International Journal of Industrial and Systems Engineering

2006 - 2025

From Inderscience Enterprises Ltd
Bibliographic data for series maintained by Sarah Parker ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 48, issue 3, 2024

Evaluating impacts of anchorages re-provisioning scheme on mega port operations: simulation approach pp. 301-320

Youhong Liao, Sifan Tu and Yongzhong Wu

Failure function matrix for interconnected equipment failure analysis pp. 321-337

Niguss Haregot Hatsey and Amanuel Amare Gebrekidan

Electric two-wheelers: the future of short hauls pp. 338-349

Samarth Singh

Resilience optimisation of contact centre during emergencies pp. 350-376

Junxiang Li, Xiaran Gao and Xinping Shao

System dynamics costing model for the capital cost estimation of electric vehicle batteries refurbishing facility pp. 377-404

Muhammad Ahmed Kalwar, Asif Nawaz Wassan, Waleed Ahmed Sheikh, Muhammad Ali Khan and Hussain Bux Mari

Design and experimental validation of normal terminal sliding mode control for level tank system pp. 405-418

Ajit R. Laware, Sanjay B. Joshi, Vitthal S. Bandal and Dhananjay B. Talange

Impacts of logistics models and freight subsidy on the possibility of consumers using cross-border e-commerce platform pp. 419-439

Yongzhong Wu, Zhijie Zhu and Yan Li

Volume 48, issue 2, 2024

Identifying the implementation of neural network approaches in peer-to-peer lending research: a bibliometric-based thematic approach pp. 153-179

Alok Kumar Sharma, Li-Hua Li, Bhartrihari Pandiya and Ashish Dwivedi

Decentralised control of heterogeneous interconnected systems with asynchronous sampling pp. 180-197

Shiqiang Zhang, Zidong Liu and Dongya Zhao

Determinants of blockchain-machine learning adoption in additive manufacturing pp. 198-227

Swati V. Narwane, Irfan Siddavatam and Mahesh S. Kavre

Six Sigma methodology implementation for minimising yarn breakages in the apparel industry pp. 228-258

Seleman Kalinga Hussein and Ismail W.R. Taifa

A logistics planning model for dual tank-containers combined-transport network pp. 259-275

Ruyi Fan and Junmin Yi

An empirical analysis of forecasting methods for trauma injuries in rural areas - a case study pp. 276-300

Alakshendra Joshi, Eduardo Pérez and Francis A. Méndez-Mediavilla

Volume 48, issue 1, 2024

Advanced delay-time analysis applied to carbon black powder production pp. 1-21

Marc Fischer and Bryan Jones

Reliability assessment of dragline's subsystem using dynamic Bayesian network pp. 22-36

Deepak Kumar, Debasis Jana, Suprakash Gupta and Pawan Kumar Yadav

Quality assurance using accelerated life testing via rebate warranty pp. 37-51

Showkat Ahmad Lone, Intekhab Alam, Sabir Ali Siddiqui and Ritu Rathee

Value chain analysis of biodiesel production from animal fat: a case of Botswana pp. 52-82

Nosi Keorapetse Patric Moakofi, Jerekias Gandure and Venkata Parasuram Kommula

Decentralised sliding mode control for a class of nonlinear interconnected systems with unstable internal dynamic pp. 83-99

Kai Sun, Jiehua Feng and Dongya Zhao

Unreliable queue model with multi-phases of services, delay repair and single vacation pp. 100-124

Binay Kumar

A forecast model for workers' performance in mass customised production pp. 125-152

Song Thanh Quynh Le, June Ho and Thi Kim Hue Trinh

Volume 47, issue 5, 2024

Conditions for viable horizontal collaborative transport: insights from a stylised model pp. 1-35

Taher Ahmadi, Jack A.A. van der Veen, V. Venugopal and Mehdi A. Kamran

Volume 47, issue 4, 2024

Lean practices: assessing the relationship among manufacturing and service firms pp. 421-451

Boppana V. Chowdary and Stefan Harrison

An empirical investigation of lean manufacturing dimensions through structural equation modelling pp. 452-474

Amjad Khalili

Product to process: an ontology-based approach for product manufacturing process in flexible manufacturing system pp. 475-494

Imane Zahri, Mohamed Rhazzaf, Souhail Sekkat and Mohammed Douimi

Elaboration of water distribution schedules in periods of scarcity pp. 495-517

Tatiana Balbi Fraga, Aldênia Karla Barrêto Candido, Marcos Luiz Henrique and Abdeladhim Tahimi

Just-in-time and supply chain finance: a hierarchal model development pp. 518-556

Syed Imran Zaman, Md. Ramjan Ali and Sharfuddin Ahmed Khan

Volume 47, issue 3, 2024

In-house part supply logistics optimisation based on the workforce's ergonomic strain and environmental considerations pp. 271-310

Parames Chutima and Chayanee Prakong

Multi-objective collaborative slot secondary allocation model with curfew restriction pp. 311-333

Kejia Chen, Xiaoqing Guo and Haiyan Wang

Ergonomic assessment for work-related musculoskeletal disorders: a case study on office workers in two government organisations in the United Arab Emirates pp. 334-353

In-Ju Kim

Integrating non-cyclical preventive maintenance scheduling and production planning for a series-parallel production line with stochastic dependence pp. 354-381

Ziyad Bahou, Issam Krimi, Abdessamad Ait El Cadi and Nizar El Hachemi

Optimisation of reactive precipitation for processing reject brine in ammonium perchlorate manufacture pp. 382-403

A. Ramachandra Rao, P.S. Tide, Benny K. George, A.R. Ajith Prasad and Jojo Mathew

Experimental modelling and multi-objective optimisation of electrochemical discharge peripheral surface grinding process during machining of alumina epoxy nanocomposites pp. 404-420

Nandani Singh, Vinod Yadava and Pragya Shandilya

Volume 47, issue 2, 2024

Contract design and order decision of online retailer's sharing surplus demand with offline retailer pp. 143-159

Jianjun Yu, Liqian Wang, Yongwu Zhou and Hongkai Fang

Implementation of internet of things in micro, small, and medium enterprises: a case study pp. 160-175

Parikshit Dinesh Sarulkar, S. Kumar, Anish Kumar and Vineet Kumar Yadav

Dynamic futures margin setting method under state dependence pp. 176-193

Wang Hong, Wen Kun and Shouqian Kang

Efficient Bayesian optimisation of bounded general loss function for robust parameter design pp. 194-215

Ying Chen and Mei Han

Integration of modified FMEA approach with Industry 4.0 technologies to improve reliability of lean systems pp. 216-236

Subburaman Karthik and Balaji Kuppusamy

Profit analysis of utensils manufacturing system of steel industry pp. 237-270

Sapna Saini, Jitender Kumar and M.S. Kadyan

Volume 47, issue 1, 2024

A revenue-based decision-making approach for evaluating modular product release plans under resource constraints pp. 1-19

Adewole Adegbola and Venkat Allada

A multi-objective optimisation for green supply chain network design problem considering economic and environmental sustainability pp. 20-45

Sreyneath Chhun, Saowanit Lekhavat and Mohammad Alghababsheh

Development of a face shield concept to protect against COVID-19 infection using integrated CAD and CAE tools and sustainable design techniques: deployment of international standards pp. 46-83

Nasser Ramsawak and Boppana V. Chowdary

Lean manufacturing implementation in the food industry in Jordan pp. 84-97

Lubna A. Baqleh, Hala AlSliti, Mohammed Said Obeidat and Samir Khrais

Development of a prescription framework for supply chain risk management: cases of Asian MNCs pp. 98-124

Jae-Yong Yang, Geun-Wan Park, Kwangtae Park and Rajesh Piplani

Ergonomics intervention with DMAIC methodology application - a case study in the food manufacturing industry pp. 125-141

Nur Nadia Nadirah Yusuf, Shaliza Azreen Mustafa and Rosmaini Ahmad

Volume 46, issue 4, 2024

Comparative study of risk management in new product development pp. 433-456

Mahmoud Awad and Yassir Shanshal

Active stabilisation of seaports co-evolution system for port throughput with time delay pp. 457-474

Xiao Xu, Hwan-Seong Kim, Truong Ngoc Cuong and Sam-Sang You

Modified ant colony algorithm for job shop scheduling problem pp. 475-508

Ye Li, Ning Wang and Kun Xu

Rub-impact fault identification based on EMD and stochastic resonance pp. 509-530

Mingyue Yu, Jinghan Zhang and Liqiu Liu

A framework for optimal patch release time using G-DEMATEL and multi-attribute utility theory pp. 531-555

Misbah Anjum, A.H.S. Garmabaki, P.K. Kapur, Sunil Kumar Khatri and Vernika Agarwal

A quantitative analysis of simultaneous supply and demand disruptions on a multi-echelon supply chain pp. 556-583

Austin R. Kost, Hector A. Vergara and J. David Porter

Volume 46, issue 3, 2024

Exploring the manufacturing flexibility issues to build a framework to implement the manufacturing flexibility of a supply chain: a review pp. 295-322

Chowdhury Jony Moin, Mohammad Iqbal, A.B.M. Abdul Malek and Mohammad Muhshin Aziz Khan

Seru scheduling problems with learning effect and job deterioration during an increasing adjustment period pp. 323-354

Ru Zhang, Zhe Zhang, Xiaoling Song, Xiaofang Zhong and Yong Yin

Optimal pricing decisions in a two echelon green/non-green resilient supply chain for substitute and complementary products considering disruption risk pp. 355-389

Ashkan Mohsenzadeh Ledari and Alireza Arshadi Khamseh

Machine learning for optimisation of flow-rack AS/RS performances pp. 390-403

Zakarya Amara, Latefa Ghomri and Ali Rimouche

Analytical hierarchy process-based maintenance quality function deployment integrating total quality management with total productive maintenance and its application in dairy industry pp. 404-432

Jeffin Johnson, V.K. Pramod and V.R. Pramod

Volume 46, issue 2, 2024

Research on the design of smart sleep aid interactive products pp. 151-168

Shan Hu, Liyan Zhang, Weiqi Guo, Dong Zhang, Qi Jia, Zitong Yang and Min Guo

A semi-Markov decision model for the optimal control of an emergency medical service system pp. 169-194

Giannis A. Kechagias, Alexandros C. Diamantidis and Theodosis D. Dimitrakos

An optimisation-based system for the university course timetabling: a novel integer linear programming model pp. 195-214

Olfa Harrabi, Jouhaina Chaouachi Siala and Mehdi Mrad

Assessing process time estimation for job sequencing in moving mixed-model assembly lines pp. 215-237

Faisal S. Alfaiz, David S. Kim and Hector A. Vergara

New order-picking routing heuristics for single block rectangular warehouse pp. 238-258

Hala Ahmed, Mahassen Khater and Raafat Elshaer

Improving forecast accuracy for seasonal products in FMCG industry: integration of SARIMA and regression model pp. 259-279

Deepak Bartwal, Rohit Sindhwani and Omkarprasad S. Vaidya

Median and interquartile range control charts based on quantiles of Marshall-Olkin inverse log-logistic distribution pp. 280-293

Olubisi L. Aako, Johnson A. Adewara and Kayode S. Adekeye

Volume 46, issue 1, 2024

Toward smart manufacturing systems incorporating reconfiguration issues pp. 1-33

Ibrahim H. Garbie and Abdelrahman I. Garbie

Investment efficiency evaluation of electric power substation projects by stages using the EWM-DEA model pp. 34-57

Xu Ma and Zhenyu Zhao

A VNS-IG algorithm for dynamic seru scheduling problem with sequence-dependent setup time and resource constraints pp. 58-89

Yiran Xiang, Zhe Zhang, Xue Gong and Yong Yin

Application of cognitive work analysis in support of systems engineering of a socio-technical system pp. 90-106

Henk van den Heever and Rudolph Oosthuizen

A robust non-singular fast terminal sliding mode controller for optimising a wind energy process pp. 107-125

Karim Dahech, Moez Allouche and Tarak Damak

NBSOC framework for team structure to develop blockchain-based applications pp. 126-149

Nitish Joshi, Tejaswi Khanna, Vikram Bali and Shivani Bali