Research in Agricultural Engineering

2003 - 2026

Current editor(s): Bc. Michaela Polcarová

From Czech Academy of Agricultural Sciences
Bibliographic data for series maintained by Ivo Andrle ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 69, issue 4, 2023

Mathematical modeling of drying parameters of moringa oleifera leaves in a cabinet drye pp. 159-166

Timothy Adekanye, Abiodun Okunola, Olumuyiwa Moses, Endurance Idahosa, Yisa Boye and Aminu Saleh

Development and evaluation of an electromagnetic device to improve the physiological properties of some crop seeds pp. 167-178

Ahmed Shawky El-Sayed

Operating performance of manual, semi-automatic, and automatic tractor guidance systems for precision farming pp. 179-188

Paola D'Antonio, Andi Mehmeti, Francesco Toscano and Costanza Fiorentino

Determination of sorghum production energy input-output balance under farmers' practices in the Hararghe lowland areas of Ethiopia pp. 189-198

Birhanu Gurracho, Yetenayet Tola, Abebe Badie, Solomon Habtegabriel and Sirawdink Forsido

Utilisation of rheological models for describing the mechanical behaviour of oil palm empty fruit bunches under compression loading pp. 199-205

Tomáš Saller and David Herák

Development of microclimate in the New Holland T6.165 tractor pp. 206-210

Jan Hart and Veronika Hartová

Volume 69, issue 3, 2023

3D finite element analysis of tine cultivator and soil deformation pp. 107-117

Muhammad Hashaam, Muhammad Waqar Akram, Moaz Ahmad, Muhammad Zuhaib Akram, Muhammad Faheem, Muhammad Maqsood and Muhammad Aleem

Design and construction of coffee roasting machine with rounding cylinder tube using electric heat source pp. 118-123

Andriani Lubis, Syafriandi Syafriandi, Muhammad Idkham and Ari Maulana

Enhanced biodiesel production from waste cooking oils catalyzed by sodium hydroxide supported on heterogeneous co-catalyst of bentonite clay pp. 124-131

Darwin Darwin, Rini Ayu Marisa Harahap, Atmadian Pratama, Muhammad Thifa and Muhammad A Alwi Fayed

A novel hybrid feature method for weeds identification in the agriculture sector pp. 132-142

Sheeraz Arif Arif, Rashid Hussain, Nadia Mustaqim Ansari and Waseem Rauf

Study on drying of bitter gourd slices based on halogen dryer pp. 143-150

Dinh Anh Tuan Tran, Tuan Nguyen Van, Dinh Nhat Hoai Le and Thi Khanh Phuong Ho

Evaluation and modelling of biogas production from batch anaerobic digestion of corn stover with oxalic acid pp. 151-157

Shitophyta Lukhi Mulia, Arnita Arnita and Wulansari Hilda Dyah Ana

Volume 69, issue 2, 2023

Evaluation of low temperature drying characteristics of fresh tea leaves (Camellia assamica) in an environmental chamber using mathematical models pp. 55-64

Anindita Sharma and Partha Pratim Dutta

Comparison of the machine learning and AquaCrop models for quinoa crops pp. 65-75

Rossy Chumbe, Stefany Silva and Yvan Garcia

Contrasting tillage systems and vertical arable layer stratification impacts on soil aggregates and root biomass in Lithuania pp. 76-84

Inga Andruškaité and Vaclovas Bogužas

Field evaluation of a bent leg tillage implement in dry soil conditions pp. 85-93

Aliakbar Solhjou and Sayed Mansor Alavimanesh

The effect of large doses of organic fertilisers on maize pp. 94-100

Pavel Brož, Jaroslav Korba, Jitka Edrová, Josef Hůla and Petr Šařec

Influence of primary tillage on the displacement of soil particles pp. 101-106

Pavel Brož and Josef Hůla

Volume 69, issue 1, 2023

Thin layer drying characteristics of alligator pepper, ginger and turmeric pp. 1-8

Adebayo Olasunkanmi Salau, Babatunde Sunday Ogunsina, Adewale Waliu Adebayo and Adekunle Felix Okunade

Model development and optimisation of the disc plough efficiency on loamy-sand soil in South-East Nigeria pp. 9-17

Okechukwu Oduma, Precious Ehiomogue and Dilibe Ifanyi Ntunde

Influence of the excavator hydraulic system efficiency on the productivity pp. 18-27

Michal Jůza and Petr Heřmánek

Dielectric properties of materials for 3D printing at high frequencies pp. 28-35

Tomáš Pícha and Stanislava Papežová

Estimation of corn coefficients with vegetation indices using multispectral camera and drone pp. 36-47

Christos Dimitrios Papanikolaou and Maria Andreas Sakellariou-Makrantonaki

Development and evaluation of a low-cost evaporative cooling system for agricultural product storage pp. 48-53

Natesan Kapilan and Vijay Kumar Patil

Volume 68, issue 4, 2022

INDEX OF VOLUME 68 pp. I-II

Editors

Development and evaluation of a combined roaster expeller for castor seeds for biodiesel production pp. 169-179

Rasheed Amao Busari, Joshau Olarnrewaju Olaoye, Emmanuel Segun Adebayo and Adeshina Fadeyibi

Strength properties of the Bambara kernel (Vigna subterranean) as influenced by the moisture content and kernel size pp. 180-193

Nnaemeka R. Nwakuba, Osita C. Chukwuezie, Maxwell I. Chikwue, Chibuike Ononogbo, Cyprian Dirioha and Merlin Simo-Tagne

Evaluation of electrical resistance of electrodes with conductive ink for agriculture applications using computer technology pp. 194-200

Viktor Novák, Jaromír Volf, Daniel Novák, Václav Vrbík, Vladimír Ryženko and Ján Stebila

Engineering properties of the cashew nut in context of designing post-harvest handling and processing machinery pp. 201-209

Arie Sudaryanto, Dadang Dayat Hidayat, Diang Sagita, Ashri Indriati and Ari Rahayuningtyas

Viability of some African agricultural by-products as a feedstock for solid biofuel production pp. 210-215

Musa Bappah, Jiří Bradna, Jan Malaťák and Petr Vaculík

Prediction of the rhodinol content in Java citronella oil using NIR spectroscopy in the initial stage developing a spectral smart sensor system - Case report pp. 216-222

Dedi Wahyudi, Erliza Noor, Dwi Setyaningsih, Taufik Djatna and Irmansyah Irmansyah

Volume 68, issue 3, 2022

The effect of ethanol on potato growth and production at moderate elevation pp. 113-119

Andi Muhibuddin, Zulkifli Maulana, Suryawati Salam, Syamsia Syamsia, Reta Reta and Arifin Fattah

Drying kinetics and mathematical modelling of Arundo donax L. canes, a potential renewable fuel pp. 120-130

Verónica Córdoba, Alejandra Manzur and Estela Santalla

Models for feature selection and efficient crop yield prediction in the groundnut production pp. 131-141

Kuruguntu Mohan Krithika, Nachimuthu Maheswari and Manickam Sivagami

Monitoring the movement of housed animals by means of wireless technology pp. 142-149

Martin Olmr, Marek Pačes, Jan Lešetický and Miroslav Přikryl

Impacts of HHO gas utilisation on the operating parameters in internal combustion engines pp. 150-156

Petr Jindra and Martin Kotek

Inactivation of anti-nutrients in soybeans via micronisation pp. 157-167

Vladyslav Zubko, Svitlana Plavynska, Volodymyr Plavynskyi, Oleksandra Plavynska, Anatolii Saienko and Hynek Roubík

Volume 68, issue 2, 2022

Applications of pulsed electric fields for processing potatoes: Examples and equipment design pp. 47-62

Oleksii Parniakov, Nikolai Lebovka, Artur Wiktor, Martina Comiotto Alles, Kevin Hill and Stefan Toepfl

Processing of sugar beets assisted by pulsed electric fields pp. 63-79

Eugene Vorobiev and Nikolai Lebovka

Pulsed electric field treatment for the stimulation of microorganisms: Applications in food production pp. 80-92

Sally El Kantar and Mohamed Koubaa

Application of pulsed electric field prior to vacuum drying: Effect on drying time and quality of apple tissue pp. 93-101

Aleksandra Matys, Dorota Witrowa-Rajchert, Oleksii Parniakov and Artur Wiktor

Kitchen cooking by electroporation pp. 102-107

František Kumhála, Jakub Lev, Pavel Kouřím and Jiří Blahovec

Sensory evaluation test of electroporated carrots pp. 108-111

Pavel Kouřím, Lenka Kouřimská, Izabela Kovaříková and Jiří Blahovec

Volume 68, issue 1, 2022

Retroreflection of traffic signing for the safe operation of agricultural machinery pp. 1-8

Lukáš Jan Hrabánek and Miroslav Růžička

Non-linear control model for use in greenhouse climate control systems pp. 9-17

Jalal Javadi Moghaddam, Ghasem Zarei, Davood Momeni and Hamideh Faridi

A study on the mathematical model for predicting the peel removal efficiency of a cassava peeler pp. 18-26

Charles Olawale Ogunnigbo, Dare Aderibigbe Adetan and Tunde Afolabi Morakinyo

Pyrolysis of maize cob at different temperatures for biochar production: Proximate, ultimate and spectroscopic characterisation pp. 27-34

Timothy Adekanye, Oluwasogo Dada and Jegede Kolapo

Theoretical justification of the operating modes of periodic activity of vegetable oil purification pp. 35-40

Petr Igorevich Osadchuk, Dmitry Panasovich Domuschi, Yuriy Ivanovich Enakiev and Blagoj Elenov

Drawbar performance of a power tiller on a sandy loam soil of the Nadia district of West Bengal pp. 41-46

Sujit Hensh, Partha Sarathi Chattopadhyay and Khokan Das

Volume 67, issue 4, 2021

Using new computer based techniques to optimise energy consumption in agricultural land levelling pp. 149-163

Salim Almaliki and Nasim Monjezi

Effects of a manual harvesting device on the quality of the fermented green olives (cv. Manzanilla) pp. 164-170

Eddy Plasquy, Maria del Carmen Florido and Antonio Higinio Sánchez

Development of HTU-model variable chipping clearance cassava chipper pp. 171-180

Samuel Kojo Ahorsu, Hayford Ohori, Ernest Kumah, Maxwell Budu, Cephas Kwaku Bosrotsi and Joseph Aveyiri

Cost analysis of manual bund shaping in paddy fields: Economical and physiological pp. 181-189

Ritesh Ranjan and Prabhanjan Kumar Pranav

Testing tyres of mobile forest machines in the soil testing canal pp. 190-198

Milan Helexa, Ján Kováč and Jozef Krilek

Physical properties of a soil under a pig slurry application and organic matter activators pp. 199-207

Václav Novák, Petr Šařec and Kateřina Křížová

Volume 67, issue 3, 2021

A newly developed method based on surface physicochemical proprieties, for measuring the maturation level of olive fruit pp. 101-107

Soukaina Soufiani, Mohamed Bensalah, Hafida Zahir, Hajar Koubali, Mostafa El Louali and Hassan Latrache

Determination of the effects of tillage on the productivity of a sandy loam soil using soil productivity models pp. 108-115

Tanko Bako, Ezekiel Ambo Mamai and Akila Bardey Istifanus

Design, development and performance evaluation of small-scale fodder chopping machine for farmers pp. 116-122

Jannatul Ferdows Nipa, Md. Hasan Tarek Mondal and Md. Atikul Islam

Influence of the moisture content and speed on the cutting force and energy of tannia cormels pp. 123-130

Babatunde Olayinka Oyefeso, Akintunde Akintola, Monisola Grace Afolabi, Clement Adesoji Ogunlade, Oluwaseyi Kayode Fadele and Oluwaseye Micheal Odeniyi

The effects of three plasma-activated water generation systems on lettuce seed germination pp. 131-137

Rouzbeh Abbaszadeh, Pegah Khosravi Nia, Mahsa Fattahi and Hamidreza Ghomi Marzdashti

Characterisation of briquettes from forest wastes: Optimisation approach pp. 138-147

Oluwaseyi Kayode Fadele, Temiloluwa Ojuolape Amusan, Ademola Olagoke Afolabi and Clement Adesoji Ogunlade

Volume 67, issue 2, 2021

Development of a manually operated organic and inorganic fertiliser applicator for smallholder farmers pp. 51-57

Olayinka Omotosho, Adebayo Oke, Azarel Uthman, Adekunle Atta and Emmanuel Ezaka

Role of a corona field application in the physicochemical properties of stored strawberries pp. 58-64

Ali Esehaghbeygi, Arash Hajisadeghian and Masih Nasri Nasrabadi

Calculation model of the tractor transport set - Economic and environmental indicators pp. 65-73

Karel Kubín, Martin Pexa and Michal Holúbek

Thin layer mathematical modelling of white maize in a mobile solar-biomass hybrid dryer pp. 74-83

Joseph Oppong Akowuah, Ato Bart-Plange and Komla Agbeko Dzisi

Optimisation of concurrent Calophyllum oil-resin extraction and separation pp. 84-91

Ika Amalia Kartika, Muriel Cerny, Virginie Vandenbossche, Philippe Evon, Wega Trisunaryanti, Rino Rakhmata Mukti, Hartati, Nancy Dewi Yuliana and Illah Sailah

Influence of palm kernel variables on the yield and quality of oil expressed using an expeller pp. 92-99

Sunday Louis Ezeoha and Clement Onyeaghala Akubuo

Volume 67, issue 1, 2021

Effect of drying temperature in hop dryer on hop quality pp. 1-7

Adolf Rybka, Petr Heřmánek and Ivo Honzík

Energy and exergy analyses of okra drying process in a forced convection cabinet dryer pp. 8-16

Abiodun Okunola, Timothy Adekanye and Endurance Idahosa

Forces and loosening characteristics of a new winged chisel plough pp. 17-25

Mahmood Reza Salar, Seyed Hossein Karparvarfard, Mohammad Askari and Hoda Kargarpour

Moisture - Influenced friction properties of ackee apple (Blighia sapida) seeds pp. 26-33

Olajide Ayodele Sadiku and David Omogunsoye

A study on the influence of the loading rate and orientation on some mechanical properties of cassava tubers of different ages pp. 34-44

Olawale Ogunnigbo, Dare Adetan, Tunde Morakinyo, Olusola Olusunmade and Bolaji Ojerinde

Comparative analysis of the physical properties of two varieties of periwinkle relevant to the design of processing equipment pp. 45-50

Inemesit Edem Ekop, Kayode Joshua Simonyan and Udochukwu Nelson Onwuka