International Journal of Industrial and Systems Engineering

2006 - 2025

From Inderscience Enterprises Ltd
Bibliographic data for series maintained by Sarah Parker ().

Access Statistics for this journal.
Is something missing from the series or not right? See the RePEc data check for the archive and series.

Volume 21, issue 4, 2015

Application of association rule algorithm to industrial safety data mining pp. 415-437

Jirachai Buddhakulsomsiri, Warut Pannakkong and Suebsak Nanthavanij

Design of a self-tuning double EWMA controller for MIMO processes pp. 438-457

Ming-Shan Lu and Shi Jer Wang

Project time and cost estimate at completion based on non-parametric resampling with interval risk pp. 458-473

Afshin Kamyabniya, Seyed Mohammad Seyedhoseini and Saied Yaghoubi

Effect of sequencing flexibility on the performance of flexibility enabled manufacturing system pp. 474-498

Wasif Ullah Khan and Mohammed Ali

Scheduling methodologies for a flexible manufacturing cell with non-identical parallel machines and a robot pp. 499-514

Majid M. Aldaihani

H ∞ nonlinear PID controller tuning based on simple constrained particle swarm optimisation pp. 515-533

Rochdi Bachir Bouiadjra and Mohamed Fayçal Khelfi

A new mathematical model for scheduling flexible flow shop problem with learning and forgetting effects of workers pp. 534-549

Hany Seidgar, Mehdi Abedi and Sahar Tadayoni Rad

Volume 21, issue 3, 2015

Assessment of qualitative factors affecting uncertainty measurement using AHP pp. 277-301

Nitin K. Mandavgade, S.B. Jaju and R.R. Lakhe

A stochastic programming model for hub-and-spoke network with uncertain flows pp. 302-319

Qing-Mi Hu and Zhi-Hua Hu

Efficient mixed integer programming formulations and dispatching rules for parallel machine scheduling with allowing machine idle times pp. 320-333

Chi-Yang Tsai and Yi-Chen Wang

A column generation approach for scheduling a batch processing machine with makespan objective pp. 334-355

Nicholas Wiechman and Purushothaman Damodaran

Prioritising (ranking) of indexes for measuring intellectual capital using FAHP and fuzzy TOPSIS techniques pp. 356-376

Abolfazl Rohani, Elham Keshavarz and Arezu Keshavarz

Group scheduling in hybrid flexible flowshop with sequence-dependent setup times and random breakdowns via integrating genetic algorithm and simulation pp. 377-394

M. Zandieh and A.R. Hashemi

Multi-state system importance analysis method of fuzzy Bayesian networks pp. 395-414

Rui-Jun Zhang, Lu-Lu Zhang and Ming-Xiao Dong

Volume 21, issue 2, 2015

Influence factors and rule of flow pulsation of accelerating pump in hydraulic type wind power generation system pp. 141-153

Cuntang Wang, Xianjun Zhang, Gang Sheng and Fangwei Xie

A hybrid grey-based fuzzy C-means and multiple objective genetic algorithms for project portfolio selection pp. 154-179

Farshad Faezy Razi, Abbas Toloie Eshlaghy, Jamshid Nazemi, Mahmood Alborzi and Alireza Poorebrahimi

Critical success factors of knowledge management: modelling and comparison using various techniques pp. 180-206

Sanjay Kumar, Vinay Singh and Abid Haleem

Automated guided vehicle configurations in flexible manufacturing systems: a comparative study pp. 207-226

Ravindra Kumar, Abid Haleem, Suresh K. Garg and Rajesh K. Singh

Study on a new intelligent PLC with switch management pp. 227-241

GuangFu Wang

Leagility index in supply chain - part-II: case applications, benchmarking and comparative analysis pp. 242-276

Arnab Banerjee and Saroj Kumar Mukhopadhyay

Volume 21, issue 1, 2015

Define value: applying the first lean principle to product development pp. 1-30

Muhammad S. Khan, Ahmed Al-Ashaab, Essam Shehab, Endris Kerga, Celine Martin and Paul Ewers

An effective chart to monitor process averages for serial correlation using ANN approach pp. 31-49

D.R. Prajapati and Sukhraj Singh

Fuzzy evaluation modelling to assess organisational agility pp. 50-67

Chitrasen Samantra, Saurav Datta, Swagatika Mishra and Siba Sankar Mahapatra

Inventory model with stock dependent demand and different holding cost functions pp. 68-82

R.P. Tripathi and Dinesh Singh

Control system for micro milling machine pp. 83-98

Xinxin Wang, Xiaohong Lu, Zhenyuan Jia, Wentao Wang and Fengchen Wang

Optimal designing of variables tightened-normal-tightened sampling scheme by minimising the average sample number pp. 99-118

S. Balamurali and M. Usha

A possibilistic mixed-integer linear programme for dynamic closed-loop supply chain network design under uncertainty pp. 119-140

Fatemeh Zare and M.M. Lotfi

Volume 20, issue 4, 2015

Threshold switch over policy for multi-component machining system with controllable rates pp. 397-414

Madhu Jain, Varsha Rani and Rekha Kumari

Robust planning models for uncertain emergency evacuation problem pp. 415-436

Yaping Qu and Hui Yu

On the generation and selection of solutions to multiple response problems pp. 437-456

Nuno Ricardo Costa and João Lourenço

A study on the importance of selection rules within unbalanced MTO POLCA-controlled production systems pp. 457-468

Marcello Braglia, Davide Castellano and Marco Frosolini

University hall furniture design based on anthropometry: an artificial neural network approach pp. 469-482

Tanveer Hossain Bhuiyan and Md. Shahriar Jahan Hossain

Optimal production and preventive maintenance rate in a failure-prone manufacturing system using discrete event simulation pp. 483-496

Shahab Amelian, Seyed Mojtaba Sajadi and Mahdi Alinaghian

Per-unit cost minimisation of the newsvendor problem pp. 497-515

M.A. Darwish, Abdulrahman R. Alenezi and Majid M. Aldaihani

Volume 20, issue 3, 2015

Analysis of nonlinear adaptive cruise control vehicle model during cut-in manoeuvre pp. 263-280

Zeeshan Ali, Saleh Jummani, Yasin Shaikh and Hussain Bux Marri

Estimation of manpower requirement for field research: a sample survey approach pp. 281-305

Pathik Mandal, Tirthankar Dasgupta and S.V.S.N. Murthy

Determination of optimal production rate in stochastic manufacturing systems by simulation optimisation approach pp. 306-322

Mansoureh Farzam Rad, Seyed Mojtaba Sajadi and Ali Hosseinzadeh Kashan

A hybrid grey-based KOHONEN and genetic algorithm to integrated technology selection pp. 323-342

Abbas Toloie Eshlaghy and Farshad Faezy Razi

Integrating sustainability assessments in manufacturing enterprises: a framework approach pp. 343-368

Ibrahim H. Garbie

Maximum entropy analysis of bulk arrival retrial queue with second optional service and Bernoulli vacation pp. 369-396

Madhu Jain, Richa Sharma and G.C. Sharma

Volume 20, issue 2, 2015

Enhancement of the overall equipment effectiveness measure: a contribution for handling uncertainty in shop floor optimisation and production planning pp. 141-154

Markus Philipp Roessler and Eberhard Abele

Meta-analysis of the TQM impact on business performance amongst regions and countries pp. 155-164

M.F. Ahmad, N. Zakuan, J. Ahmad and J. Takala

The multi-objective optimisation design for a light guide rod pp. 165-179

Yu-Sen Yang, Chun-Yao Shih, Hong-Yao Chien and Rong-Fong Fung

Flood disaster water treatment solution from existing and common ideas with two versions of MSWT-01 pp. 180-191

Albertus B. Setiawan, Gamawan Ananto and M.Z. Darman

Application of ant colony algorithm in the simulation-based approach to improve airport surface operations pp. 192-208

Wenbin Wei, Lawrence Davis, Chunsheng Fu and Yanan Ding

Configuration selection of reconfigurable manufacturing system based on performance pp. 209-230

Ashutosh Gupta, Pramod K. Jain and Dinesh Kumar

Selecting the best operational strategy for job shop system: an ANP approach pp. 231-262

Rishu Sharma and Suresh Garg

Volume 20, issue 1, 2015

Justification of reconfigurable manufacturing systems selection using extended Brown-Gibson model and fuzzy TOPSIS pp. 1-21

M. Maniraj and V. Pakkirisamy

Vendor managed inventory models for single-vendor multi-retailer supply chains with quality consideration pp. 22-57

Mohammed A. Darwish, Osama M. Odah and Suresh Kumar Goyal

Contact-based motion graph and its application in locomotion synthesis for virtual actors pp. 58-68

Xiaopeng Wei, Pengfei Yi and Qiang Zhang

The use of statistical process control techniques in the web application products pp. 69-83

Fikri Dweiri, Sharfuddin Ahmed Khan and Muhammad Shamsuzzaman

Geometric parameters interval estimation of hydraulic valve by combining interval grey correlation analysis and ANFIS pp. 84-103

Jian-wei Ma, Zhen-yuan Jia, Fu-ji Wang and Wei Liu

Lean methodologies to improve assembly line efficiency: an industrial application pp. 104-116

Kaneesa Kanaganayagam, Shanthi Muthuswamy and Purushothaman Damodaran

Decision-making for materials selection using fuzzy axiomatic design principles pp. 117-138

Anant V. Khandekar and Shankar Chakraborty