Journal of Risk and Reliability

2006 - 2025

Bibliographic data for series maintained by SAGE Publications ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 223, issue 4, 2009

Sample average approximation applied to the capacitated-facilities location problem with unreliable facilities pp. 259-269

D Gade and E A Pohl

Use of parameter estimation for the detection and diagnosis of faults on electric train door systems pp. 271-278

H Dassanayake, C Roberts, C J Goodman and A M Tobias

Effect of hourly wind trends on the peak load-carrying capability of wind-integrated power systems pp. 279-287

R Billinton and B Karki

Development of a probabilistic mechanistic model for reliability assessment of gas cylinders in compressed natural gas vehicles pp. 289-299

S Chamberlain, M Chookah and M Modarres

Minimal cutsets-based reduction approach for the use of binary decision diagrams on probabilistic safety assessment fault tree models pp. 301-311

C Ibáñez-Llano, A Rauzy, E Meléndez and F Nieto

Methodological developments for probabilistic risk analyses of socio-technical systems pp. 313-332

A Léger, P Weber, E Levrat, C Duval, R Farret and B Iung

Optimal periodical time for preventive replacement based on a cumulative repair-cost limit and random lead time pp. 333-345

Chien Y-H, Chang C-C and Sheu S-H

Practical approach to dependence modelling using copulas pp. 347-361

A Dutfoy and R Lebrun

Competing risks and opportunistic informative maintenance pp. 363-372

T Bedford and B M Alkali

Optimum simple ramp test for the log-logistic distribution with censoring pp. 373-379

P W Srivastava and R Shukla

Heuristic algorithm for constrained redundancy reliability optimization and performance evaluation pp. 381-386

P Kumar, D K Chaturvedi and G L Pahuja

Exact confidence intervals for Weibull parameters and percentiles pp. 387-394

L D Phan and J I McCool

Volume 223, issue 3, 2009

Nonparametric predictive system reliability with redundancy allocation following component testing pp. 181-188

I M MacPhee, F P A Coolen and A M Aboalkhair

Maintenance optimization for a system with a gamma deterioration process and intervention delay: Application to track maintenance pp. 189-198

C Meier-Hirmer, G Riboulet, F Sourget and M Roussignol

Improved utility and application of probabilistic methods for reliable mechanical design pp. 199-214

Y M Goh, C A McMahon and J D Booker

Physical programming and conjoint analysis-based redundancy allocation in multistate systems: A Taguchi embedded algorithm selection and control (TAS&C) approach pp. 215-232

V V Kumar, M Tripathi, M K Pandey and M K Tiwari

A series—parallel redundant reliability system for cellular manufacturing design pp. 233-250

N Safaei, R Tavakkoli-Moghaddam and F Sassani

Reliability analysis of primary battery packs based on the universal generating function method pp. 251-257

Li C-Y, X Chen and Yi X-S

Volume 223, issue 2, 2009

Imprecise reliability by evidential networks pp. 119-131

C Simon and P Weber

A reliability analysis method using binary decision diagrams in phased mission planning pp. 133-143

D R Prescott, R Remenyte-Prescott, S Reed, J D Andrews and C G Downes

Interruption modelling in electrical power distribution systems using the Weibull—Markov model pp. 145-157

R Medjoudj, D Aissani, A Boubakeur and K D Haim

An approach to reliability evaluation of multiple V-belt drives considering the deviation of belt length pp. 159-166

An Z-W, Huang H-Z and D Lin

True degradation estimation of industrial equipment with fuzzy sets: A case study pp. 167-179

E V Kumar and S K Chaturvedi

Volume 223, issue 1, 2009

A rule-based approach for establishing states in a Markov process applied to maintenance modelling pp. 1-12

T M Welte

Identification of stochastic and deterministic stochastic Petri net models for reliability analysis pp. 13-26

A Ould El Medhi, E Leclercq and D Lefebvre Greah

Multiplatform phased mission reliability modelling for mission planning pp. 27-39

D R Prescott, J D Andrews and C G Downes

Diagnosis and fault signature analysis of a wind turbine at a variable speed pp. 41-50

O Bennouna, N Héraud, H Camblong, M Rodriguez and M A Kahyeh

Reliability assessment of a wind power delivery system pp. 51-58

R Karki and J Patel

Modelling N- and W-shaped hazard rate functions without mixing distributions pp. 59-69

M Bebbington, C D Lai, D N P Murthy and R Zitikis

Parallel systems with different types of defence resource expenditure under two sequential attacks pp. 71-85

Kjell Hausken and G Levitin

Generalized methodology for operational risk analysis of offshore installations pp. 87-97

J E Vinnem, J Seljelid, S Haugen, S Sklet and T Aven

Selection of condition monitoring techniques using discrete probability distributions: A case study pp. 99-117

M C Carnero

Volume 222, issue 4, 2008

Tribute to Pauline Coolen—Schrijner pp. i-ii

Thomas Augustin

Nonparametric predictive inference for system reliability with redundancy allocation pp. 463-476

P Coolen-Schrijner, F P A Coolen and I M MacPhee

Modelling and analysis of risk and reliability for a contingency logistics supply chain pp. 477-494

M Miman and E Pohl

Guarded transition systems: A new states/events formalism for reliability studies pp. 495-505

A B Rauzy

Improved modular reliability analyses of hybrid phased mission systems pp. 507-520

A Shrestha and L Xing

Common-cause failure analysis in event assessment pp. 521-532

D M Rasmuson and D L Kelly

Insights from analysing the Nuclear Regulatory Commission's common-cause failure database pp. 533-544

D M Rasmuson, A Mosleh and T E Wierman

Piecewise deterministic Markov processes and dynamic reliability pp. 545-551

H Zhang, F Dufour, Y Dutuit and K Gonzalez

Maintenance modelling and scheduling in fault-tolerant control pp. 553-560

H Li and Q Zhao

Enhanced diagnosis of faults using the digraph approach applied to a dynamic aircraft fuel system pp. 561-572

E M Kelly and L M Bartlett

Some disturbing facts about depth-first left-most variable ordering heuristics for binary decision diagrams pp. 573-582

A B Rauzy

On the odd Weibull distribution pp. 583-594

H Jiang, M Xie and L C Tang

Using the peak heat release rate to determine the fire risk level of road tunnels pp. 595-604

M K Cheong, M Spearpoint and C M Fleischmann

Reasoning in reliability-centred maintenance based on a Dempster—Shafer approach pp. 605-612

U K Rakowsky and U Gocht

Maintenance policy for a deteriorating system evolving in a stressful environment pp. 613-622

E Deloux, B Castanier and C Bérenguer

Quantification of fault trees containing mutually exclusive events pp. 623-634

S Contini

Coloured Petri nets and a dynamic reliability problem pp. 635-642

P Škňouřilová and R Briš

A proportional intensity segmented model for maintained systems pp. 643-654

A Syamsundar and V N A Naikan

Single-objective deterministic versus multi-objective stochastic water network design: Practical considerations for the water industry pp. 655-665

Y R Filion

System reliability and safety assessment using non-parametric flowgraph models pp. 667-674

D H Collins and A V Huzurbazar

Reliability and performance assessment for fuzzy multi-state elements pp. 675-686

Y Liu, Huang H-Z and G Levitin

Hardware versus lumped cross-monitoring in smart multilane torque-summed electromechanical actuators pp. 687-699

F Y Annaz

Using Bayesian networks to predict software defects and reliability pp. 701-712

N Fenton, M Neil and D Marquez

Bayesian reliability applications of a combined lifecycle failure distribution pp. 713-720

D Briand and A V Huzurbazar

Volume 222, issue 3, 2008

Guest Editorial pp. i-iii

Aven Terje and Vinnem Jan Erik

An offshore safety system optimization using an SPEA2-based approach pp. 271-282

J Riauke and L M Bartlett

A methodology for the implementation of production assurance programmes in production plants pp. 283-290

J Barabady and T Aven

Modelling uncertainty in fault tree analyses using evidence theory pp. 291-302

P Limbourg, R Savić, J Petersen and Kochs H-D

Consideration of human actions in combination with the probabilistic dynamics method Monte Carlo dynamic event tree pp. 303-313

M Kloos and J Peschke

An approach for evaluating and selecting methods for risk and vulnerability assessments pp. 315-326

E P Ford, T Aven, W Røed and H S Wiencke

Optimal protection of complex networks exposed to a terrorist hazard: A multi-objective evolutionary approach pp. 327-335

D E Salazar A, C M Rocco S and E Zio

Events group risk importance by genetic algorithms pp. 337-346

L Podofillini and E Zio

Maintenance modelling and optimization integrating strategies and human resources: Theory and case study pp. 347-357

S Martorell, A Sánchez, M Villamizar and G Clemente

Maintenance decision rule with embedded online Bayesian change detection for gradually non-stationary deteriorating systems pp. 359-369

A Grall and M Fouladirad

A snapshot of methods and tools to assess safety integrity levels of high-integrity protection systems pp. 371-379

Y Dutuit, A B Rauzy and Signoret J-P

Design allocation of multistate series-parallel systems for power systems planning: A multiple objective evolutionary approach pp. 381-391

H A Taboada, J F Espiritu and D W Coit

Efficient extraction of the structure formula from reliability block diagrams with dependent basic events pp. 393-402

M Pock and M Walter

Safety and inspection planning of older installations pp. 403-417

J D Sørensen and G Ersdal

Risk analysis of level crossing accidents based on systems control for safety pp. 419-429

T Kohda and H Fujihara

Application of risk assessment for the NASA Vision for Space Exploration pp. 431-438

B F Putney and J R Fragola

Safety-barrier diagrams pp. 439-448

N J Duijm

Importance measure on finite time horizon and application to Markovian multistate production systems pp. 449-461

P Do Van, A Barros and C Berenguer

Volume 222, issue 2, 2008

Multistate systems with static performance- dependent fault coverage pp. 95-103

G Levitin and S V Amari

Generalizing event trees using Bayesian networks pp. 105-114

D W R Marsh and G Bearfield

Fusion of artificial neural networks and genetic algorithms for multi-objective system reliability design optimization pp. 115-126

E Zio, F Di Maio and S Martorell

Analysis of non-coherent fault trees using ternary decision diagrams pp. 127-138

R Remenyte-Prescott and J Andrews

Reliable fault diagnosis scheme for a spacecraft attitude control system pp. 139-152

R J Patton, F J Uppal, S Simani and B Polle

A multi-objective genetic algorithm for RAMS+C optimization with uncertain decision variables pp. 153-160

S Martorell, A Sánchez, J F Villanueva, S Carlos and V Serradell

Component reliability in fault-diagnosis decision making based on dynamic Bayesian networks pp. 161-172

P Weber, D Theilliol and C Aubrun

A ternary decision diagram method to calculate the component contributions to the failure of systems undergoing phased missions pp. 173-187

J D Andrews

Genetic algorithms for signal grouping in sensor validation: A comparison of the filter and wrapper approaches pp. 189-206

P Baraldi, E Zio, G Gola, D Roverso and M Hoffmann

Wear detection of rolling element bearings using multiple-sensing technologies and mixture-model-based clustering method pp. 207-218

S L Chen, R J K Wood, L Wang, R Callan and H E G Powrie

Shaft diagnostics and prognostics development and evaluation using damaged dynamic simulation pp. 219-233

S Wu and D He

Identifying critical components in technical infrastructure networks pp. 235-243

H Jönsson, J Johansson and H Johansson

Managing and predicting technological risk and human reliability: A new learning curve theory pp. 245-254

R B Duffey and J W Saull

Quantitative assessment of protection system reliability incorporating human errors pp. 255-263

A H Etemadi and M Fotuhi-Firuzabad

Discussion a discussion of statistical testing on a safety-related application pp. 265-269

F P A Coolen

Volume 222, issue 1, 2008

Reliability modelling for biological ageing pp. 1-6

M S Finkelstein

Variable ordering schemes to apply to the binary decision diagram methodology for event tree sequences assessment pp. 7-16

C Ibáñez-Llano, E Meléndez and Nieto F

Genetic multistart algorithm for the design of fault-tolerant systems pp. 17-29

K Echtle, I Eusgeld and D Hirsch

A combined Monte Carlo and cellular automata approach to the unreliability analysis of binary network systems pp. 31-38

E Zio, M Librizzi and G Sansavini

Evaluation of significant transitions in the influencing factors of human reliability pp. 39-45

M Konstandinidou, Z Nivolianitou, C Kiranoudis and N Markatos

A case comparison of a proportional hazards model and a stochastic filter for condition-based maintenance applications using oil-based condition monitoring information pp. 47-55

M J Carr and W Wang

A framework of indicators for the potential influence of Air Navigation Services on air traffic safety in Europe pp. 57-78

H H de Jong, F Preti and G W H van Es

A model-based approach for systematic risk analysis pp. 79-93

Flaus J-M