Research in Agricultural Engineering
2003 - 2026
Current editor(s): Bc. Michaela Polcarová From Czech Academy of Agricultural Sciences Bibliographic data for series maintained by Ivo Andrle (). Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.
Volume 66, issue 4, 2020
- Field evaluation of a vibrating dual bent-share cultivator pp. 123-130

- Ali Esehaghbeygi, Milad Abedi, Jalil Razavi and Abbass Hemmat
- Analysis of the physical-mechanical properties of a pelleted chicken litter organic fertiliser pp. 131-139

- Anna Brunerová, Miroslav Müller, Gürkan Alp Kağan Gürdil, Vladimír Šleger and Milan Brožek
- Comparison of two electric vehicles in terms of real range in different types of operations pp. 140-145

- Veronika Štekerová, Martin Kotek and Veronika Hartová
- A study of nanomaterial transportation in the soil by finite difference approximations pp. 146-155

- Jaldair Araújo e Nóbrega, André Luis dos Santos Hortelan, Carlos Henrique Portezani and Eriton Rodrigo Botero
- Physical and mechanical properties of berries and biological features of red currant growth for mechanized harvesting pp. 156-163

- Olga Panfilova, Olga Kalinina, Olga Golyaeva, Sergey Knyazev and Mikhail Tsoy
Volume 66, issue 3, 2020
- Electrohydrodynamic, oven and natural drying of mint leaves and effects on the physiochemical indices of the leaves pp. 81-88

- Ali Esehaghbeygi and Zahra Karimi
- Efficiency of a modified plastic tank as a bio-degradation system in Sub-Saharan African countries pp. 89-96

- Chibuzo Stanley Nwankwo, Chigozie Francis Okoyeuzu and Ikpeama Ahamefula
- Electronic nose sensor development using ANN backpropagation for Lombok Agarwood classification pp. 97-103

- Farel Ahadyatulakbar Aditama, Lalu Zulfikri, Laili Mardiana, Tri Mulyaningsih, Nurul Qomariyah and Rahadi Wirawan
- Specific energy consumption of a Moringa oleifera seed shelling machine pp. 104-111

- Oluwaseyi Kayode Fadele, Ademola Olagoke Afolabi, Dolapo Opeyemi Oloyede, Olufemi Olusola Adedire, Hafsat Bankole and Adeniyi Adetunji
- Changes of root zone temperature, growth and productivity of broccoli cultivated with coloured plastic mulches pp. 112-121

- El-Sayed Khater, Ramy Hamouda and Harby Mostafa
Volume 66, issue 2, 2020
- Influence of magnetised irrigation water on the fertigation process and potato productivity pp. 43-51

- Harby Mostafa
- Uncertainty estimation of the mean specific heat capacity for the major gases contained in biogas pp. 52-59

- P. Trávníček and I. Vitázek
- Evaluation of the stress state of a cultivator blade in production and operation pp. 60-65

- Tamara Skoblo, Ivan Rybalko, Aleksandr Tihonov and Taras Maltsev
- Effectiveness of an evaporative charcoal cooler for the postharvest preservation of tomatoes and kales pp. 66-71

- Erick Kiplangat Ronoh, Christopher Luchebeleli Kanali and Samuel Njuguna Ndirangu
- Assessment of a submerged membrane bioreactor with composite ceramic filters for cassava wastewater treatment pp. 72-79

- Nurudeen Samuel Lawal, Kolawole Ogedengbe, Olukayode Omotayo Smith Ojo and Abubakre Adeyanju Odufowokan
Volume 66, issue 1, 2020
- Dielectric technique combined with artificial neural network and support vector regression in moisture content prediction of olive pp. 1-7

- Mahdi Rashvand and Mahmoud Soltani Firouz
- Pyrolysis of wheat and barley straw pp. 8-17

- Anežka Sedmihradská, Michael Pohořelý, Petr Jevič, Siarhei Skoblia, Zdeněk Beňo, Josef Farták, Bohumír Čech and Miloslav Hartman
- Investigation of sectional operating elements for conveying agricultural materials pp. 18-26

- Roman Hevko, Roman Rohatynskyi, Myroslav Hevko, Oleg Lyashuk and Oleksandra Trokhaniak
- Study on the effect of the teat reaction on the time components of the pulsogram in various types of milking liners pp. 27-32

- Kancho Peychev and Galina Dineva
- Research of a contact impact of a root crop with a screw auger pp. 33-42

- Viktor Baranovsky, Olena Truhanska, Maria Pankiv and Valentina Bandura
Volume 65, issue 4, 2019
- Evaluation of a manual olive fruit harvester for small producers pp. 105-111

- Eddy Plasquy, Rafael R. Sola-Guiraldo, María del Carmen Florido, José M. García and Gregorio Blanco-Roldán
- The evaluation of vibration damage in fresh apricots during simulated transport pp. 112-122

- Mehdi Khodaei, Sadegh Seiiedlou and Morteza Sadeghi
- Laser diffraction analysis of purified Descurainia Sophia seeds by a tribo-aero-electrostatic system pp. 123-130

- Mojtaba Afsharipour, Kazem Jafari-Naeimi and Hadi Samimi-Akhijahani
- The physical properties and strength characteristics of kenaf plants pp. 131-136

- Olumide Falana, Olabanjo Aluko, Dare Adetan and Jimmy Osunbitan
- Modelling the drying characteristics of the traditional Indonesian crackers "kerupuk" pp. 137-144

- Annisa Kusumaningrum, Dwi Joko Prasetyo, Ervika Rahayu Novita Herawati and Asep Nurhikmat
Volume 65, issue 3, 2019
- The physical and mechanical properties of potato (Solanum tuberosum L.) tubers as related to the automatic separation from clods and stones pp. 77-84

- Ghasem Abedi, Shamsollah Abdollahpour and Mohammad Reza Bakhtiari
- Comparative study of the force action of harvester work tools on potato tubers pp. 85-90

- Alexei Siberev, Alexandr Aksenov, Alexei Dorokhov and Andrei Ponomarev
- Innovative and flexible single screw press for the oil extraction of Calophyllum seeds pp. 91-97

- Yuli Setyo Indartono, Heriawan Heriawan and Ika Amalia Kartika
- Flare stacks on agricultural biogas plants - safety and operational requirements pp. 98-104

- Petr Trávníček, Luboš Kotek, Vlastimil Nejtek, Tomáš Koutný, Petr Junga and Tomáš Vítěz
Volume 65, issue 2, 2019
- Determination of the physical and mechanical properties of a potato (the Agria variety) in order to mechanise the harvesting and post-harvesting operations pp. 33-39

- Negar Ahangarnezhad, Gholamhassan Najafi and Ahmad Jahanbakhshi
- The moisture-dependent flow characteristics of Canarium schweinfurthii Engler nuts pp. 40-47

- James Chinaka Ehiem, Victor Ifeanyichukwu Obiora Ndirika, Udochukwu Nelson Onwuka and Vijaya Raghavan
- An evaluation of the physical, dynamic and aerodynamic properties of olives pp. 48-55

- Abbas Akbarnia and Mahdi Rashvand
- Moisture dependent thermal properties of selected vegetables in Akwa Ibom State, Nigeria pp. 56-62

- Olugbenga Abiola Fakayode and Olayemi Olubunmi Ojoawo
- A binary solvent for the simultaneous Calophyllum oil-resin extraction and purification pp. 63-69

- Ika Amalia Kartika, Oky Tresia Ordian Bernia, Illah Sailah, Tirto Prakoso and Yohanes Aris Purwanto
- Using a fuzzy control system to optimise the parametric method for selecting the appropriate irrigation system pp. 70-75

- Yaser Hoseini and Manochehr Shiri Janaghard
Volume 65, issue 1, 2019
- LIST OF REVIEWERS - 2018 pp. I

- Editors
- Comparative kinetic analysis of convective and vacuum dried Opuntia ficus-indica (L.) Mill. cladodes pp. 1-6

- Anirban Dey, Somya Singhal, Prasad Rasane, Sawinder Kaur, Navneet Kaur and Jyoti Singh
- Effect of moisture content on terminal velocity of lentil grain pp. 7-12

- Zahra Basati, Ezzatollah Askari Asli- Ardeh and Vali Rasooli-Sharabiani
- Temperature and relative humidity effect on equilibrium moisture content of cassava pulp pp. 13-19

- Ratinun Luampon and Suparerk Charmongkolpradit
- Determination the parameters and modes of new heliocollectors constructions work for drying grain and vegetable raw material by active ventilation pp. 20-24

- Boris Kotov, Anatoly Spirin, Roman Kalinichenko, Valentyna Bandura, Yurii Polievoda and Ihor Tverdokhlib
- Assessment of the harvesting costs of different combine harvester fleets pp. 25-32

- Jüri Olt, Keio Küüt, Risto Ilves and Arne Küüt
Volume 64, issue 4, 2018
- Viscosity and biodiesel characteristics of wild Canarium schweinfurthii Engl. fruit oil pp. 169-175

- Ehiem James Chinaka
- Impact of forced air flow upon introducing pesticides under conditions of lateral wind pp. 176-180

- Semjons Ivanovs, Volodymyr Panasyuk, Volodymyr Bulgakov and Ilmars Dukulis
- Magnetic-pulse processing of seeds of berry crops pp. 181-186

- Andrey Yurievich Izmailov, Igor Gennadievich Smirnov, Dmitry Olegovich Khort, Rostislav Alexandrovich Filippov and Alexey Igorevich Kutyrev
- Optimization of tillage and sowing operations using discrete event simulation pp. 187-194

- Armaghan Kosari Moghaddam, Hassan Sadrnia, Hassan Aghel and Mohammad Bannayan
- Substantiation of the parameters of the disk-knife working body and the study of its work pp. 195-201

- Savelii Kukharets, Gennadii Golub, Viktor Biletskii and Oleksandr Medvedskyi
- Mechanical properties of blueberry stems pp. 202-208

- Margus Arak, Kaarel Soots, Marge Starast and Jüri Olt
- Harvesting Lupinus albus axial rotary combine harvesters pp. 209-214

- Nikolay Aldoshin and Otari Didmanidze
Volume 64, issue 3, 2018
- Finite element simulation of temperature variation in grain metal silo pp. 107-114

- Mohammed Gana Yisa, Adeshina Fadeyibi, O.I.O. Adisa and Kehinde Peter Alabi
- Method of justification of the grain cleaning assembly performance pp. 115-120

- Vladimir Shepelev, Sergey Shepelev and Zlata Almetova
- Assessment of gross calorific value of crop and bio-energy residues pp. 121-127

- János Jóvér, Károly Antal, József Zsembeli, Lajos Blaskó and János Tamás
- Enhancement anaerobic digestion and methane production from kitchen waste by thermal and thermo-chemical pretreatments in batch leach bed reactor with down flow pp. 128-135

- Seyed Abbas Radmard, Hossein Haji Agha Alizadeh and Rahman Seifi
- Effects of polymer cyclohexane application on lentil pod shatter in semi-arid region of Turkey pp. 136-142

- Hasan Aslan, Mahmut Gayberi and Abdullah Kahraman
- Theoretical studies of interaction of the drum cleaner with the sugar beet head pp. 143-150

- Volodymyr Bulgakov, Semjons Ivanovs, Valerii Adamchuk and Stanislav Smolinskyi
- Technology and mechanization of cultivation of Jerusalem artichoke healthier pp. 151-156

- Viktor I. Starovoitov, Oksana A. Starovoitova, Nikolay Aldoshin and Aleksandra A. Manokhina
- Effect of growing media on mat type seedling raised for mechanical rice transplanting pp. 157-167

- Anwar M. Hossen, Mosharraf M. Hossain, Enamul M. Haque and Richard W. Bell
Volume 64, issue 2, 2018
- Flow rate of liquid cattle manure leakage into subsoil during storage pp. 49-54

- Jiří Vegricht, Josef Šimon, David Hájek and Jiří Bradna
- Evaluation of the coefficient of uniformity and non-uniformity of irrigation for wide-range irrigators in various field conditions pp. 55-62

- Ján Jobbágy and Koloman Krištof
- Functional properties of blade tiller working tools pp. 63-69

- Radek Pražan, Josef Hůla, Pavel Kovaříček, Jakub Čedík, Ilona Gerndtová and Marcela Vlášková
- Indicators of а fruit detacher with non-symmetric angular oscillations at removing tomato fruits pp. 70-76

- Stoyan Ishpekov, Petar Petrov, Rangel Zaykov and Nayden Naydenov
- Mechanical test suitable for detection of bug-damage wheat grains abstract pp. 77-84

- Zahra Basati, Mansour Rasekh and Yousef Abbaspour-Gilandeh
- Engine performance and exhaust emission characteristics of paraffinic diesel fuel in a model diesel engine pp. 85-95

- Petr Jevič, Radek Pražan and Zdeňka Šedivá
- Changes in nutritional and energy properties of soybean seed and hull after roasting pp. 96-103

- Tajana Krička, Ana Matin, Neven Voća, Ana Pospišil, Mateja Grubor, Ivana Šaronja and Vanja Jurišić
- Application of eggshell wastes as valuable and utilizable products: A review pp. 104-114

- Hamideh Faridi and Akbar Arabhosseini
Volume 64, issue 1, 2018
- Study of effectiveness of controlled traffic farming system and wide span self-propelled gantry-type machine pp. 1-7

- Volodymir Bulgakov, Valerii Adamčuk, Ladislav Nozdrovický and Volodymir Kuvačov
- Investigating soil compaction using strain transducer pp. 8-14

- Gholamhossein Shahgholi and Mohammad Reza Aboali
- Effect of biomass characteristics on durability of Cassava stalk residues pellets pp. 15-19

- Nisanath Kaewwinud, Porntep Khokhajaikiat and Apichart Boonma
- Conceptual design and evaluation of the alternative construction of lightweight hall building with polygonal ground plan and canvas roofing pp. 20-25

- Petr Junga, Terezie Vondráčková and Jan Mareček
- Ammonia and greenhouse gas emissions from slatted dairy barn floors cleaned by robotic scrapers pp. 26-33

- Alessandro Chiumenti, Francesco da Borso, Andrea Pezzuolo, Luigi Sartori and Roberto Chiumenti
- Treatment of spring wheat seeds by ozone generated from humid air and dry oxygen pp. 34-40

- Alexander Lazukin, Yuri Serdukov, Mikhail Pinchuk, Olga Stepanova, Sergey Krivov and Irina Lyubushkina
- Non-isothermal kinetic analysis of the thermal decomposition of spruce wood in air atmosphere pp. 41-46

- Tomáš Ondro, Ivan Vitázek, Tomáš Húlan, Michael K. Lawson and Štefan Csáki
| |