International Journal of System Assurance Engineering and Management

2016 - 2025

Current editor(s): P.K. Kapur, A.K. Verma and U. Kumar

From:
Springer
The Society for Reliability, Engineering Quality and Operations Management (SREQOM),India, and Division of Operation and Maintenance, Lulea University of Technology, Sweden
Bibliographic data for series maintained by Sonal Shukla () and Springer Nature Abstracting and Indexing ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

2019, volume 10, articles 6

Network architecture for demand response implementation in smart grid pp. 1389-1402

A. Jain, A. Mani and A. S. Siddiqui

Devising smart strategic framework for assessment of quality in engineering education pp. 1403-1428

Vivek B. Kamat and Jayant K. Kittur

Human resource management: new approach to nurse scheduling by considering human error pp. 1429-1443

Peyman Kiani Nahand, Mahdi Hamid, Mahdi Bastan and Ali Mollajan

Multi-response optimization based on desirability function and Taguchi method in agile software development pp. 1444-1452

Anusha Pai, Gopalkrishna Joshi and Suraj Rane

Identification of latent variables using, factor analysis and multiple linear regression for software fault prediction pp. 1453-1473

Deepak Sharma and Pravin Chandra

Modelling the factors influencing the service quality in supermarkets pp. 1474-1486

M. Suresh, G. Mahadevan and R. Dev Abhishek

Gap between academia and industry: a case of empirical evaluation of three software testing methods pp. 1487-1504

Sheikh Umar Farooq

The location-scale family of generalized Maxwell distributions: theory and applications to annual rainfall records pp. 1505-1515

Sudhanshu V. Singh and Vikas Kumar Sharma

Exploring trends in the evolution of open-source systems pp. 1516-1526

Raed Shatnawi

An extended observer based-controller applied to sensorless PMSM drive using the mean value theorem and Lipchitz models pp. 1527-1534

Bilal Hamidani, Abdelkrim Allag, Okba Zeghib and Abrar Allag

Posterior and predictive inferences for Marshall Olkin bivariate Weibull distribution via Markov chain Monte Carlo methods pp. 1535-1543

Rakesh Ranjan and Vastoshpati Shastri

Relative risk proneness in phases of software development: metric based approach with Cox model pp. 1544-1554

Pooja Jha and K. Sridhar Patnaik

Comparative study of back-stepping controller and super twisting sliding mode controller for indirect power control of wind generator pp. 1555-1566

Belkacem Belabbas, Tayeb Allaoui, Mohamed Tadjine and Mouloud Denai

Using an objective measurement model to determine the corrective maintenance demand in the field of hospital engineering pp. 1567-1576

Francisco J. Moral, Francisco J. Rebollo, Luis Foz and Francisco Méndez

Quality of service (QoS) parameters prediction for web services using hybrid neural network and ensemble methods pp. 1577-1614

Lov Kumar and Ashish Sureka

An integrated approach of SWARA and fuzzy COPRAS for maintenance technicians’ selection factors ranking pp. 1615-1626

Desmond Eseoghene Ighravwe and Sunday Ayoola Oke

Profit analysis of butter-oil (ghee) producing system of milk plant using supplementary variable technique pp. 1627-1638

Parveen Kumari, Mukender Singh Kadyan and Jitender Kumar

Mathematical modeling and behavioral analysis of a washing unit in paper mill pp. 1639-1645

Arun Kumar, Deepika Garg and Pardeep Goel

A mixture frailty model for maintainability analysis of mechanical components: a case study pp. 1646-1653

Rezgar Zaki, Abbas Barabadi, Ali Nouri Qarahasanlou and A. H. S. Garmabaki

Mobile robot visual navigation based on fuzzy logic and optical flow approaches pp. 1654-1667

Mohamed Nadour, Mohamed Boumehraz, Lakhmissi Cherroun and Vicenç Puig

Accelerated life testing for reliability improvement: a case study on Moulded Case Circuit Breaker (MCCB) mechanism pp. 1668-1690

Santosh B. Rane, Prathamesh R. Potdar and Suraj Rane

2019, volume 10, articles 5

Aspects of software quality applied to the process of agile software development: a systematic literature review pp. 867-897

Gloria Arcos-Medina and David Mauricio

A new Top-k query processing algorithm to guarantee confidentiality of data and user queries on outsourced databases pp. 898-904

Hyeong-Jin Kim and Jae-Woo Chang

Bayesian estimation of $$R=P[Y pp. 905-917

Abhimanyu Singh Yadav, S. K. Singh and Umesh Singh

The equal tendency algorithm: a new heuristic for the reliability model pp. 918-924

Elias Munapo

Parameter estimation of the inverted exponentiated Rayleigh distribution based on progressively first-failure censored samples pp. 925-936

Shuo Gao and Wenhao Gui

Bi-objective integer programming analysis based on the characteristic equation pp. 937-944

Masar Al-Rabeeah, Santosh Kumar, Ali Al-Hasani, Elias Munapo and Andrew Eberhard

Combined forecasting of civil aviation passenger volume based on ARIMA-REGRESSION pp. 945-952

Cheng Li

Fuzzy rule-based reliability analysis using NSGA-II pp. 953-972

Hemant Kumar and Shiv Prasad Yadav

Ranking hotels using aspect ratings based sentiment classification and interval-valued neutrosophic TOPSIS pp. 973-983

Himanshu Sharma, Abhishek Tandon, P. K. Kapur and Anu G. Aggarwal

How effective are maintainability metrics in estimating maintenance efforts? An empirical study pp. 984-1001

B. Ramachandra Reddy and Aparajita Ojha

Availability and reliability of a parallel system under imperfect repair and replacement: analysis and cost optimization pp. 1002-1009

Neama Salah Youssef Temraz

Influence of abattoir waste management practices on natural environment conservation pp. 1010-1022

Daniel Bekele Wakeyo, Ajit Pal Singh and Muralidhar Avvari

A cancelable biometric based secure session key agreement protocol employing elliptic curve cryptography pp. 1023-1042

Arpita Sarkar and Binod Singh

Integration of agile software development and robust design methodology in optimization of software defect parameters pp. 1043-1051

Anusha Pai, Gopalkrishna Joshi and Suraj Rane

On Bayesian reliability estimation of a 1-out-of-k load sharing system model of modified Burr-III distribution pp. 1052-1081

Azeem Ali, Sanku Dey, Haseeb Ur Rehman and Zeeshan Ali

Gravitational search algorithm based optimization technique for enhancing the performance of self excited induction generator pp. 1082-1090

Swati Paliwal, Sanjay Kumar Sinha and Yogesh Kumar Chauhan

On a generalized Lomax distribution pp. 1091-1104

Raj Kamal Maurya, Yogesh Mani Tripathi, Chandrakant Lodhi and Manoj Kumar Rastogi

Developing ships’ repair OI and OP in the Omani dockyard: co-association of proficiency, efficiency and concentration in the knowledge environment pp. 1105-1120

Ali M. S. Al-Raqadi

Ergonomic risk assessment of farmers in Odisha (India) pp. 1121-1132

Debesh Mishra and Suchismita Satapathy

Providing a combined model of fuzzy AHP and numerical taxonomy analysis for sport organizational ranking and performance appraisal pp. 1133-1144

Mehdi Salimi and Mahboubeh Khodaparast

Super-twisting sliding mode control for brushless doubly fed induction generator based on WECS pp. 1145-1157

Oussama Moussa, Rachid Abdessemed and Said Benaggoune

A template for quantitative risk assessment of facilities storing hazardous chemicals pp. 1158-1172

Arafat Basheer, S. M. Tauseef, Tasneem Abbasi and S. A. Abbasi

Probabilistic failure analysis of hot gas path in a heavy-duty gas turbine using Bayesian networks pp. 1173-1185

Amir Masoud Mirhosseini, S. Adib Nazari, A. Maghsoud Pour, S. Etemadi Haghighi and M. Zareh

An empirical study of non-reproducible bugs pp. 1186-1220

Anjali Goyal and Neetu Sardana

Modelling and simulation of repairable mechanical systems reliability and availability pp. 1221-1233

Girish Kumar, Vipul Jain and Umang Soni

Estimation of maintainability parameters for object-oriented software using hybrid neural network and class level metrics pp. 1234-1264

Lov Kumar, Sangeeta Lal and Lalita Bhanu Murthy

Reliability analysis method of the uncertain system based on fuzzy GO methodology and its application in electro-hydrostatic actuator pp. 1265-1275

Haipeng Wang and Fuhai Duan

Estimation for the generalized Fréchet distribution under progressive censoring scheme pp. 1276-1301

Kousik Maiti and Suchandan Kayal

Evaluation of stochastic flow networks susceptible to demand requirements between multiple sources and multiple destinations pp. 1302-1327

Esha Datta and Neeraj Kumar Goyal

Multi-attribute dependent bug severity and fix time prediction modeling pp. 1328-1352

Meera Sharma, Madhu Kumari and V. B. Singh

Efficient triads related to transportation problem with common pivotal time pp. 1353-1360

Sanchita Sharma, Rita Malhotra and Shalini Arora

A modelling applied to active renewable energy for an existing building of higher educational institution pp. 1361-1368

Tanmoy Chakraborty, Payel Ghosh, Satadal Mal and Utpal Biswas

A cost-based failure prioritization approach for selecting maintenance strategies for thermal power plants: a case study context of developing countries pp. 1369-1387

J. Wakiru, P. N. Muchiri, L. Pintelon and P. Chemweno

2019, volume 10, articles 4

Survey of combined hardware–software reliability prediction approaches from architectural and system failure viewpoint pp. 453-474

Sourav Sinha, Neeraj Kumar Goyal and Rajib Mall

Distance relay reliability enhancement using false trip root cause analysis pp. 475-483

Abdelkader Zitouni, Abderrahmane Ouadi, Hamid Bentarzi and Mahfoud Chafai

Solving matrix games with linguistic payoffs pp. 484-490

Laxminarayan Sahoo

Reliability improvement of fork biasing spring in MCCB mechanism pp. 491-498

Ajinkya Shirurkar, Yogesh Patil and D. Davidson Jebaseelan

Wind energy conversion system based on dual stator induction generator controlled by nonlinear backstepping and pi controllers pp. 499-509

Meryem Benakcha, Leila Benalia, Abdelkrim Ammar and Amor Bourek

Estimation for the parameters of the Burr Type XII distribution under doubly censored sample with application to microfluidics data pp. 510-518

Hanieh Panahi

Factor based prediction model for customer behavior analysis pp. 519-524

D. Kalaivani and P. Sumathi

The best single-observational and two-observational percentile estimations in the exponentiated Weibull-geometric distribution compared with maximum likelihood and percentile estimations pp. 525-532

Shahram Yaghoobzadeh Shahrastani and Masoud Yarmohammadi

A robust extended H∞ observer based on the mean value theorem designed for induction motor drives pp. 533-542

Okba Zeghib, Abdelkrim Allag, Meriem Allag and Bilal Hamidani

Sliding mode controller based on type-2 fuzzy logic PID for a variable speed wind turbine pp. 543-551

Zineb Lahlou, Khaddouj Ben Meziane and Ismail Boumhidi

A two-echelon integrated inventory model under generalized lead time distribution with variable backordering rate pp. 552-562

M. Ganesh Kumar and R. Uthayakumar

Modelling of the factors affecting lean implementation in healthcare using structural equation modelling pp. 563-575

Vineet Jain and Puneeta Ajmera

An integration test coverage metric for Java programs pp. 576-601

Debashis Mukherjee and Rajib Mall

The IMBES model for achieving excellence in manufacturing industry: an interpretive structural modeling approach pp. 602-622

Paranitharan Kannusamy Panneer Selvam and Ramesh Babu Thangavelu

Bootstrap confidence intervals of CpTk for two parameter logistic exponential distribution with applications pp. 623-631

Mahendra Saha, Sanku Dey and Sudhansu S. Maiti

Dynamic behavior analysis under a grid fault scenario of a 2 MW double fed induction generator-based wind turbine: comparative study of the reference frame orientation approach pp. 632-643

Ridha Cheikh, Hocine Belmili, Arezki Menacer, Said Drid and L. Chrifi-Alaoui

An assessment and analysis of musculoskeletal disorders (MSDs) of Odisha farmers in India pp. 644-660

Debesh Mishra and Suchismita Satapathy

Intuitionistic fuzzy solid assignment problems: a software-based approach pp. 661-675

P. Senthil Kumar

Quality characteristics optimization in CNC end milling of A36 K02600 using Taguchi’s approach coupled with artificial neural network and genetic algorithm pp. 676-695

Shofique U. Ahmed and Rajesh Arora

Analysis of cache behaviour and software optimizations for faster on-chip network simulations pp. 696-712

B. M. Prabhu Prasad, Khyamling Parane and Basavaraj Talawar

Laplacian whale optimization algorithm pp. 713-730

Amarjeet Singh

IoT based pollution monitoring and health correlation: a case study on smart city pp. 731-738

Debadri Dutta, Akshit Pradhan, O. P. Acharya and S. K. Mohapatra

System availability assessment using a parametric Bayesian approach: a case study of balling drums pp. 739-745

Esi Saari, Jing Lin, Liangwei Zhang and Bin Liu

Estimation and prediction using classical and Bayesian approaches for Burr III model under progressive type-I hybrid censoring pp. 746-764

Sukhdev Singh, Reza Arabi Belaghi and Mehri Noori Asl

Text analytics based severity prediction of software bugs for apache projects pp. 765-782

Arvinder Kaur and Shubhra Goyal Jindal

Attitude of mobile telecommunication subscribers towards sim card registration in Lagos State, Southwestern Nigeria pp. 783-791

O. Oyediran, A. Omoshule, Sanjay Misra, Rytis Maskeliūnas and Robertas Damaševičius

Cost reduction and quality improvement through Lean-Kaizen concept using value stream map in Indian manufacturing firms pp. 792-800

Ashwani Kumar Dhingra, Sunil Kumar and Bhim Singh

Selection of materialized views using stochastic ranking based Backtracking Search Optimization Algorithm pp. 801-810

Anjana Gosain and Kavita Sachdeva

Validating object-oriented software at design phase by achieving MC/DC pp. 811-823

Swadhin Kumar Barisal, Suvam Suvabrata Behera, Sangharatna Godboley and Durga Prasad Mohapatra

Benchmarking framework for class imbalance problem using novel sampling approach for big data pp. 824-835

Khyati Ahlawat, Anuradha Chug and Amit Prakash Singh

Fault diagnosis for gearbox based on EMD-MOMEDA pp. 836-847

Xin Zhang, Jianmin Zhao, Xianglong Ni, Fucheng Sun and Hongyu Ge

Maintenance scheduling optimization for industrial centrifugal pumps pp. 848-860

Augusto Bianchini, Marco Pellegrini and Jessica Rossi

Factors influencing online shopping behavior of university students pp. 861-865

Ashish Kumar, Monika Saini and Preeti Hans

2019, volume 10, articles 3

Spares provisioning strategy for periodically replaced units within the fleet retirement period pp. 299-315

Jan Block, Alireza Ahmadi, Xun Xiao and Uday Kumar

Test scenario prioritization for object-oriented systems using UML diagram pp. 316-325

Namita Panda, Arup Abhinna Acharya and Durga Prasad Mohapatra

Intelligent control of a brushless doubly-fed induction generator pp. 326-338

Zoheir Tir, Om P. Malik and Mohammad Naser Hashemnia

Artificial immune system based approach for size and location optimization of distributed generation in distribution system pp. 339-349

Vikas Singh Bhadoria, Nidhi Singh Pal and Vivek Shrivastava

Cubic reward penalty structure for power distribution companies pp. 350-368

Sreenithya Sumesh, Vidyasagar Potdar and Aneesh Krishna

Multi-objective reliability redundancy allocation problem considering two types of common cause failures pp. 369-383

Aniruddha Samanta and Kajla Basu

A coordinated vendor–buyer system considering loss and damage claims, insurance cost and stochastic lead time pp. 384-398

Ivan Darma Wangsa, Hui Ming Wee and Shih-Hsien Tseng

Reliability evaluation of mobile ad hoc networks by considering link expiration time and border time pp. 399-415

Gaurav Khanna, S. K. Chaturvedi and Sieteng Soh

A redundancy allocation problem by using utility function method and ant colony optimization: tradeoff between availability and total cost pp. 416-428

Ali Salmasnia, Sadegh Noori and Hadi Mokhtari

Statistical distributions comparison for remaining useful life prediction of components via ANN pp. 429-436

Mohammad Ali Farsi and S. Masood Hosseini

An adaptive underdamped stochastic resonance based on NN and CS for bearing fault diagnosis pp. 437-452

Kuo Chi, Jianshe Kang, Fei Zhao and Long Liu

2019, volume 10, articles 2

Cybersecurity for eMaintenance in railway infrastructure: risks and consequences pp. 149-159

Adithya Thaduri, Mustafa Aljumaili, Ravdeep Kour and Ramin Karim

Bi-level decision making models for advertising allocation problem under fuzzy environment pp. 160-172

Syed Mohd Muneeb, Ahmad Yusuf Adhami, Zainab Asim and Syed Aqib Jalil

Multi-objective linear fractional inventory problem under intuitionistic fuzzy environment pp. 173-189

Irfan Ali, Srikant Gupta and Aquil Ahmed

Classical and Bayes estimation of reliability characteristics of the Kumaraswamy-Inverse Exponential distribution pp. 190-200

M. K. Rastogi and P. E. Oguntunde

Analyzing the productivity of maintenance systems using system dynamics modeling method pp. 201-211

Esmaeil Esmaeili, Hasan Karimian and Mohammad Najjartabar Bisheh

AHP-Entropy based priority assessment of factors to reduce aviation fuel consumption pp. 212-227

Jagroop Singh, Somesh Kumar Sharma and Rajnish Srivastava

An algorithm for performance evaluation of resilience engineering culture based on graph theory and matrix approach pp. 228-241

Masoud Rabbani, Reza Yazdanparast and Mahdi Mobini

A study of software reliability on big data open source software pp. 242-250

Ranjan Kumar, Subhash Kumar and Sanjay K. Tiwari

Evaluating the lifetime performance index of products based on generalized order statistics from two-parameter exponential model pp. 251-275

Mohammad Vali Ahmadi, Jafar Ahmadi and Mousa Abdi

Multi-objective grey wolf optimizer approach to the reliability-cost optimization of life support system in space capsule pp. 276-284

Anuj Kumar, Sangeeta Pant, Mangey Ram and Shshank Chaube

Coordination of a three-level supply chain with variable demand and order size dependent trade credit in healthcare industries pp. 285-298

S. K. Karuppasamy and R. Uthayakumar

2019, volume 10, articles 1

Special issue: Current research in life cycle engineering and management pp. 1-2

Ljubisa Papic

A review paper to examine the validity of Bayesian network to build rational consensus in subjective probabilistic failure analysis pp. 1-18

Mohammad Yazdi

Application of probability distributions mixture of safety indicator in risk assessment problems pp. 3-11

Lidiya N. Aleksandrovskaya, Anna E. Ardalionova and Ljubisa Papic

Analysis and comparison of some criteria of checking the probability distribution deviation from the normal distribution law pp. 12-20

L. N. Aleksandrovskaya, P. A. Iosifov and A. V. Kirillin

On two node tandem queueing model with time dependent service rates pp. 19-34

K. Srinivasa Rao and J. Durga Aparajitha

Statistical bootstrap in the problem of availability factor estimating: example of SRs 1200 excavator reliability pp. 21-28

Irina Gadolina, Ljubisa Papic and Rashid Zaynetdinov

Control of consensus convergence in technical committees of standardization on the basis of regular Markov chains model pp. 29-36

Aleksandr V. Zazhigalkin, Iosif Z. Aronov, Olga V. Maksimova and Ljubisa Papic

Auto parts manufacturing quality assessment using design for six sigma (DFSS), case study in ISACO company pp. 35-43

Amir Abbas Shojaie and Elahe Kahedi

Estimation of risks related to the functioning of railway telecommunication pp. 37-44

V. A. Gapanovich, I. B. Shubinsky, I. N. Rosenberg and A. M. Zamyshlyaev

Qualitative analysis of CNG dispensing system using fuzzy FMEA–GRA integrated approach pp. 44-56

Dilbagh Panchal and Priyank Srivastava

Vulnerability assessment methodology and some methodical aspects of critical infrastructure protection pp. 45-57

Alexander V. Bochkov

Maintenance performance evaluation using an integrated approach of graph theory, ISM and matrix method pp. 57-82

V. N. Aju Kumar, Piyush Gupta and O. P. Gandhi

Modeling innovation adoption incorporating time lag between awareness and adoption process pp. 83-90

Richie Aggarwal, Ompal Singh, Adarsh Anand and P. K. Kapur

Ant colony optimization technique for edge detection using fuzzy triangular membership function pp. 91-96

Ruchika Singh, Munish Vashishath and S. Kumar

Reliability analysis of a rodding anode plant in aluminum industry with multiple units failure and single repairman pp. 97-109

Yaqoob Al Rahbi, S. M. Rizwan, B. M. Alkali, Andrew Cowell and G. Taneja

Estimating the threshold of software metrics for web applications pp. 110-125

Ruchika Malhotra and Anjali Sharma

A TISM based study of SSCM enablers: an Indian coal- fired thermal power plant perspective pp. 126-141

Jitendra Narayan Biswal, Kamalakanta Muduli, Suchismita Satapathy and Devendra K. Yadav

The strategy of traffic congestion management based on case-based reasoning pp. 142-147

Hao Zhang and GuangLong Dai