Research in Agricultural Engineering

2003 - 2025

Current editor(s): Bc. Michaela Polcarová

From Czech Academy of Agricultural Sciences
Bibliographic data for series maintained by Ivo Andrle ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

2015, volume 61, articles SpecialIssue

Mechanical properties of pellets in compression pp. S1-S8

Ľ. Kubík and V. Kažimírová

Experimental determination of lethal doses of heat in thermal weed control pp. S9-S12

M. Mojžiš, I. Vitázek, F. Varga and S. Lindák

Impact of construction and technological solution of dairy cows housing on production of ammonia and greenhouse gases in winter pp. S13-S20

I. Karandušovská, Š. Mihina and M. Bošanský

Analysis of residual biomass of liquid biofuels using gravimetric method and combustion heat pp. S21-S25

J. Chrastina, L. Staroňová, I. Vitázek and M. Pšenka

Assessment of risks in the field of safety, quality and environment in post-harvest line pp. S26-S36

M. Žitňák, K. Kollárová, M. Macák, M. Prístavková and M. Bošanský

Possibilities of improving the wheel tractor drive force transmission to soil pp. S37-S42

R. Abrahám, R. Majdan and R. Drlička

Quality control of aluminium melt in production process pp. S43-S47

M. Kotus, E. Jankajová and M. Petrík

Autonomous control of biaxial tracking photovoltaic system pp. S48-S52

M. Olejár, V. Cviklovič, D. Hrubý and O. Lukáč

Analysis of the loading process effect on the tribological node geometry change of agricultural machine pp. S53-S59

M. Kučera, V. Malý and M. Kučera

Degradation of animal malodour pp. S60-S66

I. Janoško and M. Čery

Influence of material solution of cover shells on stable daylight pp. S67-S73

M. Balková and D. Páleš

Monitoring the inner surface of teat cup liners made from different materials pp. S74-S78

R. Gálik, Š. Boďo and L. Staroňová

Recycling of Polyamide from Scrap Tyres as Polymeric Composites pp. S79-S83

M. Müller, J. Žarnovský and R. Drlička

2015, volume 61, articles 4

Influence of temperature on vacuum drying characteristics, functional properties and micro structure of Aloe vera (Aloe barbadensis Miller) gel pp. 141-149

R.K. Jha, P.K. Prabhakar, P.P. Srivastav and V.V. Rao

Thermal and physical properties modelling of terebinth fruit (Pistacia atlantica L.) under solar drying pp. 150-161

M. Kaveh, R. Amiri Chayjan and M. Esna-Ashari

Wear of disc mill hammer in wet grinding processes on groundnut cake for fish feed production pp. 162-169

O.B. Oduntan and B.O. Omitoyin

Pyrolysis of sandbox (Hura crepitans) shell: Effect of pyrolysis parameters on biochar yield pp. 170-176

F.A. Ola and S.O. Jekayinfa

Influence of loading speed on a change of parameters of adhesive bonds based on cyanoacrylates pp. 177-182

M. Müller

2015, volume 61, articles 3

Analysis of physical, mechanical and chemical properties of seeds and kernels of Jatropha curcas pp. 99-105

M. Müller, Š. Horníčková, P. Hrabě and J. Mařík

Off-grid photovoltaic system for illumination pp. 106-110

P. Kouřím, M. Libra and V. Poulek

Influence of the isolation method of the soapstockfatty component on its characteristics pp. 111-115

Y.I. Prokof'ev, T.N. Poyarkova, A.R. Bykov, A.S. Shestakov, V.A. Kuznetsov and O.G. Androsova

Evaluation of wheat stubble management practices in terms of the fuel consumption and field capacity pp. 116-121

S. Gürsoy, B. Kolay, Ö. Avşar and A. Sessiz

Impact of evaporative cooling preservation on the shelf life of fruits and vegetable in South Western Nigeria pp. 122-128

M.C. Ndukwu and S.I. Manuwa

Experimental research on phytomass suitable for production of biogas pp. 129-133

M. Pastorek, J. Kára and Z. Pastorek

Bonding of wood pp. 134-139

M. Brožek

2015, volume 61, articles 2

Mathematical and neural network modelling of terebinth fruit under fluidized bed drying pp. 55-65

M. Kaveh and R. Amiri Chayjan

Evaluation of selected properties of briquettes from recovered paper and board pp. 66-71

M. Brožek

Evaluation of techniques for ploughshare lifetime increase pp. 72-79

P. Hrabě, M. Müller and V. Hadač

Employment characteristics of tine cultivators at deeper soil loosening pp. 80-86

P. Šařec and O. Šařec

Characteristics of bladeless turbine pp. 87-91

L. Dlabal and M. Polák

Microparticle composites on the basis of scrap utilizable in the field of agricultural production pp. 92-97

P. Valášek and M. Brožek

2015, volume 61, articles 1

List of Reviewers 2014 pp. I

Editors

Comparison of oil press for jatropha oil - a review pp. 1-13

A.N. Siregar, J.A. Ghani, C.H.C. Haron, M. Rizal, Z. Yaakob and S.K. Kamarudin

Researches of liquid contaminants influence on change of hardness of agricultural tyre tread pp. 14-20

M. Müller and P. Novák

Hydrothermal carbonization of stabilized sludge and meat and bone meal pp. 21-28

J. Malaťák and T. Dlabaja

Coniform-shape tool for splitting of wooden logs pp. 29-34

F. Bodnár and M. Minárik

Effect of speed, die sizes and moisture contents on durability of cassava pellet in pelletizer pp. 35-39

O.B. Oduntan and O.A. Koya

Influence of two-body abrasion and heat intensity on metal and non-metal materials used in agriculture pp. 40-46

P. Valášek, J. Kejval, M. Müller and J. Cieslar

Geometric performance parameters of three-point hitch linkage system of a 2WD Indian tractor pp. 47-53

G.V. Prasanna Kumar

2014, volume 60, articles SpecialIssue

Effect of irrigation machines on soil compaction pp. S1-S8

J. Jobbágy, P. Findura and F. Janík

Elimination of ecological fluids contamination in agricultural tractors pp. S9-S15

R. Majdan, Z. Tkáč, B. Stančík, R. Abrahám, I. Štulajter, P. Ševčík and M. Rášo

Assessment of risks in implementing automated satellite navigation systems pp. S16-S24

M. Žitňák, M. Macák and M. Korenko

Research of journal bearings for using in agricultural mobile machines pp. S25-S30

M. Kadnár, J. Rusnák, M. Bujna, J. Valíček, M. Kušnerová and P. Tököly

Fuzzy control of temperature and humidity microclimate in closed areas for poultry breeding pp. S31-S36

M. Olejár, V. Cviklovič, D. Hrubý and L. Tóth

Performance parameters monitoring of the hydraulic system with bio-oil pp. S37-S43

I. Janoško, T. Polonec and S. Lindák

Determining the management zones with hierarchic and non-hierarchic clustering methods pp. S44-S51

J. Galambošová, V. Rataj, R. Prokeinová and J. Prešinská

Sorption isotherms of agricultural products pp. S52-S56

I. Vitázek and J. Havelka

Monitoring of conditions of agricultural machines' parts in operation pp. S57-S65

P. Polák, R. Mikuš and V. Kročko

Determination of mechanical properties of soil under laboratory conditions pp. S66-S69

V. Malý and M. Kučera

Machinability improvement using high-pressure cooling in turning pp. S70-S76

R. Drlička, V. Kročko and M. Matúš

Design of active stability control system of agricultural off-road vehicles pp. S77-S84

J. Rédl, V. Váliková and J. Antl

The effect of evaporative cooling on climatic parameters in a stable for sows pp. S85-S91

Ľ. Botto, J. Lendelová, A. Strmeňová and T. Reichstädterová

Technical exploitation parameters of grinding rolls work in flour mill pp. S92-S97

R. Opáth

Verification of the working life of a ploughshare renovated by surfacing and remelting in the operation pp. S98-S103

I. Kováč, N. Vanko and M. Vysočanská

2014, volume 60, articles 4

INDEX OF VOLUME 60 pp. I-II

Editors

Monitoring the impact of tyre inflation pressure on tensile properties of forest tractors pp. 127-133

M. Helexa

Investigating operator vibration exposure time of 13 hp power tiller fuelled by diesel and biodiesel blends pp. 134-141

B. Heidary, S.R. Hassan-Beygi and B. Ghobadian

Study of fuel consumption in three tillage methods pp. 142-147

A. Akbarnia and F. Farhani

Design, fabrication and testing of a cassava pelletizer pp. 148-154

O.B. Oduntan, O.A. Koya and M.O. Faborode

Moulds occurrence in woodchips pp. 155-158

J. Souček

Design of sustainable olive mill wastewaters ponds pp. 159-164

F. Barreca and C.R. Fichera

Epoxy resin filled with primary and secondary raw material - useable in agriculture pp. 165-171

P. Valášek, J. Kejval and M. Müller

Determination of oxygen permeability and mechanical properties of the aluminium paper foils pp. 172-179

Ľ. Kubík and S. Zeman

2014, volume 60, articles 3

Improving performance parameters of combustion engine for racing purposes pp. 83-91

T. Polonec and I. Janoško

Dehydration kinetics of onion slices in osmotic and air convective drying process pp. 92-99

V.A. Revaskar, P.S. Pisalkar, P.B. Pathare and G.P. Sharma

Goose eggshell geometry pp. 100-106

Š. Nedomová and J. Buchar

Development and evaluation of full-vehicle vibration model of MF 285 tractor pp. 107-114

I. Ahmadi

Effect of microstructure factors on abrasion resistance of high-strength steels pp. 115-120

E. Zdravecká, J. Tkáčová and M. Ondáč

Analyses of the thermal characteristics of construction details at the biogas station plant pp. 121-126

P. Junga and P. Trávníček

2014, volume 60, articles 2

Technical possibilities of the cutting oils filtration residues combustion pp. 45-49

M. Pešek and M. Přikryl

Use of waste material mixtures for energy purposes in small combustion devices pp. 50-59

J. Malaťák and J. Bradna

Evaluation of the influence of fermentation input substrates preparation on biogas production intensity pp. 60-67

D. Sochr, R. Adamovský, J. Kára and I. Hanzlíková

Deformation energy of Jatropha curcas L. seeds under compression loading pp. 68-74

A. Kabutey, D. Herák, O. Dajbych, M. Divišová, W.E. Boatri and R. Sigalingging

Moisture-dependent physical properties of kokum seed (Garcinia indica Choisy) pp. 75-82

S.P. Sonawane, G.P. Sharma, N.J. Thakor and R.C. Verma

2014, volume 60, articles 1

Effect of rapeseed methyl ester on emission production pp. 1-9

M. Pexa and K. Kubín

Analysis of using brewery mash for energy pp. 10-16

Z Konrád, J Los, J Fryč and J Kudělka

Decomposition of the biodiesel by-product, crude glycerol, in soil pp. 17-23

P. Dalias and P. Polycarpou

Impact of the size of nitrogen fertiliser application rate on N2O flux pp. 24-29

T. Šima, L. Nozdrovický, K. Krištof and J. Krupička

Effect of moisture content on some engineering properties of mahogany (Khaya senegalensis) seed and kernel pp. 30-36

N.A. Aviara, A.A. Lawal, H.M. Mshelia and D. Musa

Environmental degradation aspects influencing coach-working one-component epoxy adhesives pp. 37-43

M. Müller and P. Valášek