EconPapers    
Economics at your fingertips  
 

International Journal of Enterprise Network Management

2006 - 2025

From Inderscience Enterprises Ltd
Bibliographic data for series maintained by Sarah Parker ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.


Volume 5, issue 4, 2012

A survey on computation methods for Nash equilibrium pp. 317-332 Downloads
Moon K. Chetry and Dipti Deodhare
Evaluation of service quality of banks - a fuzzy approach pp. 333-354 Downloads
A. Kiruthika, S. Chandramohan, M. Punniyamoorthy and S. Latha
Globalisation effect of productivity and quality dimensions on capacity utilisation through multivariate confirmatory analysis pp. 355-380 Downloads
Annamalai Sivakumar, Kalliannan Saravanan, Palanisamy Navaneethakrishnan and Rathanasamy Raja Sekar
Applied the grounded theory and IPA to explore the success factors of after-sales service pp. 381-401 Downloads
Toong Chinn Koh, Tzong-Ru Lee and Agnieszka M. Dadura

Volume 5, issue 3, 2012

The development of e-business in the Chinese automotive industry pp. 219-238 Downloads
MeiYi Winnie Song, Kulwant S. Pawar and Peter M. Standring
Environmental practices in the Romanian banking sector: an exploratory study pp. 239-253 Downloads
Panayiotis H. Ketikidis, Cristina Bulata and Lambros Lazuras
Effectiveness of total quality management on business performance in Nigerian manufacturing firms: an empirical analysis pp. 254-271 Downloads
Olawumi Dele Awolusi
Intelligent genetic algorithms in the optimisation of a PIFA antenna using hybridised fitness characterisation and clustering pp. 272-280 Downloads
Mohammad Riyad Ameerudden and Harry Coomar Shumsher Rughooputh
Poverty alleviation of weavers through sustainable low cost technology-based solution pp. 281-303 Downloads
Sanjay Mohapatra and Nilay Raha
A fuzzy PROMETHEE II method for the selection of reverse logistics provider pp. 304-315 Downloads
Jlassi Jihen, A. El Mhamedi and H. Chabchoub

Volume 5, issue 2, 2012

Knowledge build-up high complexity environment: towards on the innovation value chain performance in the product development process under uncertainty and restraint pp. 97-125 Downloads
Selma Regina Martins Oliveira and Roberto Sbragia
Open innovation of consensus standard - cases of business model creation in ICT pp. 126-143 Downloads
Masami Kajiura
Technology to prevent mobile phone accidents pp. 144-155 Downloads
H. Abdul Shabeer, R.S.D. Wahida Banu and H. Abdul Zubar
Corporate social responsibility in face of global financial crisis: evidence from Nigeria pp. 156-175 Downloads
Benjamin A. Mmadu and Lawrence O. Osevwe
Influence of advertising led brand personality consumer congruity on consumer's choice: evidence from Indian apparel market pp. 176-196 Downloads
Bilal Mustafa Khan and Reshma Farhat
Dynamic vehicle path planning using an enhanced simulated annealing approach for supply chains pp. 197-218 Downloads
Hui Miao and Xiaodi Huang

Volume 5, issue 1, 2012

Exploring important factors affecting implementation of restaurant information system into traditional Chinese restaurant pp. 3-16 Downloads
Tsong Zen Liu and Hsuan Cheng Chou
A case study of using 7S framework to improve business process for call centre reforming pp. 17-32 Downloads
C.F. Hsu and C.H. Peng
Process architecture and process modelling in the Egyptian industry: the case of Incom pp. 33-42 Downloads
Rasha Fady and Rasha Abd El Aziz
The study on the challenges and strategies of Taiwanese enterprises in China during 2007-2008: a text mining analysis pp. 43-54 Downloads
J.J. Guo and S.H. Wu
Critical factors of strategic procurement in textile and apparel sourcing companies in Hong Kong: an empirical study pp. 55-71 Downloads
Simon S.M. Yuen
Sustainability assessment of supply chains with engineering services focus pp. 72-91 Downloads
John P.T. Mo

Volume 4, issue 4, 2011

An instrument to assess supply chain risk: establishing content validity pp. 325-343 Downloads
L. Manikandan, N. Thamaraiselvan and M. Punniyamoorthy
Economic emission dispatch of thermal generating units using genetic algorithm technique pp. 344-353 Downloads
H. Vennila, B.G. Malini, V. Evangelin Jeba and T. Ruban Deva Prakash
A model for vendor managed inventory by applying the economic order quantity with fuzzy demand pp. 354-366 Downloads
Rika Ampuh Hadiguna, Harlina Suzana Jaafar and Sabariah Mohamad
Multistage tumour growth through stochastic model with continuous time pp. 367-379 Downloads
P. Tirupathi Rao, T. Ganesh and P.R.S. Reddy
Towards collaborative smart supply chains – capabilities for business development pp. 380-399 Downloads
Katri Valkokari, Minna Kansola and Tiina Valjakka
Cold chain logistics in the floral industry pp. 400-413 Downloads
Adeola Olubukola Babalola, Balan Sundarakani and K. Ganesh

Volume 4, issue 3, 2011

Ontology-driven knowledge management for cognitive networks pp. 229-246 Downloads
Dimitris N. Kanellopoulos
Antecedents of work related musculoskeletal disorders in software professionals pp. 247-260 Downloads
S. Paul Silvian, Arun Maiya, A.T. Resmi and Tom Page
Measuring determinants of employee satisfaction in an eye hospital: study in India pp. 261-274 Downloads
Preethi John, V.R. Muraleedharan, T.J. Kamalanabhan and R.D. Thulasiraj
Identifying types of stores in commercial zones and their marketing strategies pp. 275-301 Downloads
Naiyarat Singhavolakul, Tzong-Ru Lee and Nirote Sinnarong
Performance of improved dynamic source routing algorithm for military communication logistics pp. 302-310 Downloads
A. Valarmathi and R.M. Chandrasekaran
Heuristic for a single period single product closed loop supply chain pp. 311-324 Downloads
Neelesh Rangwani, P. Subramanian, N. Ramkumar and T.T. Narendran

Volume 4, issue 2, 2010

Impact of volume, routing and product mix flexibilities on the performance of a job shop: a simulation study pp. 107-135 Downloads
B. Shoban Babu and G. Srinivasan
Measurement of surface roughness through RSM: effect of coated carbide tool on 6061-t4 aluminium pp. 136-153 Downloads
Mukesh Kumar Barua, Jyoti Sagar Rao, S.P. Anbuudayasankar and Tom Page
Modelling and optimisation of submerged arc welding process parameters using particle swarm optimisation technique pp. 154-165 Downloads
J. Edwin Raja Dhas and Somasundaram Kumanan
Simulation-based decision-making scenarios in dynamic supply chain pp. 166-182 Downloads
Anjali Saxena, Yves Ducq, R.A. Malairajan and P. Sivakumar
Investigation of thermal stress development by layer manufacturing on fused deposition modelling parts pp. 183-200 Downloads
M. Saravanan
Customer relationship-based strategic planning using balanced scorecard – a case study pp. 201-228 Downloads
S. Nagarajan, A. Sam Nallathambi, P.L.K. Palaniappan and Balan Sundarakani

Volume 4, issue 1, 2010

RFID based vehicle toll collection system for toll roads pp. 3-15 Downloads
K. Shobana, A. Naveen Sait and A. Noorul Haq
A model for the study of user adoption behaviours of mobile commerce pp. 16-25 Downloads
Donny C.F. Lai, Ivan K.W. Lai and Ernest Jordan
A heuristic to generate input sequence for simulated annealing to solve VRP pp. 26-38 Downloads
R. Dhanalakshmi, P. Parthiban and Anirban Ghatak
Business model for virtual manufacturing: a human-centred and eco-friendly approach pp. 39-58 Downloads
Sekhar Chattopadhyay, John P.T. Mo and Danny S.K. Chan
Development of electronic marketplace for collaborative supply chain: a conceptual framework pp. 59-67 Downloads
Simon S.M. Yuen
A multi-criteria decision making methodology for the selection of reverse logistics operating modes pp. 68-79 Downloads
P. Sasikumar and A. Noorul Haq
A decision-making framework for service quality measurements in hospitals pp. 80-91 Downloads
A. Mohamed Riyazh Khan, P.N. Prasad and Sw. Rajamanoharane
The trend of RFID application to the supply chain management (2009-2010): a text mining analysis pp. 92-102 Downloads
S.H. Wu and Y.D. Shi

Volume 3, issue 4, 2009

An empirical analysis of ERP implementation in a developing country: toward a generic framework pp. 309-331 Downloads
Mohamed Gamal Aboelmaged
Information communication technology adoption by small-to-medium-sized food enterprises in Australia pp. 332-346 Downloads
Suku Bhaskaran and Emilija Gligorovska
RFID security risks in supply chains: more than privacy pp. 347-357 Downloads
Simon D. Rihs
Prioritising purchasing development in small and medium sized enterprises pp. 358-373 Downloads
Seung-Kuk Paik, Thomas Wedel and Chi-Chuan Yao
An integrated model for a class of sourcing problem using multiple regression analysis and analytical hierarchy process pp. 374-394 Downloads
P. Mathiyalagan, M. Punniyamoorthy and P. Parthiban

Volume 3, issue 3, 2009

Ergonomic risk incorporated schedules (ERIS) – scheduling using genetic algorithm to reduce operator fatigue in flow-shop based cells pp. 184-200 Downloads
T. Aravindkrishna, V. Balasubramanian and T.T. Narendran
Saving based algorithm for multi-depot version of vehicle routing problem with simultaneous pickup and delivery pp. 201-222 Downloads
Y. Gajpal and P.L. Abad
A multi-criteria decision making model for outsourcing inbound logistics of an automotive industry using the AHP and TOPSIS pp. 223-245 Downloads
N. Ramkumar, P. Subramanian and M. Rajmohan
Partially centralised decisions and information synchronisation in supply chain pp. 246-267 Downloads
Anjali Saxena, K. Ganesh, Avneet Saxena and Tom Page
An analytic model for selection of and allocation among third party logistics service providers pp. 268-288 Downloads
R. Rajesh, S. Pugazhendhi and K. Ganesh
A framework for business transformation through enterprise-wide, automated, profit-maximised planning pp. 289-308 Downloads
S. Santhanakrishnan, Siddhartha SenGupta and T.T. Narendran

Volume 3, issue 2, 2009

Is excellence an elusive dream for East African business schools? pp. 93-111 Downloads
Simmy M. Marwa, Kay Hooi Keoy and S.C. Lenny Koh
A hybrid decision model for the selection of capital equipment using AHP in conjoint analysis under fuzziness pp. 112-129 Downloads
P. Parthiban, M. Punniyamoorthy, P. Mathiyalagan and P.D.D. Dominic
Multi-objective mathematical model for order quantity allocation in multiple discount environments for healthcare supply chain pp. 130-156 Downloads
P. Sivakumar, K. Ganesh and S.C. Lenny Koh
The factor-model which influences university teachers' tacit knowledge transfer and the positive study pp. 157-164 Downloads
Qin Fen Shi, Jie Wu and Yong-xiang Sheng
Modelling of single sourcing, multiperiod, multivendor, multibuyer based VMI pp. 165-180 Downloads
R. Dhanalakshmi, P. Parthiban, T. Arunkumar and P.D.D. Dominic

Volume 3, issue 1, 2009

The value of setup cost reduction and quality improvement on the optimal production run length and inspection schedules in a deteriorating production process pp. 1-22 Downloads
Mallika Parveen and T.V.V.L.N. Rao
The effect of online game design on players' satisfactions pp. 23-42 Downloads
Dauw-Song Zhu, Bruce Chien-Ta Ho, Cheng-Tsung Lu and Sheng-ling Xu
A conceptual view on the scope and scale of growth of third party logistics provider services in India pp. 43-55 Downloads
G. Kannan, V.P. Vinay and S.C. Lenny Koh
Business process engineering: case studies pp. 56-72 Downloads
Ivan K.W. Lai, Ka Wing Lee and Walter W.C. Chung
Improvement of service quality of recreational fish market: case study of Yong-An fish market in Taiwan pp. 73-92 Downloads
Tzong-Ru Lee, Hsiao-Chen Wu, Shuchih Ernest Chang and Ching-Yu Huang
Page updated 2025-06-03