International Journal of Product Development

2004 - 2025

From Inderscience Enterprises Ltd
Bibliographic data for series maintained by Sarah Parker ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 16, issue 3/4, 2012

Designing for to kalon: how the unity of beauty and good inspires interactive product design pp. 187-206

Philip R. Ross, Kees J. Overbeeke, Stephan A.G. Wensveen and Caroline C.M. Hummels

A sound-based protocol to study product emotions pp. 207-224

Weihua Lu and Jean-François Petiot

Assessing emotion in human-product interaction: an overview of available methods and a new approach pp. 225-242

Gaël Laurans, Pieter M.A. Desmet and Paul Hekkert

Remote assessment of intangible product experiences - challenges and implications pp. 243-262

Per Kristav, Anders Warell and Lena Sperling

The role of surprise on persuasion in industrial design pp. 263-283

Edgar R. Rodríguez Ramírez

A development process for functional products: hardware, software, service support system and management of operation pp. 284-303

John Lindström, Magnus Löfstrand, Magnus Karlberg and Lennart Karlsson

Modelling and simulation of functional product system availability and support costs pp. 304-325

Magnus Löfstrand, Sean Reed, Magnus Karlberg, John Andrews, Lennart Karlsson and Sarah Dunnett

Volume 16, issue 2, 2012

Functional product development: what information should be shared during the development process? pp. 95-111

John Lindström, Magnus Löfstrand, Magnus Karlberg and Lennart Karlsson

Investigating features influence in fuzzy modelling of mass perception of non-functional 3D CAD forms pp. 112-139

Sofiane Achiche, Saeema Ahmed-Kristensen, Thomas J. Howard, Tim C. McAloone and Luc Baron

A model for predicting and monitoring industrial system availability pp. 140-157

Magnus Löfstrand, Björn Backe, Petter Kyösti, John Lindström and Sean Reed

The use of methods in new product development - a review of empirical literature pp. 158-184

Marc Graner and Magdalena Mißler-Behr

Volume 16, issue 1, 2012

Concurrent consideration of product usability and functionality: Part II - customising and validating design guidelines for a consumer product (Mountain Touring Bike) pp. 1-16

Aniket Arora and Anil Mital

Concurrent consideration of product usability and functionality: part III - customising and validating design guidelines for a subassembly of a complex consumer product (automobile automatic transmission) pp. 17-25

Aniket Arora and Anil Mital

The importance of technology integration capabilities: evaluating the impact of 3D technologies on product development performance in Japan and China pp. 26-44

Yoko Takeda, Yaichi Aoshima and Kentaro Nobeoka

New Product Development and consumer culture: a review pp. 45-62

Bijan Aryana and Casper Boks

The impact of an intermediate stage between the research stage and the development stage on the performance of integral architecture products pp. 63-76

Hiroki Kamoda, Shigetoshi Sugawa and Akio Nagahira

Innovation Project Portfolio Management: a meta-analysis pp. 77-94

Martin Lerch and Patrick Spieth

Volume 15, issue 4, 2011

Standardisation without standardisation? A case study of Toyota Motor Corporation pp. 157-176

Manuel F. Suarez-Barraza

Concurrent consideration of product usability and functionality: Part I – development of integrated design guidelines pp. 177-204

Aniket Arora and Anil Mital

Global product development: the impact on the product development process and how companies deal with it pp. 205-226

Zaza Nadja Lee Hansen and Saeema Ahmed-Kristensen

Using warm-up stages before measuring preferences for innovative products pp. 227-248

Roland Helm, Christoph Buhren and Reinhold Pabst

Volume 15, issue 1/2/3, 2011

A generalised framework to compass and to support complex product engineering processes pp. 6-25

Albert Albers and Andreas Braun

Methodological enhancements for concept exploration in product design pp. 26-53

Daniele Regazzoni, Davide Russo and Tiziano Montecchi

The use of methods by advanced beginner and expert industrial designers in non-routine situations: a quasi-experiment pp. 54-70

Jaap Daalhuizen and Petra Badke-Schaub

Balancing trust and knowledge protection in inter-organisational product design collaboration pp. 71-89

Diana Volz, Brigitte Petendra, Christian Schilcher and Reiner Anderl

Supporting virtual teamwork in Collaborative Product Development pp. 90-114

Maura Mengoni, Michele Germani, Margherita Peruzzini and Marco Mandolini

Engineering 2.0: an approach to support cross-functional teams in overcoming knowledge-sharing barriers in PSS design pp. 115-134

Marco Bertoni and Andreas Larsson

Capturing constraint evolution: a technique to preserve and handle design knowledge pp. 135-155

Lian Ding, Jason Matthews and Glen Mullineux

Volume 14, issue 1/2/3/4, 2011

Integration of topology optimisation tools and knowledge management into the virtual Product Development Process of automotive components pp. 14-33

Maurizio Muzzupappa, Loris Barbieri and Fabio Bruno

Sharing relevant knowledge within product development pp. 34-52

Regine W. Vroom and Alexander M. Olieman

Ontology development for knowledge representation pp. 53-71

Albert Albers, Hannes Schmalenbach and Quentin Lohmeyer

Towards a trans-disciplinary concept of failure for Integrated Product Development pp. 72-95

L. Del Frate, M. Franssen and P.E. Vermaas

A step-based framework to combine creativity, project management and technical development in industrial innovation pp. 96-117

Davide Polverini, Serena Graziosi and Ferruccio Mandorli

Simulating intertwined design processes that have similar structures: a case study of a small company that creates made-to-order fashion products pp. 118-143

David C. Wynn, Claudia M. Eckert and P. John Clarkson

Aggregate views to manage complex dependency models pp. 144-164

Matthias Kreimeyer

Knowledge Management integration in Occupational Health and Safety systems in the construction industry pp. 165-185

Mario Fargnoli, Margherita De Minicis and Giulio Di Gravio

Volume 13, issue 4, 2011

A holistic derivatives planning approach for platform-based designs pp. 273-297

Dimitrios P. Koumanakos and Emmanuel D. Adamides

The effects of managerial output control and team autonomy on the speed of new product development: the moderating effect of product newness pp. 298-315

Pilar Carbonell and Ana I. Rodriguez-Escudero

On the application of lean principles in Product Development: a commentary on models and practices pp. 316-343

Torgeir Welo

Declarative modelling and transformation of a constrained geometric object pp. 344-361

Mireille Moinet and Philippe Serre

Volume 13, issue 3, 2011

Optimising the design of gearshafts with Knowledge-Based Engineering (KBE): an application to aircraft engines pp. 185-203

A. Corallo, A. Margherita, G. Pascali and G. Turrisi

Managing complex simulation processes: the generalised contact and channel model pp. 204-221

Albert Albers, Hans-Georg Enkler and Jens Ottnad

Realised levels of geometric complexity in additive manufacturing pp. 222-244

Martin Baumers, Chris Tuck and Richard Hague

Comparing internal and alliance-based New Product Development processes: case studies in the food industry pp. 245-261

Nina Veflen Olsen and Geir Gripsrud

Using QFD for eco-design guidelines for product design pp. 262-272

Cholrit Luangjinda, Kentaro Yamamoto, Tamio Fukuda and Katsuhiko Kushi

Volume 13, issue 2, 2011

Free revealing in open innovation: a comparison of different models and their benefits for companies pp. 95-118

Tim Schweisfurth, Christina Raasch and Cornelius Herstatt

Functional product system availability: simulation-driven design and operation through coupled multi-objective optimisation pp. 119-131

Magnus Lofstrand, John Andrews, Magnus Karlberg and Lennart Karlsson

Investigation of the applicability of Design for X tools during design concept evolution: a literature review pp. 132-167

Ming-Chuan Chiu and Gul E. Okudan Kremer

Evidence for using Interactive Genetic Algorithms in shape preference assessment pp. 168-184

Jarod C. Kelly, Gregory H. Wakefield and Panos Y. Papalambros

Volume 13, issue 1, 2011

Computer-aided design synthesis: an application of shape grammars pp. 4-15

Alison McKay, Iestyn Jowers, Hau Hing Chau, Alan De Pennington and David C. Hogg

A global collaborative design framework for sketch-based parametric CAD modelling pp. 16-37

Philip Farrugia, Franklin Balzan and Jonathan C. Borg

Collaborative Simulation Environment for mechanical system design pp. 38-46

Haiwei Wang, Geng Liu, Xiaohui Yang and Zhaoxia He

Application of context knowledge in supporting conceptual design decision-making pp. 47-66

Fayyaz U. Rehman and Xiu-Tian Yan

Proactive Design for Manufacture through decision analysis pp. 67-83

R.J. Holt and C.J. Barnes

Design products to learn and to use pp. 84-94

Stephane Brunel, Marc Zolghadri and Philippe Girard