Journal of Risk and Reliability

2006 - 2025

Bibliographic data for series maintained by SAGE Publications ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 232, issue 6, 2018

Basis for non-propagation domains, their transformations and their impact on software reliability pp. 535-558

Chetan Mutha and Carol Smidts

Production performance analysis during operation phase: A case study pp. 559-575

Ali N Qarahasanlou, Abbas Barabadi and Yonas Z Ayele

An availability-based warranty policy considering preventive maintenance and learning effects pp. 576-586

Chun Su and Longfei Cheng

Online remaining useful life prognostics using an integrated particle filter pp. 587-597

Yawei Hu, Shujie Liu, Huitian Lu and Hongchao Zhang

Fatigue life prediction of wind turbine rotor blade composites considering the combined effects of stress amplitude and mean stress pp. 598-606

Jianxiong Gao, Zongwen An and Haixia Kou

Optimal mission abort policy with multiple shock number thresholds pp. 607-615

Gregory Levitin and Maxim Finkelstein

Community detection and resilience in multi-source, multi-terminal networks pp. 616-626

Claudio M Rocco, Kash Barker, Jose Moronta and Jose E Ramirez-Marquez

Reliability sensitivity analysis of coherent systems based on survival signature pp. 627-634

Xianzhen Huang and Frank PA Coolen

Lifetime estimation of nitrile butadiene rubber O-rings under storage conditions using time-varying copula pp. 635-646

Jun Pan, Guanghan Bai and Wenhua Chen

Reliability of nonrepairable phased-mission systems with common bus performance sharing pp. 647-660

Huan Yu, Jun Yang and Yu Zhao

Multi-objective optimization for safety and reliability trade-off: Optimization and results processing pp. 661-676

Cristina Johansson, Johan Ölvander and Micael Derelöv

A Markov decision process framework for optimal operation of monitored multi-state systems pp. 677-689

Michele Compare, Paolo Marelli, Piero Baraldi and Enrico Zio

Predictive airframe maintenance strategies using model-based prognostics pp. 690-709

Yiwei Wang, Christian Gogu, Nicolas Binaud, Christian Bes, Raphael T Haftka and Nam-Ho Kim

Decision-making of investment in navigation safety improving schemes with application of cumulative prospect theory pp. 710-724

Lei Wang, Qing Liu and Tongle Yin

Simulation-based uncertainty correlation modeling in reliability analysis pp. 725-737

Faramarz Khosravi, Malte Müller, Michael Glaß and Jürgen Teich

A recursive Bayesian approach to small fatigue crack propagation and detection modeling pp. 738-753

Reuel Smith, Mohammad Modarres and Enrique López Droguett

Reliability modeling for systems degrading in K cyclical regimes based on gamma processes pp. 754-765

Jingyuan Shen, Alaa Elwany and Lirong Cui

An optimal inspection and replacement policy for a two-unit system pp. 766-776

Li Yang, Yu Zhao, Xiaobing Ma and Qingan Qiu

Optimal control of production with improvement pp. 777-785

Nobuyuki Tamura

Volume 232, issue 5, 2018

Special Issue Editorial pp. 475-475

N/a

Towards real-time human participation in virtual evacuation through a validated simulation tool pp. 476-490

Gabriele Montecchiari, Gabriele Bulian and Paolo Gallina

Impact of cyber dependencies in critical infrastructures: The reliability of grid splitting in power systems pp. 491-504

Di-An Tian and Giovanni Sansavini

Generic Bayesian network models for making maintenance decisions from available data and expert knowledge pp. 505-523

Haoyuan Zhang and D William R Marsh

On modeling insights for emerging engineering problems: A case study on the impact of climate uncertainty on the operational performance of offshore wind farms pp. 524-532

Iain Dinwoodie, David McMillan, Iraklis Lazakis, Yalcin Dalgic and Matthew Revie

Volume 232, issue 4, 2018

Editorial: August Special Issue on Advanced Maintenance Engineering, Services, and Technology (AMEST) pp. 337-339

Christos Emmanouilidis, Benoit Iung, Marco Macchi and Francois Peres

Object-oriented Bayesian network for complex system risk assessment pp. 340-351

Quan Liu, Ayeley Tchangani, François Pérès and Vicente Gonzalez-Prida

After-sales services optimisation through dynamic opportunistic maintenance: a wind energy case study pp. 352-367

Asier Erguido, Adolfo Crespo, Eduardo Castellano and Jose Luis Flores

A framework to embed Asset Management in production companies pp. 368-378

Irene Roda and Marco Macchi

Energy efficiency for condition-based maintenance decision-making: Application to a manufacturing platform pp. 379-388

Phuc Do, Anh Hoang, Benoit Iung and Hai-Canh Vu

A social network of collaborating industrial assets pp. 389-400

Hao Li, Adrià Salvador Palau and Ajith Kumar Parlikad

An artificial immune intelligent maintenance system for distributed industrial environments pp. 401-414

Luca Fasanotti, Sergio Cavalieri, Emanuele Dovere, Paolo Gaiardelli and Carlos E Pereira

Proton exchange membrane fuel cell remaining useful life prognostics considering degradation recovery phenomena pp. 415-424

Dacheng Zhang, Catherine Cadet, Nadia Yousfi-Steiner and Christophe Bérenguer

Wear rate–state interactions within a multi-component system: a study of a gearbox-accelerated life testing platform pp. 425-434

Roy Assaf, Phuc Do, Samia Nefti-Meziani and Philip Scarf

Excitation-invariant pre-processing of thermographic data pp. 435-446

Serafeim Moustakidis, Athanasios Anagnostis, Apostolos Chondronasios, Patrik Karlsson and Kostas Hrissagis

Condition-based selective maintenance for stochastically degrading multi-component systems under periodic inspection and imperfect maintenance pp. 447-463

Abdelhakim Khatab, Claver Diallo, El-Houssaine Aghezzaf and Uday Venkatadri

Criticality analysis for preventive maintenance optimization purposes in gas network infrastructures pp. 464-472

Javier Serra Parajes, Adolfo Crespo Márquez and Antonio Sola Rosique

Volume 232, issue 3, 2018

A methodology for model-based verification of safety contracts and performance requirements pp. 227-247

Elena Gómez-Martínez, Ricardo J Rodríguez, Clara Benac-Earle, Leire Etxeberria and Miren Illarramendi

Cost-oriented component redundancy allocation for a communication system subject to correlated failures and a transmission reliability threshold pp. 248-261

Cheng-Ta Yeh, Lance Fiondella and Ping-Chen Chang

A zero-failure accelerated degradation test under ramp–soak–stress loading pp. 262-273

Preeti Wanti Srivastava and Manisha

Warranty analysis of a two-component system with type I stochastic dependence pp. 274-283

Nan Zhang, Mitra Fouladirad and Anne Barros

Two-dimensional warranty: A literature review pp. 284-307

Xiaolin Wang and Wei Xie

The negative log-gamma prior distribution for Bayesian assessment of system reliability pp. 308-319

Roger Zoh, Alyson Wilson, Scott Vander Wiel and Earl Lawrence

Formal reliability analysis of oil and gas pipelines pp. 320-334

Waqar Ahmad, Osman Hasan, Sofiène Tahar and Mohamed Salah Hamdi

Volume 232, issue 2, 2018

Adequacy and security analysis of interdependent electric and gas networks pp. 121-139

Andrea Antenucci and Giovanni Sansavini

A clustering approach for mining reliability big data for asset management pp. 140-150

Francesco Cannarile, Michele Compare, Francesco Di Maio and Enrico Zio

The case for IT transformation and big data for safety risk management on the GB railways pp. 151-163

Coen van Gulijk, Peter Hughes, Miguel Figueres-Esteban, Rawia El-Rashidy and George Bearfield

A project management issue of new technology developments: A case study on lack of human factors’ attention in human–robot interaction pp. 164-173

Knut R Fossum, Brit-Eli Danielsen, Wenche Aarseth and Stig Ole Johnsen

Realistic modelling of flexibility and dependence in production systems in Industry 4.0 for analysing their productivity and availability pp. 174-184

Fei Long, Peter Zeiler and Bernd Bertsche

Ensembles of climate change models for risk assessment of nuclear power plants pp. 185-200

Matteo Vagnoli, Francesco Di Maio and Enrico Zio

Graphs models and algorithms for reliability assessment of coherent and non-coherent systems pp. 201-215

Nicolae Brînzei and Jean-François Aubry

Modeling an electric power microgrid by model predictive control for analyzing its characteristics from reliability, controllability and topological perspectives pp. 216-224

Fangyuan Han and Enrico Zio

Volume 232, issue 1, 2018

Developing the foundations of a cognition-based human reliability analysis model via mapping task types and performance-influencing factors: Application to radiotherapy pp. 3-37

Dhruv Pandya, Luca Podofillini, Frank Emert, Antony J Lomax and Vinh N Dang

K-mixed strategy: A new redundancy strategy for reliability problems pp. 38-51

Abdossaber Peiravi, Mahdi Karbasian and Mostafa Abouei Ardakan

Hybrid reliability-based multidisciplinary design optimization with random and interval variables pp. 52-64

Fan Yang, Zhufeng Yue, Lei Li and Dong Guan

Sensor placement determination in system health monitoring process based on dual information risk and uncertainty criteria pp. 65-81

Farzin Salehpour-Oskouei and Mohammad Pourgol-Mohammad

Optimal mission duration for systems subject to shocks and internal failures pp. 82-91

Maxim Finkelstein and Gregory Levitin

Integration of scheduled structural health monitoring with airline maintenance program based on risk analysis pp. 92-104

Jianzhong Sun, Dan Chen, Chaoyi Li and Hongsheng Yan

Methods for displaying and calibration of Cox proportional hazards models pp. 105-115

Chrianna I Bharat, Kevin Murray, Edward Cripps and Melinda R Hodkiewicz

Reviewer List 2017 pp. 116-117

N/a