benamar, Manale Battas, Guy Schmerber, Zouheir Sekkat, Aziz Dinia, Abdelilah Slaoui, Mohammed Abd-Lefdil and Mohammed Regragui

MODULATION OF THE MICRO/NANOTOPOGRAPHY OF PLASMA-SPRAYED BIOMEDICAL COATINGS FOR ENHANCED OSTEOGENIC ACTIVITY pp. 1-5

Chen Lyu, Zhengjiang Xu, Huaifeng Lu, Wei Tang, Jian Lu, Dandan Ye, Xiaobing Zhao and Guocheng Wang

Volume 26, issue 08, 2019

NANOSCALE DIMPLES AND PERIODIC CORRUGATIONS ON FRACTURE SURFACE OF Zr-BASED BULK METALLIC GLASS COMPOSITE pp. 1-5

Bo Shi, Shiyu Luan and Peipeng Jin

GOLD-PLATED TITANIUM VS CARBON-IMPLANTED TITANIUM AS MATERIAL FOR BIPOLAR PLATES IN PEM FUEL CELLS pp. 1-5

M. S. Vlaskin, A. V. Grigorenko, E. I. Shkolnikov and A. S. Ilyukhin

MICROSTRUCTURES AND WEAR RESISTANCE OF THE ARGON ARC CLAD NICKEL-BASED COMPOSITES ON TITANIUM ALLOY pp. 1-5

Jianing Li, Molin Su and Liwei Zhang

A NOVEL METHOD FOR RAPID FABRICATION OF PMMA MICROFLUIDIC CHIP BY LASER CUTTING AND SEALING INTEGRATION pp. 1-7

Xueye Chen, Tiechuan Li and Qi Gao

HYDROTHERMAL SYNTHESIS OF RED PHOSPHOR La2(MoO4)3 DOPED WITH Eu3+ AND ITS APPLICATION FOR FERRIC IONS ASSAY pp. 1-7

Liyong Wang, Xiaomeng Cai, Jia Li, Qingwei Song, Xue Wang, Yuanyuan Han and Guang Jia

PREPARATION AND CHARACTERIZATION OF TiO2/SERICITE COMPOSITE MATERIAL WITH FAVORABLE PIGMENTS PROPERTIES pp. 1-12

Yu Liang, Wanting Chen, Guang Yang, Hao Ding, Xifeng Hou and Jun Ran

SELF-SURFACE WRINKLING ATOP ACRYLONITRILE BUTADIENE STYRENE (ABS) VIA HEATING-RESPONSIVE SHAPE MEMORY EFFECT pp. 1-12

Li Sun, Tao Xi Wang, Muhammad Hairul Izwan Bin Mohd Zakee, Muhammad Syazwan Bin Rosli, Yun Xiang Lee and Wei Min Huang

ULTRA-HIGH SENSITIVITY VANADIUM–VANADIUM SESQUIOXIDE–VANADIUM (V–V2O3–V) SYMMETRIC TUNNEL JUNCTION DIODE pp. 1-4

Mohamed Abdel-Rahman

ROLE OF CALCINATION TEMPERATURES ON THE STRUCTURAL AND OPTICAL PROPERTIES OF NiO NANOPARTICLES pp. 1-11

H. Mohamed Mohaideen, S. Sheik Fareed and B. Natarajan

THE CURRENT–VOLTAGE CHARACTERISTICS OVER THE MEASUREMENT TEMPERATURE OF 60–400 K IN THE Au/Ti/n-GaAs CONTACTS WITH HIGH DIELECTRIC HfO2 INTERFACIAL LAYER pp. 1-11

Abdulkerim Karabulut, Ikram Orak, Mujdat Caglar and Abdulmecit Turut

USING WBE CONJUNCTION WITH ELECTROCHEMICAL NOISE TO EVALUATE THE CORROSION REGULARITY OF ENAMEL COATING MODIFIED ON MILD STEEL IMMERSED IN CORROSIVE SOLUTION pp. 1-11

Yulin Li, Chuan Chen, Qingdong Zhong, Qian Li and Yufeng Cheng

ANALYZING THE CHARACTERISTICS OF LANDFILL LEACHATE ON EXPANSIVE SOIL AND ITS IMPACT ON LINER MATERIALS REINFORCED WITH DISCRETE RANDOM FIBERS pp. 1-10

R. Rajapriya, N. Poonguzhali and V. Murugaiyan

OPTIMUM FLANK WEAR OF TiAlN-COATED TOOL: TOWARD PRODUCTIVE ROUGH CUTTING OF INCONEL 625 pp. 1-10

A. Akhavan Farid, Mohammad Lotfi and M. Jahanbakhsh

A COMPARATIVE STUDY ON VACUUM AND ATMOSPHERIC PLASMA SPRAYED TANTALUM COATINGS FOR THE MODIFICATION OF TITANIUM IMPLANTS pp. 1-10

Ding Ding, Youtao Xie, Kai Li, Liping Huang and Xuebin Zheng

HIERARCHICAL HETEROSTRUCTURE OF RUTILE TiO2 NANOFLOWER ARRAY ON ANATASE TiO2 SHEET WITH ENHANCED PHOTOCATALYTIC PERFORMANCE pp. 1-8

Min Lai, Haibo Yong, Kun Zhong, Wei Wang, Jialei Huang, Shengnan Yao and Xiaoqing Wang

EFFECTS OF ANNEALING ON THE COMPOSITION, STRUCTURE AND PHOTOCATALYTIC PROPERTIES OF C-DOPED TITANIA FILMS DEPOSITED BY REACTIVE MAGNETRON SPUTTERING USING CO2 AS CARBON SOURCE pp. 1-9

B. Wei, J. L. Xue, H. T. Cao, H. G. Li, F. Wen and Y. T. Pei

Volume 26, issue 07, 2019

INVESTIGATION OF Pt:MgO COMPOSITE FILMS PREPARED BY MAGNETRON SPUTTERING AND PULSED LASER CO-DEPOSITION METHOD pp. 1-5

J. Z. Lou, Y. S. Zhang, X. H. Dai, J. M. Song, Z. N. Li, J. Shi, A. Y. Song and B. T. Liu

DETECTION AND DISCRIMINATION BETWEEN ALPHA PARTICLES AND PROTONS BASED ON PHONONIC CRYSTALS MATERIALS pp. 1-7

Ahmed Mehaney, Mostafa F. Eissa and Arafa H. Aly

EFFECT OF ALLOYING ELEMENTS ON CORROSION POTENTIAL AND CORROSION PROPAGATION PROCESS OF MULTILAYER ALUMINUM-BRAZED SHEET pp. 1-12

Longjun Guo, Jihui Wang, Wenbin Hu and Dejing Zhou

PLASMA-ETCHING AND MODIFICATION OF POLYETHYLENE FOR IMPROVED SURFACE STRUCTURE, WETTABILITY AND OPTICAL BEHAVIOR pp. 1-17

A. Hassan, S. A. Abd El Aal, M. M. Shehata and A. A. El-Saftawy

THE EFFECT OF ANISOTROPIC SURFACE TENSION ON THE LAMELLAR EUTECTIC GROWTH IN DIRECTIONAL SOLIDIFICATION pp. 1-13

Xiaohua Xu and Mingwen Chen

EFFECTS OF NITRITE ANIONS ON SURFACE PASSIVE FILM PROPERTIES FOR Q235 CARBON STEELS pp. 1-8

Yong Zhou, Huiju Huang, Pei Zhang, Dong Liu and Fuan Yan

SURFACE ABLATION OF 52100 BEARING STEEL USING FEMTOSECOND LASER IRRADIATION pp. 1-8

Niroj Maharjan, Wei Zhou and Yu Zhou

GAMMA IRRADIATION-INDUCED CHEMICAL DECOMPOSITION-RELATED BANDGAP ENGINEERING IN SnO2 NANOPARTICLES pp. 1-8

Ishaq Ahmad, Abdul Faheem Khan, Attaullah Shah, Hina Tabassum, Abdulla Diallo, Javed Iqbal, F. I. Ezema and Maaza Malik

EFFECT OF NITROGEN DOPING ON FRICTION AND WEAR PROPERTIES OF THICK TETRAHEDRAL AMORPHOUS CARBON COATING pp. 1-10

Hojun Ryu, Woo Young Lee, Jongkuk Kim and Young-Jun Jang

ELASTO-PLASTIC PROPERTIES OF MO-MODIFIED TI DEDUCED FROM INDENTATION TESTS AND FINITE ELEMENT ANALYSIS pp. 1-11

Yong Ma, Zhao Yang, Shengwang Yu, Bing Zhou, Hongjun Hei, Naiming Lin and Bin Tang

ULTRAFINE CONTROL OF Cu NANOPARTICLES AND THEIR ANTIBIOTIC EFFECT ON E. coli pp. 1-6

Qingbin Wang, Liangyuan Shi, Yun Yang, Hui Huang, Yi Jie, Mingwei Lin, Jianfu Liang, Cheng Liu and Hanbiao Song

THE APPLICATION PROSPECT OF MICROCANTILEVER SENSORS TECHNOLOGY ON MINERAL SURFACE ADSORPTION pp. 1-9

Fei Fang, Fanfei Min, Changguo Xue and Jia Du

EFFECT OF NITROGEN AMOUNT ON TRIBOLOGICAL BEHAVIOR OF PLASMA NITRIDED 31CrMoV9 STEEL pp. 1-9

O. Çomakli, A. F. Yetim, B. Karaca and A. Çelik

INNOVATIVE METHOD FOR PREPARATION OF Fe–Al–Cr INTERMETALLIC FUNCTIONALLY GRADED MATERIAL ON 1045 STEEL WITH UNIQUE TRIBOLOGICAL PROPERTIES pp. 1-9

Xixi Luo, Zhengjun Yao, Pingze Zhang, Xuewei Tao and Yu Chen

THIN PLATE LAMB PROPAGATION RULE AND DISPERSION CURVE DRAWING BASED ON WAVE THEORY pp. 1-14

Meng Yanyu and Yan Shi

ANNEALED In2S3 THIN FILMS PREPARED BY SPRAY TECHNIQUE: REPORT ON THE STRUCTURAL, OPTICAL AND DISPERSION ENERGY PARAMETERS pp. 1-14

Y. Bchiri, N. Bouguila, M. Kraini and S. Alaya

Volume 26, issue 06, 2019

CORROSION PROCESS OF MULTILAYER ALUMINUM-BRAZED SHEET BY EIS AND EN TECHNIQUES pp. 1-16

Longjun Guo, Jihui Wang, Wenbin Hu and Dejing Zhou

MECHANICAL MODELING AND EXPERIMENTAL VALIDATION ON PIEZOCERAMIC BASED ON THE SURFACE-BONDED PZT SENSOR pp. 1-16

Yanyu Meng, Shi Yan and Xiaolong Wen

ELECTROCHEMICAL MIGRATION BEHAVIOR OF Sn-3.0Ag-0.5Cu SOLDER ALLOY UNDER THIN ELECTROLYTE LAYERS pp. 1-7

Bokai Liao, Wenfeng Jia, Ruiyan Sun, Zhenyu Chen and Xingpeng Guo

EFFECT OF FRICTION STIR PROCESSING ON CORROSION BEHAVIOR OF CAST AZ91C MAGNESIUM ALLOY pp. 1-7

Behzad Hassani, Rudolf Vallant, Fathallah Karimzadeh, Mohammad Hossein Enayati, Soheil Sabooni and Kasyap Pradeep

FABRICATION AND TRIBOLOGICAL PROPERTIES OF GRADIENT FINE-GRAINED OXYGEN-BOOSTING LAYER ON ECAP-TREATED PURE TITANIUM SURFACE pp. 1-6

Baosen Zhang, Jiying Wang, Shuaishuai Zhu, Qiangsheng Dong and Zhangzhong Wang

STRUCTURE OF A PHTHALOCYANINE DYE ON ZnO pp. 1-6

Hao Zheng, Yong Xu, Guo-Cai Dong, Jörg Kröger and Richard Berndt

FRETTING FATIGUE BEHAVIOR OF COMBINED PLASMA ZIRCONIUMING AND SHOT PEENING ON Ti6Al4V ALLOY pp. 1-11

Jingang Tang, Daoxin Liu, Xiaohua Zhang, Dongxing Du, Shouming Yu and Chengsong Liu

MOLECULAR ADSORPTION OF NO ON WmMon (m + n≤6) CLUSTERS pp. 1-10

Zhicheng Yu, Xiurong Zhang, Kun Gao and Peiying Huo

EFFECT OF Cr3C2 ADDITION ON THE MICROSTRUCTURE AND PROPERTIES OF LASER CLADDING NiCrBSi COATINGS pp. 1-10

Xuelong Ping, Shuting Sun, Feng Wang, Hanguang Fu, Jian Lin, Yinghua Lin and Yongping Lei

CREATION OF A 3D STRUCTURE BASED ON THE HIGH STRENGTH METALLURGICAL GRAPHENE® pp. 1-8

Łukasz Kaczmarek, Piotr Kula, Tomasz Warga, Łukasz Kołodziejczyk, Petr Louda, Karolína Borůvková, Piotr Niedzielski, Witold Szymański, Lukáš Voleský, Witold Pawłowski and Piotr Zawadzki

GROWTH MECHANISM OF NICKEL-PLATED COATING ON PRIMER-MODIFIED POLY(ETHYLENE TEREPHTHALATE) SHEET pp. 1-8

Zhiping Sun and Junjun Huang

ADJUSTING PORE SIZE AND SHAPE TO ACHIEVE THE DESIRED CAPACITANCE OF BORON-DOPED DIAMOND ELECTRODES pp. 1-13

Jing Zhang, Xiang Yu, Zhen Zhang, Jia Li and Zhi-Yan Zhao

EFFECT OF ANISOTROPIC SURFACE TENSION ON THE MORPHOLOGICAL STABILITY OF DEEP CELLULAR CRYSTAL GROWTH IN DIRECTIONAL SOLIDIFICATION pp. 1-13

Han Jiang, Ming-Wen Chen and Zi-Dong Wang

USE OF SYZYGIUM AROMATICUM EXTRACT AS GREEN CORROSION INHIBITOR FOR MILD STEEL IN 0.5M H2SO4 pp. 1-14

Akhil Saxena, Dwarika Prasad and Rajesh Haldhar

SIMULATION AND EXPERIMENTAL RESEARCH ON ADHESION ENHANCEMENT BETWEEN DIAMOND FILMS AND WC-Co SUBSTRATES BY EMPLOYING AMORPHOUS SiC INTERLAYER pp. 1-9

Yu-Xiao Cui and Fang-Hong Sun

FABRICATION AND CHARACTERIZATION OF TiO2 THIN FILM FOR DEVICE APPLICATIONS pp. 1-9

A. Hosseini, H. H. Güllü, E. Coskun, M. Parlak and C. Ercelebi

Volume 26, issue 05, 2019

GASEOUS ELEMENTAL MERCURY CAPTURE BY NOVEL COPPER-DOPED (Fe2.2Mn0.8)1−δO4 ADSORBENTS pp. 1-13

Ping He, Zhongzhi Zhang, Xianbing Zhang, Jiang Wu and Naichao Chen

PHOTOCATALYTIC PROPERTY AND PHOTOCATALYTIC MECHANISM OF TiO2/Fe2O3 HYBRIDS FOR DEGRADATION OF ORGANIC DYES pp. 1-13

Chuansheng Chen, Qun Fang, Shiyi Cao and Yongxiang Yan

SYNTHESIS AND CHARACTERIZATION OF Fe–ZnO THIN FILMS FOR ANTIMICROBIAL ACTIVITY pp. 1-13

Selma M. H. Al-Jawad, Sabah H. Sabeeh, Ali A. Taha and Hussein A. Jassim

CORRELATION BETWEEN WETTABILITY AND OPTICAL PROPERTIES OF SILVER-BASED THIN FILMS PREPARED BY SPUTTERING METHOD WITH INCLINED SUBSTRATE AND SHADOWING EFFECT pp. 1-12

A. Siabi-Garjan, Sh. Fakhri-Mirzanagh and Y. Azizian-Kalandaragh

RESPONSE TO ASCORBIC ACID ON POLYPYRROLE FILM MODIFIED BY COPPER PARTICLES pp. 1-7

I. Chikouche, C. Dehchar, A. Sahari and N. Loucif

SYNTHESIS OF Ni–Bi–P HOLLOW MICROSPHERES WITH OUTSTANDINGLY HIGH ACTIVITY TOWARD THE CATALYTIC REDUCTION OF p-NITROPHENOL pp. 1-7

Xiangrui Meng, Meifeng Hao, Yiwei Jiang, Xiangzhenyue Sun, Yan Wang and Yuqing Miao

A NOVEL PREPARATION ROUTE FOR ELECTROLESS COPPER PLATING ON SURFACE OF CaCO3 POWDERS pp. 1-5

Zhenming Chen, Shoufa Zhou, Yajun Zhang, Mengru Huang, Le Wan, Yang Li and Junjun Huang

TEM AND FESEM ANALYSIS OF DISSIMILAR JOINTS OF INCOLOY 800 HT AND P91 STEEL ON GTAW PROCESS pp. 1-16

V. Lakshmanan and P. Sathiya

DFT STUDY OF METHYL (CH3) AND HYDROXYL (OH) ADSORPTION ON A GOLD (001) SURFACE pp. 1-16

G. B. Bouka-Pivoteau, M. N’dollo, B. R. Malonda-Boungou, B. Maloumbi, P. S. Moussounda and T. Dintzer

LOW-TEMPERATURE NITRIDING BEHAVIOR OF COMPRESSIVE DEFORMED AISI 316Ti AUSTENITIC STAINLESS STEELS pp. 1-8

Fatih Kahraman, Gökçe Mehmet Gençer, Ayça D. Kahraman, Coşkun Yolcu and Haydar Kahraman

MAGNETIC BEHAVIOR OF Ni-DOPED CuO NANOPARTICLES SYNTHESIZED BY MICROWAVE IRRADIATION METHOD pp. 1-11

C. Thangamani, M. Ponnar, P. Priyadharshini, P. Monisha, S. S. Gomathi and K. Pushpanathan

MILLING FORCE AND SURFACE TOPOGRAPHY OF Ti-6Al-4V TITANIUM ALLOY CLADDED BY THE LASER pp. 1-11

Tao Wang, Yang Li, Jiaqi Liu, Lingchao Qin, Ning Wang, Lifeng Zhang, Hao Wang and Zhan Li

PLASMA PRETREATMENT ON TASAR SILK FABRICS COATED WITH ZnO NANOPARTICLES AGAINST ANTIBACTERIAL ACTIVITY pp. 1-11

K. Vinisha Rani, Bornali Sarma and Arun Sarma

THE RESEARCH OF QUENCHING EFFECT IN GRADIENT-BANDGAP CdSSe NANOWIRE pp. 1-6

Dunwei Liu, Wenjie Zhou, Xia Zhou, Huiyao An, Yuhua Cheng, Xiaoyu Zhang, Zhe Xu and Tao Yu

A REVIEW ON VIBRATION-ASSISTED EDM, MICRO-EDM AND WEDM pp. 1-19

K. P. Maity and M. Choubey

MICROSTRUCTURE PERFORMANCE AND SYNTHESIS OF THE ARGON-ARC CLAD COBALT BASE COMPOSITE COATING pp. 1-4

Jianing Li, Molin Su and Liwei Zhang

Volume 26, issue 04, 2019

PREPARATION AND PROPERTIES OF CASHEW NUT SHELL LIQUID-BASED COMPOSITE REINFORCED BY COCONUT SHELL PARTICLES pp. 1-17

R. Udhayasankar and B. Kathikeyan

TRIBOLOGICAL CHARACTERISTICS OF ELECTROLESS Ni–B–Mo COATINGS AT DIFFERENT OPERATING TEMPERATURES pp. 1-14

Arkadeb Mukhopadhyay, Tapan Kumar Barman and Prasanta Sahoo

STUDY ON SURFACE CHARGING EFFECT ON MASK DURING PLASMA ETCHING PROCESS THROUGH PARTICLE SIMULATION pp. 1-9

P. Zhang

EFFECT OF GRAPHITE ADDITIVES IN ELECTROLYTES ON CHARACTERISTICS OF MICRO-ARC OXIDATION COATINGS ON 7E04 ALUMINUM ALLOY pp. 1-9

Ping Wang, Jun Pu, You Tao Xiao, Wen Jun Hu, Ting Wu, Wen Jie Cao, Ze Yu Gong and Ming Huang

IN-SITU DETECTION OF HEAVY METAL POLLUTION IN SEAWATER WITH DIAMOND COATED ELECTRODES pp. 1-9

Bin Zhao, Jia Li, Xiang Yu, Jing Zhang and Yi Ren

TiO2/GRAPHENE OXIDE HETEROSTRUCTURES FOR GAS-SENSING: INTERACTION OF NITROGEN DIOXIDE WITH THE PRISTINE AND NITROGEN MODIFIED NANOSTRUCTURES INVESTIGATED BY DFT pp. 1-15

Amirali Abbasi and Jaber Jahanbin Sardroodi

MICROSTRUCTURE AND BLUE PHOTOLUMINESCENCE OF HYDROGENATED SILICON CARBONITRIDE THIN FILMS pp. 1-6

Yinqiao Peng, Jicheng Zhou, Guibin Lei, Yuanju Gan and Yuefeng Chen

EXPERIMENTAL INVESTIGATIONS ON THE INFLUENCE OF TiC/GRAPHITE REINFORCEMENT IN WEAR BEHAVIOR OF Al 6061HYBRID COMPOSITES pp. 1-11

S. Jeyaprakasam, R. Venkatachalam and C. Velmurugan

FABRICATION OF SURFACE COMPOSITE BY FRICTION STIR PROCESSING USING A NOVEL DIRECT PARTICLE INJECTION TOOL pp. 1-11

P. Muthukumar, S. Jerome, R. John Felix Kumar and S. Prakash

SPECTROSCOPIC PROPERTIES OF INDIUM-DOPED CdO NANOSTRUCTURES SUPPORTED BY DFT CALCULATIONS pp. 1-8

Mudar Ahmed Abdulsattar, Shatha Shammon Batros and Ali J. Addie

THEORETICAL RESEARCH OF SECONDARY ELECTRON EMISSION FROM NEGATIVE ELECTRON AFFINITY SEMICONDUCTORS pp. 1-12

Ai-Gen Xie, Yang Yu, Ya-Yi Chen, Yu-Qing Xia and Hao-Yu Liu

WETTING AND PREWETTING PHENOMENA IN NEMATIC LIQUID CRYSTAL DISK-LIKE DROPLET pp. 1-7

Erfan Kadivar and Shahram Ahmadi Darani

CHLORINE GAS SENSING OF SnO2 NANOCLUSTERS AS A FUNCTION OF TEMPERATURE: A DFT STUDY pp. 1-7

Mudar Ahmed Abdulsattar, Adeebh L. Resne, Shrok Abdullah, Riyadh J. Mohammed, Noon Kadhum Alared and Elham Hanie Naser

INFLUENCE OF ARGON PRESSURE ON MICROSTRUCTURE AND OPTICAL PROPERTIES OF Zn0.9Se:Co0.1 THIN FILMS PREPARED BY PULSED LASER DEPOSITION pp. 1-7

Shu Feng Li, Li Wang, Xueqiong Su, Dongwen Gao and Le Kong

AMORPHIZATION OF CERIUM MONONITRIDE DURING OXIDIZATION CHARACTERIZED BY OPTICAL MICROSCOPY, SCANNING ELECTRON MICROSCOPY, X-RAY DIFFRACTION AND X-RAY PHOTOELECTRON SPECTROSCOPY pp. 1-7

Wei Liang, Qifa Pan, Yin Hu, Lizhu Luo, Kezhao Liu and Zhengjun Zhang

EFFECT OF LOW-TEMPERATURE ANNEALING ON STRUCTURE AND OPTICAL PROPERTIES OF AMORPHOUS TRIS(8-HYDROXYQUINOLINE) ALUMINUM FILMS pp. 1-5

Feng Jiang, Zhiyong Pang, Huimin Yuan, Zhixian Wei, Wanfeng Xie and Shenghao Han

Volume 26, issue 03, 2019

NATURAL HIBISCUS DYE AND SYNTHETIC ORGANIC EOSIN Y DYE SENSITIZED SOLAR CELLS USING TITANIUM DIOXIDE NANOPARTICLES PHOTO ANODE: COMPARATIVE STUDY pp. 1-6

Swati S. Kulkarni, S. S. Hussaini, Gajanan A. Bodkhe and Mahendra D. Shirsat

STUDY OF Co/Sn MULTILAYER SYSTEM WITH VARIOUS TIN LAYER THICKNESS AND REFLOW TEMPERATURES pp. 1-8

Abdul Faheem Khan and A. S. M. A. Haseeb

APPLICATION OF BACK-PROPAGATION NEURAL NETWORKS FOR CORROSION BEHAVIOR ESTIMATION OF Ni-TiN COATINGS FABRICATED THROUGH PULSE ELECTRODEPOSITION pp. 1-8

Dongjie Guo, Yubing Han, Chunyang Ma, Wanying Yu, Fafeng Xia, Minzheng Jiang and Xiuying Xu

STUDIES ON STRUCTURAL, SURFACE MORPHOLOGICAL, OPTICAL, LUMINESCENCE AND UV PHOTODETECTION PROPERTIES OF SOL–GEL Mg-DOPED ZnO THIN FILMS pp. 1-8

A. Mahroug, B. Mari, M. Mollar, I. Boudjadar, L. Guerbous, A. Henni and N. Selmi

INFLUENCE OF GROWTH TIME ON STRUCTURAL, OPTICAL AND ELECTRICAL PROPERTIES OF TiO2 NANOROD ARRAYS DEPOSITED BY HYDROTHERMAL METHOD pp. 1-9

Selma M. H. Al-Jawad, Odai N. Salman and Nwar A. Yousif

SPECTROSCOPIC ELLIPSOMETRY STUDIES ON ZINC OXIDE THIN FILMS DEPOSITED BY SOL–GEL METHOD WITH VARIOUS PRECURSOR CONCENTRATIONS pp. 1-9

Maryam Motallebi Aghgonbad and Hassan Sedghi

A STUDY ON THE SURFACE QUALITIES OF FOUR POLYMER SUBSTRATE MICROCHANNELS USING CO2 LASER FOR MICROFLUIDIC CHIP pp. 1-9

Zengliang Hu, Xueye Chen and Yi Ren

COMPARISON OF METAL OXIDE-CARBON COMPOSITES DERIVED FROM NATURAL ALGINATE GELS pp. 1-9

Xiao-Feng Tang, Zhen-Guo Yang and Jia-Hui Liang

MICROSTRUCTURE AND PROPERTIES OF COATING OF AlFeCrNiMo HIGH-ENTROPY ALLOY pp. 1-9

Dan Dou, Kun Deng and Jianchen Li

SURFACE CHARACTERISTICS AND WEAR RESISTANCE OF AlCrTiSiN COATINGS AT HIGH TEMPERATURES pp. 1-14

Hui Shen, Weicheng Kong, Weitong Zhou and Dejun Kong

THE INFLUENCE OF ELECTROLYTE STIRRING ON ANODIC GROWTH OF Ni-Ti-O NANOPORES ON NiTi ALLOY pp. 1-5

Ya Zhao, Yanlian Liu, Si Liu, Long Bai, Xiaohong Yao, Bin Tang and Ruiqiang Hang

PHOTONIC BAND GAPS PROPERTIES OF TWO-DIMENSIONAL TERNARY SUPERCONDUCTOR PHOTONIC CRYSTALS pp. 1-12

Hussein A. Elsayed

ABRASIVE WEAR ANALYSIS ON GRAPHENE OXIDE-BASED HYBRID NANOPOLYMER COMPOSITES pp. 1-7

Geetha Rajamani and Jawahar Paulraj

INVESTIGATION ON THE DEPOSITION RATES OF ELECTROLESS Ni–P/NANO-SiC PLATING WITH THE ASSISTANCE OF ELECTROMAGNETIC FIELDS pp. 1-7

Heng-Zhi Zhou, Wen-Hao Wang, Yu-Qiang Gu, Yun-Qiang Bai and Ya-Jun Xue

THE EFFECT OF COPPER ION ON THE FILM FORMATION RATE OF TITANIUM-BASED NANOCERAMIC LAYER ON A MILD STEEL SURFACE pp. 1-7

Alireza Ghanbari and Mohammad Reza Pourhossaini

SYSTEMATIC EXPLORATION OF THE EFFECTS OF CR-DOPING ON MICROSTRUCTURE, INSULATING, AND FERROELECTRIC PROPERTIES OF BiFeO3 THIN FILM pp. 1-7

Huiting Sui, Huajun Sun, Xiaofang Liu, Shanshan Guo, Huan Yang and Renxin Xu

Volume 26, issue 02, 2019

EFFECT OF SUBSTRATE TEMPERATURE ON TANTALUM CARBIDES INTERLAYERS SYNTHESIZED ONTO WC-Co SUBSTRATES FOR ADHERENT DIAMOND DEPOSITION pp. 1-13

Shengwang Yu, Jie Gao, Xiaojing Li, Dandan Ma, Hongjun Hei, Yanyan Shen, Wolong Rong, Xiaoping Liu, Zhiyong He and Bin Tang

OPERATING CAPACITY OF ANTI-OXIDIZING COATING IN HYPERSONIC FLOWS OF AIR PLASMA pp. 1-13

Alexey N. Astapov, Ekaterina L. Kuznetsova and Lev N. Rabinskiy

SURFACE-RELIEF THREE-PORT OUTPUT WITH A CONNECTING LAYER GRATING UNDER THE SECOND BRAGG CONDITION pp. 1-5

Bo Wang, Wenhua Zhu, Hongtao Li, Sufang Yin, Chengyue Su, Li Chen, Liang Lei and Jinyun Zhou

PIEZOELECTRIC MATERIAL AND ONE-DIMENSIONAL PHONONIC CRYSTAL pp. 1-5

Arafa H. Aly, Ahmed Nagaty and Z. Khalifa

OPTIMIZATION OF TURNING PARAMETERS FOR SURFACE INTEGRITY PROPERTIES ON INCOLOY 800H SUPERALLOY USING CRYOGENICALLY TREATED MULTI-LAYER CVD COATED TOOL pp. 1-16

A. Palanisamy and T. Selvaraj

THE EFFECT OF ELECTROLYTE TEMPERATURE AND SEALING SOLUTION IN ANODIZING OPERATION ON HARDNESS AND WEAR BEHAVIOR OF 7075 -T6 ALUMINUM ALLOY pp. 1-7

Saeed Niyazbakhsh, Kamran Amini and Farhad Gharavi

A PROPOSAL FOR MODIFIED GALVANIC CORROSION MODEL: INVESTIGATING EFFECTS OF MICRO-ARC OXIDATION ON Al ALLOY pp. 1-12

Yuanhang Yang, Yanhong Gu, Jian Liang and Wen Yue

SURFACE ROUGHNESS REDUCTION OF Cr-FILMS DEPOSITED FROM NOVEL DEEP EUTECTIC SOLVENT: EFFECT OF ACETYLACETONE pp. 1-12

Azeez Abdullah Azeez Barzinjy

LINSEED OIL AS A NOVEL ECO-FRIENDLY CORROSION INHIBITOR OF CARBON STEEL IN 1 M HCl pp. 1-11

N. Gharda, M. Galai, L. Saqalli, N. Habbadi, R. Ghailane, A. Souizi, M. Ebn Touhami and Y. Peres-Lucchese

THE ROLE OF Br AS DOPANT ON THE STRUCTURAL AND CHARGE TRANSPORT PROPERTIES IN CH3NH3PbI3−x−yBrxCly MIXED-HALIDE PEROVSKITE FOR HYBRID SOLAR CELLS pp. 1-10

Jinfeng Wang, Benguang Zhao, Lei Zhu and Jian Song

Ab initio STUDY OF POINT DEFECTS IN 2D GRAPHENE LAYER pp. 1-10

Fayyaz Hussain, Muhammad Imran, Aisha Siddiqa, Rana M. Arif Khalil, Anwar Manzoor Rana, M. Atif Sattar, Niaz Ahmad Niaz, Hafeez Ullah and Nadeem Ahmad

THE EFFECT OF ANNEALING PRESSURE AND TIME ON THE CRYSTALLINITY OF CZTSe pp. 1-8

Ramazan Katirci and John Michael Walls

SYNTHESES OF LARGE-SIZED SINGLE CRYSTAL GRAPHENE: A REVIEW OF RECENT DEVELOPMENTS pp. 1-14

Qiongyu Li, Tien-Mo Shih and Weiwei Cai

KINETIC BEHAVIOR OF ELEMENTAL MERCURY SORPTION ON CERIUM- AND LANTHANUM-BASED COMPOSITE OXIDES pp. 1-9

Dongjing Liu, Weiguo Zhou and Jiang Wu

THERMAL AND AC ELECTRICAL PROPERTIES OF THIN FILMS PREPARED FROM n-BUTYL METHACRYLATE BY A CAPACITIVELY COUPLED PLASMA REACTOR pp. 1-9

Rahima Nasrin and A. H. Bhuiyan

STRUCTURAL, OPTICAL, ELECTRICAL AND DIELECTRIC PROPERTIES OF PVA-YCl3 FILMS pp. 1-9

E. F. M. El-Zaidia, Saleem I. Qashou, A. A. A. Darwish and T. A. Hanafy

Volume 26, issue 01, 2019

3D FINITE ELEMENT MODELING FOR ESTIMATING KEY MACHINABILITY ASPECTS IN TURNING OF COMMERCIALLY PURE TITANIUM pp. 1-20

Akhtar Khan and Kalipada Maity

INHIBITORY ACTION OF GARLIC EXTRACT IN THE CORROSION OF COPPER UNDER THIN ELECTROLYTE LAYERS pp. 1-9

Zhenyu Chen, Hongyu Cen, Lisha Wei, Yamin Cao and Xingpeng Guo

AMORPHOUS Ni/C MICROSPHERES FOR CATALYTIC HYDROGEN GENERATION THROUGH HYDROLYSIS OF AMMONIA BORANE AND ELECTROCHEMICAL OXIDATION OF UREA pp. 1-9

Hui Zhao, Yanping Tian, Ya Liu and Yuqing Miao

CADMIUM-DOPED Co3O4 THIN FILMS: SYNTHESIS AND CHARACTERIZATION pp. 1-9

Cherifa Dalache, Hadj Benhebal, Bedhiaf Benrabah, Aek Ammari, Abdelmalek Kharroubi and Abdelhak Lakhal

REALIZATION AND CHARACTERIZATION OF A NEW ORGANIC THIN FILM SEMICONDUCTOR pp. 1-6

Imane Tiffour, Salah Bassaid, Abdelkader Dehbi, Abdelkader Belfedal, Abdel-Hamid I. Mourad and Andreas Zeinert

THE BAND ENERGY ENGINEERING ON HIGH EPOXY (OR HYDROXYL) CONTENT GRAPHENE OXIDE pp. 1-8

Banafsheh Alizadeh Arashloo, Mohammad Taghi Ahmadi and Saeed Afrang

SURFACE ROUGHNESS OF ELECTROSPUN NANOFIBROUS MATS BY A NOVEL IMAGE PROCESSING TECHNIQUE pp. 1-10

Bentolhoda Hadavi Moghadam, Shohreh Kasaei and A. K. Haghi

SURFACE MODIFICATIONS OF ACTIVATED CARBON AND ITS IMPACT ON APPLICATION pp. 1-10

Matheus Pego, Janaína Carvalho and David Guedes

INVESTIGATION ON MECHANICAL AND WEAR PROPERTIES OF ZINC-COATED STEEL WIRES REINFORCED LM6 ALUMINIUM ALLOY COMPOSITES BY SQUEEZE CASTING pp. 1-10

Samson Jerold Samuel Chelladurai and Ramesh Arthanari

PROPERTIES OF LOW-LEVEL Sn-DOPED In2S3 FILMS DEPOSITED BY SPRAY PYROLYSIS TECHNIQUE pp. 1-11

N. Bouguila, M. Kraini, J. Koaib, I. Halidou, C. Vázquez-Vázquez, M. A. López-Quintela and S. Alaya

SCATTERING OF A THIN LAYER OVER A NONLINEAR RADIALLY EXTENDING SURFACE WITH MAGNETO HYDRODYNAMIC AND THERMAL DISSIPATION pp. 1-7

Taza Gul

EFFECTS OF ACTIVATED TIME ON STRUCTURAL PROPERTIES OF PLATED PLANT FIBER NONWOVEN SHEETS pp. 1-7

Zhiping Sun, Yajun Zhang and Junjun Huang

OPTICAL PROPERTIES OF THE RAPID ANNEALED OXYGEN-DOPED DIAMOND-LIKE CARBON FILM pp. 1-7

Yi-Min Lu, Guo-Jun Huang, Yan-Long Guo and Shu-Yun Wang

INFLUENCE OF Fe/Si THICKNESS RATIO ON STRUCTURAL AND MAGNETIC PROPERTIES OF Fe3Si FILMS FABRICATED BY SPUTTERING pp. 1-7

Jing Xie, Quan Xie, Rui Ma, Jin Huang and Chong Zhang

A ZERO-EMISSION ELECTROLESS NICKEL PLATING BATH pp. 1-5

Wanmin Liu, Qilong Liu, Lv Xu, Mulan Qin and Jiyong Deng

HIGH PRECISION SIMULATION ON SURFACE POTENTIAL OF CELLULAR ELECTRETS BY CHARGE SIMULATION METHOD pp. 1-5

J. W. Zhang, X. Chen, Y. S. Zhao, Z. Y. Su and R. T. Liu