Research in Agricultural Engineering

2003 - 2025

Current editor(s): Bc. Michaela Polcarová

From Czech Academy of Agricultural Sciences
Bibliographic data for series maintained by Ivo Andrle ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Index of Volume 55 pp. I-III: Editors
Impact of semitrailer tyre pressure upon passive resistance and tractor unit operation economy pp. 129-135: P. Novák, T. Šmerda and J. Čupera
Relationship between the looseness of soil and the electric conductivity pp. 136-140: P. Rácz and Z. Szüle
A new method of cleaning solid surfaces contaminated with oils pp. 141-148: V. Řezníček, V. Dvořák, K. Kykalová, J. Severa, J. Mareček and J. Fryč
Effect of carbide size in hardfacing on abrasive wear pp. 149-158: R. Chotěborský, P. Hrabě, M. Müller, R. Válek, J. Savková and M. Jirka
Hydro-sorting of apricots based on some physical characteristics pp. 159-164: E Mirzaee, S Rafiee, A Keyhani, Z Emam-Djomeh and Kamran Kheiralipour
Determination of selected physical properties of Brachystegia eurycoma seeds pp. 165-169: M.C. Ndukwu

Effects of moisture content, loading rate, and grain orientation on fracture resistance of barley grain pp. 85-93: H. Tavakoli, S.S. Mohtasebi, A. Rajabipour and M. Tavakoli
Bearing capacity and corrosion weight losses of the bonded metal joints in the conditions of Indonesia, North Sumatra province pp. 94-100: D. Herák, M. Műller, J. Karanský, O. Dajbych and S. Simanjuntak
Effect of abrasive particle size on abrasive wear of hardfacing alloys pp. 101-113: R. Chotěborský, P. Hrabě, M. Müller, J. Savková, M. Jirka and M. Navrátilová
Determining of moisture diffusivity and activation energy in drying of apricots pp. 114-120: E. Mirzaee, S. Rafiee, A. Keyhani and Z. Emam-Djomeh
The effect of tractor supply in Iran agriculture from a macro plan point of view pp. 121-127: M. Ghadiryanfar, A. Keyhani, A. Akram and S. Rafiee

Influence of fan flat nozzles wear degree on drop tracks size pp. 39-44: M. Koszel
Effects of moisture content, internode position and loading rate on the bending characteristics of barley straw pp. 45-51: H. Tavakoli, S.S. Mohtasebi and A. Jafari
Physical properties of flax fibre for non-textile-use pp. 52-61: K.-H. Kromer
New mixtures and technologies for biogas production at biogas plants of agricultural type processing livestock slurry pp. 62-68: J. Kára, Z. Pastorek, J. Mazancová and I. Hanzlíková
The exposure of working environment noise in the agricultural service workplaces pp. 69-75: M. Šístková and A. Peterka
Loading capacity determination of the wooden scarf joint pp. 76-83: D. Herák, M. Müller, R. Chotěborský and O. Dajbych

Simulation mathematical model of expert system for working processes management pp. 1-9: O. Syrový and V. Podpěra
Influence of sweet corn harvest date on kernels quality pp. 10-17: M. Szymanek
Field experience with transmission oil EP Gear Synth 150 pp. 18-23: Z. Aleš
Acid catalysed transesterification of animal waste fat pp. 24-28: A. Prošková, Z. Kopicová, J. Kučera and L. Škarková
Degradation processes influencing bonded joins pp. 29-34: M. Müller, R. Chotěborský and P. Hrabě
Assessment of the current theory for projecting cableway routes in terms of the risk level in overloading pp. 35-38: V. Štollmann and Š. Ilčík

INDEX OF VOLUME 54 pp. I-III: Editors
Evaluation of thermooxidation stability of biodegradable recycled rapeseed-based oil NAPRO-HO 2003 pp. 163-169: M. Kučera and M. Rousek
Effect of heat treatment on re-solubility of potato proteins isolated from industrial potato fruit juice pp. 170-175: V. Bártová and J. Bárta
Relation between surface temperature and dryer operation pp. 176-182: I. Vitázek and J. Tirol
Testing stands for laboratory tests of hydrostatic pumps of agricultural machinery pp. 183-191: Z. Tkáč, Š. Drabant, R. Majdan and P. Cvíčela
Abrasive wear of high chromium Fe-Cr-C hardfacing alloys pp. 192-198: R. Chotěborský, P. Hrabě, M. Müller, J. Savková and M. Jirka
Influence of using time of selected agricultural machines and tractors on residual market price, repair costs, and annual utilisation pp. 199-207: J. Sailer, M. Kavka, P. Kavka and P. Kavka

Measurement of water infiltration in soil using the rain simulation method pp. 123-129: P. Kovaříček, R. Šindelář, J. Hůla and I. Honzík
The analysis of the relationship between the electrical conductivity values and the valued soil-ecological units values pp. 130-135: M. Mimra, M. Kroulík, V. Altmann, M. Kavka and V. Prošek
Research of correlation between electric soil conductivity and yield based on the use of GPS technology pp. 136-147: L. Ryšan and O. Šařec
Evaluation of the work quality of the sugar beet planter in relation to the sugar beet seed parameters pp. 148-154: P. Findura, L. Nozdrovický, P. Tóth and Ľ. Mrázová
Verification of applicability of ABB robots for trans-planting seedlings in greenhouses pp. 155-162: P. Hůla, R. Šindelář and A. Trinkl

80 years of Professor Radoš Řezníček pp. i: J. Blahovec
Influence of soil and tire parameters on traction pp. 43-49: M. Schreiber and H.D. Kutzbach
Airflow resistance of wheat bedding as influenced by the filling method pp. 50-57: J. Łukaszuk, M. Molenda, J. Horabik, B. Szot and M.D. Montross
Nitrogen conversion and nitrous oxide hot spots in energy crop cultivation pp. 58-67: H.J. Hellebrand, V. Scholz and J. Kern
A study on applications of intersecting flows in water reservoir for improvement of water environment problems pp. 68-79: S. Umeda and W.-J. Yang
Physical properties of cereal grain and rape stem pp. 80-90: S. Grundas and G. Skubisz
Mechanical properties of cereal stem pp. 91-96: J. Dunca
Influence of packing method on colour perception improving the appearance of fruits and vegetables pp. 97-103: B. Dobrzański and R. Rybczyński
Dielectric properties of agricultural products and some applications pp. 104-112: S.O. Nelson
Dielectric properties of deformed early potatoes pp. 113-122: J. Blahovec

The effect of the tractor engine rated power on diesel fuel consumption during material transport pp. 1-8: L. Jílek, R. Pražan, V. Podpěra and I. Gerndtová
By-products from methyl ester oil production and their thermal-emission properties pp. 9-21: J. Bradna and J. Malaťák
Measurement of potato tubers resistance against mechanical loading pp. 22-31: V. Mayer, D. Vejchar and L. Pastorková
Utilisation of the method of stress limit for designing the motion screw dimensions pp. 32-41: D. Herák, J. Karanský and R. Chotěborský