International Journal of Industrial and Systems Engineering

2006 - 2025

From Inderscience Enterprises Ltd
Bibliographic data for series maintained by Sarah Parker ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 12, issue 4, 2012

Objectives and constraints in advanced planning problems with regard to scale of production output and plan hierarchical level pp. 369-393

Yuri Mauergauz

A comparative study for optimum short-term forecasting of electricity price with uncertainty pp. 394-428

Ali Azadeh, Babak H. Tabrizi and Vahid Ebrahimipour

Enterprise and simulation modelling in enterprise architecture execution pp. 429-448

Zihua Cui and Richard H. Weston

An empirical study on the determination of price, warranty length and production rate in the dynamic sales market pp. 449-469

Chin-Chun Wu, Chao-Yu Chou, Chikong Huang and Yu-Chang Lin

Developing a new cross-efficiency model with undesirable outputs for supplier selection pp. 470-484

Kamyar Hosseinzadeh Zoroufchi, Majid Azadi and Reza Farzipoor Saen

Volume 12, issue 3, 2012

A Monte Carlo simulation to estimate TAGV production time in a stochastic flexible automated manufacturing system: a case study pp. 243-258

Hamed Fazlollahtabar, Alireza Es'haghzadeh, Hamed Hajmohammadi and Ali Taheri-Ahangar

Application of hybrid GA-SA heuristics for single-job production-delivery scheduling problem with inventory and due date considerations pp. 259-279

Ke-Jun Zhu and De-Yun Wang

A multi-objective integrated cellular manufacturing systems design with production planning, worker assignment and dynamic system reconfiguration pp. 280-300

Majid Soolaki

Prediction of surface roughness during wire electrical discharge machining of SiC p /6061 Al metal matrix composite pp. 301-315

Pragya Shandilya, P.K. Jain and N.K. Jain

Chi-squared control chart for multiple attributes pp. 316-330

Salah Haridy, Zhang Wu and John Flaig

Multiple objective optimisation of submerged arc weld process parameters using grey-based Taguchi method pp. 331-345

J. Edwin Raja Dhas and M. Satheesh

Optimal pipe diameter sizing in a tree-structured gas network: a case study pp. 346-368

Amir Mohajeri, Iraj Mahdavi and Nezam Mahdavi-Amiri

Volume 12, issue 2, 2012

A primal-dual method for solving linear programming problems with fuzzy cost coefficients based on linear ranking functions and its applications pp. 119-140

Ali Ebrahimnejad

Modelling and optimisation of electro-discharge diamond face grinding of cemented carbide-cobalt composite pp. 141-164

Gyanendra Kumar Singh, Vinod Yadava and Raghuvir Kumar

A multi-state degraded system with inspection and maintainability pp. 165-187

Madhu Jain and Preeti Naresh

Modelling and characteristic analysis for elastic modulus of giant magnetostrictive material under stress and magnetic field pp. 188-206

Hui-Fang Liu, Zhen-Yuan Jia, Fu-Ji Wang and Fu-Cai Zong

A heuristic method for solving reverse logistics vehicle routing problems with time windows pp. 207-222

Sally Kassem and Mingyuan Chen

A framework for selection of logistics outsourcing partner in uncertain environment using TOPSIS pp. 223-242

Rajesh Gupta, Anish Sachdeva and Arvind Bhardwaj

Volume 12, issue 1, 2012

Quality modelling and analysis of a mechatronic system pp. 1-28

C. Phaneendra Kiran, Shibu Clement and V.P. Agrawal

Financial analysis of integrated biodiesel industry in Indonesia pp. 29-41

Akhmad Hidayatno, Yuri M. Zagloel, Widodo W. Purwanto and Aziiz Sutrisno

Concepts and measurements of industrial complexity: a state-of-the-art survey pp. 42-83

Ibrahim H. Garbie

A novel approach for obtaining initial basic solution of transportation problem pp. 84-99

Farzad Pargar, Adel Pourramzan Ganji and Hannaneh Rashidi Bajgan

An integrated mathematical model to optimise expected profit in e-markets using web catalogues pp. 100-118

Narges Yousefpoor and Laya Olfat

Volume 11, issue 4, 2012

A mathematical model for design problem of hydraulic valve product pp. 331-349

Jian-Wei Ma, Fu-Ji Wang and Zhen-Yuan Jia

Modelling the factors affecting flexibility in FMS pp. 350-374

Tilak Raj, Rajesh Attri and Vineet Jain

Quality monitoring and process adjustment by integrating SPC and APC: a review pp. 375-405

Muneeb A. Akram, Abdul-Wahid A. Saif and M. Abdur Rahim

Evaluation of parametric models in predicting the machining performance pp. 406-427

M. Anthony Xavior and M. Adithan

A multi-tool integrated methodology for distributed resource allocation in healthcare pp. 428-452

Shao-Jen Weng, Teresa Wu, Gerald T. Mackulak and William A. Verdini

Volume 11, issue 3, 2012

An integrated genetic algorithm-conventional regression-analysis of variance for improvement of gasoline demand estimation pp. 205-224

Ali Azadeh, Maryam Mirjalili, Mohammad Sheikhalishahi and Shima Nassiri

Performance evaluation and analysis of a JIT-Kanban production system with sampling inspection pp. 225-249

Mohammad D. Al-Tahat, Abbas Al-Refaie and Abdullah F. Al-Dwairi

Solving multi-response optimisation problems with enhanced precision pp. 250-278

Paul L. Goethals and Byung Rae Cho

Design for complexity: a global perspective through industrial enterprises analyst and designer pp. 279-307

Ibrahim H. Garbie

Flexibility in supply chain using coordination: issues and learnings pp. 308-330

Arshinder

Volume 11, issue 1/2, 2012

Selection of industrial robots using compromise ranking method pp. 3-15

Vijay Manikrao Athawale, Prasenjit Chatterjee and Shankar Chakraborty

Decision making for facility location selection using PROMETHEE II method pp. 16-30

Vijay Manikrao Athawale, Prasenjit Chatterjee and Shankar Chakraborty

Productivity improvement through balancing process using multi-skilled manpower in apparel industries pp. 31-47

Rezaul Hasan Shumon, Kazi Arif-Uz-Zaman and Azizur Rahman

An industrial application of DMECA approach to management process analysis pp. 48-65

Azizur Rahman and Md. Kutub Uddin

Developing a model for preventive maintenance management system and application database software pp. 66-80

Abul Mukid Mohammad Mukaddes, Nazi Faisal Ahmed Chowdhury and Md. Moin Uddin

Modelling, simulation and feasibility analysis of bus rapid transit system in Pune, India pp. 81-96

Ananth Rangarajan

The application of quality function deployment to improve the teaching techniques in higher education pp. 97-109

Abul Mukid Mohammad Mukaddes, Nasima Bagum, Md. Anisul Islam and Mohammad Muhshin Aziz Khan

A new hybrid algorithm for multi-depot vehicle routing problem with time windows and split delivery pp. 110-121

U.S.S. Dharmapriya, S.B. Siyambalapitiya and A.K. Kulatunga

Implementation of total quality management in Bangladesh power generating sector: progress and problems pp. 122-136

Azizur Rahman, Md. Kutub Uddin, Kazi Arif-Uz-Zaman and Md. Rezaul Hasan Shumon

A Bayesian approach to forecast intermittent demand for seasonal products pp. 137-153

Mohammad Anwar Rahman and Bhaba R. Sarker

Deriving the cost function of an integrated dyadic supply chain with uncertainty in the supply pp. 154-166

S. Mehdi Sajadifar and Behrooz Pourghannad

Pricing model for eliminating productivity concerns of outsourced software maintenance services pp. 167-178

Jagadish Kundu and Abhik Mukherjee

Kanban supplier system as a standardisation method and WIP reduction pp. 179-188

Ahad Ali, Neriliz Santini and Mohammad Anwar Rahman

Effects of degraded operation modes on reliability and performance of manufacturing cells pp. 189-204

Mehmet Savsar

Volume 10, issue 4, 2012

System dynamics as a useful technique for complex systems pp. 377-410

Ahmad Taher Azar

Modelling and simulation of a novel giant magnetostrictive force sensor pp. 411-429

Hui-Fang Liu, Fu-Ji Wang, Zhen-Yuan Jia and Fu-Cai Zong

Extended warranty policies with varying objectives pp. 430-450

Vahidhossein Khiabani and Alagar Rangan

A single machine-based scheduling optimisation model integrated with preventive maintenance policy for maximising the availability pp. 451-469

Ershun Pan, Wenzhu Liao and Lifeng Xi

Risk management in complex changeovers through CFMEA: an empirical investigation pp. 470-494

Bikram Jit Singh and Dinesh Khanduja

Volume 10, issue 3, 2012

A planning optimisation framework for construction and demolition waste management pp. 257-276

Anastasios Xanthopoulos, Dimitrios Aidonis, Dimitrios Vlachos and Eleftherios Iakovou

Optimal retailer's ordering policies under two-stage partial trade credit financing in a supply chain pp. 277-299

Chandra K. Jaggi, K.K. Aggarwal and Mona Verma

Multi-party multi-period supply chain coordination pp. 300-318

Thin-Yin Leong and Michelle L.F. Cheong

The dynamic demand game: a Markov state fictitious play approach to a two-echelon supply chain problem under demand uncertainty pp. 319-335

Diana G. Ramírez;, Julio Mario Daza-Escorcia, Javier Visbal Martinez, Carlos D. Paternina-Arboleda and Alfredo Garcia

Servitisation strategies and sourcing decisions for product services: an exploratory study pp. 336-354

Nicola Saccani

Maintenance policy selection: a review towards building proper selection model pp. 355-375

Ding Siew Hong, Shahrul Kamaruddin and Ishak Abdul Azid

Volume 10, issue 2, 2012

An approach to dynamic analysis of multidimensional quality characteristics in automobile body-in-white assembly pp. 135-152

Yinzhong Jiang and Kai Yang

Evaluation of a low-cost ergonomically designed adjustable assembly workstation pp. 153-166

Ashraf A. Shikdar and Mohamed A. Al-Hadhrami

Supplier selection using chance-constrained data envelopment analysis with non-discretionary factors and stochastic data pp. 167-196

Majid Azadi, Reza Farzipoor Saen and Madjid Tavana

Production capabilities using takt times, requirements analysis and simulation pp. 197-216

Jun Duanmu and Kevin Taaffe

A framework for applying real options analysis to information technology investments pp. 217-237

Chris Wang-Ngai Chan, Chun-Hung Cheng, Angappa Gunasekaran and Kam-Fai Wong

Metaheuristic in facility layout problems: current trend and future direction pp. 238-253

Anirban Kundu and Pranab K. Dan

Volume 10, issue 1, 2012

Efficiency measurement in fuzzy additive data envelopment analysis pp. 1-20

Adel Hatami-Marbini, Madjid Tavana, Ali Emrouznejad and Saber Saati

Integrated models in production planning and scheduling, maintenance and quality: a review pp. 21-50

Laith A. Hadidi, Umar M. Al-Turki and Abdur Rahim

Power Weibull system for business management pp. 51-71

V. Mariappan, G.G. Usgaonkar, V.B. Kamat and S. Michael

Initiative mapping methodology for system-of-systems applications pp. 75-95

Shannon R. Bowling, Ghaith Rabadi, Mahmoud T. Khasawneh, Nevan E.N. Shearer and Jun Zhang

Impact of manufacturing flexibility on FMS performance: a simulation study pp. 96-116

Ajay Singholi, Mohammed Ali and Chitra Sharma

Launching an existing product to a new demographic area: strategic plans and system reconfiguration pp. 117-133

Kazi Badrul Ahsan and Mohammad Marufuzzaman