Journal of Risk and Reliability

2006 - 2025

Bibliographic data for series maintained by SAGE Publications ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 233, issue 6, 2019

A weighted K-means clustering approach to solve the redundancy allocation problem of systems having components with different failures pp. 925-942

Behzad Karimi, Seyed Taghi Akhavan Niaki, Seyyed Masih Miriha, Mahsa Ghare Hasanluo and Shima Javanmard

Structural reliability and reliability sensitivity analysis of extremely rare failure events by combining sampling and surrogate model methods pp. 943-957

Pengfei Wei, Chenghu Tang and Yuting Yang

A neuro-particle swarm optimization logistic model fitting algorithm for software reliability analysis pp. 958-971

Pooja Rani and Mahapatra Gs

Reliability analysis of weighted- k -out-of- n system consisting of three-state components pp. 972-977

Serkan Eryilmaz and Ali Riza Bozbulut

An optimal preventive maintenance strategy for the hydraulic system of platform firefighting vehicle based on the improved NSGA-II algorithm pp. 978-989

Rumin Teng, Jifei Liang, Guanglei Wu, Dianlong Wang and Xin Wang

An adaptive particle swarm optimization method for multi-objective system reliability optimization pp. 990-1001

Mohamed Arezki Mellal and Enrico Zio

Dynamic reliability analysis for structure with temporal and spatial multi-parameter pp. 1002-1013

Yan Shi and Zhenzhou Lu

A rolling horizon approach for production planning and condition-based maintenance under uncertain demand pp. 1014-1028

Lin Wang, Zhiqiang Lu and Yifei Ren

k-barrier coverage reliability evaluation for wireless sensor networks using two-dimensional k-within-consecutive-r × s-out-of-m × n:F system pp. 1029-1039

Qiang Liu

Multi-mission selective maintenance modelling for multistate systems over a finite time horizon pp. 1040-1059

Xiaosheng Zhang, Jianqiao Chen, Ben Han and Junxiang Li

Reliability analysis of high-speed railway network pp. 1060-1073

Shuang Gu and Keping Li

Time-dependent reliability analysis of wind turbines considering load-sharing using fault tree analysis and Markov chains pp. 1074-1085

Yao Li and Frank PA Coolen

Inverse Gaussian–based model with measurement errors for degradation analysis pp. 1086-1098

Xudan Chen, Guoxun Ji, Xinli Sun and Zhen Li

An adaptive cuckoo optimization algorithm for system design optimization under failure dependencies pp. 1099-1105

Mohamed Arezki Mellal and Enrico Zio

Dynamic reliability evaluation of vehicle–track coupled systems considering the randomness of suspension and wheel–rail parameters pp. 1106-1121

Yahui Zhang, Wei Wang and Huajiang Ouyang

Volume 233, issue 5, 2019

Gear pitting fault diagnosis using disentangled features from unsupervised deep learning pp. 719-730

Yongzhi Qu, Yue Zhang, Miao He, David He, Chen Jiao and Zude Zhou

A stochastic process for modeling failures of a system having a non-monotonic hazard rate function pp. 731-746

Lucianne Varn, Stefanka Chukova and Richard Arnold

Reliability modeling for a discrete time multi-state system with random and dependent transition probabilities pp. 747-760

Linmin Hu and Rui Peng

Analyzing uncertainties in model response using the point estimate method: Applications from railway asset management pp. 761-774

Thorsten Neumann, Beate Dutschk and René Schenkendorf

A penalty-guided fractal search algorithm for reliability–redundancy allocation problems with cold-standby strategy pp. 775-790

Mohammad N Juybari, Mostafa Abouei Ardakan and Hamed Davari-Ardakani

Optimal allocation of test times for reliability growth testing with interval-valued model parameters pp. 791-802

Wei Wang, Yaofeng Xu and Liguo Hou

Probabilistic model of degradation of cable insulations in nuclear power plants pp. 803-814

Yuan-Shang Chang and Ali Mosleh

Optimization design of aeronautical hydraulic pipeline system based on non-probabilistic sensitivity analysis pp. 815-825

Zheng Zhang, Changcong Zhou, Wenxuan Wang and Zhufeng Yue

Correlated reliability and an application: Propulsive landing on Mars pp. 826-846

Hüseyin Sarper

Test based safety-critical software reliability estimation using Bayesian method and flow network structure pp. 847-856

Yaguang Yang

Optimal design of an electrical connector intermittent fault–accelerated reproduction test based on a genetic algorithm pp. 857-867

Zunqing Zhu, Qian Li, Yong Zhang, Guanjun Liu, Jing Qiu and Kehong Lyu

Complementary ensemble local means decomposition method and its application to rolling element bearings fault diagnosis pp. 868-880

Yao Cheng and Dong Zou

Multiobjective optimization of reliability–redundancy allocation problems for serial parallel-series systems based on importance measure pp. 881-897

Jiangbin Zhao, Shubin Si, Zhiqiang Cai, Ming Su and Wei Wang

Reliability and maintenance modeling for competing failures with intermission considered pp. 898-907

Jingyi Liu, Yugang Zhang and Bifeng Song

Methods for fault diagnosis of high-speed railways: A review pp. 908-922

Yu Zang, Wei Shangguan, Baigen Cai, Huashen Wang and Michael G Pecht

Volume 233, issue 4, 2019

Extending the survival signature paradigm to complex systems with non-repairable dependent failures pp. 505-519

Hindolo George-Williams, Geng Feng, Frank PA Coolen, Michael Beer and Edoardo Patelli

Combining system-theoretic process analysis and availability assessment: A subsea case study pp. 520-536

Juntao Zhang, Hyungju Kim, Yiliu Liu and Mary Ann Lundteigen

Sensor selection for fault diagnostics using performance metric pp. 537-552

J Reeves, R Remenyte-Prescott and J Andrews

Preventive maintenance optimization for repairable products considering two-dimensional warranty and customer satisfaction pp. 553-566

Yukun Wang, Yiliu Liu and Aibo Zhang

An importance order analysis method for causes of railway signaling system hazards based on complex networks pp. 567-579

Jintao Liu, Keping Li, Wei Zheng and Jiebei Zhu

Reliability of demand-based warm standby system with common bus performance sharing pp. 580-592

Heping Jia, Rui Peng, Yi Ding and Yonghua Song

Reliability-based covariate analysis for complex systems in heterogeneous environment: Case study of mining equipment pp. 593-604

Amin Moniri-Morad, Mohammad Pourgol-Mohammad, Hamid Aghababaei and Javad Sattarvand

Sample selection of prognostics validation test based on multi-stage Wiener process pp. 605-614

Zhiao Zhao, Yong Zhang, Guanjun Liu and Jing Qiu

Bayesian information fusion for degradation analysis of deteriorating products with individual heterogeneity pp. 615-622

Junyu Guo, Hong-Zhong Huang, Weiwen Peng and Jie Zhou

Joint optimization of components redundancy, spares inventory and repairmen allocation for a standby series system pp. 623-638

Xian Zhao, Jing Zhang and Xiaoyue Wang

Reliability of cable insulation under reaction- and diffusion-controlled thermal degradation pp. 639-647

Yuan-Shang Chang and Ali Mosleh

Two-dimensional preventive maintenance optimum for equipment sold with availability-based warranty pp. 648-657

Chun Su and Longfei Cheng

Redundancy allocation problem in a bridge system with dependent subsystems pp. 658-669

Kamyar Sabri-Laghaie, Milad Eshkevari, Mahdi Fathi and Enrico Zio

A bivariate replacement policy for an imperfect repair system based on geometric processes pp. 670-681

Qinglai Dong, Lirong Cui and Hongda Gao

Sustainable production process: An application of reliability, availability, and maintainability methodologies in automotive manufacturing pp. 682-697

Hamzeh Soltanali, Garmabaki A.H.s, Adithya Thaduri, Aditya Parida, Uday Kumar and Abbas Rohani

Warranty cost analysis with an alternating geometric process pp. 698-715

Richard Arnold, Stefanka Chukova, Yu Hayakawa and Sarah Marshall

Volume 233, issue 3, 2019

Wind turbine planetary gearbox feature extraction and fault diagnosis using a deep-learning-based approach pp. 303-316

Miao He, David He, Jae Yoon, Thomas J Nostrand, Junda Zhu and Eric Bechhoefer

Research on intermittent failure re-presentation of electrical connector based on accelerated test pp. 317-327

Qian Li, Kehong Lyu, Jing Qiu and Guanjun Liu

A linear m-consecutive-k-out-of-n system with sparse d of non-homogeneous Markov-dependent components pp. 328-337

Xiaoyan Zhu, Mahmoud Boushaba, Abdelmoumene Boulahia and Xian Zhao

A vine copula–based method for analyzing the moment-independent importance measure of the multivariate output pp. 338-354

Yicheng Zhou, Zhenzhou Lu, Yan Shi and Kai Cheng

A two-stage Markov model–aided frequency-duration technique for reliability analysis of phasor measurement unit microwave communication networks pp. 355-368

Bhargav Appasani and Dusmanta Kumar Mohanta

A model based on hidden graphic evaluation and review technique network to evaluate reliability and lifetime of multi-state systems pp. 369-378

Wenjie Dong, Sifeng Liu, Zhigeng Fang, Yingsai Cao and Ye Ding

Selective maintenance optimization for random phased-mission systems subject to random common cause failures pp. 379-400

Xisheng Jia, Wenbin Cao and Qiwei Hu

The copula-based method for statistical analysis of step-stress accelerated life test with dependent competing failure modes pp. 401-418

Yicheng Zhou, Zhenzhou Lu, Yan Shi and Kai Cheng

On operation termination for degrading systems with two types of failures pp. 419-426

Maxim Finkelstein, Gregory Levitin and Oleg A Stepanov

Selective maintenance optimisation considering random common cause failures and imperfect maintenance pp. 427-443

Wenbin Cao, Xisheng Jia, Yu Liu, Qiwei Hu and Jianmin Zhao

Improving operational reliability of manufacturing systems by process optimization via survival signatures pp. 444-454

Liling Ge and Yingjie Zhang

Operation-oriented reliability and availability evaluation for onboard high-speed train control system with dynamic Bayesian network pp. 455-469

Lei Jiang, Yiliu Liu, Xiaomin Wang and Mary Ann Lundteigen

Survey assessment of organizational resiliency potential of a group of Seveso organizations in Turkey pp. 470-486

Hatice Şengül, Dilem Marşan and Tuğçe Gün

A sparse surrogate model for structural reliability analysis based on the generalized polynomial chaos expansion pp. 487-502

Qian Liu, Xufang Zhang and Xianzhen Huang

Volume 233, issue 2, 2019

Maintenance strategy selection for multi-component systems using a combined analytic network process and cost-risk criticality model pp. 89-104

Mahmood Shafiee, Ashraf Labib, Jhareswar Maiti and Andrew Starr

Selection of time-to-failure model for computerized numerical control turning center based on the assessment of trends in maintenance data pp. 105-117

Rajkumar Bhimgonda Patil, Basavraj S Kothavale and Laxman Yadu Waghmode

Risk analysis in low-voltage distribution systems pp. 118-138

Mostafa Aliyari, Yonas Z Ayele, Abbas Barabadi and Enrique Lopez Droguett

Combination of line sampling and important sampling for reliability assessment of buried pipelines pp. 139-150

Kong Fah Tee and Andrew Utomi Ebenuwa

A new safety and security risk analysis framework for industrial control systems pp. 151-174

Siwar Kriaa, Marc Bouissou and Youssef Laarouchi

Operation reliability evaluation of cutting tools based on singular value decomposition transform and support vector space pp. 175-185

Baojia Chen, Baoming Shen, Fajun Zhang, Wenrong Xiao, Fafa Chen, Hongliang Tian and Shu Chen

Quantitative metrics to analyze supply chain resilience and associated costs pp. 186-199

Araceli Zavala, David Nowicki and Jose Emmanuel Ramirez-Marquez

Availability and maintenance modeling for a two-component system with dependent failures over a finite time horizon pp. 200-210

Qingan Qiu, Lirong Cui and Dejing Kong

A segmental evaluation model for determining residual rail service life based on a discrete-state conditional probabilistic method pp. 211-225

Wenfei Bai, Quanxin Sun, Futian Wang, Rengkui Liu and Ru An

Reliability assessment of the spindle systems with a competing risk model pp. 226-234

Zhaojun Yang, Xiaoxu Li, Chuanhai Chen, Hongxun Zhao, Dingyu Yang, Jinyan Guo and Wei Luo

Fault diagnostic strategy of multivalued attribute system based on growing algorithm pp. 235-245

Heng Tian, Fuhai Duan, Liang Fan and Yong Sang

Modeling and analysis of software fault detectability and removability with time variant fault exposure ratio, fault removal efficiency, and change point pp. 246-256

Subhashis Chatterjee, Ankur Shukla and Hoang Pham

On some characteristics of quality for systems operating in a random environment pp. 257-267

Ji Hwan Cha and Maxim Finkelstein

Influence of respondent type on relationships between safety climate and safety performance in manufacturing firm pp. 268-284

Vedant Singh and Anita Verma

Optimizing maintenance decisions in railway wheelsets: A Markov decision process approach pp. 285-300

Joaquim AP Braga and António R Andrade

Volume 233, issue 1, 2019

Editorial pp. 3-4

Di Zhang and Jin Wang

Voyage optimization for mitigating ship structural failure due to crack propagation pp. 5-17

Helong Wang, Wengang Mao and Di Zhang

Toward a hybrid model of ship performance in ice suitable for route planning purpose pp. 18-34

Jakub Montewka, Floris Goerlandt, Mikko Lensu, Lauri Kuuliala and Robert Guinness

Ship accident consequences and contributing factors analyses using ship accident investigation reports pp. 35-47

Liye Zhang, Hua Wang, Qiang Meng and Hongbin Xie

Mining of inland water traffic accident data using a biclustering algorithm: A case study of the Yangtze River pp. 48-57

Chen Chen, Qing Wu and Song Gao

The role of ship inspections in maritime accidents: An analysis of risk using the bow-tie approach pp. 58-70

Panagiotis Sotiralis, Konstantinos Louzis and Nikolaos P Ventikos

The efficiency improvement of port state control based on ship accident Bayesian networks pp. 71-83

Lixian Fan, Zimeng Zhang, Jingbo Yin and Xingyuan Wang

Reviewers List pp. 84-85

N/a