Journal of Risk and Reliability

2006 - 2025

Bibliographic data for series maintained by SAGE Publications ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 229, issue 6, 2015

Bi-criteria maintenance policies for a system subject to competing wear and δ-shock failures pp. 485-500

W Zhu, M Fouladirad and C Bérenguer

A framework for Industrial Product–Service Systems risk management pp. 501-516

Maokuan Zheng, Xinguo Ming, Miao Li and Lina He

A stochastic simulation algorithm for evaluation of seismic pounding response of adjacent structures pp. 517-529

Sepideh Rahimi and Masoud Soltani

Dynamic fault tree analysis based on continuous-time Bayesian networks under fuzzy numbers pp. 530-541

Yan-Feng Li, Jinhua Mi, Yu Liu, Yuan-Jian Yang and Hong-Zhong Huang

Optimization of reliability for a hierarchical facility location problem under disaster relief situations by a chance-constrained programming and robust optimization pp. 542-555

Vahidreza Ghezavati, Faezeh Soltanzadeh and Ashkan Hafezalkotob

A delay-time-based inspection model for parallel systems pp. 556-567

Xuejuan Liu, Wenbin Wang, Rui Peng and Fei Zhao

A new decomposition algorithm for complex voting gates processing in qualitative fault tree analysis pp. 568-575

Jin Wang, Shanqi Chen, Fang Wang and Liqin Hu

Reliability analysis of complex dynamic fault trees based on an adapted K.D. Heidtmann algorithm pp. 576-586

Daochuan Ge, Meng Lin, Yanhua Yang, Ruoxing Zhang and Qiang Chou

Risk assessment of fuel quantity indicator replacement in ATR 72 aircraft pp. 587-603

Rosario M Ardito Marretta and John A Drew Bedson

A new remote intelligent diagnosis system for marine diesel engines based on an improved multi-kernel algorithm pp. 604-611

Yupeng Yuan, Xinping Yan, Kai Wang and Chengqing Yuan

System availability enhancement using computational intelligence–based decision tree predictive model pp. 612-626

Qadeer Ahmed, Fatai A Anifowose and Faisal Khan

Developing seismic vulnerability curves for typical Iranian buildings pp. 627-640

Mehdi Sadeghi, Mohsen Ghafory-Ashtiany and Naghmeh Pakdel-Lahiji

Volume 229, issue 5, 2015

Guest Editorial pp. 359-359

Matthew Revie

Capacity value of offshore wind in Great Britain pp. 360-372

Gareth P Harrison, Samuel L Hawkins, Dan Eager and Lucy C Cradden

A proactive group maintenance policy for continuously monitored deteriorating systems: Application to offshore wind turbines pp. 373-384

Mahmood Shafiee and Maxim Finkelstein

Modelling and simulation of the operation and maintenance of offshore wind turbines pp. 385-393

Fernando Santos, Ângelo P Teixeira and C Guedes Soares

The impact of maintenance contract arrangements on the yield of offshore wind power plants pp. 394-402

Graeme S Hawker and David A McMillan

Component reliability test approaches for marine renewable energy pp. 403-416

Philipp R Thies, Lars Johanning, Kwaku Ampea Karikari-Boateng, Chong Ng and Paul McKeever

Operation and maintenance strategies for wave energy converters pp. 417-441

Simon Ambühl, Laurent Marquis, Jens Peter Kofoed and John Dalsgaard Sørensen

An efficient Kriging method for global sensitivity of structural reliability analysis with non-probabilistic convex model pp. 442-455

Yishang Zhang, Yongshou Liu, Xufeng Yang and Bin Zhao

A new fuzzy model for determining risk level on the workplaces in manufacturing small and medium enterprises pp. 456-468

Marko J Djapan, Danijela P Tadic, Ivan D Macuzic and Predrag Dj Dragojovic

New method for multi-state system reliability analysis based on linear algebraic representation pp. 469-482

Chenxi Liu, Nan Chen and Jianing Yang

Volume 229, issue 4, 2015

Guest Editorial pp. 277-278

Piero Baraldi and Enrico Zio

Lifecycle Prognostics: Transitioning between information types pp. 279-290

Michael Sharp, Jamie Coble, Alan Nam, J Wes Hines and Belle Upadhyaya

Study of on-line condition monitoring and fault feature extraction for marine diesel engines based on tribological information pp. 291-300

Xinping Yan, Chenxing Sheng, Jiangbin Zhao, Kun Yang and Zhixiong Li

Frequency domain reflectometry for remaining useful life estimation of instrumentation and control cables pp. 301-309

Brent D Shumaker, Dan E McCarter, Hashem M Hashemian and Ryan D O’Hagan

Effect of air temperature on passive containment cooling system reliability in AP1000 pp. 310-318

Yu Yu, Nan Ma, Shengfei Wang and Fenglei Niu

Variable selection and uncertainty analysis of scale growth rate under pre-salt oil wells conditions using support vector regression pp. 319-326

Enrique L Droguett, Isis D Lins, Márcio C Moura, Enrico Zio and Carlos M Jacinto

Implementation of a condition monitoring system on an electric arc furnace through a risk-based methodology pp. 327-342

Cristian Colace, Luca Fumagalli, Simone Pala, Marco Macchi, Nelson R Matarazzo and Maurizio Rondi

Degradation modeling–based remaining useful life estimation: A review on approaches for systems with heterogeneity pp. 343-355

Zhengxin Zhang, Xiaosheng Si, Changhua Hu and Xiangyu Kong

Volume 229, issue 3, 2015

Quantifying intra-organisational risks: An analysis of practice-theory tensions in probability elicitation to improve technical risk management in an energy utility pp. 171-180

Gillian Anderson, Lesley Walls, Matthew Revie, Euan Fenelon and Calum Storie

Application of receiver operating characteristic curve for pipeline reliability analysis pp. 181-192

Kong Fah Tee, Lutfor Rahman Khan and Tahani Coolen-Maturi

SkSP-V sampling plan for accelerated life tests pp. 193-199

Muhammad Aslam, Chi-Hyuck Jun and Ashifa Arshad

Remaining useful life estimation under degradation and shock damage pp. 200-208

Hai-Kun Wang, Yan-Feng Li, Yu Liu, Yuan-Jian Yang and Hong-Zhong Huang

A misalignment detection methodology by measuring rate of temperature rise of shaft coupling using thermal imaging pp. 209-219

Shahab Fatima, Amiya R Mohanty and Achutha Naikan Vn

Estimation of reliability of structures subject to fatigue loading using plastic strain energy and thermodynamic entropy generation pp. 220-236

Victor Luis Ontiveros, Mohammad Modarres and Mehdi Amiri

Global sensitivity analysis for model with random inputs characterized by probability-box pp. 237-253

Jingwen Song, Zhenzhou Lu, Pengfei Wei and Yanping Wang

Combining reliability attributes to maintenance policies to improve high-voltage oil circuit breaker performances in the case of competing risks pp. 254-265

Fairouz Iberraken, Rafik Medjoudj, Rabah Medjoudj and Djamil Aissani

Integrating human factors training into safety management and risk management: A case study from aviation maintenance pp. 266-274

Samuel Cromie, Derek Ross, Siobhan Corrigan, Paul Liston, Darragh Lynch and Evangelos Demosthenous

Volume 229, issue 2, 2015

A reliability assessment method based on an accelerated testing under thermal cycling environment pp. 97-104

Zongyue Yu, Zhiqian Ren, Junyong Tao and Xun Chen

Bearing fault diagnosis based on a new acoustic emission sensor technique pp. 105-118

Brandon Van Hecke, Yongzhi Qu and David He

Maximum likelihood analysis of multi-stress accelerated life test data of series systems with competing log-normal causes of failure pp. 119-130

Soumya Roy and Chiranjit Mukhopadhyay

Reliability and maintenance models for a dependent competing-risk system with multiple time-scales pp. 131-142

Rassoul Noorossana and Kamyar Sabri-Laghaie

Statistical analysis of accelerated degradation testing for old products with initial working time pp. 143-150

Yuanyuan Tan, Chunhua Zhang, Xun Chen and Yashun Wang

A multi-constrained maintenance scheduling optimization model for a hydrocarbon processing facility pp. 151-168

Qadeer Ahmed, Kamran S Moghaddam, Syed A Raza and Faisal I Khan

Volume 229, issue 1, 2015

Data mining–based intelligent fault diagnostics for integrated system health management to avionics pp. 3-15

Jiuping Xu, Kai Sun and Lei Xu

An inverse problem of the load-sharing system reliability analysis: Constructing the load function pp. 16-25

Sergey V Gurov and Lev V Utkin

A production scheduling problem considering random failure and imperfect preventive maintenance pp. 26-35

Xiaohui Chen, Lei Xiao and Xinghui Zhang

Contribution to system failure occurrence prediction and to system remaining useful life estimation based on oil field data pp. 36-45

David Vališ, Libor Žák and Ondřej Pokora

A simulation-based approach to determine the evaluation adequacy of system-of-systems operational test configurations pp. 46-51

Robert N Tamburello and Jeffrey W Herrmann

Storage battery remaining useful life prognosis using improved unscented particle filter pp. 52-61

Limin Li, Zhongsheng Wang and Hongkai Jiang

Achieved availability importance measure for enhancing reliability-centered maintenance decisions pp. 62-72

Mary A Gravette and Kash Barker

Probabilistic model–based multi-integration formulas for quantifying a generalized minimal cut sequence pp. 73-82

Daochuan Ge, Ruoxing Zhang, Qiang Chou and Yanhua Yang

Optimal design of constant stress accelerated degradation test plan with multiple stresses and multiple degradation measures pp. 83-93

Yashun Wang, Chunhua Zhang, Shufeng Zhang, Xun Chen and Yuanyuan Tan