European Journal of Industrial Engineering

2007 - 2025

From Inderscience Enterprises Ltd
Bibliographic data for series maintained by Sarah Parker ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 7, issue 5, 2013

Minimising the total weighted tardiness for non-identical parallel batch processing machines with job release times and non-identical job sizes pp. 529-557

Fuh-Der Chou

Development of lower bounds for the scheduling of setup tasks in serial production lines pp. 558-576

Cédric Pessan, Emmanuel Néron and Mohamed Haouari

Economic order quantity for a power demand pattern system with deteriorating items pp. 577-593

Joaquín Sicilia, Jaime Febles-Acosta and Manuel González-De la Rosa

The median chart with estimated parameters pp. 594-614

Philippe Castagliola and Fernanda Otilia Figueiredo

Production scheduling problem with delivery considerations in a mono-product supply chain environment to minimise the total joint cost pp. 615-634

Olivier Grunder, Deyun Wang and Abdellah El Moudni

A leader-follower game for the point coverage problem in wireless sensor networks pp. 635-656

Mehmet Başdere, Necati Aras, İ. Kuban Altınel and Sezin Afşar

Volume 7, issue 4, 2013

Assessing logistics factors on the business success of the electrical and electronics industry in Thailand pp. 393-415

Navee Chiadamrong and Tinnawat Canova

Selecting industrial investment locations in master plans of countries pp. 416-441

Burak Omer Saracoglu

Data mining model adjustment control charts for cascade processes pp. 442-455

Seoung Bum Kim, Weerawat Jitpitaklert, Victoria C.P. Chen, Jinpyo Lee and Sun-Kyoung Park

An automatic method to reach consensus in a local context for AHP group decision making pp. 456-474

Yucheng Dong, Weijun Xu and Weidong Xu

A comprehensive decision support system for ERP pre-implementation phase pp. 475-496

Jafar Razmi and Mohamad Sadegh Sangari

The effect of inspection error on quality and producer losses: the case of nominal-the-best type quality characteristic and rework pp. 497-528

Gülser Köksal, Aysun Taşeli, Leman Esra Dolgun and İnci Batmaz

Volume 7, issue 3, 2013

Optimisation via simulation: a metamodelling-based method and a case study pp. 275-294

María G. Villarreal-Marroquín, José M. Castro, Óscar Leonel Chacón-Mondragón and Mauricio Cabrera-Ríos

Multiresponse optimisation of powder metals via probabilistic loss functions pp. 295-311

Caglar S. Aksezer and James C. Benneyan

A GRASP approach to transporter scheduling for ship assembly block operations management pp. 312-332

Changkyu Park and Junyong Seo

Exponential smoothing with covariates applied to electricity demand forecast pp. 333-349

José D. Bermúdez

Single-machine group scheduling with a general learning effect pp. 350-369

Yunqiang Yin, Chin-Chia Wu, Wen-Hung Wu and Juei-Chao Chen

Retailer's optimal order and credit policies when a supplier offers either a cash discount or a delay payment linked to order quantity pp. 370-392

Chih-Te Yang, Qinhua Pan, Liang-Yuh Ouyang and Jinn-Tsair Teng

Volume 7, issue 2, 2013

A new formulation technique to model materials and operations planning: the generic materials and operations planning (GMOP) problem pp. 119-147

Jose P. Garcia-Sabater, Julien Maheut and Juan A. Marin-Garcia

Investment timing for a dual channel supply chain pp. 148-174

Yongma Moon and Tao Yao

A stochastic analysis of asynchronous demand in disassembly processes of remanufacturing systems pp. 175-205

Kemal Dinçer Dingeç and Aybek Korugan

Minimising maximum lateness in a single machine scheduling problem with processing time-based aging effects pp. 206-223

Radosław Rudek

The effect of shift distribution on the design and performance of the X and CUSUM charts in monitoring mean and variability pp. 224-247

Mei Yang, Zhang Wu and Tien-I. Liu

Modelling a two-retailer inventory system with preventive lateral transshipment using expected path approach pp. 248-274

Ramidayu Yousuk and Huynh Trung Luong

Volume 7, issue 1, 2013

Profitability evaluation for newsboy-type product with normally distributed demand pp. 2-15

R.H. Su and W.L. Pearn

An optimisation design of the combined np-CUSUM scheme for attributes pp. 16-37

Salah Haridy, Zhang Wu, Fong-Jung Yu and Mohammad Shamsuzzaman

The application of linear programming by the General Electric Company to efficiently allocate routes to trucking companies pp. 38-54

Xu Yang, Sunderesh S. Heragu, Gerald W. Evans, Mark D. Shirkness and Anna Coats

Assessment of model validity of analytic network process using structural equations modelling: an application of supplier evaluation problem pp. 55-77

Yıldız Yuluğkural, Bahadır Yörür, Gülşen Akman and Zerrin Aladağ

Supply chain coordination for short-life-cycle products with option contract and partial backorders pp. 78-99

Hui-Ming Wee and Wan-Tsu Wang

An environment-driven, function-based approach to dynamic single-machine scheduling pp. 100-118

Arezoo Atighehchian and Mohammad Mehdi Sepehri

Volume 6, issue 6, 2012

Disruption management for commercial airlines: methods and results for the ROADEF 2009 Challenge pp. 669-689

Christian Artigues, Eric Bourreau, H. Murat Afsar, Olivier Briant and Mourad Boudia

Disruptions in the airline industry: math-heuristics for re-assigning aircraft and passengers simultaneously pp. 690-712

Raïd Mansi, Saïd Hanafi, Christophe Wilbaut and François Clautiaux

Extending metaheuristics based on bin packing for SALBP to PALBP pp. 713-732

Nathalie Grangeon and Sylvie Norre

Managing reward and risk of the newsboy problem with range information pp. 733-750

Guiqing Zhang, Yinfeng Xu, Yucheng Dong and Hongyi Li

Heuristics for the response time variability problem pp. 751-764

Albert Corominas, Wieslaw Kubiak and Rafael Pastor

Penalty function approaches for ship multidisciplinary design optimisation (MDO) pp. 765-784

Emilio Fortunato Campana, Giovanni Fasano and Daniele Peri

Volume 6, issue 5, 2012

A review of condition-based maintenance decision-making pp. 519-541

Rosmaini Ahmad and Shahrul Kamaruddin

Bundling in a supply chain: insights and implications pp. 542-571

Chirag Surti and Elkafi Hassini

The performance of combinatorial priority rules in a manufacturing flow shop pp. 572-595

Felix T.S. Chan and Hing Kai Chan

Solving the single machine scheduling problem with general job-dependent past-sequence-dependent setup times and learning effects pp. 596-628

H.M. Soroush

A comparison of semantic and spatial stimulus-response compatibility effects for human-machine interface design pp. 629-643

Alan H.S. Chan and Calvin K.L. Or

Parameter estimation for the Birnbaum-Saunders distribution under an accelerated degradation test pp. 644-665

Jyh-Wen Ho

Volume 6, issue 4, 2012

A two-phase methodology for modular product customisation pp. 391-421

Hazem J. Smadi, Ali K. Kamrani and Sa'Ed M. Salhieh

The development of a hierarchical rough-cut capacity planning model and demand management system for fishing-net manufacturing pp. 422-440

Chiung-Hsi Hsieh, Taho Yang, Chao-Ton Su and Cheng-Han Lin

Some polynomial solvable single-machine scheduling problems with a truncation sum-of-processing-times-based learning effect pp. 441-453

Chin-Chia Wu, Yunqiang Yin, Wen-Hsiang Wu and Shuenn-Ren Cheng

Resolution of the two-part cyclic hoist scheduling problem with bounded processing times in complex lines' configuration pp. 454-473

Adnen El Amraoui, Marie-Ange Manier, Abdellah El Moudni and Mohamed Benrejeb

Scheduling a bi-criteria flowshop manufacturing cell with sequence-dependent family setup times pp. 474-496

Shih-Wei Lin and Kuo-Ching Ying

Online scheduling of flexible job-shops with blocking and transportation pp. 497-518

Jens Poppenborg, Sigrid Knust and Joachim Hertzberg

Volume 6, issue 3, 2012

Revised simplex method and its application for solving fuzzy linear programming problems pp. 259-280

S.H. Nasseri, H. Attari and A. Ebrahimnejad

The use of a simulation, a hybrid Taguchi, and dual response surface methods in the automated material handling system tool-to-tool strategy for a 300-mm fab pp. 281-300

Taho Yang, Yu-An Shen, Chiwoon Cho and Yu-Ru Lin

The pipeline and valve location problem pp. 301-321

Gilbert Laporte and Marta M.B. Pascoal

Material and process selection in product design using decision-making technique (AHP) pp. 322-346

Salil Desai, Bopaya Bidanda and Michael R. Lovell

A Bayesian approach for measuring process performance with asymmetric tolerances pp. 347-368

Chien-Wei Wu

An improved approach for constructing lower confidence bound on process yield pp. 369-390

Chien-Wei Wu, Mou-Yuan Liao and James C. Chen

Volume 6, issue 2, 2012

Outsourcing and production scheduling technology adoption in Taiwan: an empirical study pp. 139-152

Shu-Yun Peng, Hui-Ming Wee and Jui-Chin Jiang

Integrated cooperative inventory models with one vendor and multiple buyers in the supply chain pp. 153-176

Ming-Feng Yang and Yi Lin

Permutation flowshops in group scheduling with sequence-dependent setup times pp. 177-198

B. Naderi and Nasser Salmasi

Minimising makespan for multistage hybrid flowshop scheduling problems with multiprocessor tasks by a hybrid immune algorithm pp. 199-215

Kuo-Ching Ying

The transportation value stream map (TVSM) pp. 216-233

Bernardo Villarreal

Solving the optimal process target problem using computer-generated experimental designs pp. 234-258

Paul L. Goethals and Byung Rae Cho

Volume 6, issue 1, 2012

A hybrid PSO-SA algorithm for the travelling tournament problem pp. 2-25

Alireza Tajbakhsh, Kourosh Eshghi and Azam Shamsi

Optimal ordering policy in response to a temporary sale price when retailer's warehouse capacity is limited pp. 26-49

Chih-Te Yang, Liang-Yuh Ouyang, Kun-Shan Wu and Hsiu-Feng Yen

A hybrid algorithm for fuzzy clustering pp. 50-67

Z.H. Che

Inventory systems with variable capacity pp. 68-86

Ilkyeong Moon, Byung-Hyun Ha and Jongchul Kim

Users' perceptions of usability and aesthetics as criteria of pre- and post-use preferences pp. 87-117

Sangwon Lee and Richard J. Koubek

Lean Six Sigma (LSS): an implementation experience pp. 118-137

Satya S. Chakravorty and Aakash D. Shah