Journal of Risk and Reliability

2006 - 2025

Bibliographic data for series maintained by SAGE Publications ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 227, issue 6, 2013

Maximum group sizes for simultaneous testing in high potential risk scenarios pp. 569-575

Frank PA Coolen

Network vulnerability assessment via bi-objective optimization with a fragmentation approach as proxy pp. 576-585

César Yajure, Darihelen Montilla, Jose Emmanuel Ramirez-Marquez and Claudio M Rocco S

Reliability-based topology optimization design of a linear piezoelectric micromotor using an optimum finite element method pp. 586-598

Mohsen Sadeghbeigi Olyaie, Mohammad Reza Razfar and Semyung Wang

Modeling systems with mobile components: a comparison between AltaRica and PEPA nets pp. 599-613

Leila Kloul, Tatiana Prosvirnova and Antoine Rauzy

Quantification and compensation of the impact of faults in system throughput pp. 614-628

Ricardo J Rodríguez, Jorge Júlvez and José Merseguer

Prediction of failure rates for new subsea systems: a practical approach and an illustrative example pp. 629-640

Maryam Rahimi and Marvin Rausand

Estimation of conditional moment by moving least squares and its application for importance analysis pp. 641-650

Wenbin Ruan, Zhenzhou Lu and Pengfei Wei

The importance measure on the non-probabilistic reliability index of uncertain structures pp. 651-661

Guijie Li, Zhenzhou Lu, Longfei Tian and Jia Xu

On designing step-stress partially accelerated life tests under failure-censoring scheme pp. 662-670

Ali A Ismail

Volume 227, issue 5, 2013

An introduction to statistical flowgraph models for engineering systems pp. 461-470

David H Collins, Richard L Warr and Aparna V Huzurbazar

An alternative comprehensive framework using belief functions for parameter and model uncertainty analysis in nuclear probabilistic risk assessment applications pp. 471-490

Tu Duong Le Duy, Laurence Dieulle, Dominique Vasseur, Christophe Bérenguer and Mathieu Couplet

Non-probabilistic reliability sensitivity analysis of the model of structural systems with interval variables whose state of dependence is determined by constraints pp. 491-498

Ning-Cong Xiao, Hong-Zhong Huang, Yan-Feng Li, Zhonglai Wang and Xiao-Ling Zhang

Bivariate distribution models using copulas for reliability analysis pp. 499-512

Xiao-Song Tang, Dian-Qing Li, Chuang-Bing Zhou and Li-Min Zhang

Nonparametric predictive inference for system failure time based on bounds for the signature pp. 513-522

Abdullah H Al-nefaiee and Frank PA Coolen

Affine arithmetic for assessing the uncertainty propagation on steady-state probabilities of Markov models owing to uncertainties in transition rates pp. 523-533

Claudio M Rocco S

Advancement in living probabilistic safety assessment to increase safety of nuclear power plants pp. 534-539

Muhammad Zubair and Gyunyoung Heo

Binary decision diagram-based reliability evaluation of k-out-of-(n + k) warm standby systems subject to fault-level coverage pp. 540-548

Qingqing Zhai, Rui Peng, Liudong Xing and Jun Yang

Safety and reliability analysis methods based on systemic-structural activity theory pp. 549-556

Gregory Z Bedny and Steven R Harris

An enhanced decision diagram-based method for common-cause failure analysis pp. 557-566

Yuchang Mo and Liudong Xing

Volume 227, issue 4, 2013

Special section on railway risk and reliability pp. 359-359

Darren Prescott

Compliance versus risk assessment: when have we done enough? pp. 360-367

Howard J Parkinson

Application of evidential networks in quantitative analysis of railway accidents pp. 368-384

Felipe Aguirre, Mohamed Sallak, Walter Schön and Fabien Belmonte

Probabilistic fatigue life analysis of welded steel plate railway bridge girders using S–N curve approach pp. 385-404

K Balaji Rao, Anoop Mb, G Raghava, M Prakash and A Rajadurai

Assessment of national reference values for railway safety: a statistical treatment pp. 405-410

Jens Braband and Hendrik Schäbe

A Bayesian network to evaluate underground rails maintenance strategies in an automation context pp. 411-424

Laurent Bouillaut, Olivier Francois and Stéphane Dubois

An efficient method for the estimation of parameters of stochastic gamma process from noisy degradation measurements pp. 425-433

Dongliang Lu, Mahesh D Pandey and Wei-Chau Xie

Computation of remaining useful life on a physic-based model and impact of a prognosis on the maintenance process pp. 434-449

Ariane Lorton, Mitra Fouladirad and Antoine Grall

Reliability analysis of a geographic information system-aided optimal phasor measurement unit location for smart grid operation pp. 450-458

Debomita Ghosh, T. Ghose and D.K. Mohanta

Volume 227, issue 3, 2013

Special issue of selected articles from PSAM 11– ESREL 2012 pp. 225-226

Terje Aven

The interplay between deployment and optimal maintenance intervals for complex multi-component systems pp. 227-240

Tiedo Tinga and Rene Janssen

On risk reduction principles in the context of maintenance optimisation modelling pp. 241-250

Roger Flage

A track ballast maintenance and inspection model for a rail network pp. 251-266

Darren Prescott and John Andrews

Uncertainty analysis in degradation modeling for maintenance policy assessment pp. 267-278

Piero Baraldi, Michele Compare and Enrico Zio

Semi-Markov processes with semi-regenerative states for the availability analysis of chemical process plants with storage units pp. 279-289

Olga Fink and Enrico Zio

Semi-Markov models for performance evaluation of failure-prone IP multimedia subsystem core networks pp. 290-301

Maurizio Guida, Maurizio Longo, Fabio Postiglione, Kishor S Trivedi and Xiaoyan Yin

Implementing dynamic flowgraph methodology models with logic programs pp. 302-314

Ilkka Karanta

Fault tree linking versus event tree linking approaches: a reasoned comparison pp. 315-326

Olivier Nusbaumer and Antoine Rauzy

A Bayesian approach to sensor placement optimization and system reliability monitoring pp. 327-347

Masoud Pourali and Ali Mosleh

Foundational issues in relation to national risk assessment methodologies pp. 348-358

Henning Veland, Øystein Amundrud and Terje Aven

Volume 227, issue 2, 2013

Modeling multivariate distributions using Monte Carlo simulation for structural reliability analysis with complex performance function pp. 109-118

Dian-Qing Li, Shui-Hua Jiang, Shuai-Bing Wu, Chuang-Bing Zhou and Li-Min Zhang

Technique for optimal placement of transducers for fault detection in rotating machines pp. 119-131

Shahab Fatima, Sabyasachi G Dastidar, Amiya Ranjan Mohanty and Vallayil Narayana Achutha Naikan

Optimum multi-objective modified constant-stress accelerated life test plan for the Burr type-XII distribution with type-I censoring pp. 132-143

Preeti W Srivastava and Neha Mittal

Effects of remedial actions on small piping reliability pp. 144-161

Abdelmoumene Guedri

Reliability demonstration based on accelerated degradation testing for unknown model parameters pp. 162-172

Wei Luo, Chun-Hua Zhang, Xun Chen and Yuan-Yuan Tan

On profust reliability of coherent systems: signature-based expressions pp. 173-178

Serkan Eryilmaz and Babak Daneshvar Rouyendegh

Reliability modeling and analysis for open source cloud computing pp. 179-186

Yoshinobu Tamura, Masaru Kawakami and Shigeru Yamada

Reliability evaluation and optimization of series–parallel systems with k-out-of-n: G subsystems and mixed redundancy types pp. 187-198

Prashanthi Boddu and Liudong Xing

Estimating bearing lower bound reliability without past failures pp. 199-206

Reuben Lim Chi Keong and David Mba

A study of human reaction during the initial stages of a dwelling fire using a Bayesian network model pp. 207-221

Dante B Matellini, Alan D Wall, Ian D Jenkinson, Jin Wang and Robert W Pritchard

Corrigendum pp. 222-222

N/a

Volume 227, issue 1, 2013

A modified variance-based importance measure and its solution by state dependent parameter pp. 3-15

Wenbin Ruan, Zhenzhou Lu and Longfei Tian

A new algorithm for variance-based importance measures and importance kernel sensitivity pp. 16-27

Changcong Zhou, Zhenzhou Lu and Guijie Li

A probabilistic approach for estimating defect size and density considering detection uncertainties and measurement errors pp. 28-40

Kaushik Chatterjee and Mohammad Modarres

Integrated treatment of model and parameter uncertainties through a Bayesian approach pp. 41-54

Enrique López Droguett and Ali Mosleh

Log-linear process modeling for repairable systems with time trends and its applications in reliability assessment of numerically controlled machine tools pp. 55-65

Zhi-Ming Wang and Xia Yu

Use of accident precursor event investigations in the understanding of major hazard risk potential in the Norwegian offshore industry pp. 66-79

Jan-Erik Vinnem

Assessing reliability within error rate and time constraint for a stochastic node-imperfect computer network pp. 80-85

Yi-Kuei Lin and Cheng-Fu Huang

Accident modeling and risk assessment framework for safety critical decision-making: application to deepwater drilling operation pp. 86-105

Samith Rathnayaka, Faisal Khan and Paul Amayotte