Research in Agricultural Engineering

2003 - 2025

Current editor(s): Bc. Michaela Polcarová

From Czech Academy of Agricultural Sciences
Bibliographic data for series maintained by Ivo Andrle ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

2025, volume 71, articles 3

Modelling for a land suitability analysis of rice terraces on the upland area using the geographic information system (GIS) and analytical hierarchical process (AHP) pp. 121-129

Razali, Rahmawaty, Chairani Hanum and Zulkifli Nasution

Balancing quality and safety: Optimising drying and sodium metabisulphite use in low-fat desiccated coconut pp. 130-142

Indriati Cahyadewi, Waqif Agusta, Rumpoko Wicaksono, Tantry Eko Putri Mariastuty, Lusiana Kresnawati Hartono, Herdiarti Destika Hermansyah and Farah Nuranjani

Addressing water scarcity in agriculture through small reservoir construction in Kashkadarya Province pp. 143-154

Khojiakbar Khasanov, Masharif Bakiev, Oqil Rasulov, Nodira Babajanova and Ilhom Abdurahmanov

Optimisation of the temperature and drying time of kaffir lime leaves (Citrus hystrix DC.) using Response Surface Methodology pp. 155-162

Asri Widyasanti, Sintia Nabila Putri, Rahmat Budiarto and Nor Nadiah Abdul Karim Shah

Rheological properties of banana fruit in the creep test: Effect of variety and ripeness level pp. 163-173

Nursigit Bintoro, Bambang Purwantana, Bayu Nugraha, Surya Abdul Muttalib, Slamet Sulistiadi and Vivien Fathuroya

Free electricity tandem-twin-hybrid solar-biomass dryer increased the performance of coffee cherry drying pp. 174-187

Yuwana Yuwana and Syafnil Syafnil

2025, volume 71, articles 2

Perception of bimodal warning cues during remote supervision of autonomous agricultural machines pp. 69-79

Anita Chidera Ezeagba, Cheryl Mary Glazebrook and Daniel Delmar Mann

Spoilage detection of tomatoes using a convolutional neural network pp. 80-87

Ninja Begum and Manuj Kumar Hazarika

Stability of soil moisture sensors for agricultural crop cultivation pp. 88-94

Sitti Nur Faridah, Muhammad Tahir Sapsal, Tisha Aditya A. Jamaluddin, Andini Dani Achmad and Muhammad Adi Surya

Enhancing the destructive egg quality assessment using the machine vision and feature extraction technique pp. 95-104

Ehsan Sheidaee and Pourya Bazyar

Camera systems and their user recognition reliability when entering an agri-food complex pp. 105-112

Jaroslav Mrázek, Jakub Vošáhlík, Eva Olmrová, Martin Pexa, Zdeněk Aleš and Jakub Čedík

Portable analogue-based electronic moisture meter for root-crop chips pp. 113-120

James Roy Lesidan, Mencius Lesidan, Melvin Hagonob, Charlie Andan, Ma. Grace Sumaria, Ronaldo Almencion and Kebin Ysrael Martinez

2025, volume 71, articles 1

Towards interpretability: Assessment of residual networks for tomato leaf disease classification pp. 1-9

Raphael Berdin and Rob Christian Caduyac

Anaerobic bio-processing of agricultural waste for the biotechnological production of lactic acid and volatile fatty acid by landfill soil inoculums pp. 10-21

Andriy Anta Kacaribu, Darwin Darwin, Yuliani Aisyah and Febriani

An effective machine learning model for the estimation of reference evapotranspiration under data-limited conditions pp. 22-37

Saravanan Karuppanan, Saravanan Ramasamy, Balaji Lakshminarayanan and Sreemanthrarupini Nariangadu Anuthaman

Development of smart micro-irrigation system using Arduino Uno for okra cultivation in Bangladesh pp. 38-49

Sharmin Akter, Md Mostafizar Rahman, Rafatul Zannat, Md Masud Rana, Md Moinul Hossain Oliver and Md Aslam Ali

Particle motion in mixed flow dryers: The effect of the wall inclination angle and friction pp. 50-59

Adrienn Bablena, János Beke and István Keppler

Use of thermal imaging camera for wild animal detection along roads pp. 60-67

Jiří Brožovský, Veronika Hartová, Martin Kotek, Jan Hart and Jitka Kumhálová

2024, volume 70, articles 4

Control of odour and gaseous emissions from livestock buildings: Recent research and developments pp. 181-197

Roger Jay Lamadrid De Vela

Modelling of energy demand prediction system in potato farming using deep learning method pp. 198-208

Riswanti Sigalingging, Nasha Putri Sebayang, Noverita Sprinse Vinolina and Lukman Adlin Harahap

Modeling and optimization of dynamic isothermal compressibility features on flowability of Canarium schweinfurthii Engl nutshell powder pp. 209-217

James Chinaka Ehiem, Victor Ifeanyichukwu Obiora Ndirika, Udochukwu Nelson Onwuka and Raghavan Vijayan

Prediction of physicochemical characteristics of Lemon (Citrus limon cv. Montaji Agrihorti) using Vis-NIR spectroscopy and machine learning model pp. 218-225

Jihan Nada Salsabila Erha, Dina Wahyu Indriani, Zaqlul Iqbal, Bambang Susilo and Dimas Firmanda Al Riza

Ergonomic investigation on spraying task performance in paddy farming activities pp. 226-236

Dian Mardi Safitri, Novia Rahmawati, Winnie Septiani, Nora Azmi, Azizah Nurul Hanifati, Ummi Noor Nazahiah binti Abdullah and Norashiken binti Othman

Geometrical analysis of 3-point linkage of tractors for measurement and display of implement's working depth pp. 237-244

P K Pranav, Anmol Kumar, Abhishek Kumar Ansh and Sanjay Kumar

2024, volume 70, articles 3

The effect of parameter adjustment in sago palm classification-based convolutional neural network (CNN) model pp. 123-133

Sri Murniani Angelina Letsoin and David Herák

Detecting adulteration in mustard oil using low-frequency dielectric spectroscopy pp. 134-142

Venkatesh Mishra, Satyendra Pratap Singh, Sumit Kaur Bhatia, Vishal Singh Chandel and Rajiv Manohar

The effect of stimulants on the responsiveness and biorhythms of young operators of agricultural machinery pp. 143-154

Veronika Hartová and Jan Hart

Advancements in fuzzy expert systems for site-specific nitrogen fertilisation: Incorporating RGB colour codes and irrigation schedules for precision maize production in Bangladesh pp. 155-166

Bitopi Biswas, Mohammad Tariful Alam Khan, Mohammad Billal Hossain Momen, Mohammad. Rashedur Rahman Tanvir, Abu Mohammad Shahidul Alam and M Robiul Islam Islam

The efficiency of unmanned aerial vehicles application for rapeseed productivity in Ukraine pp. 167-173

Fedir Melnychuk, Svitlana Alekseeva, Oleksandra Hordiienko, Oleksii Nychyporuk, Andrii Borysenko and Nataliia Didenko

Effect of physical energy on germination and seedling vigor of alfalfa seeds (Medicago sativa L.) pp. 174-180

Ali Hajizadeh Namin, Abbas Akbarnia, Rouzbeh Abbaszadeh, Ali Zenouzi and Majid Masoumian

2024, volume 70, articles 2

Location-specific technology transfer model in an agricultural technology park, Indonesia pp. 61-72

Harmi Andrianyta, Elisa Anggraeni, Sapta Raharja and Sukardi Sukardi

Drying and color kinetics of decorticated queen pineapple (Ananas comosus Linn.) fiber bleached with hydrogen peroxide solution pp. 73-81

Roger Jay Lamadrid De Vela and Arnold Recidocruz Elepano

Application of the physical properties of local cowpea varieties in the development of a multi-variety cowpea cleaner pp. 82-91

Babatunde Olusola Adetifa, Elizabeth Ayobami Olumomi, Taiwo Moses Samuel and Ayoola Abiola Babalola

Study on parameters affecting vibration in height adjustment of a combine harvester header model pp. 92-103

Kittikhun Prasertkan, Prathuang Usaborisut, Krittatee Jindawong, Kiatkong Suwannakij and Anusorn Iamrurksiri

Influence of soil tillage technology on tillage erosion pp. 104-110

Jaroslav Korba, Pavel Brož, Josef Hůla, Petr Novák and Václav Novák

Digital image processing for preliminary detection of infected porang (Amorphophallus muelleri) seedlings pp. 111-121

Aryanis Mutia Zahra, Noveria Anggi Nurrahmah, Sri Rahayoe, Rudiati Evi Masithoh, Muhammad Fahri Reza Pahlawan and Laila Rahmawati

2024, volume 70, articles 1

The state of agricultural digitalisation in Hungary pp. 1-12

Dániel Fróna

Enhancing melon yield through a low-cost drip irrigation control system with time and soil sensor pp. 13-22

Thawatchai Thongleam, Kriengkrai Meethaworn and Sanya Kuankid

Fabrication and performance test of a multipurpose ohmic heating apparatus with a real-time data logging system based on low-cost sensors pp. 23-34

Diang Sagita, Dadang Dayat Hidayat, Doddy Andy Darmajana, Ari Rahayuningtyas and Hari Hariadi

Energy and carbon dioxide emission analysis of a batch-mode paddy drying process in a rotary dryer pp. 35-42

Dewi Qurrota A'yuni, Dede Kurniawan, Muhammad Pradhipta Irwanda Prayoga, Andri Cahyo Kumoro, Mohamad Djaeni and Agus Subagio

Comparison of experimental and numerical results on flow uniformity of seeds transmitted from the studded feed roller pp. 43-52

Mustafa Gokalp Boydas

Reconstructed military machine for unique field testing of agricultural machinery capabilities pp. 53-59

Kornél Szalay, Jiří Souček, Gábor Bércesi, Adrienn Bablena, Kovács Lászlo, Sayakhat Orazovich Nukeshev, Savelii Kuharets, Volodymyr Kravchuk, Gennadii Golub, Antonín Machálek and Aleksandr Vladimirovich Dobrinov

2023, volume 69, articles 4

Mathematical modeling of drying parameters of moringa oleifera leaves in a cabinet drye pp. 159-166

Timothy Adekanye, Abiodun Okunola, Olumuyiwa Moses, Endurance Idahosa, Yisa Boye and Aminu Saleh

Development and evaluation of an electromagnetic device to improve the physiological properties of some crop seeds pp. 167-178

Ahmed Shawky El-Sayed

Operating performance of manual, semi-automatic, and automatic tractor guidance systems for precision farming pp. 179-188

Paola D'Antonio, Andi Mehmeti, Francesco Toscano and Costanza Fiorentino

Determination of sorghum production energy input-output balance under farmers' practices in the Hararghe lowland areas of Ethiopia pp. 189-198

Birhanu Gurracho, Yetenayet Tola, Abebe Badie, Solomon Habtegabriel and Sirawdink Forsido

Utilisation of rheological models for describing the mechanical behaviour of oil palm empty fruit bunches under compression loading pp. 199-205

Tomáš Saller and David Herák

Development of microclimate in the New Holland T6.165 tractor pp. 206-210

Jan Hart and Veronika Hartová

2023, volume 69, articles 3

3D finite element analysis of tine cultivator and soil deformation pp. 107-117

Muhammad Hashaam, Muhammad Waqar Akram, Moaz Ahmad, Muhammad Zuhaib Akram, Muhammad Faheem, Muhammad Maqsood and Muhammad Aleem

Design and construction of coffee roasting machine with rounding cylinder tube using electric heat source pp. 118-123

Andriani Lubis, Syafriandi Syafriandi, Muhammad Idkham and Ari Maulana

Enhanced biodiesel production from waste cooking oils catalyzed by sodium hydroxide supported on heterogeneous co-catalyst of bentonite clay pp. 124-131

Darwin Darwin, Rini Ayu Marisa Harahap, Atmadian Pratama, Muhammad Thifa and Muhammad A Alwi Fayed

A novel hybrid feature method for weeds identification in the agriculture sector pp. 132-142

Sheeraz Arif Arif, Rashid Hussain, Nadia Mustaqim Ansari and Waseem Rauf

Study on drying of bitter gourd slices based on halogen dryer pp. 143-150

Dinh Anh Tuan Tran, Tuan Nguyen Van, Dinh Nhat Hoai Le and Thi Khanh Phuong Ho

Evaluation and modelling of biogas production from batch anaerobic digestion of corn stover with oxalic acid pp. 151-157

Shitophyta Lukhi Mulia, Arnita Arnita and Wulansari Hilda Dyah Ana

2023, volume 69, articles 2

Evaluation of low temperature drying characteristics of fresh tea leaves (Camellia assamica) in an environmental chamber using mathematical models pp. 55-64

Anindita Sharma and Partha Pratim Dutta

Comparison of the machine learning and AquaCrop models for quinoa crops pp. 65-75

Rossy Chumbe, Stefany Silva and Yvan Garcia

Contrasting tillage systems and vertical arable layer stratification impacts on soil aggregates and root biomass in Lithuania pp. 76-84

Inga Andruškaité and Vaclovas Bogužas

Field evaluation of a bent leg tillage implement in dry soil conditions pp. 85-93

Aliakbar Solhjou and Sayed Mansor Alavimanesh

The effect of large doses of organic fertilisers on maize pp. 94-100

Pavel Brož, Jaroslav Korba, Jitka Edrová, Josef Hůla and Petr Šařec

Influence of primary tillage on the displacement of soil particles pp. 101-106

Pavel Brož and Josef Hůla

2023, volume 69, articles 1

Thin layer drying characteristics of alligator pepper, ginger and turmeric pp. 1-8

Adebayo Olasunkanmi Salau, Babatunde Sunday Ogunsina, Adewale Waliu Adebayo and Adekunle Felix Okunade

Model development and optimisation of the disc plough efficiency on loamy-sand soil in South-East Nigeria pp. 9-17

Okechukwu Oduma, Precious Ehiomogue and Dilibe Ifanyi Ntunde

Influence of the excavator hydraulic system efficiency on the productivity pp. 18-27

Michal Jůza and Petr Heřmánek

Dielectric properties of materials for 3D printing at high frequencies pp. 28-35

Tomáš Pícha and Stanislava Papežová

Estimation of corn coefficients with vegetation indices using multispectral camera and drone pp. 36-47

Christos Dimitrios Papanikolaou and Maria Andreas Sakellariou-Makrantonaki

Development and evaluation of a low-cost evaporative cooling system for agricultural product storage pp. 48-53

Natesan Kapilan and Vijay Kumar Patil