European Journal of Industrial Engineering

2007 - 2025

From Inderscience Enterprises Ltd
Bibliographic data for series maintained by Sarah Parker ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 2, issue 4, 2008

Heuristic approaches for determining minimum cost delivery quantities in supply chains pp. 377-400

Alexander Hornung and Lars Monch

Generic approach for the customisation of the TPM programme: using the process transformation model and reliability assessment tool pp. 401-427

Mustafa M. Rashid and Hossam Ismail

Estimating parameters of the three-parameter Weibull distribution using a neural network pp. 428-445

Babak Abbasi, Luis Rabelo and Mehdi Hosseinkouchack

Multi-item, economic order quantity model with permissible delay in payments and a budget constraint pp. 446-460

Srimathy Mohan, Gopalakrishnan Mohan and Ashok Chandrasekhar

Optimising the service capacity by using a speed-up simulation pp. 461-478

Fermin Mallor Gimenez, Pedro M. Mateo Collazos and Isolina Alberto Moralejo

On the choice of a demand distribution for inventory management models pp. 479-491

Katrien Ramaekers and Gerrit K. Janssens

Volume 2, issue 3, 2008

Deadlock-free scheduling of flexible job shops with limited capacity buffers pp. 231-252

Sherif A. Fahmy, Tarek Y. ElMekkawy and Subramaniam Balakrishnan

Demand signal modelling: a short-range panel forecasting algorithm for semiconductor firm device-level demand pp. 253-278

Russell J. Elias, Douglas C. Montgomery, Stuart A. Low and Murat Kulahci

A novel differential evolution algorithm for no-idle permutation flow-shop scheduling problems pp. 279-297

Quan-Ke Pan and Ling Wang

An ant colony algorithm for cell-formation in cellular manufacturing systems pp. 298-336

N. Megala, Chandrasekharan Rajendran and Ram Gopalan

A time-varying lot size method for the economic lot scheduling problem with shelf life considerations pp. 337-355

Jiyin Liu, Lina Wu and Zhili Zhou

A methodology to enhance equipment performance using the OEE measure pp. 356-376

Anil S. Badiger, R. Gandhinathan and V.N. Gaitonde

Volume 2, issue 2, 2008

The splittable pickup and delivery problem with reloads pp. 112-133

H.L.M. Kerivin, M. Lacroix, A.R. Mahjoub and A. Quilliot

An adaptive algorithm for the knapsack problem: perturbation of the profit or weight of an arbitrary item pp. 134-152

Mhand Hifi, Hedi Mhalla and Slim Sadfi

An unrelated parallel machines model for an industrial production resetting problem pp. 153-171

Cedric Pessan, Jean-Louis Bouquard and Emmanuel Neron

Operating theatre scheduling using Lagrangian relaxation pp. 172-189

V. Augusto, X. Xie and V. Perdomo

Modelling and solving a multimode and multisite industrial problem: Lagrangean relaxation and heuristic approaches pp. 190-206

Michel Gourgand, Sylverin Kemmoe Tchomte and Alain Quilliot

Lot-splitting for inspection in a synchronised two-stage manufacturing process with finite production rates and random out-of-control shifts in the first stage pp. 207-229

Elkafi Hassini and Raymond G. Vickson

Volume 2, issue 1, 2008

Establishment of semiconductor equipment purchasing evaluation model based on a knowledge management database pp. 1-16

Ching-Chow Yang, Bai-Sheng Chen, Shu-Yun Peng, Tsu-Ming Yeh and Lung-Chia Wang

A study on human-task-related performances in converting conveyor assembly line to cellular manufacturing pp. 17-34

Ikou Kaku, Yasuhiko Murase and Yong Yin

Forming relationships with stakeholders in engineering projects pp. 35-49

Jan Terje Karlsen

A survey of the literature on the multiple or parallel assembly line balancing problem pp. 50-72

Amaia Lusa

The reference installation approach for the estimation of industrial assets at risk pp. 73-93

Jutta Geldermann, Mirjam Merz, Valentin Bertsch, Michael Hiete, Otto Rentz, Isabel Seifert, Annegret H. Thieken, Dietmar Borst and Ute Werner

Spare parts criticality for unplanned maintenance of industrial systems pp. 94-107

D. Tsakatikas, S. Diplaris and M. Sfantsikopoulos

Volume 1, issue 4, 2007

Analysing inaccurate judgemental sales forecasts pp. 355-369

Annastiina Kerkkanen and Janne Huiskonen

A Lagrangian Relaxation approach for production planning with demand uncertainty pp. 370-390

Haoxun Chen

Bi-criteria scheduling of a flowshop manufacturing cell with sequence dependent setup times pp. 391-413

S. Hamed Hendizadeh, Tarek Y. ElMekkawy and G. Gary Wang

Operator staffing and scheduling for an IT-help call centre pp. 414-430

Hesham K. Alfares

Heuristics for the single machine scheduling problem with early and quadratic tardy penalties pp. 431-448

Jorge M.S. Valente

An analysis of the stochastic behaviour for shift conversion system pp. 449-461

K. Senthamarai Kannan and C. Vijayalakshmi

Volume 1, issue 3, 2007

Controlling bullwhip and inventory variability with the golden smoothing rule pp. 241-265

Stephen M. Disney, Ingrid Farasyn, Marc R. Lambrecht, Denis R. Towill and Wim Van De Velde

Optimal (s, S) production policies with delivery time guarantees and breakdowns pp. 266-279

Olfa Jellouli, Eric Chatelet and Patrick Lallement

Using financial incentives as a coordinating mechanism to improve the supply chain network integration pp. 280-300

Navee Chiadamrong, Kanit Prasertwattana and Shimizu Yoshiaki

Order oriented slotting: a new assignment strategy for warehouses pp. 301-316

Ronald J. Mantel, Peter C. Schuur and Sunderesh S. Heragu

Genetic algorithms for generalised hypertree decompositions pp. 317-340

Nysret Musliu and Werner Schafhauser

The operator-machine assignment problem pp. 341-353

Edward F. Stafford

Volume 1, issue 2, 2007

Analysing risk orientation in a stochastic VRP pp. 111-130

Marc Reimann

Using simulation to determine reliability and availability of telecommunication networks pp. 131-151

Javier Faulin, Angel Juan, Carles Serrat and Vicente Bargueno

Metaheuristics for solving economic lot scheduling problems (ELSP) using time-varying lot-sizes approach pp. 152-181

C. Chandrasekaran, Chandrasekharan Rajendran, O.V. Krishnaiah Chetty and Donakonda Hanumanna

Parameter setting in a bio-inspired model for dynamic flexible job shop scheduling with sequence-dependent setups pp. 182-199

Xuefeng Yu, Bala Ram and Xiaochun Jiang

An approximation method to analyse polling models of pull-type production systems pp. 200-222

Mustafa Karakul and Abdullah Dasci

Climbing depth-bounded discrepancy search for solving hybrid flow shop problems pp. 223-243

Abir Ben Hmida, Marie-Jose Huguet, Pierre Lopez and Mohamed Haouari

Volume 1, issue 1, 2007

Fixed trading costs, signal processing and stochastic portfolio networks pp. 5-21

C. Kenneth Jones

Quantification of risk mitigation environment of supply chains using graph theory and matrix methods pp. 22-39

Mohd Nishat Faisal, D.K. Banwet and Ravi Shankar

The 'effective variance' control chart for monitoring the dispersion process with missing data pp. 40-55

J. Carlos Garcia-Diaz

Influencing factors of job waiting time variance on a single machine pp. 56-73

Xueping Li, Nong Ye, Xiaoyun Xu and Rapinder Sawhey

Scalable material assignment methods for build-to-order environments pp. 74-92

Kaipei Chen, Scott A. Moses and P. Simin Pulat

A multimedia educational tool integrating materials handling technology, analysis and design using a virtual distribution center pp. 93-110

Shaelynn Hales, Sunderesh S. Heragu, Robert J. Graves, Sybillyn Jennings and Charles Malmborg