Research in Agricultural Engineering

2003 - 2025

Current editor(s): Bc. Michaela Polcarová

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Technology and economy of energy crops pp. 123-129: Z. Abrham, M. Kovářová and T. Kuncová
Exergy of heat flows of the air-to-air plate heat exchanger pp. 130-135: R. Adamovský, D. Adamovský and D. Herák
Heating briquettes from energy crops pp. 136-139: D. Plíštil, M. Brožek, J. Malaťák and P. Heneman
Evaluation of cattle and sheep buildings with their surroundings using 'visual quality assessment' technique pp. 140-151: T. Taşkin, A. Kaplan, A. Önenç and C. C Hepcan
Influence of heat treatment on mechanical properties of steel pp. 152-155: R. Chotěborský and M. Brožek
The spring of internal combustion engine valve mechanism pp. 156-159: J. Honců

Potato bruise spot sensitivity dependence on regimes of cultivation pp. 89-95: J. Blahovec and J. Židová
Application of smart sensors in the measurement of soil physical parameters pp. 96-102: W. Skierucha, A. M Wilczek and R. T Walczak
Research specificity and standardization of agrophysical methods on the example of investigations in soil physics pp. 103-106: A. Bieganowski, W. Skierucha and R.T. Walczak
Ethanol enriched biodiesel as a fuel for compression ignition engines pp. 107-111: M. Polák
The present time of transposition of the European environmental legislation into Czech food industry pp. 112-116: L. Macháčková and P. Heneman
N2O emission from mineral soils - Reviews pp. 117-122: T. Włodarczyk, J. Gliński and U. Kotowska

Research of biological agents effects on reduction of ammonia concentration in stables of intensive farm animals breeding pp. 43-53: A. Jelínek, M. Dědina, P. Plíva and J. Souček
Static and dynamic tests of pear bruise sensitivity pp. 54-60: J. Blahovec, V. Mareš and F. Paprštein
Change in humidity of solid biofuels pp. 61-65: P. Heneman
The effect of working conditions on the selected parameters of duckfoot shares pp. 66-74: M. Fríd, J. Šabatka and I. Celjak
Application of ductile iron in the manufacture of ploughshares pp. 75-80: R. Březina, J. Filípek and J. Šenberger
External factors and their impact on the metabolism and technological quality of stored sugar beet pp. 81-87: R. Rybář

Potential use of program Dynamic Designer in spring modelling pp. 1-5: V. Šleger
Direct shear testing of flowability of food powders pp. 6-10: M. Stasiak and M. Molenda
Influence of moisture content on pressure ratio of rape seeds pp. 11-14: R. Rusinek and J. Łukaszuk
Post-drying of energy sorrel in a grate stock pp. 15-22: P. Hutla and J. Mazancová
Possible use of vacuum controlled pulsators for sheep milking machines pp. 23-27: J. Fryč, R. Kukla and J. Los
Technical analysis of a back supply of heated rendering-plant fat the disc drier pp. 28-30: P. Krejzek, P. Heneman and J. Mareček
Comparison of the best available technique indicators for processing animal tissues pp. 31-33: J. Jalovecký and J. Mareček
Background information for the agricultural technology management program (Atmp) Agro-expert pp. 342-40: B. Havrland

Low frequency electric properties utilization in agriculture and food treatment pp. 125-136: Z. Hlaváčová
Evaluation of long term storage of apples by means of fractal analysis pp. 137-145: Ľ. Kubík, A. Pavelková, T. Hornyák, P. Kováč, V. Horčin and J. Fúsková
Thermo-technical properties of floor structures for lying cubicles pp. 146-150: J. Lendelová and Š. Pogran
Testing stand for life tests of hydrostatic pumps with a polluted fluid pp. 151-156: I. Petranský and M. Bolla
Thermophysical parameters of corn and wheat flour pp. 157-160: M. Božiková
Exploitation of the software product Pro/Mechanica in the agricultural research pp. 161-164: J. Bajla, Z. Balogh and M. Božik

Field capacity determination from GPS spatial data pp. 75-79: P. Kovaříček and J. Hůla
Research of sugar-beet tubers mechanical properties pp. 80-84: J. Skalický
Exploitational indicators, Diesel fuel consumption and work quality during disc tiller skimming pp. 85-90: J. Hůla, P. Kovaříček and V. Mayer
The outer quality loss during grain post-harvest treatment and handling pp. 91-102: P. Kroupa
Safety aspects for automatic guidance of agricultural machines and low-cost solutions pp. 103-109: U. Klee, L. Hofmann and P. Pickel
Comparison of the operation of milking machine control valves and a newly designed regulating device pp. 110-114: J. Fryč
Engine combustion chamber tightness diagnostics pp. 115-118: J. Pošta, B. Kadleček and T. Hladík
Ecological aspect of mobile systems operated in terrain conditions pp. 119-123: A. Janeček and M. Mikleš

Pressure in the hydraulic system of three point hitch of tractor equiped with electrical and mechanical control pp. 37-43: I. Petranský, Š. Drabant, J. Ďuďák, A. Žikla, I. Grman and J. Jablonický
Comparison of two possibilities for mowing machine material feed rate measurement under laboratory conditions pp. 44-49: F. Kumhála, J. Mašek and V. Prošek
Approximation of bruise spot volume in pears in plots against deformation parameters pp. 50-55: J. Blahovec and V. Mareš
Determination of elastic parameters of grain with oedometric and acoustic methods pp. 56-60: M. Stasiak
Experimental method for determination of the pressure distribution in granular solids pp. 61-64: R. Rusinek

Verification of continual measuring methodology of ammonia emissions in animal husbandry pp. 1-6: A. Jelínek and J. Pecen
A fine desintegration of plants suitable for composite biofuels production pp. 7-11: J. Souček, I. Hanzlíková and P. Hutla
Results of the development of biodegradable oils suitable for forest machines pp. 12-21: M. Rousek
Anticorrosive efficiency of preservants for farming machinery pp. 22-26: M. Augustin and M. Ščerbejová
Properties of threads created by thread inserts pp. 27-31: J. Pošta, P. Veselý and T. Hladík
Optimization of frameworks by means of fem use pp. 32-36: J. Gaduš