Journal of Risk and Reliability

2006 - 2025

Bibliographic data for series maintained by SAGE Publications ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 228, issue 6, 2014

An improved ensemble empirical mode decomposition method and its application to pressure pulsation analysis of hydroelectric generator unit pp. 543-557

Xiaoming Xue, Jianzhong Zhou, Yongchuan Zhang, Weibo Zhang and Wenlong Zhu

Bearing fault diagnosis of wind turbine based on intrinsic time-scale decomposition frequency spectrum pp. 558-566

Xueli An and Dongxiang Jiang

A graph theory approach for reliability analysis of phasor measurement units using frequency and duration technique pp. 567-577

Debomita Ghosh, Anvesha Mishra, T Ghose and Dusmanta Kumar Mohanta

Two modified estimators of reliability function with exponential failure model based on prior information and time-censored data pp. 578-589

Al-Hemyari Za and Al-Dolami Ja

A competing risk model for dependent and imperfect condition–based preventive and corrective maintenances pp. 590-605

Márcio das Chagas Moura, Enrique López Droguett, Paulo Renato Alves Firmino and Ricardo José Ferreira

Reliability of warm-standby systems subject to imperfect fault coverage pp. 606-620

Ola Tannous, Liudong Xing, Rui Peng and Min Xie

Reliability analysis of direct drive electrohydraulic servo valves based on a wear degradation process and individual differences pp. 621-630

Yuan-Jian Yang, Weiwen Peng, Debiao Meng, Shun-Peng Zhu and Hong-Zhong Huang

Feature generation method for fault diagnosis of closed cable loop used in deployable space structures pp. 631-640

Zehao Pan, Jianing Wu, Shaoze Yan and Yongxia Gu

A reliability model of blade to avoid resonance considering multiple fuzziness pp. 641-652

Meng Zhang and Shan Lu

Volume 228, issue 5, 2014

Nonparametric predictive inference for system reliability using the survival signature pp. 437-448

Frank PA Coolen, Tahani Coolen-Maturi and Abdullah H Al-nefaiee

Reliability optimization through robust redundancy allocation models with choice of component type under fuzziness pp. 449-459

Roya Soltani and Seyed J Sadjadi

Assessment of fracture reliability analysis of crack growth in spring clip type Vossloh SKL14 pp. 460-468

Saeed Mohammadzadeh, Sodayf Ahadi and Hassan Keshavarzian

Fatigue reliability evaluation of structural components under random loadings pp. 469-477

Hongwei Cheng, Junyong Tao, Xun Chen and Yu Jiang

Mis-specification analysis of linear Wiener process–based degradation models for the remaining useful life estimation pp. 478-487

Shengjin Tang, Xiaosong Guo and Zhijie Zhou

Approaching dynamic reliability with predictive and diagnostic purposes by exploiting dynamic Bayesian networks pp. 488-503

Daniele Codetta-Raiteri and Luigi Portinale

Assessment of seismic collapse uncertainties of steel moment-resisting frames by means of single-degree-of-freedom systems pp. 504-517

Shayan Torabian and Touraj Taghikhany

Optimizing upgrade level and preventive maintenance policy for second-hand products sold with warranty pp. 518-528

Chun Su and Xiaolin Wang

Saddlepoint approximation-based reliability analysis method for structural systems with parameter uncertainties pp. 529-540

Ning-Cong Xiao, Yan-Feng Li, Le Yu, Zhonglai Wang and Hong-Zhong Huang

Volume 228, issue 4, 2014

Effects of component placement on solder joint through-life reliability pp. 327-336

Ryan SH Yang, Derek R Braden, Guang-Ming Zhang and David M Harvey

Developing prevention reliability in hub location models pp. 337-346

Mohammadreza Hamidi, Mohammadreza Gholamian and Kamran Shahanaghi

Modeling and analysis of failure propagation of mechanical system with multi-operation states using high-level Petri net pp. 347-361

Jianing Wu, Shaoze Yan and Gao Rx

Reliability analysis of underground pipelines with correlations between failure modes and random variables pp. 362-370

Kong Fah Tee and Lutfor Rahman Khan

A new fault tree analysis approach based on imprecise reliability model pp. 371-381

Zheng Liu, Yan-Feng Li, Li-Ping He, Yuan-Jian Yang and Hong-Zhong Huang

Fault diagnosis and prognosis with partially observed stochastic Petri nets pp. 382-396

Dimitri Lefebvre

Automated generation of mission reliability simulation model for space tracking, telemetry and control system by extensible markup language and extended object-oriented Petri net pp. 397-408

Xiao-song Yang, Xiao-yue Wu and Xin-yang Wu

Discrimination of low- and high-demand modes of safety-instrumented systems based on probability of failure on demand adaptability pp. 409-418

Yiliu Liu

Combined bispectrum and trispectrum for faults diagnosis in rotating machines pp. 419-428

Akilu Yunusa-Kaltungo and Jyoti K Sinha

Life probability distribution model of mechanical components with the number of load application as life parameter pp. 429-434

Zheng Wang and A-na Wang

Volume 228, issue 3, 2014

Guest Editorial for the special section of QUALITA pp. 217-217

Abdessamad Kobi, Zohra Cherfi and Christophe Simon

Reliability and availability analysis of the structural observability of bilinear systems: A graph-theoretical approach pp. 218-229

Manal Dakil, Christophe Simon and Taha Boukhobza

Hidden Markov model framework for industrial maintenance activities pp. 230-242

Bernard Roblès, Manuel Avila, Florent Duculty, Pascal Vrignat, Stephane Bégot and Frédéric Kratz

Stochastic activity networks for performance evaluation of fault-tolerant systems pp. 243-253

Samia Maza

Robust cold standby redundancy allocation for nonrepairable series–parallel systems through Min-Max regret formulation and Benders’ decomposition method pp. 254-264

Roya Soltani, Seyed J Sadjadi and Reza Tavakkoli-Moghaddam

Modeling and analysis of weighted-k-out-of-n: G system consisting of two different types of components pp. 265-271

Serkan Eryilmaz and Kadir Sarikaya

Defining complexity for risk assessment of sociotechnical systems: A conceptual framework pp. 272-290

Inger Lise Johansen and Marvin Rausand

Identification of vibration–speed curve for hydroelectric generator unit using statistical fuzzy vector chain code and support vector machine pp. 291-300

Han Xiao, Jianzhong Zhou, Jian Xiao, Wenlong Fu, Xin Xia and Weibo Zhang

Collapse fragility curve development using Monte Carlo simulation and artificial neural network pp. 301-312

Ehsan Khojastehfar, Seyed Bahram Beheshti-Aval, Mohammad Reza Zolfaghari and Kourosh Nasrollahzade

Importance factors of coherent systems: A review pp. 313-323

Yves Dutuit and Antoine Rauzy

Volume 228, issue 2, 2014

Estimation and inference in sets of Weibull samples pp. 115-126

John I McCool

Accelerated degradation tests for reliability estimation of a new product: A case study for washing machines pp. 127-138

Filippo De Carlo, Orlando Borgia and Mario Tucci

Comparing topological and reliability-based vulnerability analysis of Iran power transmission network pp. 139-151

Zohre Alipour, Mohammad Ali Saniee Monfared and Enrico Zio

Single minimal path based backup path for multi-state network pp. 152-165

Yun Zhang, Zhengguo Xu, Xinli Wang, Jiangang Lu and Youxian Sun

Bayesian nonparametric models for combining heterogeneous reliability data pp. 166-175

Richard L Warr and David H Collins

An accident data–based approach for congestion risk assessment of inland waterways: A Yangtze River case pp. 176-188

Di Zhang, Xinping Yan, Zaili Yang and Jin Wang

Testability demonstration test planning based on sequential posterior odds test method pp. 189-199

Chao Wang, Jing Qiu, Guan-jun Liu and Yong Zhang

Integrated importance of multi-state fault tree based on multi-state multi-valued decision diagram pp. 200-208

Shumin Li, Shubin Si, Liudong Xing and Shudong Sun

Accountability, Risk, and the ALARP (As Low As Reasonably Practicable) limit of benefit pp. 209-214

Niels Lind

Volume 228, issue 1, 2014

Bayes linear variance structure learning for inspection of large scale physical systems pp. 3-18

David Randell, Michael Goldstein and Philip Jonathan

Expert elicitation of a navigation service implementation effects on ship groundings and collisions in the Gulf of Finland pp. 19-28

Maria Hänninen, Arsham Mazaheri, Pentti Kujala, Jakub Montewka, Pekka Laaksonen, Maija Salmiovirta and Mikko Klang

A methodology for the investigation of the reliability and safety of unique technical systems pp. 29-38

Aleksandr F Berman, Olga A Nikolaychuk, Aleksandr Y Yurin and Aleksandr I Pavlov

An approach to system reliability prediction for mechanical equipment using fuzzy reasoning Petri net pp. 39-51

Jianing Wu and Shaoze Yan

Availability-based optimal maintenance policies for repairable systems in military aviation by identification of dominant failure modes pp. 52-61

Rajiv N Rai and Nomesh Bolia

On the profust reliabilities of consecutive k-out-of-n systems pp. 62-71

Sevcan Demir Atalay, Ali Mert and Ozge E Gultekin

A probability estimation method for reliability analysis using mapped Gegenbauer polynomials pp. 72-82

Xianzhen Huang and Yimin Zhang

New insights into breadth-first search edge ordering of regular networks for terminal-pair reliability analysis pp. 83-92

Zhusheng Pan, Yuchang Mo, Liudong Xing and Jianmin Han

Resolving equipment failure causes by root cause analysis and theory of inventive problem solving pp. 93-111

Pablo Viveros, Enrico Zio, Christopher Nikulin, Raúl Stegmaier and Gloria Bravo