Mathematics and Computers in Simulation (MATCOM)

1958 - 2025

Current editor(s): Robert Beauwens

From Elsevier
Bibliographic data for series maintained by Catherine Liu ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 93, issue C, 2013

Improving judgmental adjustment of model-based forecasts pp. 1-8

Philip Hans Franses

Are forecast updates progressive? pp. 9-18

Chia-Lin Chang, Philip Hans Franses and Michael McAleer

On a constrained mixture vector autoregressive model pp. 19-28

C.S. Wong

Not all estimators are born equal: The empirical properties of some estimators of long memory pp. 29-42

William Rea, Les Oxley, Marco Reale and Jennifer Brown

Characterising trader manipulation in a limit-order driven market pp. 43-52

R.M. Withanawasam, P.A. Whigham and T.F. Crack

Measuring bias in a term-structure model of commodity prices through the comparison of simultaneous and sequential estimation pp. 53-66

Hiroaki Suenaga

Modelling tail credit risk using transition matrices pp. 67-75

David Allen, A.R. Kramadibrata, Robert Powell and A.K. Singh

Evaluation of the DPC-based inclusive payment system in Japan for cataract operations by a new model pp. 76-85

K. Nawata and K. Kawabuchi

The matching of lead underwriters and issuing firms in the Japanese corporate bond market pp. 86-97

Colin McKenzie and Sumiko Takaoka

Stochastic life table forecasting: A time-simultaneous fan chart application pp. 98-107

J.S.H. Li, A.C.Y. Ng and W.S. Chan

Adaptive survey designs for sampling rare and clustered populations pp. 108-116

Jennifer A. Brown, Mohammad Salehi M., Mohammad Moradi, Bardia Panahbehagh and David R. Smith

Income distribution inequality, globalization, and innovation: A general equilibrium simulation pp. 117-127

T. Fukiharu

Do exchange rates affect consumer prices? A comparative analysis for Australia, China and India pp. 128-138

Shrabani Saha and Zhaoyong Zhang

The impacts of exchange rates on Australia's domestic and outbound travel markets pp. 139-150

Ghialy Yap

Clean development mechanism in China: Regional distribution and prospects pp. 151-163

Jin Hong, Xiumei Guo, Dora Marinova, Fengli Yang and Wentao Yu

Design and implementation of a web-based groundwater data management system pp. 164-174

Takuya Iwanaga, Sondoss El Sawah and Anthony Jakeman

The impact of serial correlation on testing for structural change in binary choice model: Monte Carlo evidence pp. 175-189

Felix Chan, Laurent Pauwels and Johnathan Wongsosaputro

Coercive journal self citations, impact factor, Journal Influence and Article Influence pp. 190-197

Chia-Lin Chang, Michael McAleer and Les Oxley

Volume 92, issue C, 2013

L2–L∞ fuzzy control for Markov jump systems with neutral time-delays pp. 1-13

Shuping He and Fei Liu

An optimal regularization method for space-fractional backward diffusion problem pp. 14-27

Z.Q. Zhang and T. Wei

PCF self-similar sets and fractal interpolation pp. 28-39

Enrique de Amo, Manuel Díaz Carrillo and Juan Fernández Sánchez

A new type of recurrent neural networks for real-time solution of Lyapunov equation with time-varying coefficient matrices pp. 40-52

Chenfu Yi, Yunong Zhang and Dongsheng Guo

Dynamics and simulations of a logistic model with impulsive perturbations in a random environment pp. 53-75

Meng Liu and Ke Wang

Exponentiated Weibull–Poisson distribution: Model, properties and applications pp. 76-97

Eisa Mahmoudi and Afsaneh Sepahdar

Volume 91, issue C, 2013

Optimal control of photovoltaic arrays pp. 1-15

N. Femia, G. Petrone, G. Spagnuolo and M. Vitelli

Intelligent sun-tracking system based on multiple photodiode sensors for maximisation of photovoltaic energy production pp. 16-28

G.M. Tina, F. Arcidiacono and A. Gagliano

Comparison of maximum peak power tracking algorithms for a small wind turbine pp. 29-40

R. Kot, M. Rolak and M. Malinowski

Universal wind turbine working in grid-connected and island operating modes pp. 41-51

Mario Rizo, Marco Liserre, Emilio Bueno, Francisco J. Rodríguez and Francisco Huerta

Methodologies for supervision of Hybrid Energy Sources based on Storage Systems – A survey pp. 52-71

Benoît Robyns, Arnaud Davigny and Christophe Saudemont

Design of a medium voltage power converter-storage devices embedded in a hybrid emergency network for more electrical aircraft pp. 72-90

R. Rigo Mariani, F. Lacressonniere, G. Fontes and X. Roboam

Experimental design and genetic algorithm optimization of a fuzzy-logic supervisor for embedded electrical power systems pp. 91-107

Stefan Breban, Christophe Saudemont, Sébastien Vieillard and Benoît Robyns

Decentralized-coordinated model predictive control for a hydro-power valley pp. 108-118

J. Zárate Flórez, J. Martinez, G. Besançon and D. Faille

Power flow Petri Net modelling for building integrated multi-source power system with smart grid interaction pp. 119-133

B.C. Wang, M. Sechilariu and F. Locment

SOM neural network design – A new Simulink library based approach targeting FPGA implementation pp. 134-149

A. Tisan and M. Cirstea

Simulation-based weight factor selection and FPGA prediction core implementation for finite-set model based predictive control of power electronics pp. 150-166

Thomas J. Vyncke, Steven Thielemans and Jan A.A. Melkebeek

A fully automated reconfigurable calculation engine dedicated to the real-time simulation of high switching frequency power electronic circuits pp. 167-177

T. Ould Bachir, C. Dufour, J. Bélanger, J. Mahseredjian and J.P. David

An FPGA-based approach to the automatic generation of VHDL code for industrial control systems applications: A case study of MSOGIs implementation pp. 178-192

P. Martín, E. Bueno, Fco. J. Rodríguez, O. Machado and B. Vuksanovic

Adaptive sliding mode control of interleaved parallel boost converter for fuel cell energy generation system pp. 193-210

H. El Fadil, F. Giri and Josep M. Guerrero

Selective compensation of voltage harmonics in grid-connected microgrids pp. 211-228

Mehdi Savaghebi, Juan C. Vasquez, Alireza Jalilian, Josep M. Guerrero and Tzung-Lin Lee

A DSP-based implementation of an instantaneous current control for a three-phase shunt hybrid power filter pp. 229-248

S. Rahmani, Ab. Hamadi, K. Al-Haddad and A.I. Alolah

FPGA-based sliding mode direct control of single phase PWM boost rectifier pp. 249-261

M.W. Naouar, B. Ben Hania, I. Slama-Belkhodja, E. Monmasson and A.A. Naassani

Predicting the onset of bifurcation and stability study of a hybrid current controller for a boost converter pp. 262-273

R. Gavagsaz-Ghoachani, M. Phattanasak, J.-P. Martin, S. Pierfederici and B. Davat

Modeling and multi-loop feedback control design of a SEPIC power factor corrector in single-phase rectifiers pp. 274-283

H.Y. Kanaan and K. Al-Haddad

Volume 90, issue C, 2013

Optimal current waveforms for torque control of permanent magnet synchronous machines with any number of phases in open circuit pp. 1-14

F. Baudart, E. Matagne, B. Dehez and F. Labrique

A PWM method for seven- and nine-phase open-end winding motor drives pp. 15-27

N. Bodo, M. Jones and E. Levi

Optimized FPGA design, verification and implementation of a neuro-fuzzy controller for PMSM drives pp. 28-44

Hsin-Hung Chou, Ying-Shieh Kung, Nguyen Vu Quynh and Stone Cheng

Dynamic identification of a synchronous machine using an extended sliding mode observer pp. 45-59

A.R. Meghnous, M.T. Pham and X. Lin-Shi

Hybrid excitation synchronous generator in embedded applications: Modeling and control pp. 60-73

Rita Mbayed, Georges Salloum, Lionel Vido, Eric Monmasson and Mohamed Gabsi

A simple multi-level space vector modulation algorithm for five-phase open-end winding drives pp. 74-85

Martin Jones and I. Nyoman Wahyu Satiawan

ADALINE approach for induction motor mechanical parameters identification pp. 86-97

Hamid Sediki, Ali Bechouche, Djaffar Ould Abdeslam and Salah Haddad

An efficient, simplified multiple-coupled circuit model of the induction motor aimed to simulate different types of stator faults pp. 98-115

M. Bouzid and G. Champenois

Modelling and fast position control of a new unwinding–winding mechanism design pp. 116-131

J. Frechard, D. Knittel, P. Dessagne, J.S. Pellé, G. Gaudiot, J.C. Caspar and G. Heitz

Analysis of the impact of space vector modulation techniques on the operation of ultrahigh speed induction machines pp. 132-144

Péter Stumpf, Rafael K. Járdán and István Nagy

Optimal hardware/software partitioning of a system on chip FPGA-based sensorless AC drive current controller pp. 145-161

I. Bahri, L. Idkhajine, E. Monmasson and M.E.A. Benkhelifa

Overview of analytical models of permanent magnet electrical machines for analysis and design purposes pp. 162-177

Huguette Tiegna, Yacine Amara and Georges Barakat

Bi-criteria optimization design of an interior permanent magnet synchronous machine for a hybrid electric vehicle application pp. 178-191

Phi Hung Nguyen, Emmanuel Hoang and Mohamed Gabsi

Induction machine magnetic noise: Impact of a new stator magnetic circuit design pp. 192-204

Jean-François Brudny, Cristian Demian, Lucian Petrea and Thierry Belgrand

Analytical prediction of cogging torque in surface mounted permanent magnet motors pp. 205-217

F. Baudart, E. Matagne, B. Dehez and F. Labrique

Lumped-parameter-based thermal analysis of a doubly radial forced-air-cooled direct-driven permanent magnet wind generator pp. 218-229

Janne Nerg and Vesa Ruuskanen

Analytical calculation of the flux density distribution in a superconducting reluctance machine with HTS bulks rotor pp. 230-243

Gael Malé, Thierry Lubin, Smail Mezani and Jean Lévêque

Optimal design of electromagnetic devices: Development of an efficient optimization tool based on smart mutation operations implemented in a genetic algorithm pp. 244-255

J. Denies, H. Ben Ahmed and B. Dehez

Manifold mapping optimization with or without true gradients pp. 256-265

B. Delinchant, D. Lahaye, F. Wurtz and J.-L. Coulomb

Unified modeling technique using VHDL-AMS and software components pp. 266-276

A. Rezgui, L. Gerbaud and B. Delinchant