Journal of Risk and Reliability

2006 - 2025

Bibliographic data for series maintained by SAGE Publications ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 225, issue 4, 2011

Probabilistic analysis of shear fatigue life of steel plate girders using a fracture mechanics approach pp. 389-398

M B Anoop, G Prabhu and K Balaji Rao

Path-based calculation of MTTFF, MTTFR, and asymptotic unavailability with the stochastic process algebra tool CASPA†pp. 399-406

J Schuster and M Siegle

Choosing a consumption strategy for a population of units based on reliability pp. 407-423

L Lu, C M Anderson-Cook and A G Wilson

Energy control in dependable wireless sensor networks: a modelling perspective pp. 424-434

D Bruneo, A Puliafito and M Scarpa

A probabilistic approach for design and certification of self-healing advanced composite structures pp. 435-449

H R Williams, R S Trask and I P Bond

Uncertainty analysis of common cause failure in safety instrumented systems pp. 450-460

W Mechri, C Simon and K Ben Othman

Unobserved, re-defined, unknown or removed failure modes in competing risks pp. 461-474

T Coolen-Maturi and F P A Coolen

Volume 225, issue 3, 2011

Technology impacts on safety and decision making over time in marine transportation pp. 269-292

H Dhami and M Grabowski

Reliability analysis of screwed connections in high-speed trains, considering fatigue, corrosion, and imperfect maintenance operations pp. 293-306

A Chateauneuf, F Cocheteux, F Deffarges and F Sourget

Marine traffic risk modelling – an innovative approach and a case study pp. 307-322

J Montewka, P Krata, F Goerlandt, A Mazaheri and P Kujala

Quantitative risk assessment through hybrid causal logic approach pp. 323-332

Wang Y-F, M Xie, M S Habibullah and Ng K-M

Collision avoidance systems in air and maritime traffic pp. 333-343

M Baldauf, K Benedict, S Fischer, F Motz and J-U Schrö der-Hinrichs

On safety analysis of complex technical maritime transportation systems pp. 345-354

K Kolowrocki and J Soszynska

New approach to the modelling of motor failure data with application to the engine overhaul decision process pp. 355-363

R Jiang

Application of multi-objective genetic algorithms to two case studies of reliability efficiency analysis and optimal expansion of electrical transmission networks pp. 365-374

F Cadini, E Zio, L R Golea and C A Petrescu

Risk-based inspections enhanced with Bayesian networks pp. 375-386

F De Carlo, O Borgia and M Tucci

Volume 225, issue 2, 2011

Guest Editorial pp. 103-104

Christophe Bérenguer, Anne Barros and J A M van der Weide

Maintenance policy on a finite time span for a gradually deteriorating system with imperfect improvements pp. 105-116

A Ponchet, M Fouladirad and A Grall

Effective age models for imperfect maintenance pp. 117-130

Labeau P-E and Segovia M-C

Selecting test sensitivity and specificity parameters to optimally maintain a degrading system pp. 131-139

L M Maillart, T G Yeung and Z Gozde Icten

Modelling multicomponent systems to quantify reliability centred maintenance strategies pp. 141-160

V Zille, C Bérenguer, A Grall and A Despujols

Optimal periodic condition inspection and replacement policy for a binary monotone system using a counting process approach pp. 161-168

R Flage and T Aven

Modelling the effects of maintenance on the degradation of a water-feeding turbo-pump of a nuclear power plant pp. 169-183

P Baraldi, M Compare, A Despujols and E Zio

Overview of a semi-stochastic filtering approach for residual life estimation with applications in condition based maintenance pp. 185-197

W Wang

Piecewise deterministic Markov processes and maintenance modeling: application to maintenance of a train air-conditioning system pp. 199-209

W Lair, S Mercier, M Roussignol and R Ziani

Burn-in and imperfect preventive maintenance strategies for warranted products pp. 211-218

M Shafiee, M Finkelstein and S Chukova

Remaining useful life, technical health, and life extension pp. 219-231

P Vaidya and M Rausand

On the use of uniformization to estimate transition probabilities in categorical condition data pp. 233-239

Kallen M-J

Finite-time maintenance cost analysis of engineering systems affected by stochastic degradation pp. 241-250

M D Pandey, T Cheng and J A M van der Weide

Modelling warranty extensions: a case study in the automotive industry pp. 251-265

P A Scarf and H A Majid

Volume 225, issue 1, 2011

Design and time parameters identification for non-Markovian Petri net models: application to reliability analysis pp. 1-18

D Lefebvre

Combining different binary decision diagram techniques for solving models with multiple failure states pp. 18-27

M Pock, O Malass'e and M Walter

Stochastic hybrid automata model for dynamic reliability assessment pp. 28-41

G A Pérez Castañeda, Aubry J-F and N Brinzei

Risk-based software release policy under parameter uncertainty pp. 42-49

M Xie, X Li and S H Ng

Importance and uncertainty analysis in software reliability assessment of computer relay pp. 50-61

D K Mohanta and D S Roy

Genetic algorithm-aided reliability analysis pp. 62-80

N Harnpornchai

Lithium-ion battery life prognostic health management system using particle filtering framework pp. 81-90

M Dalal, J Ma and D He

Improving system reliability using conditional reliability importance pp. 91-99

S Roychowdhury and D Bhattacharya

Volume 224, issue 4, 2010

Guest Editorial pp. i-vi

N/a

Extreme-value-model-based risk assessment for nuclear reactors pp. 239-252

C J Scarrott and A MacDonald

Handling parameter and model uncertainties by continuous gates in fault tree analyses pp. 253-265

F Brissaud, A Barros and C Bérenguer

Transferable belief model for reliability analysis of systems with data uncertainties and failure dependencies pp. 266-278

M Sallak, W Schön and F Aguirre

Forecasting seismic damage scenarios of residential buildings from rough inventories: A case-study in the Abruzzo Region (Italy) pp. 279-296

A Bernardini, S Lagomarsino, A Mannella, A Martinelli, L Milano and S Parodi

Efficiency of tuned mass dampers with uncertain parameters on the performance of structures under stochastic excitation pp. 297-308

B Schmelzer, M Oberguggenberger and C Adam

Bayes linear kinematics in the analysis of failure rates and failure time distributions pp. 309-321

K J Wilson and M Farrow

Evaluation of elicitation methods to quantify Bayes linear models pp. 322-332

M Revie, T Bedford and L Walls

Bayesian linear inspection planning for large-scale physical systems pp. 333-345

D Randell, M Goldstein, G Hardman and P Jonathan

Reliability assessment of explosive material based on penalty tests: An info-gap approach pp. 346-355

T Mirer and Y Ben-Haim

Author Index 2010 pp. 356-357

N/a

Volume 224, issue 3, 2010

New decision support system based on operational risk assessment to improve aircraft operability pp. 137-147

A Arnaiz, S Ferreiro and M Buderath

System state estimation by particle filtering for fault diagnosis and prognosis pp. 149-158

F Cadini, D Avram and E Zio

Direct unavailability computation of a maintained highly reliable system pp. 159-170

R Briš and P Byczanski

Defence of homogeneous parallel multi-state systems subject to two sequential attacks pp. 171-183

Kjell Hausken and G Levitin

Human reliability: Benchmark and prediction pp. 185-196

R B Duffey and T Ha

Some testimators for the scale parameter and reliability function of Weibull lifetime data pp. 197-205

Z A Al-Hemyari

Automated fault tree construction for a sample chemical plant pp. 207-216

A Majdara and T Wakabayashi

Approach to assess the occurrence probability of a long-term evolution scenario of a long-lived nuclear waste repository pp. 217-224

H Chraibi and S Pierlot

Review of recent advances in reliability of consecutive k-out-of-n and related systems pp. 225-237

S Eryilmaz

Volume 224, issue 2, 2010

Using life curves as input to quantitative risk analysis in electricity distribution system asset management pp. 63-74

D E Nordgärd, T M Welte and J Heggset

New insight into the average probability of failure on demand and the probability of dangerous failure per hour of safety instrumented systems pp. 75-86

F Innal, Y Dutuit, A Rauzy and Signoret J-P

Implementation of multi-objective optimization for vulnerability analysis of complex networks pp. 87-95

C M Rocco, J E Ramirez-Marquez, D E Salazar and I Hernandez

Integrated framework for safety management and uncertainty management pp. 97-103

E B Abrahamsen, T Aven and R S Iversen

Generic approach for deriving reliability and maintenance requirements through consideration of in-context customer objectives pp. 105-112

J A Jones and L Warrington

Probabilistic risk assessment framework for software propagation analysis of failures pp. 113-135

Y Wei, M Rodriguez and C S Smidts

Volume 224, issue 1, 2010

Wind power modelling and the determination of capacity credit in an electric power system pp. 1-9

R Billinton and D Huang

Nonparametric predictive inference for competing risks pp. 11-26

T A Maturi, P Coolen-Schrijner and F P A Coolen

Multistate stochastic network interdiction via reliability modelling and evolutionary optimization pp. 27-42

A Carrigy, J E Ramirez-Marquez and C M Rocco

Reliability analysis of static and dynamic fault-tolerant systems subject to probabilistic common-cause failures pp. 43-53

L Xing, P Boddu, Y Sun and W Wang

Extended opportunity-based age replacement with a one-cycle criterion pp. 55-62

D Venkat, F P A Coolen and P Coolen-Schrijner