International Journal of Product Development

2004 - 2025

From Inderscience Enterprises Ltd
Bibliographic data for series maintained by Sarah Parker ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 12, issue 3/4, 2010

Warranty data and effective warranty management pp. 202-219

D.N.P. Murthy and W.R. Blischke

Experimental study of factors influencing maturing data phenomenon in warranty performance indicators pp. 220-234

Bharatendra K. Rai

Product failure root cause analysis during warranty analysis for integrated product design and quality improvement for early results in downturn economy pp. 235-253

Sudripto De, Arindam Das and Ashish Sureka

Automotive warranty data: stratification approach for estimating the mean cumulative function pp. 254-273

Dimitar Christozov, Stefanka Chukova and Jeff Robinson

On prorated servicing costs for two-dimensional warranties with combined repair-replacement strategies pp. 274-295

Raja Jayaraman and Timothy I. Matis

Achieving excellence in product development by resolving quality and warranty issues upstream, while reducing lead-time pp. 296-310

M. Jehanzeb Noor and Daniel E. Whitney

Predicting vehicle cost using the T-method pp. 311-323

Elizabeth A. Cudney, Parthiv A. Shah and Rodney Kestle

The effectiveness study of Double Sampling s charts application on destructive testing process pp. 324-335

Pei-Hsi Lee, Chau-Chen Torng, Jhih-Cyuan Wu and Chun-Chieh Tseng

Developing a trade-off between upgrade action time and warranty length for second-hand electrical components pp. 336-351

Mahmood Shafiee, Mohammad Saidi-Mehrabad and Ezzatollah Asgharizadeh

Impact of complaint management on repurchase intention of consumer technologies: employing the justice theory lens pp. 352-371

Sanjeev Jha, Sridhar R. Papagari Sangareddy, Kevin C. Desouza, DongBack Seo and Chen Ye

Volume 12, issue 2, 2010

Size matters: market orientation and NPD in small and large firms pp. 107-125

Michele O'Dwyer and Ann Ledwith

The integration of new technologies: the stakes of knowledge pp. 126-140

Nicolas Roulet, Patrice Dubois, Ameziane Aoussat and Marc Le Coq

Linking design process activities to the business decisions of the firm: an example from the aerospace industry pp. 141-157

Magnus Lofstrand

A process modelling and simulation approach for business decision support in pre-conceptual product design pp. 158-175

Magnus Lofstrand and Ove Isaksson

Factors affecting new product success in technology companies: the case of Finland pp. 176-198

Matti Haverila

Volume 12, issue 1, 2010

Internal and external R&D collaboration as drivers of the product innovativeness of the German mechanical engineering industry pp. 6-20

Steffen Kinkel and Oliver Som

Risk assessment method in project actor choice pp. 21-48

Franck Marle and Julie Le Cardinal

Supplier-oriented and product life cycle management framework to support virtual organisations pp. 49-66

Nadege Troussier, Farouk Belkadi, Benoit Eynard, Mourad Messaadia and Thierry Gidel

Understanding the rapid evaluation of innovative ideas in the early stages of design pp. 67-83

Marcelo Ferioli, Elies Dekoninck, Steve Culley, Benoit Roussel and Jean Renaud

Design for electronic equipment reliability in complex systems pp. 84-105

Guillaume Poncelin, Aline Cauvin, Mathieu Glade, Patrick Lyonnet and Denis Dufrene

Volume 11, issue 3/4, 2010

Can structures foster creativity and innovation? The propositions based on a Giddens-inspired framework pp. 166-176

Carmen Kobe

Blending creativity and structure in implementing a novel idea pp. 177-195

Ronald C. Beckett

How to create and sustain an open and radical innovation capability in the fuzzy front end: the case of Vodafone Group R&D Germany and selected ongoing radical innovation projects pp. 196-219

Christian Stuer, Stefan Husig and Stefanie Biala

Barriers and obstructive practices for out-of-the-box creativity in groups pp. 220-240

Tea Lempiala

Reshaping the box: creative designing as constraint management pp. 241-255

Martin Stacey and Claudia Eckert

Out-of-the-box creativity and risks: the propositions and future research directions pp. 256-271

Birgit Verworn and Carmen Kobe

Understanding creativity motors and obstacles in product development pp. 272-288

Nicolette Lakemond, Eva Loven and Jonas Detterfelt

Exploring the ideation patterns of ordinary users: the case of mobile telecommunications services pp. 289-309

Peter R. Magnusson, Per Kristensson and Christiane Hipp

Idea management systems for a changing innovation landscape pp. 310-324

Christian Sandstrom and Jennie Bjork

Volume 11, issue 1/2, 2010

Towards an interactive spatial product visualisation: a comparative analysis of prevailing 3D visualisation paradigms pp. 6-24

Eliab Z. Opiyo and Imre Horvath

A CAD system based on haptic modelling for conceptual design pp. 25-46

Monica Bordegoni and Umberto Cugini

Integration of virtual reality and haptics to carry out ergonomic tests on virtual control boards pp. 47-61

Giorgio Colombo, Franco De Angelis and Luca Formentini

The enablers for interactive augmented prototyping pp. 62-88

Jouke Verlinden and Imre Horvath

New methods for virtual design with a focus on composite materials and structural optimisation pp. 89-114

E. Schnack, A. Albers, J. Minx and Q. Lohmeyer

An implementation of resource-negotiating agents in telemanufacturing pp. 115-135

Terence L. Van Zyl, Elizabeth M. Ehlers and Emil Marais

Towards virtual manufacturing: an implementation framework from feasibility to product development pp. 136-162

Howard Harris and Kym Fraser

Volume 10, issue 4, 2010

The representation of module interfaces pp. 291-317

Bernhard Bettig and John K. Gershenson

An integrated product-process-organisation model to manage design systems pp. 318-337

Vincent Robin and Philippe Girard

Conjoint-HoQ: evolving a methodology to map market needs to product profiles pp. 338-368

Andrew Olewnik and Vijay Ganesh Hariharan

A methodology for the performance analysis of product validation and test plans pp. 369-392

Armen Zakarian

Volume 10, issue 1/2/3, 2010

Real-time control of parts input in flexible production systems by the pattern classification and analogy process pp. 3-25

Rizauddin Ramli and Hidehiko Yamamoto

A proposition of 3D inertial tolerancing to consider the statistical combination of the location and orientation deviations pp. 26-45

Pierre-Antoine Adragna, Serge Samper and Maurice Pillet

Modelling and analysis of manufacturing systems: a review of existing models pp. 46-61

Daniel Bergeron, M. Anouar Jamali and Hidehiko Yamamoto

Modelling the mutual dependencies between product architectures and a network of partners pp. 62-86

Marc Zolghadri, Claude Baron and Philippe Girard

Investigation of the potential of implementing Kaizen principles in Jordanian companies pp. 87-100

Mohammad D. Al-Tahat and Murad Eteir

A concurrent engineering system to integrate a production simulation and CAD system for FTL layout design pp. 101-122

Hidehiko Yamamoto and Jaber Abu Qudeiri

Formalisation of design rules to assist conflict detection in collaborative design pp. 123-143

Mohsen Sadeghi, Frederic Noel and Khaled Hadj-Hamou

A study of maintenance contribution to joint production and preventive maintenance scheduling problems in the robustness framework pp. 144-164

Fatima Benbouzid-Sitayeb, Ahcene Bendjoudi, Samir Benkhellat, Christophe Varnier and Noureddine Zerhouni

An artificial immune system-based algorithm to solve linear and loop layout problems in flexible manufacturing systems pp. 165-179

R.M. Satheesh Kumar, P. Asokan and S. Kumanan

Ex-CLASS: Extended Cell formation and LAyout Selection considering production parameters with Sequence data pp. 180-200

A.R. Dixit and P.K. Mishra

The effect of inspection errors on the optimal batch size in reworkable production systems with scraps pp. 201-216

Alireza Haji, Sharam Shadrokh Sikari and Ramin Shamsi

An improved heuristic and an exact algorithm for the 2D strip and bin packing problem pp. 217-240

Abdelghani Bekrar, Imed Kacem, Chengbin Chu and Cherif Sadfi

Selection of alternative routings in real time: DMM and modified DMM rules pp. 241-258

Ahmed Hassam and Zaki Sari

A scatter search algorithm for scheduling optimisation of job shop problems pp. 259-272

M. Saravanan and A. Noorul Haq

Grasp stability analysis of two objects with any friction property in two dimensions pp. 273-289

Takayoshi Yamada, Nobuharu Mimura and Yasuyuki Funahashi