Journal of Risk and Reliability

2006 - 2025

Bibliographic data for series maintained by SAGE Publications ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 230, issue 6, 2016

Multi-state reliability assessment for hydraulic lifting system based on the theory of dynamic Bayesian networks pp. 533-544

Chun Su, Ning Lin and Yequn Fu

Consecutive k-out-of-n lines with a change point pp. 545-550

Serkan Eryilmaz

Data transmission reliability evaluation of a stochastic computer network through minimal paths with a retransmission mechanism pp. 551-560

Yi-Kuei Lin and Chih-Li Pan

Reliability analysis of hybrid multi-carrier energy systems based on entropy-based Markov model pp. 561-569

Xilin Zhao, Fei Liu, Bo Fu and Na Fang

Multidisciplinary reliability design optimization using an enhanced saddlepoint approximation in the framework of sequential optimization and reliability analysis pp. 570-578

Rong Yuan, Debiao Meng and Haiqing Li

Change point–based software reliability model under imperfect debugging with revised concept of fault dependency pp. 579-597

Subhashis Chatterjee and Ankur Shukla

Thermodynamics as a fundamental science of reliability pp. 598-608

Anahita Imanian and Mohammad Modarres

Volume 230, issue 5, 2016

Editorial: Special Issue ESREL 2014 pp. 443-444

Tomasz Nowakowski and Enrico Zio

Bayesian Evidence Synthesis and the quantification of uncertainty in a Monte Carlo simulation pp. 445-456

Ullrika Sahlin and Yf Jiang

A testing-based approach to ensure the safety of shared resource concurrent systems pp. 457-472

Lars-Åke Fredlund, Julio Mariño, Raúl NN Alborodo and à ngel Herranz

Multi-branch hidden Markov models for remaining useful life estimation of systems under multiple deterioration modes pp. 473-484

Thanh Trung Le, Florent Chatelain and Christophe Bérenguer

A model-driven approach to survivability requirement assessment for critical systems pp. 485-501

Simona Bernardi, Lacramioara Dranca and José Merseguer

Improving scheduled maintenance by missing data reconstruction: A double-loop Monte Carlo approach pp. 502-511

Michele Compare, Francesco Di Maio, Enrico Zio, Fausto Carlevaro and Sara Mattafirri

Some perspectives on risk management: A security case study from the oil and gas industry pp. 512-520

Torbjørn Bjerga and Terje Aven

A risk-oriented degradation model for maintenance of reinforced concrete structure subjected to cracking pp. 521-530

Boutros El Hajj, Bruno Castanier, Franck Schoefs and Thomas Yeung

Volume 230, issue 4, 2016

Editorial: New Editor-in-Chief pp. 353-353

Terje Aven

Higher moments and probability distribution of maintenance cost in the delay time model pp. 354-363

Mahesh D Pandey, Tianjin Cheng and Jam Van der Weide

Performance measures for a deteriorating system subject to imperfect maintenance and delayed repairs pp. 364-377

Inma T Castro and Sophie Mercier

Design of a fuzzy model that integrates hygiene, safety, and environment systems for the assessment of the overall risk of machines pp. 378-390

Ahmed Bounit, Elhassan Irhirane, Nawal Bourquia and Rachid Benmoussa

Preventive maintenance for a single-machine system under variable operational conditions pp. 391-404

Jiawen Hu, Zuhua Jiang and Hong Wang

Stochastic modelling and prediction of fatigue crack propagation using piecewise-deterministic Markov processes pp. 405-416

Anis Ben Abdessalem, Romain Azaïs, Marie Touzet-Cortina, Anne Gégout-Petit and Monique Puiggali

How companies and governments react to disasters pp. 417-426

Kjell Hausken and Jun Zhuang

System identification and multi-fault isolation for a hydraulic drive with pump loading pp. 427-440

Sanjoy K Ghoshal, Sarnendu Paul, Subrata Samanta and Jay P Tripathi

Volume 230, issue 3, 2016

Comparisons of offshore wind turbine reliability pp. 251-264

Tatiana M Delorm, Yizhou Lu, Aristos Christou and Patrick McCluskey

Global reliability sensitivity analysis of motion mechanisms pp. 265-277

Pengfei Wei, Jingwen Song and Zhenzhou Lu

A failure rate interaction model for two-component systems based on copula function pp. 278-284

Wei Peng, Xiaoling Zhang and Hong-Zhong Huang

The impact of redundancy on resilience engineering in a petrochemical plant by data envelopment analysis pp. 285-296

Ali Azadeh, Mansoureh Hasannia Kolaee and Vahid Salehi

Reliability estimation considering usage rate profile and warranty claims pp. 297-308

Shah Limon, Om Prakash Yadav, Ming J Zuo, Jason Muscha and Russell Honeyman

Reliability updating in linear opinion pooling for multiple decision makers pp. 309-322

Donnacha Bolger and Brett Houlding

Safety assessment for inland waterway transportation with an extended fuzzy TOPSIS pp. 323-333

Kezhong Liu, Jinfen Zhang, Xinping Yan, Yiliu Liu, Di Zhang and Weidong Hu

Some reliability indexes and sojourn time distributions for a repairable degradation model pp. 334-349

Shijia Du, Lirong Cui and Cong Lin

Volume 230, issue 2, 2016

A copula-based reliability modeling for nonrepairable multi-state k-out-of-n systems with dependent components pp. 133-146

Xiang-Yu Li, Yu Liu, Chu-Jie Chen and Tao Jiang

Analysis of minimal cut and path sets based on direct partial Boolean derivatives pp. 147-161

Miroslav Kvassay, Vitaly Levashenko and Elena Zaitseva

Selective maintenance scheduling over a finite planning horizon pp. 162-177

Mayank Pandey, Ming J Zuo and Ramin Moghaddass

Fault diagnosis for the complex manufacturing system pp. 178-194

Dang Trinh Nguyen, Quoc Bao Duong, Eric Zamai and Muhammad Kashif Shahzad

Probability of collapse of a bridge system under seismic and scour hazards pp. 195-203

Xuan Guo and Ya Guo

An adaptive support vector regression method for structural system reliability assessment and its application to a cable-stayed bridge pp. 204-219

Yang Liu, Naiwei Lu, Xinfeng Yin and Mohammad Noori

On preventive maintenance of systems subject to shocks pp. 220-227

Maxim Finkelstein and Ilya Gertsbakh

Planning, tracking and projecting method for testability growth based on in time correction pp. 228-236

Chenxu Zhao, Jing Qiu, Guanjun Liu and Kehong Lv

Modeling flexible two-dimensional warranty contracts for used products considering reliability improvement actions pp. 237-247

Chun Su and Xiaolin Wang

Volume 230, issue 1, 2016

Editorial pp. 3-3

Tadashi Dohi, Suk Joo Bae and Richard Arnold

Failure distributions in multicomponent systems with imperfect repairs pp. 4-17

Richard Arnold, Stefanka Chukova and Yu Hayakawa

Bayesian inference of multi-stage reliability for degradation systems with calibrations pp. 18-33

Dejing Kong and Lirong Cui

Optimal control limit policy for age-dependent deteriorating systems under incomplete observations pp. 34-43

Lu Jin, Undarmaa Bayarsaikhan and Kazuyuki Suzuki

Optimal planning for open source software updates pp. 44-53

Chao Luo, Hiroyuki Okamura and Tadashi Dohi

Kernel-based nonparametric estimation methods for a periodic replacement problem with minimal repair pp. 54-66

Yasuhiro Saito, Tadashi Dohi and Won Y Yun

A study of MTTF in two-unit standby redundant system with priority under limited information about failure and repair times pp. 67-74

Y Takemoto and I Arizono

Optimal element loading for linear sliding window systems pp. 75-84

Hui Xiao, Rui Peng, Wenbin Wang and Fei Zhao

Planning simple step-stress accelerated life tests using reference optimality criterion pp. 85-92

Ancha Xu, Yincai Tang, Qiang Guan and Xinze Lian

A preventive replacement policy based on system critical condition pp. 93-100

Won Young Yun and Alfonsus Julanto Endharta

Comparisons of standby and parallel systems in reliability, replacement, scheduling and application pp. 101-108

Xufeng Zhao, Mingchih Chen and Toshio Nakagawa

Sensory information fusion–based fault diagnostics for complex electronic systems pp. 109-119

Lei Xu and Jiuping Xu

Health-and-usage-based maintenance policies for a partially observable deteriorating system pp. 120-129

Estelle Deloux, Mitra Fouladirad and Christophe Bérenguer